protected override void SolveInstance(IGH_DataAccess DA)
{
// Set up Utility object and start process
Utility utility = new Utility(DA);
utility.Print("Starting Beams.");
List <string> instructionData = new List <string>();
// Get Inputs
string folderPath = null, fileName = null;
bool write = false;
if (!utility.GetInput(0, ref write)) // 0 - Write command is required
{
utility.WriteOut();
return;
}
if (!utility.GetInput(1, ref folderPath)) // 1 - Folder path is required
{
utility.WriteOut();
return;
}
utility.GetInput(2, ref fileName, true, true, true); // 2 - File name is optional
if (fileName == null)
{
fileName = this.DEFAULT_FILE_NAME;
}
string familyName = null, typeName = null; // 3, 4 - Family and type are optional but both must be provided if used.
utility.GetInput(3, ref familyName);
utility.GetInput(4, ref typeName);
GH_Structure <GH_Point> points = null; // 5 - Points in Data Tree required
if (!utility.GetInput(5, out points))
{
return;
}
List <double> rotations = null; // 6 - Rotations list optional
utility.GetInput(6, ref rotations);
int iMaxCountRotate = 0;
if (rotations != null)
{
iMaxCountRotate = rotations.Count;
}
List <string> parameterNames = null; // 7, 8 - Parameter names list and values tree are optional but both must be provided if used.
GH_Structure <GH_String> parameterValues = null;
string[,] parameterArray = null;
utility.GetParameterValueArray(7, 8, ref parameterNames, out parameterValues, out parameterArray);
int iMaxCountParam = 0, jMaxCountParam = 0;
if (parameterArray != null)
{
iMaxCountParam = parameterArray.GetLength(0);
jMaxCountParam = parameterArray.GetLength(1);
if (parameterNames.Count < jMaxCountParam)
{
jMaxCountParam = parameterNames.Count;
}
}
if (write)
{
try {
// Create RevitModelBuilderUtility object and link to CSV file
CsvWriter csvWriter = new CsvWriter();
utility.Print("CsvWriter Version: " + csvWriter.Version);
if (!utility.EstablishCsvLink(csvWriter, folderPath, fileName))
{
utility.Print("EstablishCsvLink() failed");
utility.WriteOut();
return;
}
// Set Family and Type
if (familyName != null && typeName != null)
{
csvWriter.SetBeamType(familyName, typeName);
}
// Loop for each beam, get points, and place component; then set parameter values
double lastRotationValue = 0;
for (int i = 0; i < points.Branches.Count; i++)
{
// Set rotation if necessary
if (rotations != null)
{
if (i < iMaxCountRotate)
{
if (Math.Abs(lastRotationValue - rotations[i]) > 0.00000001)
{
csvWriter.SetBeamRotation(rotations[i]);
lastRotationValue = rotations[i];
}
}
}
// Add the beam
List <List <HbCurve> > curvesListListRevit = new List <List <HbCurve> >();
List <Grasshopper.Kernel.Types.GH_Point> branch = points.Branches[i];
HbXYZ hbXYZ1 = new HbXYZ(branch[0].Value.X, branch[0].Value.Y, branch[0].Value.Z);
HbXYZ hbXYZ2 = new HbXYZ(branch[1].Value.X, branch[1].Value.Y, branch[1].Value.Z);
csvWriter.AddBeam(hbXYZ1, hbXYZ2);
// Set parameters if needed. Assume user has matched the list lengths. Error handling silently truncates if they don't match.
if (parameterArray != null)
{
for (int j = 0; j < parameterNames.Count; j++)
{
if (i < iMaxCountParam && j < jMaxCountParam)
{
csvWriter.ModifyParameterSet(parameterNames[j], parameterArray[i, j]);
instructionData.Add("Add Beam:");
}
}
}
}
csvWriter.WriteFile();
utility.Print("Beams completed successfully.");
}
catch (Exception exception) {
utility.Print(exception.Message);
}
}
utility.WriteOut();
DA.SetDataList(1, instructionData);
}
// ************************************************** Public Functions ***********************************************
public bool CreateStructure()
{
string filePath = this.csvFolderPath + FILE_NAME_STRUCTURE;
CsvWriter csvWriter = new CsvWriter();
string returnValue = csvWriter.ConnectToFile(filePath);
if (returnValue != "")
{
MessageBox.Show(returnValue);
return(false);
}
if (this.preserveId)
{
// Note that if file doesn't exist yet we ignore option to preserve ID values
if (File.Exists(filePath))
{
try {
returnValue = csvWriter.ReadElementIds();
if (returnValue != "")
{
MessageBox.Show(returnValue);
return(false);
}
}
catch (Exception exception) {
MessageBox.Show("Exception at csvWriter.ReadElementIds(): " + exception.Message);
return(false);
}
}
}
csvWriter.SetBeamJustification("Top");
HbXYZ point1A, point2A, point3A, point4A;
HbXYZ point1B = new HbXYZ(0, 0, 0); HbXYZ point2B = new HbXYZ(0, 0, 0);
HbXYZ point3B = new HbXYZ(0, 0, 0); HbXYZ point4B = new HbXYZ(0, 0, 0);
//mModelBuilder. beam tops?
//double elevationFloor, elevationWall; //, x1, x2, x3, x4, y1, y2, y3, y4;
XY p1, p2, p3, p4;
for (int i = 0; i < NumberFloors; i++)
{
//Calculate(i, out elevationFloor, out elevationWall, out p1, out p2, out p3, out p4);
double elevationBeam = i * FloorHeight - constantFloorThickness;
Calculate(i, -4 * constantWallThickness, out p1, out p2, out p3, out p4);
point1A = new HbXYZ(p1.X, p1.Y, elevationBeam);
point2A = new HbXYZ(p2.X, p2.Y, elevationBeam);
point3A = new HbXYZ(p3.X, p3.Y, elevationBeam);
point4A = new HbXYZ(p4.X, p4.Y, elevationBeam);
if (i != 0)
{
csvWriter.AddColumn(point1B, point1A);
csvWriter.AddColumn(point2B, point2A);
csvWriter.AddColumn(point3B, point3A);
csvWriter.AddColumn(point4B, point4A);
}
csvWriter.AddBeam(point1A, point2A);
csvWriter.AddBeam(point2A, point3A);
csvWriter.AddBeam(point3A, point4A);
csvWriter.AddBeam(point4A, point1A);
point1B = new HbXYZ(point1A.X, point1A.Y, point1A.Z);
point2B = new HbXYZ(point2A.X, point2A.Y, point2A.Z);
point3B = new HbXYZ(point3A.X, point3A.Y, point3A.Z);
point4B = new HbXYZ(point4A.X, point4A.Y, point4A.Z);
}
csvWriter.WriteFile();
return(true);
}
// ******************************************************** Private Functions ********************************************************
private bool RunProcess()
{
Cursor.Current = Cursors.WaitCursor;
try {
CsvWriter csvWriter = new CsvWriter();
// ********************************************************************************************************************************
// ************************************* HummingbirdUtility Basic Function Signatures ***************************************
// ********************************************************************************************************************************
//
// "Version" is a property of the ExcelWriter object.
// Revit classes "XYZ", "Line", "Arc", "Ellipse", "NurbSpline", and "HermiteSpline" have corresponding classes in Hummingbird named
// "HbXYZ", "HbLine", "HbArc", "HbEllipse", "HbNurbSpline", and "HbHermiteSpline" which derive from a parent class of "HbItem".
// These have constructors:
// HbXYZ(double x, double y, double z)
// HbLine(HbXYZ pointStart, HbXYZ pointEnd)
// HbArc(HbXYZ pointStart, HbXYZ pointEnd, HbXYZ pointMid)
// HbEllipse(HbXYZ pointFirst, HbXYZ pointSecond, double radiusY, string mode) radiusY is perpendicular to points; mode "Half" or "Full".
// HbNurbSpline(List<HbXYZ> points)
// HbHermiteSpline(List<HbXYZ> points)
// (Note, these also have a default constructor with no parameters and properties that correspond to the parameters that must be set individually.)
// They also have special functions specifically for use with Autodesk DesignScript
// static HbXYZ New(double x, double y, double z)
// static HbLine New(HbXYZ pointStart, HbXYZ pointEnd)
// static HbArc New(HbXYZ pointStart, HbXYZ pointEnd, HbXYZ pointMid)
// static HbEllipse New(HbXYZ pointFirst, HbXYZ pointSecond, double radiusY, string mode) radiusY is perpendicular to points; mode "Half" or "Full".
// static HbNurbSpline New(List<HbXYZ> points)
// static HbHermiteSpline New(List<HbXYZ> points)
// There are also some list functions that workaround the lack of a native "List" object in DesignScript
// HbItemList()
// static void Add(HbItemList list, HbItem hbItem)
// HbItemListList()
// static void Add(HbItemListList listList, HbItemList list)
//
// The following are methods of the ExcelWriter object.
//
// List of worksheet names:
// List<string> GetWorksheetNames()
//
// Set Actions:
// void SetLevel(string levelName)
// void SetWallType(string wallTypeName)
// void SetWallHeight(double height)
// void SetFloorType(string floorTypeName)
// void SetFamilyType(string familyName, string typeName)
// void SetFamilyFlipped(bool flipHand, bool flipFacing)
// void SetFamilyMirrored(bool mirrorX, bool mirrorY)
// void SetFamilyRotation(double rotation)
// void SetColumnMode(string mode, string familyName, string typeName)
// void SetColumnHeight(double height)
// void SetColumnRotation(double rotation)
// void SetBeamType(string familyName, string typeName)
// void SetBeamJustification(string justification) {
// void SetBeamRotation(double rotation) {
// void SetAdaptiveComponentType(string familyName, string typeName)
// void SetFamilyExtrusionHeight(double height)
// void SetMullionType(string familyName, string typeName)
//
// Add Actions:
// void AddGrid(HbXYZ point1, HbXYZ point2) // Line case
// void AddGrid(HbXYZ point1, HbXYZ point2, HbXYZ point3) // Arc case (point1 = start; point2 = end; point3 = any point in arc.)
// void AddLevel(double elevation, string name = null) { // name is optional
// void AddDetailLine(HbXYZ point1, HbXYZ point2)
// void AddDetailArc(HbXYZ point1, HbXYZ point2, HbXYZ point3)
// void AddDetailEllipse(HbXYZ point1, HbXYZ point2, double radiusY, string mode)
// void AddDetailNurbsSpline(HbXYZ point1, HbXYZ point2, HbXYZ point3 = null, HbXYZ point4 = null) // points 3 and 4 are optional
// void AddDetailNurbsSpline(List<HbXYZ> points)
// void AddDetailCurves(List<HbItem> curves)
// void AddModelLine(HbXYZ point1, HbXYZ point2)
// void AddModelArc(HbXYZ point1, HbXYZ point2, HbXYZ point3)
// void AddModelEllipse(HbXYZ point1, HbXYZ point2, double radiusY, string mode)
// void AddModelNurbsSpline(HbXYZ point1, HbXYZ point2, HbXYZ point3 = null, HbXYZ point4 = null) // points 3 and 4 are optional
// void AddModelNurbsSpline(List<HbXYZ> points)
// void AddModelCurves(List<HbItem> curves)
// void AddTopographySurface(HbXYZ point1, HbXYZ point2, HbXYZ point3, HbXYZ point4 = null) {
// void AddTopographySurface(List<HbXYZ> points) {
// void AddWall(HbXYZ point1, HbXYZ point2) // Straight line in plan.
// void AddWall(HbXYZ point1, HbXYZ point2, HbXYZ point3) // Arc in plan
// void AddWall(List<HbItem> curvesList) // List of lines, arcs, ellipses, or splines in plan
// void AddWall(List<List<HbItem>> curvesList) // List of Lists controls profile in elevation
// void AddFloor(HbXYZ point1, HbXYZ point2, HbXYZ point3, HbXYZ point4)
// void AddFloor(List<List<HbItem>> curvesList)
// void AddFamilyInstance(HbXYZ point1)
// void AddColumn(HbXYZ point1)
// void AddColumn(HbXYZ point1, HbXYZ point2)
// void AddBeam(HbXYZ point1, HbXYZ point2)
// void AddAdaptiveComponent(HbXYZ point1, HbXYZ point2 = null, HbXYZ point3 = null, HbXYZ point4 = null) // points 2, 3, and 4 are optional
// void AddAdaptiveComponent(List<HbXYZ> points)
// void AddAreaBoundaryLine(HbXYZ point1, HbXYZ point2) // Line case
// void AddAreaBoundaryLine(HbXYZ point1, HbXYZ point2, HbXYZ point3) // Arc case
// void AddAreaBoundaryLine(HbXYZ point1, HbXYZ point2, double radiusY, string mode) // Ellipse case
// void AddAreaBoundaryLine(List<HbXYZ> points) // Spline case
// void AddAreaBoundaryLine(List<HbItem> curves) // List of lines, arcs, ellipses, or splines in plan
// void AddRoomSeparationLine(HbXYZ point1, HbXYZ point2) // Line case
// void AddRoomSeparationLine(HbXYZ point1, HbXYZ point2, HbXYZ point3) // Arc case
// void AddRoomSeparationLine(HbXYZ point1, HbXYZ point2, double radiusY, string mode) // Ellipse case
// void AddRoomSeparationLine(List<HbXYZ> points) // Spline case
// void AddRoomSeparationLine(List<HbItem> curves) // List of lines, arcs, ellipses, or splines in plan
// void AddArea(HbXYZ point1);
// void AddRoom(HbXYZ point1);
// void AddReferencePoint(HbXYZ point)
// void AddCurveByPoints(List<HbXYZ> points)
// void AddloftForm(List<List<HbXYZ>> points)
// void AddFamilyExtrusion(List<List<HbItem>> curvesList, string nameFamily = null, HbXYZ pointInsert = null) {
// void AddFamilyExtrusion(List<List<HbItem>> curvesList, HbXYZ pointInsert) {
//
// Modify Actions:
// void ModifyParameterSet(string parameterName, string value)
// void ModifyCurtainGridUAdd(double offsetPrimary);
// void ModifyCurtainGridUAdd(double offsetPrimary, double offsetSecondary);
// void ModifyCurtainGridVAdd(double offsetPrimary);
// void ModifyCurtainGridVAdd(double offsetPrimary, double offsetSecondary);
// void ModifyMullionUAdd(double offsetPrimary);
// void ModifyMullionUAdd(double offsetPrimary, double offsetSecondary);
// void ModifyMullionVAdd(double offsetPrimary);
// void ModifyMullionVAdd(double offsetPrimary, double offsetSecondary);
// ************************************************************************************************************************************
// ************************************* RevitModelBuilderUtility Component Function Signatures ***************************************
// ************************************************************************************************************************************
//
// Users will typically avoid using these in favor of the basic forms. Provided here only for completeness
//
// Use-Add Actions:
// void UsePoints(HbXYZ point1, HbXYZ point2 = null, HbXYZ point3 = null, HbXYZ point4 = null) { // points 2, 3, and 4 are optional
// void UsePoints(List<HbXYZ> points) // General form of more than four points
// void AddDetailNurbsSpline() // Must follow UsePoints
// void AddModelNurbsSpline() // Must follow UsePoints
// void AddAdaptiveComponent() // Must follow UsePoints
// void AddAreaBoundaryLine() // Spline - Must follow UsePoints (Note: no simple form of spline is currently offered
// void AddRoomSeparationLine() // Spline - Must follow UsePoints (Note: no simple form of spline is currently offered
// void AddCurveByPoints() // Must follow UsePoints
// void AddTopographySurface() // Must follow UsePoints
//
// Draw-Use-Add Actions:
// (Also see UsePoints() above)
// void DrawCurveArray()
// void DrawLine(HbXYZ point1, HbXYZ point2)
// void DrawArc(HbXYZ point1, HbXYZ point2, HbXYZ point3)
// void AddWall()
// void AddFloor()
// void AddFamilyExtrusion(string nameFamily, HbXYZ pointInsert = null) { // Must follow a Curve Array Set
// void DrawCurveArray(List<HbItem> curves) { // Combined form; curves must be HbItem type
//
// Model-Use-Add Actions:
// (Also see UsePoints() above)
// void ModelReferenceArray() // Must be first statement
// void AddLoftForm() // Must follow ModelReferenceArray() and UsePoints()
//
// ****************************************************************************************************************
// ******************************************* Start of Sample Code Section ***************************************
// ****************************************************************************************************************
//
// This is the portion of the code that is typically emulated for a particular project use.
// Sample Revit hb items and lists
HbXYZ point11 = new HbXYZ(0, 0, 0); HbXYZ point12 = new HbXYZ(10, 0, 0); HbXYZ point13 = new HbXYZ(20, 0, 0); HbXYZ point14 = new HbXYZ(15, 5, 0);
HbXYZ point21 = new HbXYZ(0, 10, 0); HbXYZ point22 = new HbXYZ(10, 10, 0); HbXYZ point23 = new HbXYZ(20, 10, 0); HbXYZ point24 = new HbXYZ(15, 15, 0);
List <HbXYZ> pointsList1 = new List <HbXYZ>(); pointsList1.Add(point11); pointsList1.Add(point12); pointsList1.Add(point13); pointsList1.Add(point14);
List <HbXYZ> pointsList2 = new List <HbXYZ>(); pointsList2.Add(point21); pointsList2.Add(point22); pointsList2.Add(point23); pointsList2.Add(point24);
//List<HbXYZ> pointsList3 = new List<HbXYZ>(); pointsList3.Add(point21); pointsList3.Add(point22); pointsList3.Add(point23);
// pointsList3.Add(point24); pointsList3.Add(point24); pointsList3.Add(point24);
List <List <HbXYZ> > pointsListList = new List <List <HbXYZ> >(); pointsListList.Add(pointsList1); pointsListList.Add(pointsList2);
HbLine line1 = new HbLine(); line1.PointStart = point11; line1.PointEnd = point12;
HbLine line2 = new HbLine(); line2.PointStart = point21; line2.PointEnd = point22;
HbArc arc1 = new HbArc(); arc1.PointStart = point11; arc1.PointEnd = point12; arc1.PointMid = point13;
HbArc arc2 = new HbArc(); arc2.PointStart = point21; arc2.PointEnd = point22; arc2.PointMid = point23;
HbNurbSpline nurbSpline1 = new HbNurbSpline(); nurbSpline1.Points.Add(point21); nurbSpline1.Points.Add(point12); nurbSpline1.Points.Add(point23);
HbNurbSpline nurbSpline2 = new HbNurbSpline(); nurbSpline2.Points.Add(point11); nurbSpline2.Points.Add(point22); nurbSpline2.Points.Add(point13);
HbNurbSpline nurbSpline3 = new HbNurbSpline(); nurbSpline3.Points.Add(point11); nurbSpline3.Points.Add(point22); nurbSpline3.Points.Add(point13);
nurbSpline3.Points.Add(point11); nurbSpline3.Points.Add(point22); nurbSpline3.Points.Add(point13);
List <HbCurve> curvesList1 = new List <HbCurve>(); curvesList1.Add(line1); curvesList1.Add(arc1); curvesList1.Add(nurbSpline1);
List <HbCurve> curvesList2 = new List <HbCurve>(); curvesList2.Add(line2); curvesList2.Add(arc2); curvesList2.Add(nurbSpline3);
List <List <HbCurve> > curvesListList = new List <List <HbCurve> >(); curvesListList.Add(curvesList1); curvesListList.Add(curvesList2);
double levelElevation = 100; // for Level
string levelName = "A New Level";
double radiusY = 10; // for ellipse
string mode = "Full";
double offsetPrimary = 5; // for curtain gridds and mullions
double offsetSecondary = 10;
// Display the version
MessageBox.Show("csvWriter.Version: " + csvWriter.Version);
// Start .csv file
textBoxCsvFolder.Text = textBoxCsvFolder.Text.Trim();
if (!textBoxCsvFolder.Text.EndsWith(@"\"))
{
textBoxCsvFolder.Text = textBoxCsvFolder.Text + @"\";
}
this.csvFolderPath = textBoxCsvFolder.Text;
textBoxCsvFileName.Text = textBoxCsvFileName.Text.Trim();
if (!textBoxCsvFileName.Text.ToLower().EndsWith(".csv"))
{
textBoxCsvFileName.Text = textBoxCsvFileName.Text + ".csv";
}
this.csvFileName = textBoxCsvFileName.Text;
this.csvFilePath = this.csvFolderPath + this.csvFileName;
string returnMMessage = csvWriter.ConnectToFile(this.csvFilePath);
if (returnMMessage != "")
{
MessageBox.Show(returnMMessage);
return(false);
}
// If checked, get ID values
if (checkBoxPreserveId.Checked)
{
// Note that if file doesn't exist yet we ignore option to preserve ID values
if (File.Exists(this.csvFilePath))
{
try {
string returnValue = csvWriter.ReadElementIds();
if (returnValue != "")
{
MessageBox.Show("csvWriter.ReadElementIds() failed: " + returnValue, PROGRAM_NAME);
return(false);
}
}
catch (Exception exception) {
MessageBox.Show("Exception in RunProcess() at csvWriter.ReadElementIds(): " + exception.Message, PROGRAM_NAME);
return(false);
}
}
}
// Set Actions:
csvWriter.SetLevel("Level 1");
csvWriter.SetWallType("WallTypeName");
csvWriter.SetWallHeight(10);
csvWriter.SetFloorType("FloorTypeName");
csvWriter.SetFamilyType("FamilyFamilyName", "FamilyTypeName");
csvWriter.SetFamilyFlipped(true, false);
csvWriter.SetFamilyMirrored(false, true);
csvWriter.SetFamilyRotation(45);
csvWriter.SetColumnMode("Architectural", "ColumnFamilyName", "ColumnTypeName");
csvWriter.SetColumnHeight(10);
csvWriter.SetColumnRotation(45);
csvWriter.SetBeamType("BeamFamilyName", "BeamTypeName");
csvWriter.SetBeamJustification("Top");
csvWriter.SetBeamRotation(45);
csvWriter.SetAdaptiveComponentType("ACompFamilyName", "ACompTypeName");
csvWriter.SetFamilyExtrusionHeight(40);
csvWriter.SetMullionType("AMullionFamilyName", "AMullionTypeName");
//
// Add Actions:
csvWriter.AddGrid(point11, point12); // Line case
csvWriter.AddGrid(point11, point12, point13); // Arc case
levelElevation = 100; // for Level
csvWriter.AddLevel(levelElevation, levelName);
csvWriter.AddLevel(levelElevation); // name is optional
csvWriter.AddDetailLine(point11, point12);
csvWriter.AddDetailArc(point11, point12, point13);
csvWriter.AddDetailEllipse(point11, point12, radiusY, mode);
csvWriter.AddDetailNurbsSpline(point11, point12, point13, point14);
csvWriter.AddDetailNurbsSpline(pointsList1);
csvWriter.AddDetailCurves(curvesList1);
csvWriter.AddDetailCurves(curvesList2);
csvWriter.AddModelLine(point11, point12);
csvWriter.AddModelArc(point11, point12, point13);
csvWriter.AddModelEllipse(point11, point12, radiusY, mode);
csvWriter.AddModelNurbsSpline(point11, point12); // points 3 and 4 are optional
csvWriter.AddModelNurbsSpline(point11, point12, point13);
csvWriter.AddModelNurbsSpline(point11, point12, point13, point14);
csvWriter.AddModelNurbsSpline(pointsList1);
csvWriter.AddModelCurves(curvesList1);
csvWriter.AddTopographySurface(point11, point12, point13);
csvWriter.AddTopographySurface(point11, point12, point13, point14);
csvWriter.AddTopographySurface(pointsList1);
csvWriter.AddWall(point11, point12);
csvWriter.AddWall(point11, point12, point13);
csvWriter.AddWall(curvesList1); // Plan list
csvWriter.AddWall(curvesListList); // Profile list of lists
csvWriter.AddFloor(point11, point12, point13, point14);
csvWriter.AddFloor(curvesListList);
csvWriter.AddFamilyInstance(point11);
csvWriter.AddColumn(point11);
csvWriter.AddColumn(point11, point12);
csvWriter.AddBeam(point11, point12);
csvWriter.AddAdaptiveComponent(point11); // points 2, 3, and 4 are optional
csvWriter.AddAdaptiveComponent(point11, point12);
csvWriter.AddAdaptiveComponent(point11, point12, point13);
csvWriter.AddAdaptiveComponent(point11, point12, point13, point14);
csvWriter.AddAdaptiveComponent(pointsList1);
csvWriter.AddAreaBoundaryLine(point11, point12); // Line case
csvWriter.AddAreaBoundaryLine(point11, point12, point13); // Arc case
csvWriter.AddAreaBoundaryLine(point11, point12, radiusY, mode); // Ellipse case
csvWriter.AddAreaBoundaryLine(pointsList1); // Spline case
csvWriter.AddAreaBoundaryLine(curvesList1); // List of lines, arcs, ellipses, or splines in plan
csvWriter.AddRoomSeparationLine(point11, point12); // Line case
csvWriter.AddRoomSeparationLine(point11, point12, point13); // Arc case
csvWriter.AddRoomSeparationLine(point11, point12, radiusY, mode); // Ellipse case
csvWriter.AddRoomSeparationLine(pointsList1); // Spline case
csvWriter.AddRoomSeparationLine(curvesList1); // List of lines, arcs, ellipses, or splines in plan
csvWriter.AddArea(point11);
csvWriter.AddRoom(point11);
csvWriter.AddReferencePoint(point11);
csvWriter.AddCurveByPoints(pointsList1);
csvWriter.AddLoftForm(pointsListList);
////TODO Not handling this case for now. It is not allowed in the specification and not sure how it got inot the sample data
//csvWriter.AddFamilyExtrusion(curvesListList, "ExtrusionFamilyName", point11);
//csvWriter.AddFamilyExtrusion(curvesListList, "ExtrusionFamilyName");
//csvWriter.AddFamilyExtrusion(curvesListList, point11);
//csvWriter.AddFamilyExtrusion(curvesListList);
//
// Modify Actions:
csvWriter.ModifyParameterSet("ParameterName", "Value");
csvWriter.ModifyCurtainGridUAdd(offsetPrimary);
csvWriter.ModifyCurtainGridUAdd(offsetPrimary, offsetSecondary);
csvWriter.ModifyCurtainGridVAdd(offsetPrimary);
csvWriter.ModifyCurtainGridVAdd(offsetPrimary, offsetSecondary);
csvWriter.ModifyMullionUAdd(offsetPrimary);
csvWriter.ModifyMullionUAdd(offsetPrimary, offsetSecondary);
csvWriter.ModifyMullionVAdd(offsetPrimary);
csvWriter.ModifyMullionVAdd(offsetPrimary, offsetSecondary);
// These commands can also be used but it is proably better to try to use one of the more compact forms above.
// Use-Add Actions:
csvWriter.UsePoints(point11, point12, point13, point14);
csvWriter.UsePoints(pointsList1);
csvWriter.AddDetailNurbsSpline();
csvWriter.UsePoints(pointsList1);
csvWriter.AddModelNurbsSpline();
csvWriter.UsePoints(pointsList1);
csvWriter.AddAdaptiveComponent();
csvWriter.UsePoints(pointsList1);
csvWriter.AddAreaBoundaryLine(); // Spline - Must follow UsePoints (Note: no simple form of spline is currently offered
csvWriter.UsePoints(pointsList1);
csvWriter.AddRoomSeparationLine(); // Spline - Must follow UsePoints (Note: no simple form of spline is currently offered
csvWriter.UsePoints(pointsList1);
csvWriter.AddCurveByPoints();
// Draw-Use-Add Actions:
csvWriter.DrawCurveArray(); //This is non-combined form
csvWriter.DrawLine(point11, point12);
csvWriter.DrawArc(point11, point12, point13);
csvWriter.AddWall();
csvWriter.DrawCurveArray();
csvWriter.DrawLine(point11, point12);
csvWriter.DrawArc(point11, point12, point13);
csvWriter.AddFloor();
csvWriter.DrawCurveArray();
csvWriter.DrawLine(point11, point12);
csvWriter.DrawArc(point11, point12, point13);
csvWriter.AddFamilyExtrusion("ExtrusionFamilyName", point11);
csvWriter.DrawCurveArray();
csvWriter.DrawLine(point11, point12);
csvWriter.DrawArc(point11, point12, point13);
csvWriter.AddFamilyExtrusion("ExtrusionFamilyName");
csvWriter.DrawCurveArray(curvesList1); //This is combined form
csvWriter.AddFamilyExtrusion();
// Model-Use-Add Actions:
// (These examples are not complete)
csvWriter.ModelReferenceArray();
csvWriter.AddLoftForm();
// Write the file
csvWriter.WriteFile();
// ****************************************************************************************************************
// ******************************************** End of Sample Code Section ****************************************
// ****************************************************************************************************************
MessageBox.Show("Process Completed", PROGRAM_NAME);
return(true);
}
catch (Exception exception) {
MessageBox.Show("Error in 'RunProcess()'.\nSystem message: " + exception.Message, PROGRAM_NAME);
return(false);
}
finally {
Cursor.Current = Cursors.Default;
}
}
