private void Disconnect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== UpdateFW Disconnect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
//ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, true);
////If update progress is running, doesn't hide "Updtae" button which shows "Stop".
//if (m_clsBackThread.IsBusy == false)
//{
// btnUpdate.Enabled = false;
//}
}
//==========================Other=========================================
private DEV_MODE AskMode()
{
Result result = Result.FAILURE;
do
{
//Check BL Mode
result = GetVersion(DEV_MODE.BL);
if (Result.OK == result)
{
m_Mode = DEV_MODE.BL;
break;
}
else if (Result.FWUPD_CMD_IGN == result)
{
m_Mode = DEV_MODE.BL_ENTER_UPDATE;
break;
}
//Check AP mode
if (Result.OK == GetVersion(DEV_MODE.AP))
{
m_Mode = DEV_MODE.AP;
break;
}
m_Mode = DEV_MODE.NO;
}while(false);
return(m_Mode);
}
//private Result GetVersion( DEV_MODE r_mode )
private Result GetVersion()
{
MacBootLoaderVersion Version = new MacBootLoaderVersion();
Result result = Result.FAILURE;
m_Mode = DEV_MODE.NO;
FirmwareVersion ver = new FirmwareVersion();
result = m_clsInterface.API_MacGetFirmwareVersion(ref ver);
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[FW] {0}.{1}.{2}", ver.major, ver.minor, ver.release));
//ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[FW] {0}.{1}.{2}",ver.major,ver.minor,ver.release) );
//Show device type
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, rfid.clsPacket.TRANS_API_AskDevType().ToString());
return(Result.OK);
}
private void Disconnect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== UpdateFW Disconnect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
}
private void Connect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("======UpdateFW Connect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
//btnUpdate.Enabled = false;
ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, false);
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
//open the device
if (true == OpenDevice())
{
//Enable Item
btnUpdate.Enabled = true;
//If update progress is running, hide "device Interface" item.
if (m_clsBackThread.IsBusy == false)
{
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, true);
}
}
////If update progress is running, hide "Set Com Port" item.
//if (m_clsBackThread.IsBusy == false)
//{
// //always enable "set com port" item to let user set uless update progress is running.
// SetComPortToolStripMenuItem.Enabled = true;
//}
ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, true);
}
private Result GetVersion(DEV_MODE r_mode)
{
MacBootLoaderVersion Version = new MacBootLoaderVersion();
Result result = Result.FAILURE;
m_Mode = DEV_MODE.NO;
switch (r_mode)
{
case DEV_MODE.AP:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get FW AP Version======");
#endif
FirmwareVersion ver = new FirmwareVersion();
result = m_clsInterface.API_MacGetFirmwareVersion(ref ver);
if (Result.OK != result)
{
//ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get AP version");
return(result);
}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[AP] {0}.{1}.{2}", ver.major, ver.minor, ver.release));
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[AP] {0}.{1}.{2}", ver.major, ver.minor, ver.release));
m_Mode = DEV_MODE.AP;
break;
case DEV_MODE.BL:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get BL AP Version======");
#endif
result = m_clsInterface.API_UpdataGetVersion(ref Version);
if (Result.OK != result)
{
//ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get bootloader version");
return(result);
}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[BL] {0}.{1}.{2}", Version.major, Version.minor, Version.release));
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[BL] {0}.{1}.{2}", Version.major, Version.minor, Version.release));
m_Mode = DEV_MODE.BL;
break;
case DEV_MODE.BL_ENTER_UPDATE:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get BL_ENTER_UPDATE Version======");
#endif
//result = m_clsInterface.API_UpdataGetVersion(ref Version);
//if (result != Result.OK && result != Result.FWUPD_CMD_IGN)
//{
// //ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get bootloader version");
// return result;
//}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "[BL] Update Mode.");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Enter update Mode.");
m_Mode = DEV_MODE.BL_ENTER_UPDATE;
break;
default:
m_Mode = DEV_MODE.NO;
return(Result.FAILURE);
break;
}
//Show device type
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, rfid.clsPacket.TRANS_API_AskDevType().ToString());
return(Result.OK);
}
private Result GetVersion( DEV_MODE r_mode )
{
MacBootLoaderVersion Version = new MacBootLoaderVersion();
Result result = Result.FAILURE;
m_Mode = DEV_MODE.NO;
switch (r_mode)
{
case DEV_MODE.AP:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get FW AP Version======");
#endif
FirmwareVersion ver = new FirmwareVersion();
result = m_clsInterface.API_MacGetFirmwareVersion(ref ver);
if (Result.OK != result)
{
//ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get AP version");
return result;
}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[AP] {0}.{1}.{2}",ver.major,ver.minor,ver.release) );
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[AP] {0}.{1}.{2}",ver.major,ver.minor,ver.release) );
m_Mode = DEV_MODE.AP;
break;
case DEV_MODE.BL:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get BL AP Version======");
#endif
result = m_clsInterface.API_UpdataGetVersion(ref Version);
if (Result.OK != result)
{
//ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get bootloader version");
return result;
}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[BL] {0}.{1}.{2}",Version.major,Version.minor,Version.release) );
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[BL] {0}.{1}.{2}",Version.major,Version.minor,Version.release) );
m_Mode = DEV_MODE.BL;
break;
case DEV_MODE.BL_ENTER_UPDATE:
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== Get BL_ENTER_UPDATE Version======");
#endif
//result = m_clsInterface.API_UpdataGetVersion(ref Version);
//if (result != Result.OK && result != Result.FWUPD_CMD_IGN)
//{
// //ControlItem(ENUM_ITEM_TYPE.STATUS, "Can't get bootloader version");
// return result;
//}
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "[BL] Update Mode." );
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Enter update Mode." );
m_Mode = DEV_MODE.BL_ENTER_UPDATE;
break;
default:
m_Mode = DEV_MODE.NO;
return Result.FAILURE;
break;
}
//Show device type
ControlItem( ENUM_ITEM_TYPE.TEXT_DEVICE, rfid.clsPacket.TRANS_API_AskDevType().ToString() );
return Result.OK;
}
private void Disconnect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== UpdateFW Disconnect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
//ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, true);
////If update progress is running, doesn't hide "Updtae" button which shows "Stop".
//if (m_clsBackThread.IsBusy == false)
//{
// btnUpdate.Enabled = false;
//}
}
private void Connect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("======UpdateFW Connect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
//btnUpdate.Enabled = false;
ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, false);
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
//open the device
if (true == OpenDevice())
{
//Enable Item
btnUpdate.Enabled = true;
//If update progress is running, hide "device Interface" item.
if(m_clsBackThread.IsBusy == false)
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, true);
}
////If update progress is running, hide "Set Com Port" item.
//if (m_clsBackThread.IsBusy == false)
//{
// //always enable "set com port" item to let user set uless update progress is running.
// SetComPortToolStripMenuItem.Enabled = true;
//}
ControlItem(ENUM_ITEM_TYPE.MENU_SET_COM_PORT, true);
}
//==========================Other=========================================
private DEV_MODE AskMode()
{
Result result = Result.FAILURE;
do
{
//Check BL Mode
result = GetVersion(DEV_MODE.BL);
if ( Result.OK == result )
{
m_Mode = DEV_MODE.BL;
break;
}
else if( Result.FWUPD_CMD_IGN == result )
{
m_Mode = DEV_MODE.BL_ENTER_UPDATE;
break;
}
//Check AP mode
if ( Result.OK == GetVersion(DEV_MODE.AP) )
{
m_Mode = DEV_MODE.AP;
break;
}
m_Mode = DEV_MODE.NO;
}while(false);
return m_Mode;
}
//private Result GetVersion( DEV_MODE r_mode )
private Result GetVersion()
{
MacBootLoaderVersion Version = new MacBootLoaderVersion();
Result result = Result.FAILURE;
m_Mode = DEV_MODE.NO;
FirmwareVersion ver = new FirmwareVersion();
result = m_clsInterface.API_MacGetFirmwareVersion(ref ver);
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, String.Format("[FW] {0}.{1}.{2}",ver.major,ver.minor,ver.release) );
//ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, String.Format("[FW] {0}.{1}.{2}",ver.major,ver.minor,ver.release) );
//Show device type
ControlItem( ENUM_ITEM_TYPE.TEXT_DEVICE, rfid.clsPacket.TRANS_API_AskDevType().ToString() );
return Result.OK;
}
private void Disconnect( )
{
#if _TRACE_OUT_PUT
m_clsInterface.PrintMagToTxt("====== UpdateFW Disconnect======");
#endif
//clear
ControlItem(ENUM_ITEM_TYPE.TEXT_VER, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_STATUS, "Disconnected");
ControlItem(ENUM_ITEM_TYPE.TEXT_DEVICE, "No device");
m_Mode = DEV_MODE.NO;
//close the device
m_clsInterface.API_RadioClose();
//Disable Item
ControlItem(ENUM_ITEM_TYPE.MENU_DEVICE_INTERFACE, false);
}