void ReconstructWallByCurve
(
Document doc,
ref Autodesk.Revit.DB.Element element,
Rhino.Geometry.Curve curve,
Optional <Autodesk.Revit.DB.WallType> type,
Optional <Autodesk.Revit.DB.Level> level,
[Optional] bool structural,
[Optional] double height,
[Optional] WallLocationLine locationLine,
[Optional] bool flipped,
[Optional, NickName("J")] bool allowJoins
)
{
var scaleFactor = 1.0 / Revit.ModelUnits;
if
(
scaleFactor != 1.0 ? !curve.Scale(scaleFactor) : true &&
curve.IsShort(Revit.ShortCurveTolerance) ||
!(curve.IsLinear(Revit.VertexTolerance) || curve.IsArc(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
ThrowArgumentException(nameof(curve), "Curve must be a horizontal line or arc curve");
}
SolveOptionalType(ref type, doc, ElementTypeGroup.WallType, nameof(type));
double axisMinZ = Math.Min(curve.PointAtStart.Z, curve.PointAtEnd.Z);
bool levelIsEmpty = SolveOptionalLevel(ref level, doc, curve, nameof(level));
height *= scaleFactor;
if (height < Revit.VertexTolerance)
{
height = (type.HasValue ? type.Value : null)?.GetCompoundStructure()?.SampleHeight ?? LiteralLengthValue(6.0) / Revit.ModelUnits;
}
// Axis
var levelPlane = new Rhino.Geometry.Plane(new Rhino.Geometry.Point3d(0.0, 0.0, level.Value.Elevation), Rhino.Geometry.Vector3d.ZAxis);
curve = Rhino.Geometry.Curve.ProjectToPlane(curve, levelPlane);
var curves = curve.ToHost().ToArray();
Debug.Assert(curves.Length == 1);
var centerLine = curves[0];
// LocationLine
if (locationLine != WallLocationLine.WallCenterline)
{
double offsetDist = 0.0;
var compoundStructure = type.Value.GetCompoundStructure();
if (compoundStructure == null)
{
switch (locationLine)
{
case WallLocationLine.WallCenterline:
case WallLocationLine.CoreCenterline:
break;
case WallLocationLine.FinishFaceExterior:
case WallLocationLine.CoreExterior:
offsetDist = type.Value.Width / +2.0;
break;
case WallLocationLine.FinishFaceInterior:
case WallLocationLine.CoreInterior:
offsetDist = type.Value.Width / -2.0;
break;
}
}
else
{
if (!compoundStructure.IsVerticallyHomogeneous())
{
compoundStructure = CompoundStructure.CreateSimpleCompoundStructure(compoundStructure.GetLayers());
}
offsetDist = compoundStructure.GetOffsetForLocationLine(locationLine);
}
if (offsetDist != 0.0)
{
centerLine = centerLine.CreateOffset(flipped ? -offsetDist : offsetDist, XYZ.BasisZ);
}
}
// Type
ChangeElementTypeId(ref element, type.Value.Id);
Wall newWall = null;
if (element is Wall previousWall && previousWall.Location is LocationCurve locationCurve && centerLine.IsSameKindAs(locationCurve.Curve))
{
newWall = previousWall;
locationCurve.Curve = centerLine;
}
public void createWall()
{
try
{
//Wall.Create(Document document, Curve curve, ElementId wallTypeId, ElementId levelId, double wallHeight, double wallOffset, bool flip, bool structural)
WallType yeniWallType = null;
bool bulundu = false;
FilteredElementCollector wallTypes = new FilteredElementCollector(doc).OfClass(typeof(WallType));
ElementId defaultElementTypeId = doc.GetDefaultElementTypeId(ElementTypeGroup.WallType);
#region Informatik isimli duvar tipini ara, yoksa yarat
foreach (WallType wt in wallTypes)
{
if (wt.Name == "Informatik")
{
informatikWallId = wt.Id;
bulundu = true;
break;
}
}
if (bulundu == false)
{
foreach (WallType wt in wallTypes)
{
if (wt.Id == defaultElementTypeId)
{
using (Transaction transaction = new Transaction(doc, "DuplicateWallType"))
{
transaction.Start();
yeniWallType = wt.Duplicate("Informatik") as WallType;
CompoundStructure cs = yeniWallType.GetCompoundStructure();
ElementId materialId = new ElementId(539);
IList <CompoundStructureLayer> cslList = new List <CompoundStructureLayer>();
CompoundStructureLayer csl = new CompoundStructureLayer(20 * mmToFeet, MaterialFunctionAssignment.Finish1, materialId);
cslList.Add(csl);
csl = new CompoundStructureLayer(160 * mmToFeet, MaterialFunctionAssignment.Structure, materialId);
cslList.Add(csl);
csl = new CompoundStructureLayer(20 * mmToFeet, MaterialFunctionAssignment.Finish2, materialId);
cslList.Add(csl);
CompoundStructure yeniStructure = CompoundStructure.CreateSimpleCompoundStructure(cslList);
yeniWallType.SetCompoundStructure(yeniStructure);
doc.SetDefaultElementTypeId(ElementTypeGroup.WallType, yeniWallType.Id);
transaction.Commit();
informatikWallId = yeniWallType.Id;
}
break;
}
}
}
#endregion
#region levelId bul
List <Level> levels = new List <Level>();
FilteredElementCollector filteredLevelCollector = new FilteredElementCollector(doc);
filteredLevelCollector.OfClass(typeof(Level));
levels = filteredLevelCollector.Cast <Level>().ToList();
ElementId levelId = null;
foreach (Level l in levels)
{
if (l.Name == "Level 0")
{
levelId = l.Id;
break;
}
}
#endregion
#region cizgileri seçtirt
uiApp.ActiveUIDocument.Selection.GetElementIds().Clear();
ISelectionFilter selFilter = new ModelLineSelectionFilter();
this.Hide();
IList <Reference> curves = uiApp.ActiveUIDocument.Selection.PickObjects(ObjectType.Element, selFilter, "Select path Curve(s) for partition wall");
this.Show();
#endregion
#region set computing options
Options opt = new Options();
opt.ComputeReferences = true;
opt.IncludeNonVisibleObjects = true;
opt.View = doc.ActiveView;
#endregion
#region duvar yüksekliği ve offsetini belirle
double wallHeight = 3000 * mmToFeet;
double wallOffset = 0;
#endregion
List <Wall> yeniDuvarlar = new List <Wall>();
if (curves.Count > 0)
{
#region döngü
for (int i = 0; i < curves.Count; i++)
{
XYZ globalPoint;
Wall yeniDuvar = null;
globalPoint = curves[i].GlobalPoint;
Element tempCurve = doc.GetElement(curves[i]) as Element;
Curve curve = null;
if (tempCurve != null)
{
#region element geometrisinden Curve bulunabiliyor mu
foreach (var geoObj in tempCurve.get_Geometry(opt))
{
Curve cv = geoObj as Curve;
if (cv != null)
{
curve = cv;
break;
}
}
#endregion
#region duvar üret
if (curve != null)
{
using (Transaction wallCreate = new Transaction(doc, "Duvar Yarat"))
{
wallCreate.Start();
yeniDuvar = Wall.Create(doc, curve, informatikWallId, levelId, wallHeight, wallOffset, false, false);
if (yeniDuvar != null)
{
yeniDuvarlar.Add(yeniDuvar);
}
wallCreate.Commit();
}
}
#endregion
}
}
#endregion
//BuiltInParameter myParameter = BuiltInParameter.DIVIDED_SURFACE_DISPLAY_ORIGINAL_SURFACE;
//Element myElement = yeniDuvar as Element;
//myElement.get_Parameter(myParameter).Set();
#region parametreleri kontrol et
if (yeniDuvarlar.Count > 0)
{
Wall yeniDuvar = yeniDuvarlar[0];
string s = string.Empty;
foreach (Parameter p in yeniDuvar.Parameters)
{
s += "Name=" + p.Definition.Name + " StorageType=" + p.StorageType.ToString() + "\r\n";
}
MessageBox.Show(s);
}
#endregion
}
if (curves.Count < 1)
{
TaskDialog.Show("Seçilmedi", "En az bir çizgi seçmelisiniz");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}