public static void Unzip(Stream inStream, Stream outStream)
{
byte[] array = new byte[5];
if (inStream.Read(array, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(array);
long num = 0L;
for (int i = 0; i < 8; i++)
{
int num2 = inStream.ReadByte();
if (num2 < 0)
{
throw new Exception("Can't Read 1");
}
num |= (long)((byte)num2) << 8 * i;
}
long inSize = inStream.Length - inStream.Position;
decoder.Code(inStream, outStream, inSize, num, null);
}
public static Bitmap DecompressFileLZMA(string file)
{
using MemoryStream spriteBuffer = new MemoryStream();
Decoder decoder = new Decoder();
using BinaryReader reader = new BinaryReader(File.OpenRead(file));
/*
* CIP's header, 32 bytes
*
* Padded with a variable number of NULL bytes (depending on LZMA file size) at the start then the constant
* byte sequence of "70 0A FA 80 24" followed by the LZMA file size encoded as a 7-bit integer
*/
// Since there may be a variable number of NULL bytes just loop until we get through them all, then skip past
// the remaining 4 bytes of the constant (really should check their values for file validity but just assume it is)
while (reader.ReadByte() == 0)
{
}
reader.ReadUInt32();
while ((reader.ReadByte() & 0x80) == 0x80)
{
} // LZMA size, 7-bit integer where MSB = flag for next byte used
decoder.SetDecoderProperties(reader.ReadBytes(5));
reader.ReadUInt64(); // Should be the decompressed size but CIP writes the compressed sized, so just use a large buffer size
// Disabled arithmetic underflow/overflow check in debug mode so this won't cause an exception
spriteBuffer.Position = 0;
decoder.Code(reader.BaseStream, spriteBuffer, reader.BaseStream.Length - reader.BaseStream.Position, -1, null);
spriteBuffer.Position = 0;
decoder = null;
return(new Bitmap(spriteBuffer));
}
/// <inheritdoc/>
protected override void BaseDecompress(Stream inputStream, Stream outputStream)
{
using (MemoryStream inputMemory = new MemoryStream())
{
inputStream.CopyTo(inputMemory);
inputStream.Flush();
inputMemory.Flush();
inputMemory.Position = 0;
var decoder = new Decoder();
// Read the decoder properties
var properties = new byte[5];
inputMemory.Read(properties, 0, 5);
decoder.SetDecoderProperties(properties);
// Read in the decompress file size.
var fileLengthBytes = new byte[8];
inputMemory.Read(fileLengthBytes, 0, 8);
var fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
// Decode
decoder.Code(inputMemory, outputStream, inputMemory.Length, fileLength, null);
outputStream.Flush();
}
}
/// <summary>
/// Decompress engine's LZMA stream. Return new decompressed MemoryStream
/// BaseStream don't contains 'decompress size'
/// </summary>
/// <param name="baseStream">LZMA compressed stream</param>
/// <param name="compressSize">Compressed data length</param>
/// <param name="decompressedStream">Stream for decompressed output</param>
/// <param name="decompreesSize">Decompressed data length</param>
/// <returns>Decompressed MemoryStream</returns>
public static void DecompressLZMAStream(Stream baseStream, long compressSize, Stream decompressedStream, long decompreesSize)
{
long basePosition = baseStream.Position;
byte[] properties = new byte[PropertiesSize];
int read = baseStream.Read(properties, 0, PropertiesSize);
if (read != PropertiesSize)
{
throw new Exception("Unable to read lzma properties");
}
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(properties);
long headSize = baseStream.Position - basePosition;
long headlessSize = compressSize - headSize;
long startPosition = decompressedStream.Position;
decoder.Code(baseStream, decompressedStream, headlessSize, decompreesSize, null);
if (baseStream.Position > basePosition + compressSize)
{
throw new Exception($"Read {baseStream.Position - basePosition} more than expected {compressSize}");
}
baseStream.Position = basePosition + compressSize;
decompressedStream.Position = startPosition;
}
public static void Decompress(Stream input, Stream output, Action <long, long> onProgress = null)
{
var decoder = new Decoder();
byte[] properties = new byte[5];
if (input.Read(properties, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
decoder.SetDecoderProperties(properties);
long fileLength = 0;
for (int i = 0; i < 8; i++)
{
int v = input.ReadByte();
if (v < 0)
{
throw new Exception("Can't Read 1");
}
fileLength |= ((long)(byte)v) << (8 * i);
}
ICodeProgress prg = null;
if (onProgress != null)
{
prg = new DelegateCodeProgress(onProgress);
}
long compressedSize = input.Length - input.Position;
decoder.Code(input, output, compressedSize, fileLength, prg);
}
private static byte[] Decompress(byte[] inputBytes)
{
MemoryStream newInStream = new MemoryStream(inputBytes);
Decoder decoder = new Decoder();
newInStream.Seek(0, 0);
MemoryStream newOutStream = new MemoryStream();
byte[] properties2 = new byte[5];
if (newInStream.Read(properties2, 0, 5) != 5)
{
throw (new Exception("input .lzma is too short"));
}
long outSize = 0;
for (int i = 0; i < 8; i++)
{
int v = newInStream.ReadByte();
if (v < 0)
{
throw (new Exception("Can't Read 1"));
}
outSize |= ((long)(byte)v) << (8 * i);
}
decoder.SetDecoderProperties(properties2);
long compressedSize = newInStream.Length - newInStream.Position;
decoder.Code(newInStream, newOutStream, compressedSize, outSize, null);
byte[] b = newOutStream.ToArray();
return(b);
}
private static byte[] DecodeLzma(byte[] lzmaByteArray)
{
byte[] result = null;
Decoder decoder = new Decoder();
using (MemoryStream memoryStream = new MemoryStream(lzmaByteArray))
{
memoryStream.Seek(0L, SeekOrigin.Begin);
using (MemoryStream memoryStream2 = new MemoryStream())
{
byte[] array = new byte[5];
if (memoryStream.Read(array, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
long num = 0L;
for (int i = 0; i < 8; i++)
{
int num2 = memoryStream.ReadByte();
if (num2 < 0)
{
throw new Exception("Can't Read 1");
}
num |= (long)((long)((ulong)((byte)num2)) << 8 * i);
}
decoder.SetDecoderProperties(array);
long inSize = memoryStream.Length - memoryStream.Position;
decoder.Code(memoryStream, memoryStream2, inSize, num, null);
result = memoryStream2.ToArray();
}
}
return(result);
}
public bool Decrypt(Stream inStream, Stream outStream, bool removeJunk = false, int junkSize = 4)
{
if (removeJunk)
{
inStream.Seek((long)junkSize, SeekOrigin.Begin);
}
byte[] numArray = new byte[5];
if (inStream.Read(numArray, 0, 5) != 5)
{
return(false);
}
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(numArray);
long outSize = 0L;
for (int index = 0; index < 8; ++index)
{
int num = inStream.ReadByte();
if (num < 0)
{
return(false);
}
outSize |= (long)(byte)num << 8 * index;
}
long inSize = inStream.Length - inStream.Position;
decoder.Code(inStream, outStream, inSize, outSize, (ICodeProgress)null);
return(true);
}
public static void ExpandNatives()
{
Decoder decoder = new Decoder();
MemoryStream output = new MemoryStream();
using (Stream input = File.Open(Path.Combine(DotMinecraft, "bin/" + GetNativeArchiveFile()), FileMode.Open))
{
Decoder coder = new Decoder();
byte[] properties = new byte[5];
input.Read(properties, 0, 5);
// Read in the decompress file size.
byte[] fileLengthBytes = new byte[8];
input.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
coder.SetDecoderProperties(properties);
coder.Code(input, output, input.Length, fileLength, null);
}
output.Seek(0, SeekOrigin.Begin);
FastZip fastZip = new FastZip();
fastZip.ExtractZip(output, Path.Combine(DotMinecraft, "bin/natives"), FastZip.Overwrite.Always, null, "", "", false, false);
File.Delete(Path.Combine(DotMinecraft, "bin/" + GetNativeArchiveFile()));
}
public static byte[] Decompress(byte[] inputBytes)
{
var memoryStream1 = new MemoryStream(inputBytes);
var decoder = new Decoder();
memoryStream1.Seek(0L, SeekOrigin.Begin);
var memoryStream2 = new MemoryStream();
var numArray = new byte[5];
if (memoryStream1.Read(numArray, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
var outSize = 0L;
for (var index = 0; index < 8; ++index)
{
var num = memoryStream1.ReadByte();
if (num < 0)
{
throw new Exception("Can't Read 1");
}
outSize |= (long)(byte)num << 8 * index;
}
decoder.SetDecoderProperties(numArray);
var inSize = memoryStream1.Length - memoryStream1.Position;
decoder.Code(memoryStream1, memoryStream2, inSize, outSize, null);
return(memoryStream2.ToArray());
}
public static MemoryStream Decompress(Stream inStream, int lengthPadding = 0)
{
var decoder = new Decoder();
var newOutStream = new MemoryStream();
var properties2 = new byte[5];
if (inStream.Read(properties2, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
long outSize = 0;
for (var i = 0; i < 8; i++)
{
var v = inStream.ReadByte();
if (v < 0)
{
throw new Exception("Can't Read 1");
}
outSize |= (long)(byte)v << (8 * i);
}
decoder.SetDecoderProperties(properties2);
var compressedSize = inStream.Length - inStream.Position - lengthPadding;
decoder.Code(inStream, newOutStream, compressedSize, outSize, null);
return(newOutStream);
}
/// <summary>
/// Decompresses the specified bytes using LZMA and the
/// <see cref="CompressionSettings"/> that have been used to originally compress the bytes.
/// </summary>
/// <param name="compressedBytes">The compressed <c>byte[]</c> array that you want to decompress.</param>
/// <param name="compressionSettings">The <see cref="CompressionSettings"/> that have been used to compress the bytes.</param>
/// <returns>The decompressed <c>bytes[]</c>.</returns>
public byte[] Decompress(byte[] compressedBytes, CompressionSettings compressionSettings)
{
if (ReferenceEquals(compressedBytes, null))
{
return(null);
}
if (compressedBytes.Length == 0)
{
return(Array.Empty <byte>());
}
byte[] decompressedBytes;
var decoder = new Decoder();
MemoryStream input = new MemoryStream(compressedBytes);
MemoryStream output = new MemoryStream(compressedBytes.Length / 2 * 3);
try
{
input.Seek(0, 0);
byte[] props = new byte[5];
if (input.Read(props, 0, 5) != 5)
{
throw new InvalidDataException($"{nameof(LzmaUtility)}: input LZMA data is too short. Returning null...");
}
long outSize = 0;
for (int i = 0; i < 8; i++)
{
int v = input.ReadByte();
if (v < 0)
{
throw new InvalidDataException($"{nameof(LzmaUtility)}: Can't read byte at {nameof(input)} position \"{input.Position}\"...");
}
outSize |= ((long)(byte)v) << (8 * i);
}
decoder.SetDecoderProperties(props);
long compressedSize = input.Length - input.Position;
decoder.Code(input, output, compressedSize, outSize, null);
decompressedBytes = output.ToArray();
}
catch (Exception e)
{
string msg = $"{nameof(LzmaUtility)}: Decompression failed; thrown exception: {e.ToString()}";
throw new InvalidDataException(msg);
}
finally
{
input.Dispose();
output.Dispose();
}
return(decompressedBytes);
}
public static void DecompressFile(FileInfo fi)
{
try
{
String outputName = fi.FullName.Substring(0, fi.FullName.Length - COMPRESSED_SUFFIX.Length);
using (FileStream inStream = fi.OpenRead())
{
using (FileStream outStream = new FileStream(outputName, FileMode.Create, FileAccess.Write))
{
Decoder decoder = new Decoder();
BinaryReader reader = new BinaryReader(inStream);
long outSize = reader.ReadInt64();
long compressedSize = inStream.Length - inStream.Position;
byte[] properties = new byte[5];
if (inStream.Read(properties, 0, 5) != 5)
{
throw (new Exception("input is too short"));
}
decoder.SetDecoderProperties(properties);
decoder.Code(inStream, outStream, compressedSize, outSize, null);
}
}
}
catch (Exception e)
{
System.Console.WriteLine("Exception DecompressFile: " + e.GetType() + " " + e.Message);
throw e;
}
}
/// <summary>
/// Decompress a CSV or SC File
/// CSV Compressiontype: Lzma
/// SC Compressiontype: Lzmha
/// </summary>
/// <param name="inStream"></param>
/// <param name="type"></param>
/// <returns></returns>
public byte[] Decompress(Stream inStream, CompressionType type)
{
var stream = new MemoryStream();
var decoder = new Decoder();
if (type == CompressionType.Lzmha)
{
inStream.Seek(26, SeekOrigin.Current);
}
var properties = new byte[5];
if (inStream.Read(properties, 0, 5) < 5)
{
throw new Exception("Invalid properties.");
}
var buffer = new byte[4];
inStream.Read(buffer, 0, 4);
decoder.SetDecoderProperties(properties);
decoder.Code(inStream, stream, inStream.Length, BitConverter.ToInt32(buffer, 0), null);
inStream.Flush();
inStream.Close();
return(stream.ToArray());
}
protected override RecordNode DecodeDelegate()
{
byte[] value = (compressedNode.Values[0] as EsfValueNode <byte[]>).Value;
ParentNode parentNode = compressedNode.Children[0];
uint value2 = (parentNode.Values[0] as EsfValueNode <uint>).Value;
byte[] value3 = (parentNode.Values[1] as EsfValueNode <byte[]>).Value;
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(value3);
byte[] array = new byte[value2];
using (MemoryStream inStream = new MemoryStream(value, writable: false))
{
using (MemoryStream memoryStream = new MemoryStream(array))
{
decoder.Code(inStream, memoryStream, value.Length, value2, null);
array = memoryStream.ToArray();
}
}
AbcaFileCodec abcaFileCodec = new AbcaFileCodec();
EsfNode esfNode = abcaFileCodec.Parse(array);
using (BinaryReader reader = new BinaryReader(new MemoryStream(array)))
{
esfNode = abcaFileCodec.Parse(reader);
}
return(esfNode as RecordNode);
}
public Task <byte[]> Decompress(byte[] data)
{
using (var sourceStream = new MemoryStream(data))
using (var destStream = new MemoryStream())
{
var coder = new Decoder();
// Read the decoder properties
var properties = new byte[5];
sourceStream.Read(properties, 0, 5);
// Read in the decompressed file size.
var fileLengthBytes = new byte[8];
sourceStream.Read(fileLengthBytes, 0, 8);
var fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
coder.SetDecoderProperties(properties);
coder.Code(sourceStream, destStream, sourceStream.Length, fileLength, null);
destStream.Flush();
return(Task.FromResult(destStream.ToArray()));
}
}
private void DoDecompressFileLZMA()
{
try
{
MemoryStream input = new MemoryStream(deInBytes);
MemoryStream output = new MemoryStream();
byte[] properties = new byte[5];
input.Read(properties, 0, 5);
byte[] fileLengthBytes = new byte[8];
input.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
deCoder = new Decoder();
deCoder.SetDecoderProperties(properties);
deCoder.Code(input, output, input.Length, fileLength, null);
output.Flush();
deOutBytes = output.ToArray();
output.Close();
input.Close();
}
catch (System.Exception ex)
{
Debug.LogError(ex.Message + "\n" + ex.StackTrace);
}
decompressBytesLZMAFinish = true;
}
public string GetText()
{
using (MemoryStream memory = new MemoryStream())
{
using (Stream input = File.OpenRead(@"Resources\Large.7z"))
{
Decoder coder = new Decoder();
// Read the decoder properties
byte[] properties = new byte[5];
input.Read(properties, 0, 5);
// Read in the decompress file size.
byte[] fileLengthBytes = new byte[8];
input.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
coder.SetDecoderProperties(properties);
coder.Code(input, memory, input.Length, fileLength, null);
memory.Flush();
}
memory.Seek(0, SeekOrigin.Begin);
using (TextReader reader = new StreamReader(memory))
{
return(reader.ReadToEnd());
}
}
}
bool ReadChunk()
{
var read = BaseStream.Read(propertyBuffer, 0, propertyBuffer.Length);
if (read == 0)
{
return(false);
}
long chunkSize = 0;
if (read != propertyBuffer.Length || !BaseStream.TryReadInt64(out chunkSize))
{
throw CorruptionFound();
}
if (bufferStream.Length != chunkSize)
{
bufferStream.SetLength(chunkSize);
}
if (chunkSize == 0)
{
return(false);
}
bufferStream.Position = 0;
decoder.SetDecoderProperties(propertyBuffer);
decoder.Code(BaseStream, bufferStream, -1, chunkSize, null);
bufferStream.Position = 0;
return(true);
}
/// <summary>
/// Decompresses an LZMA stream.
/// </summary>
/// <param name="sourceFile">The file containing the LZMA compressed stream.</param>
/// <param name="destinationFile">The output file containing the decompressed LZMA stream.</param>
public static void Decompress(string sourceFile, string destinationFile)
{
string destinationDir = Path.GetDirectoryName(destinationFile);
if (!Directory.Exists(destinationDir))
{
Directory.CreateDirectory(destinationDir);
}
using (FileStream inFile = new FileStream(sourceFile, FileMode.Open))
using (FileStream outFile = new FileStream(destinationFile, FileMode.Create))
{
Decoder decoder = new Decoder();
byte[] properties = new byte[5];
byte[] fileLengthBytes = new byte[8];
inFile.Read(properties, 0, 5);
inFile.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
decoder.SetDecoderProperties(properties);
decoder.Code(inFile, outFile, inFile.Length, fileLength, progress: null);
}
}
/// <summary>
/// Decompress engine's LZMA stream. Write decomressed data to decompressedStream.
/// BaseStream contains 'decompress size'
/// </summary>
/// <param name="baseStream">LZMA compressed stream</param>
/// <param name="compressSize">Compressed data length</param>
/// <param name="decompressedStream">Decompressed out stream</param>
public static void DecompressLZMASizeStream(Stream baseStream, long compressSize, Stream decompressedStream)
{
long basePosition = baseStream.Position;
byte[] properties = new byte[PropertiesSize];
baseStream.ReadBuffer(properties, 0, PropertiesSize);
byte[] countBuffer = new byte[CountSize];
baseStream.ReadBuffer(countBuffer, 0, CountSize);
long decompressedSize = BitConverter.ToInt64(countBuffer, 0);
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(properties);
long headSize = baseStream.Position - basePosition;
long dataSize = compressSize - headSize;
long startPosition = decompressedStream.Position;
decoder.Code(baseStream, decompressedStream, dataSize, decompressedSize, null);
if (baseStream.Position > basePosition + compressSize)
{
throw new Exception($"Read {baseStream.Position - basePosition} more than expected {compressSize}");
}
baseStream.Position = basePosition + compressSize;
decompressedStream.Position = startPosition;
}
internal static void Decompress(Stream inputStream, Stream outputStream)
{
var decoder = new Decoder();
byte[] properties = new byte[5];
if (inputStream.Read(properties, 0, 5) != 5)
{
throw (new Exception("input .lzma is too short"));
}
decoder.SetDecoderProperties(properties);
long outSize = 0;
for (int i = 0; i < 8; i++)
{
int v = inputStream.ReadByte();
if (v < 0)
{
throw (new Exception("Can't Read 1"));
}
outSize |= ((long)(byte)v) << (8 * i);
}
long compressedSize = inputStream.Length - inputStream.Position;
decoder.Code(inputStream, outputStream, inputStream.Length, -1, null);
}
static bool LAMPjieyasuo(string filein, string outfile)
{
try
{
if (!File.Exists(filein))
{
return(false);
}
FileStream insStream = new FileStream(filein, FileMode.Open);
FileStream outStream = new FileStream(outfile, FileMode.OpenOrCreate);
//duqu properties
byte[] properies = new byte[5];
insStream.Read(properies, 0, 5);
byte[] filelength = new byte[8];
insStream.Read(filelength, 0, 8);
long length = BitConverter.ToInt64(filelength, 0);
Decoder decoder = new Decoder();
decoder.SetDecoderProperties(properies);
decoder.Code(insStream, outStream, insStream.Length, length, null);
outStream.Flush();
outStream.Close();
insStream.Close();
}
catch (Exception e)
{
Console.WriteLine(e);
throw;
}
return(false);
}
public static MemoryStream Decompress(Stream inStream)
{
Decoder decoder = new Decoder();
byte[] properties = new byte[5];
if (inStream.Read(properties, 0, 5) != 5)
{
throw (new Exception("input .lzma is too short"));
}
decoder.SetDecoderProperties(properties);
long outSize = 0;
for (int i = 0; i < 8; i++)
{
int v = inStream.ReadByte();
if (v < 0)
{
break;
}
outSize |= ((long)(byte)v) << (8 * i);
}
long compressedSize = inStream.Length - inStream.Position;
var outStream = new MemoryStream();
decoder.Code(inStream, outStream, compressedSize, outSize, null);
outStream.Flush();
outStream.Position = 0;
return(outStream);
}
private static void DeCompress(object obj)
{
FileChangeInfo fileChangeInfo = (FileChangeInfo)obj;
string inpath = fileChangeInfo.inpath;
string outpath = fileChangeInfo.outpath;
CodeProgress progress = null;
if (fileChangeInfo.progressDelegate != null)
{
progress = new CodeProgress(fileChangeInfo.progressDelegate);
}
try
{
Decoder decoder = new Decoder();
FileStream fileStream = new FileStream(inpath, FileMode.Open);
progress.fileSize = fileStream.Length;
FileStream fileStream2 = new FileStream(outpath, FileMode.Create);
int num = 5;
byte[] array = new byte[num];
fileStream.Read(array, 0, array.Length);
byte[] array2 = new byte[8];
fileStream.Read(array2, 0, 8);
long outSize = BitConverter.ToInt64(array2, 0);
decoder.SetDecoderProperties(array);
decoder.Code(fileStream, fileStream2, fileStream.Length, outSize, progress);
fileStream2.Flush();
fileStream2.Close();
fileStream.Close();
Debug.Log("解压完毕");
}
catch (Exception ex)
{
Debug.Log(ex);
}
}
public byte[] Decompress(byte[] compressedBytes)
{
using (var inputStream = new MemoryStream(compressedBytes))
using (var outputStream = new MemoryStream())
{
Decoder decoder = new Decoder();
byte[] properties = new byte[5];
if (inputStream.Read(properties, 0, 5) != 5)
{
throw new Exception();
}
decoder.SetDecoderProperties(properties);
long outSize = 0;
for (int i = 0; i < 8; i++)
{
int v = inputStream.ReadByte();
outSize |= ((long)(byte)v) << (8 * i);
}
long compressedSize = inputStream.Length - inputStream.Position;
decoder.Code(inputStream, outputStream, compressedSize, outSize, null);
outputStream.Flush();
return(outputStream.ToArray());
}
}
public static MemoryStream StreamDecompress(MemoryStream inStream)
{
var decoder = new Decoder();
inStream.Seek(0, SeekOrigin.Begin);
var newOutStream = new MemoryStream();
var properties = new byte[5];
if (inStream.Read(properties, 0, 5) != 5)
{
throw new Exception("input .lzma is too short");
}
long outSize = 0;
for (var i = 0; i < 8; i++)
{
var v = inStream.ReadByte();
if (v < 0)
{
throw new Exception("Can't Read 1");
}
outSize |= ((long)(byte)v) << (8 * i);
}
decoder.SetDecoderProperties(properties);
var compressedSize = inStream.Length - inStream.Position;
decoder.Code(inStream, newOutStream, compressedSize, outSize, null);
newOutStream.Position = 0;
return(newOutStream);
}
/// <summary>
/// 使用LZMA算法解压文件
/// </summary>
static bool DecompressFileLZMA(string inFile, string outFile)
{
try
{
if (!File.Exists(inFile))
{
return(false);
}
FileStream input = new FileStream(inFile, FileMode.Open);
FileStream output = new FileStream(outFile, FileMode.OpenOrCreate);
byte[] properties = new byte[5];
input.Read(properties, 0, 5);
byte[] fileLengthBytes = new byte[8];
input.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
Decoder coder = new Decoder();
coder.SetDecoderProperties(properties);
coder.Code(input, output, input.Length, fileLength, null);
output.Flush();
output.Close();
input.Close();
}
catch (System.Exception ex)
{
Debug.LogError(ex.Message);
}
return(false);
}
/// <inheritdoc/>
protected override async Task BaseDecompressAsync(Stream inputStream, Stream outputStream, CancellationToken cancellationToken = default)
{
using (MemoryStream inputMemory = new MemoryStream())
{
await inputStream.CopyToAsync(inputMemory, DefaultBufferSize, cancellationToken).ConfigureAwait(false);
await inputStream.FlushAsync(cancellationToken).ConfigureAwait(false);
await inputMemory.FlushAsync(cancellationToken).ConfigureAwait(false);
inputMemory.Position = 0;
var decoder = new Decoder();
// Read the decoder properties
var properties = new byte[5];
await inputMemory.ReadAsync(properties, 0, 5, cancellationToken).ConfigureAwait(false);
decoder.SetDecoderProperties(properties);
// Read in the decompress file size.
var fileLengthBytes = new byte[8];
await inputMemory.ReadAsync(fileLengthBytes, 0, 8, cancellationToken).ConfigureAwait(false);
var fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
// Decode
decoder.Code(inputMemory, outputStream, inputMemory.Length, fileLength, null);
await outputStream.FlushAsync(cancellationToken).ConfigureAwait(false);
}
}
private void DoDecompressFileLZMA()
{
try
{
if (!File.Exists(deInFile))
{
decompressFileLZMAFinish = true;
return;
}
FileStream input = new FileStream(deInFile, FileMode.Open);
FileStream output = new FileStream(deOutFile, FileMode.OpenOrCreate);
byte[] properties = new byte[5];
input.Read(properties, 0, 5);
byte[] fileLengthBytes = new byte[8];
input.Read(fileLengthBytes, 0, 8);
long fileLength = BitConverter.ToInt64(fileLengthBytes, 0);
deCoder = new Decoder();
deCoder.SetDecoderProperties(properties);
deCoder.Code(input, output, input.Length, fileLength, null);
output.Flush();
output.Close();
input.Close();
}
catch (System.Exception ex)
{
Debug.LogError(ex.Message);
}
decompressFileLZMAFinish = true;
}
