/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
else if (rdbPASS.Checked)
{
result = "PASS";
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlFAIReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlFAIReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台資訊
//取得相同BatchID的檢驗資料
var QCDataList = QCInspectionInfoEx.GetDataListByBatchID(_SelectedQCData.BatchID);
//相同BatchID都已完成檢驗旗標
bool isAllFinish = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished"))
{
isAllFinish = false;
}
});
//取得lot資料
var lot = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
//更新機台屬性[FAICOUNT]
CustomizeFunction.UpdateFAI(_SelectedQCData.EquipmentName, lot.Lot, (rdbNG.Checked) ? true : false, txnStamp);
//如果相同的BatchID都檢驗完成或選擇結果為NG時，則更新狀態為IDLE及更新FAICOUNT
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlPQCReasonCode.Must(lblPQCReasonCode);
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlPQCReasonCode.Must(lblPQCReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlPQCReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlPQCReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台狀態及更新檢驗單對應的批號資料
//如果選擇結果為NG時，則更新機台狀態及更新檢驗單對應的批號資料
if (rdbNG.Checked)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("DOWN");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//如果機台狀態為IDLE，則變更狀態為DOWN
if (equipData.CurrentState == "IDLE")
{
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
else
{
//如果機台狀態不為IDLE，則註記機台[USERDEFINECOL01]為Y
EMSTransaction.ModifyEquipmentSystemAttribute(equipData, "USERDEFINECOL01", "Y", txnStamp);
}
//上一次的檢驗單號資料
QCInspectionInfoEx previousInspectionData = null;
//依據機台及料號查詢，然後用建立時間逆排序，找出所有FAI及PQC的檢驗單號資料
var QCDataList = QCInspectionInfoEx.GetInspDataListByEquipmentAndDevice(QCInsepctionData.EquipmentName, QCInsepctionData.DeviceName);
//如果筆數大於1，則目前檢驗單號的索引值
if (QCDataList.Count > 1)
{
//找出目前檢驗單號的索引值
var NGIndex = QCDataList.FindIndex(p => p.InspectionNo == QCInsepctionData.InspectionNo);
//如果找到的索引值不是最後一筆的話，則找出上一次的檢驗單號資料
if (NGIndex != (QCDataList.Count - 1))
{
//找出上一次的檢驗單號資料
previousInspectionData = QCDataList[NGIndex + 1];
}
}
//取得目前檢驗單號的批號子單元資料
var componentList = ComponentInfoEx.GetDataByInspectionNo(QCInsepctionData.InspectionNo);
componentList.ForEach(component =>
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
});
if (previousInspectionData != null)
{
//取得上一次檢驗單號的批號子單元資料
var previousComponentList = ComponentInfoEx.GetDataByInspectionNo(previousInspectionData.InspectionNo);
//取得不需要註記的ComponentID
var passInspectionDataList = QCInspectionObjectInfo.GetInspectionObjects(previousInspectionData);
previousComponentList.ForEach(component =>
{
//確認是否為不需要註記的ComponentID
if (passInspectionDataList.FindIndex(p => p.ItemName1 == component.ComponentID) == -1)
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
}
});
}
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}