public CURLcode SetOption(CurlOption option, object value)
{
//char *argptr;
CURLcode result = CURLcode.CURLE_OK;
#if !CURL_DISABLE_HTTP
long bigsize;
#endif
switch (option)
{
case CurlOption.CURLOPT_RETURNTRANSFER://this option isn't in libcurl, but PHP supports it
returntransfer = (bool)value;
break;
case CurlOption.CURLOPT_CUSTOMREQUEST:
/*
* Set a custom string to use as request
*/
str[(int)DupString.CUSTOMREQUEST] = value;
/* we don't set
data->set.httpreq = HTTPREQ_CUSTOM;
here, we continue as if we were using the already set type
and this just changes the actual request keyword */
break;
case CurlOption.CURLOPT_UPLOAD:
case CurlOption.CURLOPT_PUT:
/*
* We want to sent data to the remote host. If this is HTTP, that equals
* using the PUT request.
*/
upload = (bool)value;
if (upload)
{
/* If this is HTTP, PUT is what's needed to "upload" */
httpreq = Curl_HttpReq.PUT;
opt_no_body = false; /* this is implied */
}
else
/* In HTTP, the opposite of upload is GET (unless NOBODY is true as
then this can be changed to HEAD later on) */
httpreq = Curl_HttpReq.GET;
break;
case CurlOption.CURLOPT_FOLLOWLOCATION:
/*
* Follow Location: header hints on a HTTP-server.
*/
http_follow_location = (bool)value;
break;
case CurlOption.CURLOPT_MAXREDIRS:
/*
* The maximum amount of hops you allow curl to follow Location:
* headers. This should mostly be used to detect never-ending loops.
*/
maxredirs = (int)value;
if (maxredirs > 1) // This is from php extension, not from native curl
http_follow_location = true;
break;
case CurlOption.CURLOPT_POST:
/* Does this option serve a purpose anymore? Yes it does, when
CURLOPT_POSTFIELDS isn't used and the POST data is read off the
callback! */
if ((bool)value)
{
if (httpreq != Curl_HttpReq.POST_FORM)
httpreq = Curl_HttpReq.POST;
opt_no_body = false; /* this is implied */
}
else
httpreq = Curl_HttpReq.GET;
break;
case CurlOption.CURLOPT_POSTFIELDS:
/*
* Like above, but use static data instead of copying it.
*/
postfields = value;
/* Release old copied data. */
str[(int)DupString.COPYPOSTFIELDS] = null;
httpreq = Curl_HttpReq.POST;
break;
case CurlOption.CURLOPT_POSTFIELDSIZE:
/*
* The size of the POSTFIELD data to prevent libcurl to do strlen() to
* figure it out. Enables binary posts.
*/
bigsize = (long)value;
if (postfieldsize < bigsize &&
postfields == str[(int)DupString.COPYPOSTFIELDS])
{
/* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
str[(int)DupString.COPYPOSTFIELDS] = null;
postfields = null;
}
postfieldsize = bigsize;
break;
case CurlOption.CURLOPT_REFERER:
/*
* String to set in the HTTP Referer: field.
*/
//(MB) what is data.change structure? why it exists?
//if(data.change.referer_alloc) {
// free(data.change.referer);
// data.change.referer_alloc = FALSE;
//}
str[(int)DupString.SET_REFERER] = value;
//data->change.referer = data->set.str[STRING_SET_REFERER];
break;
case CurlOption.CURLOPT_USERAGENT:
/*
* String to use in the HTTP User-Agent field
*/
str[(int)DupString.USERAGENT] = value;
break;
case CurlOption.CURLOPT_HEADER:
/*
* Set to include the header in the general data output stream.
*/
include_header = (bool)value;
break;
case CurlOption.CURLOPT_HEADERFUNCTION:
/*
* Set header write callback
*/
fwrite_header = (PhpCallback)value;
break;
case CurlOption.CURLOPT_WRITEFUNCTION:
/*
* Set data write callback
*/
fwrite_func = (PhpCallback)value;
break;
case CurlOption.CURLOPT_HTTPHEADER:
/*
* Set a list with HTTP headers to use (or replace internals with)
*/
headers = (PhpArray)value;
break;
case CurlOption.CURLOPT_HTTPGET:
/*
* Set to force us do HTTP GET
*/
if ((bool)value)
{
httpreq = Curl_HttpReq.GET;
upload = false; /* switch off upload */
opt_no_body = false; /* this is implied */
}
break;
case CurlOption.CURLOPT_HTTP_VERSION:
/*
* This sets a requested HTTP version to be used. The value is one of
* the listed enums in curl/curl.h.
*/
httpversion = (CurlHttpVersion)value;
break;
case CurlOption.CURLOPT_INFILE:
/*
* FILE pointer to read the file to be uploaded from. Or possibly
* used as argument to the read callback.
*/
infile = (PhpResource)value;
break;
case CurlOption.CURLOPT_INFILESIZE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
infilesize = (long)value;
break;
case CurlOption.CURLOPT_INFILESIZE_LARGE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
infilesize = (long)value;
break;
case CurlOption.CURLOPT_URL:
/*
* The URL to fetch.
*/
//if(data->change.url_alloc) {
// /* the already set URL is allocated, free it first! */
// free(data->change.url);
// data->change.url_alloc=FALSE;
//}
str[(int)DupString.SET_URL] = value;
//data->change.url = data->set.str[STRING_SET_URL];
break;
case CurlOption.CURLOPT_PORT:
/*
* The port number to use when getting the URL
*/
useport = (int)value;
break;
case CurlOption.CURLOPT_TIMEOUT:
/*
* The maximum time you allow curl to use for a single transfer
* operation.
*/
timeout = (int)value * 1000;
break;
case CurlOption.CURLOPT_CONNECTTIMEOUT:
/*
* The maximum time you allow curl to use to connect.
*/
connecttimeout = (int)value * 1000;
break;
case CurlOption.CURLOPT_FILE:
/*
* FILE pointer to write to or include in the data write callback
*/
outfile = (PhpResource)value;
break;
#if !CURL_DISABLE_PROXY
case CurlOption.CURLOPT_PROXYPORT:
/*
* Explicitly set HTTP proxy port number.
*/
proxyport = (int)value;
break;
case CurlOption.CURLOPT_PROXYAUTH:
/*
* Set HTTP Authentication type BITMASK.
*/
{
CURLhttpAuth auth = (CURLhttpAuth)value;
//(MB) PHP doesn't have this option although it is in curl
//* the DIGEST_IE bit is only used to set a special marker, for all the
// rest we need to handle it as normal DIGEST */
//data->state.authproxy.iestyle = (bool)((auth & CURLAUTH_DIGEST_IE)?
// TRUE:FALSE);
//if(auth & CURLhttpAuth.CURLAUTH_DIGEST_IE) {
// auth |= CURLhttpAuth.CURLAUTH_DIGEST; /* set standard digest bit */
// auth &= ~CURLhttpAuth.CURLAUTH_DIGEST_IE; /* unset ie digest bit */
//}
/* switch off bits we can't support */
#if !USE_NTLM
auth &= ~CURLhttpAuth.CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#if !USE_HTTP_NEGOTIATE
auth &= ~CURLhttpAuth.CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI or WINDOWS_SSPI */
#endif
//if(auth != 0)
// return CURLE_NOT_BUILT_IN; /* no supported types left! */
proxyauth = auth;
}
break;
case CurlOption.CURLOPT_PROXY:
/*
* Set proxy server:port to use as HTTP proxy.
*
* If the proxy is set to "" we explicitly say that we don't want to use a
* proxy (even though there might be environment variables saying so).
*
* Setting it to NULL, means no proxy but allows the environment variables
* to decide for us.
*/
str[(int)DupString.PROXY] = value;
break;
case CurlOption.CURLOPT_PROXYTYPE:
/*
* Set proxy type. HTTP/HTTP_1_0/SOCKS4/SOCKS4a/SOCKS5/SOCKS5_HOSTNAME
*/
if ((CURLproxyType)proxytype != CURLproxyType.CURLPROXY_HTTP)
PhpException.ArgumentValueNotSupported("value", ((CURLproxyType)proxytype).ToString());
proxytype = (CURLproxyType)value;
break;
case CurlOption.CURLOPT_PROXYUSERPWD:
/*
* user:password needed to use the proxy
*/
setstropt_userpwd(value,
ref str[(int)DupString.PROXYUSERNAME],
ref str[(int)DupString.PROXYPASSWORD]);
break;
case CurlOption.CURLOPT_PROXYUSERNAME:
/*
* authentication user name to use in the operation
*/
str[(int)DupString.PROXYUSERNAME] = value;
break;
case CurlOption.CURLOPT_PROXYPASSWORD:
/*
* authentication password to use in the operation
*/
str[(int)DupString.PROXYPASSWORD] = value;
break;
#endif
case CurlOption.CURLOPT_SSL_VERIFYPEER:
/*
* Enable peer SSL verifying.
*/
if (((bool)value) == false)
PhpException.ArgumentValueNotSupported("value", false);
ssl.VerifyPeer = (bool)value;
break;
case CurlOption.CURLOPT_SSL_VERIFYHOST:
/*
* Enable verification of the CN contained in the peer certificate
*/
if (((int)value) != 2)
PhpException.ArgumentValueNotSupported("value", (int)value);
ssl.VerifyHost = (int)value;
break;
case CurlOption.CURLOPT_SSLCERT:
/*
* String that holds file name of the SSL certificate to use
*/
str[(int)DupString.CERT] = value;
break;
case CurlOption.CURLOPT_SSLCERTPASSWD:
/*
* String that holds the SSL or SSH private key password.
*/
str[(int)DupString.KEY_PASSWD] = value;
break;
case CurlOption.CURLOPT_NOBODY:
/*
* Do not include the body part in the output data stream.
*/
opt_no_body = (bool)value;
break;
case CurlOption.CURLOPT_HTTPAUTH:
/*
* Set HTTP Authentication type BITMASK.
*/
{
CURLhttpAuth auth = (CURLhttpAuth)value;
// PHP doesn't have this option although it's in curl
//* the DIGEST_IE bit is only used to set a special marker, for all the
// rest we need to handle it as normal DIGEST */
//data->state.authhost.iestyle = (bool)((auth & CURLAUTH_DIGEST_IE)?
// TRUE:FALSE);
//if(auth & CURLAUTH_DIGEST_IE) {
// auth |= CURLAUTH_DIGEST; /* set standard digest bit */
// auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */
//}
/* switch off bits we can't support */
#if !USE_NTLM
auth &= ~CURLhttpAuth.CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#if !USE_HTTP_NEGOTIATE
auth &= ~CURLhttpAuth.CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI or WINDOWS_SSPI */
#endif
//if(auth != null)
// return CURLE_NOT_BUILT_IN; /* no supported types left! */
httpauth = auth;
}
break;
case CurlOption.CURLOPT_USERPWD:
/*
* user:password to use in the operation
*/
setstropt_userpwd(value,
ref str[(int)DupString.USERNAME],
ref str[(int)DupString.PASSWORD]);
break;
case CurlOption.CURLOPT_USERNAME:
/*
* authentication user name to use in the operation
*/
str[(int)DupString.USERNAME] = value;
break;
case CurlOption.CURLOPT_PASSWORD:
/*
* authentication password to use in the operation
*/
str[(int)DupString.PASSWORD] = value;
break;
#if !(CURL_DISABLE_COOKIES)
//case CURLOPT_COOKIE:
// /*
// * Cookie string to send to the remote server in the request.
// */
// result = setstropt(&data->set.str[STRING_COOKIE],
// va_arg(param, char *));
// break;
case CurlOption.CURLOPT_COOKIEFILE:
/*
* Set cookie file to read and parse. Can be used multiple times.
*/
/* append the cookie file name to the list of file names, and deal with
them later */
cookielist.Add((string) value );
break;
case CurlOption.CURLOPT_COOKIEJAR:
/*
* Set cookie file name to dump all cookies to when we're done.
*/
str[(int)DupString.COOKIEJAR] = value;
//*
// * Activate the cookie parser. This may or may not already
// * have been made.
// */
//data->cookies = Curl_cookie_init(data, NULL, data->cookies,
// data->set.cookiesession);
break;
#endif
case CurlOption.CURLOPT_HTTPPOST:
/*
* Set to make us do HTTP POST
*/
curl_httppost = value as CurlForm;
httpreq = Curl_HttpReq.POST_FORM;
opt_no_body = false; /* this is implied */
break;
#region UNSUPPORTED OPTIONS
//case CurlOption.CURLOPT_CAINFO:
// /*
// * Set CA info for SSL connection. Specify file name of the CA certificate
// */
// //NOTE: Managed CURL uses CA in windows storage of certificates. It's not recommended to use this option
// //PhpException.Throw(PhpError.Notice,
// // "For performance reasons, you shouldn't add a client certificate with CAINFO option, just add it to your certificates storage."
// str[(int)DupString.SSL_CAFILE] = value;
// break;
//case CURLOPT_DNS_CACHE_TIMEOUT:
// data->set.dns_cache_timeout = va_arg(param, long);
// break;
//case CURLOPT_DNS_USE_GLOBAL_CACHE:
//{
// /* remember we want this enabled */
// long use_cache = va_arg(param, long);
// data->set.global_dns_cache = (bool)(0 != use_cache);
//}
//break;
//case CURLOPT_SSL_CIPHER_LIST:
// /* set a list of cipher we want to use in the SSL connection */
// result = setstropt(&data->set.str[STRING_SSL_CIPHER_LIST],
// va_arg(param, char *));
// break;
//case CURLOPT_RANDOM_FILE:
// /*
// * This is the path name to a file that contains random data to seed
// * the random SSL stuff with. The file is only used for reading.
// */
// result = setstropt(&data->set.str[STRING_SSL_RANDOM_FILE],
// va_arg(param, char *));
// break;
//case CURLOPT_EGDSOCKET:
// /*
// * The Entropy Gathering Daemon socket pathname
// */
// result = setstropt(&data->set.str[STRING_SSL_EGDSOCKET],
// va_arg(param, char *));
// break;
//case CURLOPT_MAXCONNECTS:
// /*
// * Set the absolute number of maximum simultaneous alive connection that
// * libcurl is allowed to have.
// */
// result = Curl_ch_connc(data, data->state.connc, va_arg(param, long));
// break;
//case CURLOPT_FORBID_REUSE:
// /*
// * When this transfer is done, it must not be left to be reused by a
// * subsequent transfer but shall be closed immediately.
// */
// data->set.reuse_forbid = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_FRESH_CONNECT:
// /*
// * This transfer shall not use a previously cached connection but
// * should be made with a fresh new connect!
// */
// data->set.reuse_fresh = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_VERBOSE:
// /*
// * Verbose means infof() calls that give a lot of information about
// * the connection and transfer procedures as well as internal choices.
// */
// data->set.verbose = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_NOPROGRESS:
// /*
// * Shut off the internal supported progress meter
// */
// data->set.hide_progress = (bool)(0 != va_arg(param, long));
// if(data->set.hide_progress)
// data->progress.flags |= PGRS_HIDE;
// else
// data->progress.flags &= ~PGRS_HIDE;
// break;
//case CURLOPT_FAILONERROR:
// /*
// * Don't output the >=300 error code HTML-page, but instead only
// * return error.
// */
// data->set.http_fail_on_error = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_FILETIME:
// /*
// * Try to get the file time of the remote document. The time will
// * later (possibly) become available using curl_easy_getinfo().
// */
// data->set.get_filetime = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_FTP_CREATE_MISSING_DIRS:
// /*
// * An FTP option that modifies an upload to create missing directories on
// * the server.
// */
// switch(va_arg(param, long)) {
// case 0:
// data->set.ftp_create_missing_dirs = 0;
// break;
// case 1:
// data->set.ftp_create_missing_dirs = 1;
// break;
// case 2:
// data->set.ftp_create_missing_dirs = 2;
// break;
// default:
// /* reserve other values for future use */
// result = CURLE_UNKNOWN_OPTION;
// break;
// }
// break;
// case CURLOPT_SERVER_RESPONSE_TIMEOUT:
// /*
// * Option that specifies how quickly an server response must be obtained
// * before it is considered failure. For pingpong protocols.
// */
// data->set.server_response_timeout = va_arg( param , long ) * 1000;
// break;
// case CURLOPT_TFTP_BLKSIZE:
// /*
// * TFTP option that specifies the block size to use for data transmission
// */
// data->set.tftp_blksize = va_arg(param, long);
// break;
// case CURLOPT_DIRLISTONLY:
// /*
// * An option that changes the command to one that asks for a list
// * only, no file info details.
// */
// data->set.ftp_list_only = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_APPEND:
// /*
// * We want to upload and append to an existing file.
// */
// data->set.ftp_append = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_FTP_FILEMETHOD:
// /*
// * How do access files over FTP.
// */
// data->set.ftp_filemethod = (curl_ftpfile)va_arg(param, long);
// break;
// case CURLOPT_NETRC:
// /*
// * Parse the $HOME/.netrc file
// */
// data->set.use_netrc = (enum CURL_NETRC_OPTION)va_arg(param, long);
// break;
// case CURLOPT_NETRC_FILE:
// /*
// * Use this file instead of the $HOME/.netrc file
// */
// result = setstropt(&data->set.str[STRING_NETRC_FILE],
// va_arg(param, char *));
// break;
// case CURLOPT_TRANSFERTEXT:
// /*
// * This option was previously named 'FTPASCII'. Renamed to work with
// * more protocols than merely FTP.
// *
// * Transfer using ASCII (instead of BINARY).
// */
// data->set.prefer_ascii = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_TIMECONDITION:
// /*
// * Set HTTP time condition. This must be one of the defines in the
// * curl/curl.h header file.
// */
// data->set.timecondition = (curl_TimeCond)va_arg(param, long);
// break;
// case CURLOPT_TIMEVALUE:
// /*
// * This is the value to compare with the remote document with the
// * method set with CURLOPT_TIMECONDITION
// */
// data->set.timevalue = (time_t)va_arg(param, long);
// break;
// case CURLOPT_SSLVERSION:
// /*
// * Set explicit SSL version to try to connect with, as some SSL
// * implementations are lame.
// */
// data->set.ssl.version = va_arg(param, long);
// break;
//#ifndef CURL_DISABLE_HTTP
// case CURLOPT_AUTOREFERER:
// /*
// * Switch on automatic referer that gets set if curl follows locations.
// */
// data->set.http_auto_referer = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_ENCODING:
// /*
// * String to use at the value of Accept-Encoding header.
// *
// * If the encoding is set to "" we use an Accept-Encoding header that
// * encompasses all the encodings we support.
// * If the encoding is set to NULL we don't send an Accept-Encoding header
// * and ignore an received Content-Encoding header.
// *
// */
// argptr = va_arg(param, char *);
// result = setstropt(&data->set.str[STRING_ENCODING],
// (argptr && !*argptr)?
// (char *) ALL_CONTENT_ENCODINGS: argptr);
// break;
//case CURLOPT_UNRESTRICTED_AUTH:
// /*
// * Send authentication (user+password) when following locations, even when
// * hostname changed.
// */
// data->set.http_disable_hostname_check_before_authentication =
// (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_POSTREDIR:
//{
// /*
// * Set the behaviour of POST when redirecting
// * CURL_REDIR_GET_ALL - POST is changed to GET after 301 and 302
// * CURL_REDIR_POST_301 - POST is kept as POST after 301
// * CURL_REDIR_POST_302 - POST is kept as POST after 302
// * CURL_REDIR_POST_ALL - POST is kept as POST after 301 and 302
// * other - POST is kept as POST after 301 and 302
// */
// long postRedir = va_arg(param, long);
// data->set.post301 = (bool)((postRedir & CURL_REDIR_POST_301)?TRUE:FALSE);
// data->set.post302 = (bool)((postRedir & CURL_REDIR_POST_302)?TRUE:FALSE);
//}
//break;
//case CURLOPT_COPYPOSTFIELDS:
// /*
// * A string with POST data. Makes curl HTTP POST. Even if it is NULL.
// * If needed, CURLOPT_POSTFIELDSIZE must have been set prior to
// * CURLOPT_COPYPOSTFIELDS and not altered later.
// */
// argptr = va_arg(param, char *);
// if(!argptr || data->set.postfieldsize == -1)
// result = setstropt(&data->set.str[STRING_COPYPOSTFIELDS], argptr);
// else {
// /*
// * Check that requested length does not overflow the size_t type.
// */
// if((data->set.postfieldsize < 0) ||
// ((sizeof(curl_off_t) != sizeof(size_t)) &&
// (data->set.postfieldsize > (curl_off_t)((size_t)-1))))
// result = CURLE_OUT_OF_MEMORY;
// else {
// char * p;
// (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
// /* Allocate even when size == 0. This satisfies the need of possible
// later address compare to detect the COPYPOSTFIELDS mode, and
// to mark that postfields is used rather than read function or
// form data.
// */
// p = malloc((size_t)(data->set.postfieldsize?
// data->set.postfieldsize:1));
// if(!p)
// result = CURLE_OUT_OF_MEMORY;
// else {
// if(data->set.postfieldsize)
// memcpy(p, argptr, (size_t)data->set.postfieldsize);
// data->set.str[STRING_COPYPOSTFIELDS] = p;
// }
// }
// }
// data->set.postfields = data->set.str[STRING_COPYPOSTFIELDS];
// data->set.httpreq = HTTPREQ_POST;
// break;
//case CURLOPT_POSTFIELDSIZE_LARGE:
// /*
// * The size of the POSTFIELD data to prevent libcurl to do strlen() to
// * figure it out. Enables binary posts.
// */
// bigsize = va_arg(param, curl_off_t);
// if(data->set.postfieldsize < bigsize &&
// data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) {
// /* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
// (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
// data->set.postfields = NULL;
// }
// data->set.postfieldsize = bigsize;
// break;
//case CURLOPT_HTTP200ALIASES:
// /*
// * Set a list of aliases for HTTP 200 in response header
// */
// data->set.http200aliases = va_arg(param, struct curl_slist *);
// break;
//#if !(CURL_DISABLE_COOKIES)
// case CURLOPT_COOKIE:
// /*
// * Cookie string to send to the remote server in the request.
// */
// result = setstropt(&data->set.str[STRING_COOKIE],
// va_arg(param, char *));
// break;
// case CURLOPT_COOKIESESSION:
// /*
// * Set this option to TRUE to start a new "cookie session". It will
// * prevent the forthcoming read-cookies-from-file actions to accept
// * cookies that are marked as being session cookies, as they belong to a
// * previous session.
// *
// * In the original Netscape cookie spec, "session cookies" are cookies
// * with no expire date set. RFC2109 describes the same action if no
// * 'Max-Age' is set and RFC2965 includes the RFC2109 description and adds
// * a 'Discard' action that can enforce the discard even for cookies that
// * have a Max-Age.
// *
// * We run mostly with the original cookie spec, as hardly anyone implements
// * anything else.
// */
// data->set.cookiesession = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_COOKIELIST:
// argptr = va_arg(param, char *);
// if(argptr == NULL)
// break;
// if(Curl_raw_equal(argptr, "ALL")) {
// /* clear all cookies */
// Curl_cookie_clearall(data->cookies);
// break;
// }
// else if(Curl_raw_equal(argptr, "SESS")) {
// /* clear session cookies */
// Curl_cookie_clearsess(data->cookies);
// break;
// }
// else if(Curl_raw_equal(argptr, "FLUSH")) {
// /* flush cookies to file */
// Curl_flush_cookies(data, 0);
// break;
// }
// if(!data->cookies)
// /* if cookie engine was not running, activate it */
// data->cookies = Curl_cookie_init(data, NULL, NULL, TRUE);
// argptr = strdup(argptr);
// if(!argptr) {
// result = CURLE_OUT_OF_MEMORY;
// break;
// }
// if(checkprefix("Set-Cookie:", argptr))
// /* HTTP Header format line */
// Curl_cookie_add(data, data->cookies, TRUE, argptr + 11, NULL, NULL);
// else
// /* Netscape format line */
// Curl_cookie_add(data, data->cookies, FALSE, argptr, NULL, NULL);
// free(argptr);
// break;
//#endif /* CURL_DISABLE_COOKIES */
//#endif /* CURL_DISABLE_HTTP */
//#if !CURL_DISABLE_PROXY
//case CurlOption.CURLOPT_HTTPPROXYTUNNEL:
// /*
// * Tunnel operations through the proxy instead of normal proxy use
// */
// tunnel_thru_httpproxy = (bool)value;
// break;
// case CURLOPT_PROXY_TRANSFER_MODE:
// /*
// * set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy
// */
// switch (va_arg(param, long)) {
// case 0:
// data->set.proxy_transfer_mode = FALSE;
// break;
// case 1:
// data->set.proxy_transfer_mode = TRUE;
// break;
// default:
// /* reserve other values for future use */
// result = CURLE_UNKNOWN_OPTION;
// break;
// }
// break;
//#endif /* CURL_DISABLE_PROXY */
//#if HAVE_GSSAPI || USE_WINDOWS_SSPI
// case CURLOPT_SOCKS5_GSSAPI_SERVICE:
// /*
// * Set gssapi service name
// */
// result = setstropt(&data->set.str[STRING_SOCKS5_GSSAPI_SERVICE],
// va_arg(param, char *));
// break;
// case CURLOPT_SOCKS5_GSSAPI_NEC:
// /*
// * set flag for nec socks5 support
// */
// data->set.socks5_gssapi_nec = (bool)(0 != va_arg(param, long));
// break;
//#endif
//case CURLOPT_WRITEHEADER:
// /*
// * Custom pointer to pass the header write callback function
// */
// data->set.writeheader = (void *)va_arg(param, void *);
// break;
//case CURLOPT_ERRORBUFFER:
// /*
// * Error buffer provided by the caller to get the human readable
// * error string in.
// */
// data->set.errorbuffer = va_arg(param, char *);
// break;
//case CURLOPT_FTPPORT:
// /*
// * Use FTP PORT, this also specifies which IP address to use
// */
// result = setstropt(&data->set.str[STRING_FTPPORT],
// va_arg(param, char *));
// data->set.ftp_use_port = (bool)(NULL != data->set.str[STRING_FTPPORT]);
// break;
//case CURLOPT_FTP_USE_EPRT:
// data->set.ftp_use_eprt = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_FTP_USE_EPSV:
// data->set.ftp_use_epsv = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_FTP_USE_PRET:
// data->set.ftp_use_pret = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_FTP_SSL_CCC:
// data->set.ftp_ccc = (curl_ftpccc)va_arg(param, long);
// break;
//case CURLOPT_FTP_SKIP_PASV_IP:
// /*
// * Enable or disable FTP_SKIP_PASV_IP, which will disable/enable the
// * bypass of the IP address in PASV responses.
// */
// data->set.ftp_skip_ip = (bool)(0 != va_arg(param, long));
// break;
//case CURLOPT_LOW_SPEED_LIMIT:
// /*
// * The low speed limit that if transfers are below this for
// * CURLOPT_LOW_SPEED_TIME, the transfer is aborted.
// */
// data->set.low_speed_limit=va_arg(param, long);
// break;
//case CURLOPT_MAX_SEND_SPEED_LARGE:
// /*
// * When transfer uploads are faster then CURLOPT_MAX_SEND_SPEED_LARGE
// * bytes per second the transfer is throttled..
// */
// data->set.max_send_speed=va_arg(param, curl_off_t);
// break;
//case CURLOPT_MAX_RECV_SPEED_LARGE:
// /*
// * When receiving data faster than CURLOPT_MAX_RECV_SPEED_LARGE bytes per
// * second the transfer is throttled..
// */
// data->set.max_recv_speed=va_arg(param, curl_off_t);
// break;
//case CURLOPT_LOW_SPEED_TIME:
// /*
// * The low speed time that if transfers are below the set
// * CURLOPT_LOW_SPEED_LIMIT during this time, the transfer is aborted.
// */
// data->set.low_speed_time=va_arg(param, long);
// break;
//case CurlOption.CURLOPT_TIMEOUT_MS:
// data.set.timeout = (long)value;
// break;
//case CURLOPT_CONNECTTIMEOUT_MS:
// data->set.connecttimeout = va_arg(param, long);
// break;
// case CURLOPT_POSTQUOTE:
// /*
// * List of RAW FTP commands to use after a transfer
// */
// data->set.postquote = va_arg(param, struct curl_slist *);
// break;
// case CURLOPT_PREQUOTE:
// /*
// * List of RAW FTP commands to use prior to RETR (Wesley Laxton)
// */
// data->set.prequote = va_arg(param, struct curl_slist *);
// break;
// case CURLOPT_QUOTE:
// /*
// * List of RAW FTP commands to use before a transfer
// */
// data->set.quote = va_arg(param, struct curl_slist *);
// break;
// case CURLOPT_RESOLVE:
// /*
// * List of NAME:[address] names to populate the DNS cache with
// * Prefix the NAME with dash (-) to _remove_ the name from the cache.
// *
// * Names added with this API will remain in the cache until explicitly
// * removed or the handle is cleaned up.
// *
// * This API can remove any name from the DNS cache, but only entries
// * that aren't actually in use right now will be pruned immediately.
// */
// data->set.resolve = va_arg(param, struct curl_slist *);
// data->change.resolve = data->set.resolve;
// break;
// case CURLOPT_PROGRESSFUNCTION:
// /*
// * Progress callback function
// */
// data->set.fprogress = va_arg(param, curl_progress_callback);
// if(data->set.fprogress)
// data->progress.callback = TRUE; /* no longer internal */
// else
// data->progress.callback = FALSE; /* NULL enforces internal */
// break;
// case CURLOPT_PROGRESSDATA:
// /*
// * Custom client data to pass to the progress callback
// */
// data->set.progress_client = va_arg(param, void *);
// break;
//#ifndef CURL_DISABLE_PROXY
// case CURLOPT_NOPROXY:
// /*
// * proxy exception list
// */
// result = setstropt(&data->set.str[STRING_NOPROXY],
// va_arg(param, char *));
// break;
//#endif
// case CURLOPT_RANGE:
// /*
// * What range of the file you want to transfer
// */
// result = setstropt(&data->set.str[STRING_SET_RANGE],
// va_arg(param, char *));
// break;
// case CURLOPT_RESUME_FROM:
// /*
// * Resume transfer at the give file position
// */
// data->set.set_resume_from = va_arg(param, long);
// break;
// case CURLOPT_RESUME_FROM_LARGE:
// /*
// * Resume transfer at the give file position
// */
// data->set.set_resume_from = va_arg(param, curl_off_t);
// break;
// case CURLOPT_DEBUGFUNCTION:
// /*
// * stderr write callback.
// */
// data->set.fdebug = va_arg(param, curl_debug_callback);
// /*
// * if the callback provided is NULL, it'll use the default callback
// */
// break;
// case CURLOPT_DEBUGDATA:
// /*
// * Set to a void * that should receive all error writes. This
// * defaults to CURLOPT_STDERR for normal operations.
// */
// data->set.debugdata = va_arg(param, void *);
// break;
// case CURLOPT_STDERR:
// /*
// * Set to a FILE * that should receive all error writes. This
// * defaults to stderr for normal operations.
// */
// data->set.err = va_arg(param, FILE *);
// if(!data->set.err)
// data->set.err = stderr;
// break;
// case CURLOPT_WRITEFUNCTION:
// /*
// * Set data write callback
// */
// data->set.fwrite_func = va_arg(param, curl_write_callback);
// if(!data->set.fwrite_func) {
// data->set.is_fwrite_set = 0;
// /* When set to NULL, reset to our internal default function */
// data->set.fwrite_func = (curl_write_callback)fwrite;
// }
// else
// data->set.is_fwrite_set = 1;
// break;
// case CURLOPT_READFUNCTION:
// /*
// * Read data callback
// */
// data->set.fread_func = va_arg(param, curl_read_callback);
// if(!data->set.fread_func) {
// data->set.is_fread_set = 0;
// /* When set to NULL, reset to our internal default function */
// data->set.fread_func = (curl_read_callback)fread;
// }
// else
// data->set.is_fread_set = 1;
// break;
// case CURLOPT_SEEKFUNCTION:
// /*
// * Seek callback. Might be NULL.
// */
// data->set.seek_func = va_arg(param, curl_seek_callback);
// break;
// case CURLOPT_SEEKDATA:
// /*
// * Seek control callback. Might be NULL.
// */
// data->set.seek_client = va_arg(param, void *);
// break;
// case CURLOPT_CONV_FROM_NETWORK_FUNCTION:
// /*
// * "Convert from network encoding" callback
// */
// data->set.convfromnetwork = va_arg(param, curl_conv_callback);
// break;
// case CURLOPT_CONV_TO_NETWORK_FUNCTION:
// /*
// * "Convert to network encoding" callback
// */
// data->set.convtonetwork = va_arg(param, curl_conv_callback);
// break;
// case CURLOPT_CONV_FROM_UTF8_FUNCTION:
// /*
// * "Convert from UTF-8 encoding" callback
// */
// data->set.convfromutf8 = va_arg(param, curl_conv_callback);
// break;
// case CURLOPT_IOCTLFUNCTION:
// /*
// * I/O control callback. Might be NULL.
// */
// data->set.ioctl_func = va_arg(param, curl_ioctl_callback);
// break;
// case CURLOPT_IOCTLDATA:
// /*
// * I/O control data pointer. Might be NULL.
// */
// data->set.ioctl_client = va_arg(param, void *);
// break;
// case CURLOPT_SSLCERTTYPE:
// /*
// * String that holds file type of the SSL certificate to use
// */
// result = setstropt(&data->set.str[STRING_CERT_TYPE],
// va_arg(param, char *));
// break;
// case CURLOPT_SSLKEY:
// /*
// * String that holds file name of the SSL key to use
// */
// result = setstropt(&data->set.str[STRING_KEY],
// va_arg(param, char *));
// break;
// case CURLOPT_SSLKEYTYPE:
// /*
// * String that holds file type of the SSL key to use
// */
// result = setstropt(&data->set.str[STRING_KEY_TYPE],
// va_arg(param, char *));
// break;
// case CURLOPT_SSLENGINE:
// /*
// * String that holds the SSL crypto engine.
// */
// argptr = va_arg(param, char *);
// if(argptr && argptr[0])
// result = Curl_ssl_set_engine(data, argptr);
// break;
// case CURLOPT_SSLENGINE_DEFAULT:
// /*
// * flag to set engine as default.
// */
// result = Curl_ssl_set_engine_default(data);
// break;
// case CURLOPT_CRLF:
// /*
// * Kludgy option to enable CRLF conversions. Subject for removal.
// */
// data->set.crlf = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_INTERFACE:
// /*
// * Set what interface or address/hostname to bind the socket to when
// * performing an operation and thus what from-IP your connection will use.
// */
// result = setstropt(&data->set.str[STRING_DEVICE],
// va_arg(param, char *));
// break;
// case CURLOPT_LOCALPORT:
// /*
// * Set what local port to bind the socket to when performing an operation.
// */
// data->set.localport = curlx_sltous(va_arg(param, long));
// break;
// case CURLOPT_LOCALPORTRANGE:
// /*
// * Set number of local ports to try, starting with CURLOPT_LOCALPORT.
// */
// data->set.localportrange = curlx_sltosi(va_arg(param, long));
// break;
// case CURLOPT_KRBLEVEL:
// /*
// * A string that defines the kerberos security level.
// */
// result = setstropt(&data->set.str[STRING_KRB_LEVEL],
// va_arg(param, char *));
// data->set.krb = (bool)(NULL != data->set.str[STRING_KRB_LEVEL]);
// break;
//#ifdef USE_SSLEAY
// /* since these two options are only possible to use on an OpenSSL-
// powered libcurl we #ifdef them on this condition so that libcurls
// built against other SSL libs will return a proper error when trying
// to set this option! */
// case CURLOPT_SSL_CTX_FUNCTION:
// /*
// * Set a SSL_CTX callback
// */
// data->set.ssl.fsslctx = va_arg(param, curl_ssl_ctx_callback);
// break;
// case CURLOPT_SSL_CTX_DATA:
// /*
// * Set a SSL_CTX callback parameter pointer
// */
// data->set.ssl.fsslctxp = va_arg(param, void *);
// break;
// case CURLOPT_CERTINFO:
// data->set.ssl.certinfo = (bool)(0 != va_arg(param, long));
// break;
//#endif
// case CURLOPT_CAPATH:
// /*
// * Set CA path info for SSL connection. Specify directory name of the CA
// * certificates which have been prepared using openssl c_rehash utility.
// */
// /* This does not work on windows. */
// result = setstropt(&data->set.str[STRING_SSL_CAPATH],
// va_arg(param, char *));
// break;
// case CURLOPT_CRLFILE:
// /*
// * Set CRL file info for SSL connection. Specify file name of the CRL
// * to check certificates revocation
// */
// result = setstropt(&data->set.str[STRING_SSL_CRLFILE],
// va_arg(param, char *));
// break;
// case CURLOPT_ISSUERCERT:
// /*
// * Set Issuer certificate file
// * to check certificates issuer
// */
// result = setstropt(&data->set.str[STRING_SSL_ISSUERCERT],
// va_arg(param, char *));
// break;
// case CURLOPT_TELNETOPTIONS:
// /*
// * Set a linked list of telnet options
// */
// data->set.telnet_options = va_arg(param, struct curl_slist *);
// break;
// case CURLOPT_BUFFERSIZE:
// /*
// * The application kindly asks for a differently sized receive buffer.
// * If it seems reasonable, we'll use it.
// */
// data->set.buffer_size = va_arg(param, long);
// if((data->set.buffer_size> (BUFSIZE -1 )) ||
// (data->set.buffer_size < 1))
// data->set.buffer_size = 0; /* huge internal default */
// break;
// case CURLOPT_NOSIGNAL:
// /*
// * The application asks not to set any signal() or alarm() handlers,
// * even when using a timeout.
// */
// data->set.no_signal = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_SHARE:
// {
// struct Curl_share *set;
// set = va_arg(param, struct Curl_share *);
// /* disconnect from old share, if any */
// if(data->share) {
// Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
// if(data->dns.hostcachetype == HCACHE_SHARED) {
// data->dns.hostcache = NULL;
// data->dns.hostcachetype = HCACHE_NONE;
// }
// if(data->share->cookies == data->cookies)
// data->cookies = NULL;
// data->share->dirty--;
// Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
// data->share = NULL;
// }
// /* use new share if it set */
// data->share = set;
// if(data->share) {
// Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
// data->share->dirty++;
// if(data->share->hostcache) {
// /* use shared host cache, first free the private one if any */
// if(data->dns.hostcachetype == HCACHE_PRIVATE)
// Curl_hash_destroy(data->dns.hostcache);
// data->dns.hostcache = data->share->hostcache;
// data->dns.hostcachetype = HCACHE_SHARED;
// }
//#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
// if(data->share->cookies) {
// /* use shared cookie list, first free own one if any */
// if(data->cookies)
// Curl_cookie_cleanup(data->cookies);
// /* enable cookies since we now use a share that uses cookies! */
// data->cookies = data->share->cookies;
// }
//#endif /* CURL_DISABLE_HTTP */
// Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
// }
// /* check for host cache not needed,
// * it will be done by curl_easy_perform */
// }
// break;
// case CURLOPT_PRIVATE:
// /*
// * Set private data pointer.
// */
// data->set.private_data = va_arg(param, void *);
// break;
// case CURLOPT_MAXFILESIZE:
// /*
// * Set the maximum size of a file to download.
// */
// data->set.max_filesize = va_arg(param, long);
// break;
//#ifdef USE_SSL
// case CURLOPT_USE_SSL:
// /*
// * Make transfers attempt to use SSL/TLS.
// */
// data->set.ftp_ssl = (curl_usessl)va_arg(param, long);
// break;
//#endif
// case CURLOPT_FTPSSLAUTH:
// /*
// * Set a specific auth for FTP-SSL transfers.
// */
// data->set.ftpsslauth = (curl_ftpauth)va_arg(param, long);
// break;
// case CURLOPT_IPRESOLVE:
// data->set.ipver = va_arg(param, long);
// break;
// case CURLOPT_MAXFILESIZE_LARGE:
// /*
// * Set the maximum size of a file to download.
// */
// data->set.max_filesize = va_arg(param, curl_off_t);
// break;
// case CURLOPT_TCP_NODELAY:
// /*
// * Enable or disable TCP_NODELAY, which will disable/enable the Nagle
// * algorithm
// */
// data->set.tcp_nodelay = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_FTP_ACCOUNT:
// result = setstropt(&data->set.str[STRING_FTP_ACCOUNT],
// va_arg(param, char *));
// break;
// case CURLOPT_IGNORE_CONTENT_LENGTH:
// data->set.ignorecl = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_CONNECT_ONLY:
// /*
// * No data transfer, set up connection and let application use the socket
// */
// data->set.connect_only = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_FTP_ALTERNATIVE_TO_USER:
// result = setstropt(&data->set.str[STRING_FTP_ALTERNATIVE_TO_USER],
// va_arg(param, char *));
// break;
// case CURLOPT_SOCKOPTFUNCTION:
// /*
// * socket callback function: called after socket() but before connect()
// */
// data->set.fsockopt = va_arg(param, curl_sockopt_callback);
// break;
// case CURLOPT_SOCKOPTDATA:
// /*
// * socket callback data pointer. Might be NULL.
// */
// data->set.sockopt_client = va_arg(param, void *);
// break;
// case CURLOPT_OPENSOCKETFUNCTION:
// /*
// * open/create socket callback function: called instead of socket(),
// * before connect()
// */
// data->set.fopensocket = va_arg(param, curl_opensocket_callback);
// break;
// case CURLOPT_OPENSOCKETDATA:
// /*
// * socket callback data pointer. Might be NULL.
// */
// data->set.opensocket_client = va_arg(param, void *);
// break;
// case CURLOPT_SSL_SESSIONID_CACHE:
// data->set.ssl.sessionid = (bool)(0 != va_arg(param, long));
// break;
//#ifdef USE_LIBSSH2
// /* we only include SSH options if explicitly built to support SSH */
// case CURLOPT_SSH_AUTH_TYPES:
// data->set.ssh_auth_types = va_arg(param, long);
// break;
// case CURLOPT_SSH_PUBLIC_KEYFILE:
// /*
// * Use this file instead of the $HOME/.ssh/id_dsa.pub file
// */
// result = setstropt(&data->set.str[STRING_SSH_PUBLIC_KEY],
// va_arg(param, char *));
// break;
// case CURLOPT_SSH_PRIVATE_KEYFILE:
// /*
// * Use this file instead of the $HOME/.ssh/id_dsa file
// */
// result = setstropt(&data->set.str[STRING_SSH_PRIVATE_KEY],
// va_arg(param, char *));
// break;
// case CURLOPT_SSH_HOST_PUBLIC_KEY_MD5:
// /*
// * Option to allow for the MD5 of the host public key to be checked
// * for validation purposes.
// */
// result = setstropt(&data->set.str[STRING_SSH_HOST_PUBLIC_KEY_MD5],
// va_arg(param, char *));
// break;
//#ifdef HAVE_LIBSSH2_KNOWNHOST_API
// case CURLOPT_SSH_KNOWNHOSTS:
// /*
// * Store the file name to read known hosts from.
// */
// result = setstropt(&data->set.str[STRING_SSH_KNOWNHOSTS],
// va_arg(param, char *));
// break;
// case CURLOPT_SSH_KEYFUNCTION:
// /* setting to NULL is fine since the ssh.c functions themselves will
// then rever to use the internal default */
// data->set.ssh_keyfunc = va_arg(param, curl_sshkeycallback);
// break;
// case CURLOPT_SSH_KEYDATA:
// /*
// * Custom client data to pass to the SSH keyfunc callback
// */
// data->set.ssh_keyfunc_userp = va_arg(param, void *);
// break;
//#endif /* HAVE_LIBSSH2_KNOWNHOST_API */
//#endif /* USE_LIBSSH2 */
// case CURLOPT_HTTP_TRANSFER_DECODING:
// /*
// * disable libcurl transfer encoding is used
// */
// data->set.http_te_skip = (bool)(0 == va_arg(param, long));
// break;
// case CURLOPT_HTTP_CONTENT_DECODING:
// /*
// * raw data passed to the application when content encoding is used
// */
// data->set.http_ce_skip = (bool)(0 == va_arg(param, long));
// break;
// case CURLOPT_NEW_FILE_PERMS:
// /*
// * Uses these permissions instead of 0644
// */
// data->set.new_file_perms = va_arg(param, long);
// break;
// case CURLOPT_NEW_DIRECTORY_PERMS:
// /*
// * Uses these permissions instead of 0755
// */
// data->set.new_directory_perms = va_arg(param, long);
// break;
// case CURLOPT_ADDRESS_SCOPE:
// /*
// * We always get longs when passed plain numericals, but for this value we
// * know that an unsigned int will always hold the value so we blindly
// * typecast to this type
// */
// data->set.scope = curlx_sltoui(va_arg(param, long));
// break;
// case CURLOPT_PROTOCOLS:
// /* set the bitmask for the protocols that are allowed to be used for the
// transfer, which thus helps the app which takes URLs from users or other
// external inputs and want to restrict what protocol(s) to deal
// with. Defaults to CURLPROTO_ALL. */
// data->set.allowed_protocols = va_arg(param, long);
// break;
// case CURLOPT_REDIR_PROTOCOLS:
// /* set the bitmask for the protocols that libcurl is allowed to follow to,
// as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
// to be set in both bitmasks to be allowed to get redirected to. Defaults
// to all protocols except FILE and SCP. */
// data->set.redir_protocols = va_arg(param, long);
// break;
// case CURLOPT_MAIL_FROM:
// result = setstropt(&data->set.str[STRING_MAIL_FROM],
// va_arg(param, char *));
// break;
// case CURLOPT_MAIL_RCPT:
// /* get a list of mail recipients */
// data->set.mail_rcpt = va_arg(param, struct curl_slist *);
// break;
// case CURLOPT_RTSP_REQUEST:
// {
// /*
// * Set the RTSP request method (OPTIONS, SETUP, PLAY, etc...)
// * Would this be better if the RTSPREQ_* were just moved into here?
// */
// long curl_rtspreq = va_arg(param, long);
// Curl_RtspReq rtspreq = RTSPREQ_NONE;
// switch(curl_rtspreq) {
// case CURL_RTSPREQ_OPTIONS:
// rtspreq = RTSPREQ_OPTIONS;
// break;
// case CURL_RTSPREQ_DESCRIBE:
// rtspreq = RTSPREQ_DESCRIBE;
// break;
// case CURL_RTSPREQ_ANNOUNCE:
// rtspreq = RTSPREQ_ANNOUNCE;
// break;
// case CURL_RTSPREQ_SETUP:
// rtspreq = RTSPREQ_SETUP;
// break;
// case CURL_RTSPREQ_PLAY:
// rtspreq = RTSPREQ_PLAY;
// break;
// case CURL_RTSPREQ_PAUSE:
// rtspreq = RTSPREQ_PAUSE;
// break;
// case CURL_RTSPREQ_TEARDOWN:
// rtspreq = RTSPREQ_TEARDOWN;
// break;
// case CURL_RTSPREQ_GET_PARAMETER:
// rtspreq = RTSPREQ_GET_PARAMETER;
// break;
// case CURL_RTSPREQ_SET_PARAMETER:
// rtspreq = RTSPREQ_SET_PARAMETER;
// break;
// case CURL_RTSPREQ_RECORD:
// rtspreq = RTSPREQ_RECORD;
// break;
// case CURL_RTSPREQ_RECEIVE:
// rtspreq = RTSPREQ_RECEIVE;
// break;
// default:
// rtspreq = RTSPREQ_NONE;
// }
// data->set.rtspreq = rtspreq;
// break;
// }
// case CURLOPT_RTSP_SESSION_ID:
// /*
// * Set the RTSP Session ID manually. Useful if the application is
// * resuming a previously established RTSP session
// */
// result = setstropt(&data->set.str[STRING_RTSP_SESSION_ID],
// va_arg(param, char *));
// break;
// case CURLOPT_RTSP_STREAM_URI:
// /*
// * Set the Stream URI for the RTSP request. Unless the request is
// * for generic server options, the application will need to set this.
// */
// result = setstropt(&data->set.str[STRING_RTSP_STREAM_URI],
// va_arg(param, char *));
// break;
// case CURLOPT_RTSP_TRANSPORT:
// /*
// * The content of the Transport: header for the RTSP request
// */
// result = setstropt(&data->set.str[STRING_RTSP_TRANSPORT],
// va_arg(param, char *));
// break;
// case CURLOPT_RTSP_CLIENT_CSEQ:
// /*
// * Set the CSEQ number to issue for the next RTSP request. Useful if the
// * application is resuming a previously broken connection. The CSEQ
// * will increment from this new number henceforth.
// */
// data->state.rtsp_next_client_CSeq = va_arg(param, long);
// break;
// case CURLOPT_RTSP_SERVER_CSEQ:
// /* Same as the above, but for server-initiated requests */
// data->state.rtsp_next_client_CSeq = va_arg(param, long);
// break;
// case CURLOPT_INTERLEAVEDATA:
// data->set.rtp_out = va_arg(param, void *);
// break;
// case CURLOPT_INTERLEAVEFUNCTION:
// /* Set the user defined RTP write function */
// data->set.fwrite_rtp = va_arg(param, curl_write_callback);
// break;
// case CURLOPT_WILDCARDMATCH:
// data->set.wildcardmatch = (bool)(0 != va_arg(param, long));
// break;
// case CURLOPT_CHUNK_BGN_FUNCTION:
// data->set.chunk_bgn = va_arg(param, curl_chunk_bgn_callback);
// break;
// case CURLOPT_CHUNK_END_FUNCTION:
// data->set.chunk_end = va_arg(param, curl_chunk_end_callback);
// break;
// case CURLOPT_FNMATCH_FUNCTION:
// data->set.fnmatch = va_arg(param, curl_fnmatch_callback);
// break;
// case CURLOPT_CHUNK_DATA:
// data->wildcard.customptr = va_arg(param, void *);
// break;
// case CURLOPT_FNMATCH_DATA:
// data->set.fnmatch_data = va_arg(param, void *);
// break;
//#ifdef USE_TLS_SRP
// case CURLOPT_TLSAUTH_USERNAME:
// result = setstropt(&data->set.str[STRING_TLSAUTH_USERNAME],
// va_arg(param, char *));
// if (data->set.str[STRING_TLSAUTH_USERNAME] && !data->set.ssl.authtype)
// data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */
// break;
// case CURLOPT_TLSAUTH_PASSWORD:
// result = setstropt(&data->set.str[STRING_TLSAUTH_PASSWORD],
// va_arg(param, char *));
// if (data->set.str[STRING_TLSAUTH_USERNAME] && !data->set.ssl.authtype)
// data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */
// break;
// case CURLOPT_TLSAUTH_TYPE:
// if (strncmp((char *)va_arg(param, char *), "SRP", strlen("SRP")) == 0)
// data->set.ssl.authtype = CURL_TLSAUTH_SRP;
// else
// data->set.ssl.authtype = CURL_TLSAUTH_NONE;
// break;
//#endif
#endregion
default:
/* unknown tag and its companion, just ignore: */
//result = CURLE_UNKNOWN_OPTION;
PhpException.ArgumentValueNotSupported("option", option.ToString());
break;
}
return result;
}
public UserDefined()
{
/*
* Initialize the UserDefined fields within a SessionHandle.
* This may be safely called on a new or existing SessionHandle.
*/
//CurlCode res = CurlCode.CURLE_OK;
//data.out = stdout; /* default output to stdout */
//data.in = stdin; /* default input from stdin */
//data.err = stderr; /* default stderr to stderr */
/* use fwrite as default function to store output */
//data.fwrite_func = (curl_write_callback)fwrite;
/* use fread as default function to read input */
//data.fread_func = (curl_read_callback)fread;
//data.is_fread_set = 0;
//data.is_fwrite_set = 0;
//data.seek_func = ZERO_NULL;
//data.seek_client = ZERO_NULL;
/* conversion callbacks for non-ASCII hosts */
//data.convfromnetwork = ZERO_NULL;
//data.convtonetwork = ZERO_NULL;
//data.convfromutf8 = ZERO_NULL;
infilesize = -1; /* we don't know any size */
postfieldsize = -1; /* unknown size */
http_follow_location = false;
maxredirs = DEFAULT_MAXREDIRS; /* allow any amount by default */
httpreq = Curl_HttpReq.GET; /* Default HTTP request */
httpversion = CurlHttpVersion.CURL_HTTP_VERSION_NONE;
//data.rtspreq = RTSPREQ_OPTIONS; /* Default RTSP request */
//data.ftp_use_epsv = TRUE; /* FTP defaults to EPSV operations */
//data.ftp_use_eprt = TRUE; /* FTP defaults to EPRT operations */
//data.ftp_use_pret = FALSE; /* mainly useful for drftpd servers */
//data.ftp_filemethod = FTPFILE_MULTICWD;
//data.dns_cache_timeout = 60; /* Timeout every 60 seconds by default */
/* Set the default size of the SSL session ID cache */
//data.ssl.numsessions = 5;
proxyport = CURL_DEFAULT_PROXY_PORT; /* from url.h */
proxytype = CURLproxyType.CURLPROXY_HTTP; /* defaults to HTTP proxy */
httpauth = CURLhttpAuth.CURLAUTH_BASIC; /* defaults to basic */
proxyauth = CURLhttpAuth.CURLAUTH_BASIC; /* defaults to basic */
/* make libcurl quiet by default: */
// data.hide_progress = TRUE; /* CURLOPT_NOPROGRESS changes these */
/*
* libcurl 7.10 introduced SSL verification *by default*! This needs to be
* switched off unless wanted.
*/
ssl.VerifyPeer = true;
ssl.VerifyHost = 2;
#if USE_TLS_SRP
ssl.authtype = CURL_TLSAUTH_NONE;
#endif
//ssh_auth_types = CurlSshAuth.DEFAULT; /* defaults to any auth type */
//ssl.sessionid = true; /* session ID caching enabled by default */
//data.new_file_perms = 0644; /* Default permissions */
//data.new_directory_perms = 0755; /* Default permissions */
/* for the *protocols fields we don't use the CURLPROTO_ALL convenience
define since we internally only use the lower 16 bits for the passed
in bitmask to not conflict with the private bits */
//data.allowed_protocols = CURLPROTO_ALL;
//data.redir_protocols =
//CURLPROTO_ALL & ~(CURLPROTO_FILE | CURLPROTO_SCP); /* not FILE or SCP */
#if HAVE_GSSAPI || USE_WINDOWS_SSPI
/*
* disallow unprotected protection negotiation NEC reference implementation
* seem not to follow rfc1961 section 4.3/4.4
*/
data.socks5_gssapi_nec = FALSE;
/* set default gssapi service name */
res = setstropt(&data.str[STRING_SOCKS5_GSSAPI_SERVICE],
(char *) CURL_DEFAULT_SOCKS5_GSSAPI_SERVICE);
if (res != CURLE_OK)
return res;
#endif
/* This is our preferred CA cert bundle/path since install time */
#if CURL_CA_BUNDLE
res = setstropt(&data.str[STRING_SSL_CAFILE], (char *) CURL_CA_BUNDLE);
#elif CURL_CA_PATH
res = setstropt(&data.str[STRING_SSL_CAPATH], (char *) CURL_CA_PATH);
#endif
//data.wildcardmatch = FALSE;
//data.chunk_bgn = ZERO_NULL;
//data.chunk_end = ZERO_NULL;
}