private int DeviceCheck(ThirdPartyTool tool, out string strRet)
{
int ret = -1;
CmdProcess cmdProcess = new CmdProcess(); //cmd类
strRet = cmdProcess.ExeCommand(tool); //"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
//frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
ret = 0;
return(ret);
}
/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
//string pattern = null;
//eidRead = "NULL";
//两种情况进入此处:1、超时跳出了do while,2、按了空格确认上电
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
do
{
frmMain.DisplayLog("测试中...\r\n");
CmdProcess cmdProcess = new CmdProcess(); //cmd类
tool = new ThirdPartyTool()
{
ToolDirectory = "Microsoft Azure Sphere SDK",
ToolName = "InitializeCommandPrompt",
Cmd = "azsphere device wifi show-status"
};
string strRet;
#region //获取OS版本
//strRet = cmdProcess.ExeCommand("", "azsphere device show-ota-status");//"azsphere device wifi show-status"
//if (strRet.Contains("error: Could not connect to the device."))
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//if (strRet.Contains("is not a valid value"))
//{
// frmMain.DisplayLog(string.Format("未claim设备 获取OS版本失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
#endregion
//对比模块MAC地址-标签MAC地址
strRet = cmdProcess.ExeCommand("", "azsphere device wifi show-status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//ret = DeviceCheck(tool, out strRet);
//if (ret!=0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
string mouduleMac = cmdProcess.GetValueByKeyword(strRet, "MAC Address");
if (mouduleMac != labelSn)
{
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比不一致 FAIL\r\n", mouduleMac, labelSn));
break;
}
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比一致 PASS\r\n", mouduleMac, labelSn));
//检查是否有测试程序
//azsphere device sideload show-status
//azsphere device sideload delete
//azsphere device sideload deploy -p mt_app.img
//删除当前程序
frmMain.DisplayLog("当前程序删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("当前程序删除： 失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("当前程序删除：成功 PASS\r\n");
Thread.Sleep(500);
//Side load（加载测试固件）
frmMain.DisplayLog("测试固件加载中...\r\n");
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device sideload deploy -p ../app/{0}", TestAppName));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("加载测试固件：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("加载测试固件：成功 PASS\r\n", strRet));
string pinTestRetinfo;
//Socket复位
frmMain.DisplayLog("复位测试中...\r\n"); //成功 为有效信息
bool pinTestRet = PinTestBySocket("reset_tests", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n"); //失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("复位测试：失败 FAIL\r\n");//失败 为错误信息
break;
}
frmMain.DisplayLog("复位测试：合格 PASS\r\n");//成功 为有效信息
//Socket GPIO检查
frmMain.DisplayLog("GPIO测试中...\r\n");
pinTestRet = PinTestBySocket("get_gpios", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n");//失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("GPIO测试：测试失败 FAIL\r\n");//失败 为错误信息
break;
}
string errorStr;
bool gpioRet = GetGIPOResultBySocketRet(pinTestRetinfo, out errorStr);
//展示返回的GPIO数据
//strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
//frmMain.DisplayLog(strRet);
//GPIO结果显示
if (!gpioRet)
{
frmMain.DisplayLog("GPIO测试: 不合格 FAIL \r\n");
break;
}
frmMain.DisplayLog("GPIO测试：合格 PASS\r\n");//成功 为有效信息
#region 串口测试 复位和GPIO
////串口发送Reset System\r\n
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.Reset);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog(string.Format("复位命令未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
////if (!strRet.Contains("Get RST command"))
////{
//// frmMain.DisplayLog(string.Format("复位未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
//// break;
////}
////复位命令得到回应
//frmMain.DisplayLog(string.Format("复位中... \r\n"));
////跳出循环说明复位成功
//readWriteIdHandle.ReadRestInfo("init completed");
//frmMain.DisplayLog(string.Format("复位成功 PASS\r\n"));
////GPIO测试
////串口发送Reset System\r\n
//Thread.Sleep(1000);
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.GPIOTest);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog("GPIO测试命令未得到回应 串口失败 FAIL\r\n");
// break;
//}
////GPIO测试命令得到回应
////frmMain.DisplayLog("GPIO测试中... \r\n");
////string errorInfo;
////bool gpioRet = checkGIPOResult(strRet, out errorInfo);
//////展示返回的GPIO数据
////strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
////frmMain.DisplayLog(strRet);
//////GPIO结果显示
////if (!gpioRet)
////{
//// frmMain.DisplayLog(string.Format("GPIO测试:失败 FAIL \r\n详细：{0}\r\n", errorInfo));
//// break;
////}
////frmMain.DisplayLog("GPIO测试：成功 PASS\r\n");
#endregion
//删除APPtest
frmMain.DisplayLog("测试固件删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("测试固件删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("测试固件删除：成功 PASS\r\n");
frmMain.DisplayLog("Wifi列表网络检查中...\r\n");
//检查网络 wifi表
strRet = cmdProcess.ExeCommand("", "azsphere device wifi list");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("No networks found") && strRet.Contains("ID"))
{
//Get ID
string[] wifiIdList = cmdProcess.GetListByKeyword(strRet, "ID").ToArray();
foreach (var item in wifiIdList)
{
frmMain.DisplayLog("WIFI列表检查：含有WIFI列表ID,删除中...\r\n");
//不为空
if (!string.IsNullOrEmpty(item))
{
//删除ID
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device wifi delete –i {0}", item));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
//不包含成功信息且不包含
if (!strRet.Contains("Successfully removed network") && !strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("WIFI列表ID删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
}
}
}
frmMain.DisplayLog("WIFI列表检查：PASS\r\n");
//性能测试
frmMain.DisplayLog("capabilties测试中...\r\n");
Capability:
strRet = cmdProcess.ExeCommand("", "azsphere device capability show-attached");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
List <string> capabilitiesList = cmdProcess.GetListCapabilitiesKeyword(strRet, "Enable");
if (capabilitiesList.Count > 0)
{
//manufacture set complete status，只能设置一次，设置后就不能够RF测试和校准了，测试阶段不要轻易尝试。
#region
if (IsManufactureComplete == 1)
{
strRet = cmdProcess.ExeCommand("", "manufacture set complete status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("已设置制作完成状态，继续测试capabilties中... \r\n详细：{0} \r\n", strRet));
goto Capability;
}
#endregion
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("capabilties测试：PASS\r\n");
//E-fuse测试
tool = new ThirdPartyTool()
{
ToolDirectory = "RFToolCli",
Cmd = string.Format("RfSettingsTool check --expected ../bin/{0}", EfuseBin)
};
//strRet = cmdProcess.ExeCommand(tool);//"azsphere device wifi show-status"
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//python
//tool.Cmd = "python RunHeaderTest.py ";//reset_system
//tool.ToolDirectory = "PC";
//strRet = cmdProcess.ExeCommand(tool, "");
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//E-fuse具体测试内容
frmMain.DisplayLog("e-fuse测试中...\r\n");
strRet = cmdProcess.ExeCommand(tool, "");
string hasReadFlag = "Comparing configurations.";
string startFlag = "Reading configuration data from device.";
string erroInfo = StringHelp.SubCentre(strRet, startFlag, "\r\n\r\n");
if (!strRet.Contains(hasReadFlag))
{
frmMain.DisplayLog(string.Format("E-fuse测试：命令失败 \r\n详细：{0} \r\n", erroInfo));
break;
}
strRet = StringHelp.SubCentre(strRet, hasReadFlag, "\r\n\r\n");
frmMain.DisplayLog(strRet + "\r\n");
if (strRet.Contains("ERROR") || strRet.Contains("异常"))
{
frmMain.DisplayLog("E-fuse测试结果： FAIL \r\n");
break;
}
frmMain.DisplayLog("E-fuse测试：PASS\r\n");
ret = 0;
//cd RFToolCli
//List<string> listValue = readWriteIdHandle.ReadId();
//if (listValue.Count <= 3)
//{
// break;
//}
////多组：1,1,01,01,,,40,0*61
//int sum = 0;
//string[] arryData;
//try
//{
// foreach (string strData in listValue)
// {
// arryData = strData.Split(',');
// 应滤除其他可视卫星
// int cn0Value = int.Parse(arryData[6]);
// sum += cn0Value;
// }
//}
//catch (Exception ex)
//{
// frmMain.DisplayLog(string.Format("数据解析错误：{0}\r\n", ex.Message));
// break;
//}
//int argVale = sum / listValue.Count;
//frmMain.DisplayLog(string.Format("获取C/N0值：{0}\r\n", argVale));
//if (argVale < StandardCN01)
//{
// frmMain.DisplayLog(string.Format("C/N0值：{0},小于设定范围{1} FAIL\r\n", argVale, StandardCN01));
// break;
//}
//frmMain.DisplayLog(string.Format("C/N0值：{0}，大于设定范围{1} PASS\r\n", argVale,StandardCN01));
//ret = 0;
////从芯片获取eid
////eidRead = "081603FFFFF35293" + eidlast.ToString("X").PadLeft(4,'0');
//eidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.EidRead);
//pattern = @"[0-9A-Z]{20}";
//if (string.IsNullOrEmpty(eidRead) || !Regex.IsMatch(eidRead, pattern))
//{
// frmMain.DisplayLog("EID读取失败\r\n");
// break;
//}
//frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
//frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
} while (false);
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
return(ret);
}
private int TestTaskFlow()
{
int ret = -1;
try
{
#region
//离线查重MAC
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
int retCheck = excel.SearchImei(txtMac.Text);
if (retCheck != 0)
{
DisplayLog(string.Format("MAC查重: {0} 重复 FAIL\r\n", txtMac.Text));
//return ret;
//stopWatcher1.Stop();
return(retCheck);
}
else
{
DisplayLog(string.Format("MAC查重: {0} 本机查重 PASS\r\n", txtMac.Text));
}
}
//分配SN
JiaHao.ExcelHelp.ExcelHelper snExcel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance(true);
string sn = snExcel.GetSn();//读最后一行
if (string.IsNullOrEmpty(sn))
{
DisplayLog(string.Format("分配SN: MAC:{0}分配SN失败 FAIL\r\n", txtMac.Text));
ret = -1;
return(ret);
}
DisplayLog(string.Format("分配SN: {0}成功 PASS\r\n", sn));
SetText(EnumControlWidget.txtSn.ToString(), sn, false);
//txtSn.Text = sn;
//txtSn.Refresh();
string strTimeNow = DateTime.Now.ToString("yyyyMMdd_HHmmss");
string strBinFilePath = strBinPath + txtSn.Text.ToUpper() + "_" + strTimeNow + ".bin";
FileStream fs = new FileStream(strBinFilePath, FileMode.Create);//@"C:\Users\ZJH\Desktop\test2.bin"
BinaryWriter bw = new BinaryWriter(fs);
//byte[] byteArray = StringToHex(textSN.Text);
//
byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(txtSn.Text);
for (int i = 0; i < byteArray.Length; i++)
{
bw.Write((byte)byteArray[i]);
}
bw.Close();
fs.Close();
StringBuilder SN = new StringBuilder(256);
string path;
IntPtr ptrTestSoftFormMain = FindWindow(espApplicationPath);
IntPtr ptrChild1 = Win32API.FindWindowEx(ptrTestSoftFormMain, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_1 = Win32API.FindWindowEx(ptrChild1, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_2 = Win32API.FindWindowEx(ptrChild1, ptrChild1_1, null, null);//
Win32API.SendMessage(ptrChild1_2, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S = Win32API.FindWindowEx(ptrChild1, ptrChild1_2, null, null); //
IntPtr ptrChild1_3S_1 = Win32API.FindWindowEx(ptrChild1_3S, IntPtr.Zero, null, null); //
IntPtr ptrChild1_3S_1_1 = Win32API.FindWindowEx(ptrChild1_3S_1, IntPtr.Zero, null, null); //
IntPtr ptrChild1_3S_1_1_1 = Win32API.FindWindowEx(ptrChild1_3S_1_1, IntPtr.Zero, null, null); //
IntPtr ptrChild3S_1_1_1_1text = Win32API.FindWindowEx(ptrChild1_3S_1_1_1, IntPtr.Zero, null, null); //
if (ptrChild3S_1_1_1_1text.Equals(IntPtr.Zero))
{
DisplayLog("烧录软件检查: 无法抓取到烧录软件路径栏 Edit FAIL\r\n");
return(ret);
}
Win32API.SendMessage(ptrChild3S_1_1_1_1text, Win32API.WM_SETTEXT, 0, strBinFilePath);
//抓取Button
IntPtr ptrChild1_3S_3 = Win32API.FindWindowEx(ptrChild1_3S, IntPtr.Zero, null, "ESP FLASH DOWNLOAD TOOL V0.9.7");//
Win32API.SendMessage(ptrChild1_3S_3, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1 = Win32API.FindWindowEx(ptrChild1_3S_3, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_3S_3_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1_1 = Win32API.FindWindowEx(ptrChild1_3S_3_1, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_3S_3_1_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1_1_5start = Win32API.FindWindowEx(ptrChild1_3S_3_1_1, IntPtr.Zero, null, "START");//
Win32API.SendMessage(ptrChild1_3S_3_1_1_5start, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
if (ptrChild1_3S_3_1_1_5start.Equals(IntPtr.Zero))
{
//MessageBox.Show("未抓取到START按键");
DisplayLog("烧录软件检查: 无法抓取到START按键 FAIL\r\n");
return(ret);
}
if (CheckSn == 1)
{
DisplayLog(string.Format("等待{0}s ....,请上电进入下载模式 进行查询SN\r\n", WaitintTime / 1000));
//扫码等待5s后，查询SN
Thread.Sleep(WaitintTime);
#region 查询产品是否有SN
// 读取SN生产bin文件
string strCmdReturn1;
DisplayLog("开始读取芯片0xc1000地址...\r\n");
int retCmd1 = cmdProcess.ExeCommand(ReadToolFolderName, ReadToolAppName, ComPort, out strCmdReturn1);
//使用工具读取addr并生成bin成功
if (retCmd1 != 0)
{
Process[] processes = Process.GetProcesses(); //创建并实例化一个操作进程的类：Process
foreach (var item in processes)
{
if (item.ProcessName == "read_bin_addr")
{
item.Close();
//item.Kill();
break;
}
}
DisplayLog("SN查询:读取地址失败 FAIL，提示:超过等待时间，设备需3次进入下载模式\r\n");
return(retCmd1);
//goto END;//END 处理收尾:显示烧写结果,清空
}
DisplayLog("读取芯片0xc1000地址生成bin成功\r\n");
DisplayLog("开始读取bin中的SN...\r\n");
//获取bin文件路径
int po;
string idKeySubstr1 = "save data to : ";
if ((po = strCmdReturn1.IndexOf(idKeySubstr1)) >= 0)
{
string createdBinPath = strCmdReturn1.Substring(po + idKeySubstr1.Length);
//读取bin文件,前7个字节
createdBinPath = createdBinPath.Replace("./", "./" + ReadToolFolderName + "/");
byte[] readHex = ReadFile(createdBinPath);
//将读取与写入对比，一致则写入成功
string strRead = Encoding.UTF8.GetString(readHex);
//if (strRead != "")
//{
//}
DisplayLog("读取bin中的SN成功\r\n");
for (int i = 0; i < readHex.Length; i++)
{
if (readHex[i] != 0xFF)
{
hasSn = true;
}
}
if (hasSn)
{
hasSn = false;
DisplayLog("SN查询:" + string.Format("产品中已有SN:{0} FAIL\r\n", strRead));
return(ret);
}
DisplayLog("SN查询:" + "产品中未写过SN PASS\r\n");
}
#endregion
}
DisplayLog(string.Format("等待{0}s ....,请上电进入下载模式,进行下载\r\n", WaitintTime / 1000));
//扫码等待5s后点击Start按键
Thread.Sleep(WaitintTime);
//点击START按键
Win32API.SendMessage(ptrChild1_3S_3_1_1_5start, Win32API.BM_CLICK, 0, "0");
//需等烧录完成后，并按板子进入烧录模式，再启动读取软件，读取数据
DisplayLog(string.Format("等待{0}s ....,请在下载完成后再次上电进入下载模式，进行校验\r\n", WaitintTime / 1000));
Thread.Sleep(WaitintTime);
// 读取SN生产bin文件
#region
DisplayLog("开始读取芯片0xc1000地址...\r\n");
string strCmdReturn;
int retCmd = cmdProcess.ExeCommand(ReadToolFolderName, ReadToolAppName, ComPort, out strCmdReturn);
//使用工具读取addr并生成bin成功
if (retCmd != 0)
{
Process[] processes = Process.GetProcesses(); //创建并实例化一个操作进程的类：Process
foreach (var item in processes)
{
if (item.ProcessName == "read_bin_addr")
{
item.Close();
//item.Kill();
break;
}
}
DisplayLog("SN校验:校验失败，提示:超过等待时间，设备需2次进入下载模式\r\n");
return(retCmd);
//goto END;//END 处理收尾:显示烧写结果,清空
}
DisplayLog("读取芯片0xc1000地址生成bin成功\r\n");
DisplayLog("开始读取bin中的SN...\r\n");
#endregion
//获取bin文件路径
int positon;
string idKeySubstr = "save data to : ";
if ((positon = strCmdReturn.IndexOf(idKeySubstr)) >= 0)
{
string createdBinPath = strCmdReturn.Substring(positon + idKeySubstr.Length);
//读取bin文件,前7个字节
createdBinPath = createdBinPath.Replace("./", "./" + ReadToolFolderName + "/");
byte[] readHex = ReadFile(createdBinPath);
//将读取与写入对比，一致则写入成功
for (int i = 0; i < readHex.Length; i++)
{
if (readHex[i] != byteArray[i])
{
isDiff = true;
}
}
DisplayLog("读取bin中的SN成功\r\n");
if (isDiff)
{
isDiff = false;
DisplayLog("SN校验:" + txtSn.Text + " 写入错误,写入失败 FAIL\r\n");
return(ret);
}
DisplayLog("SN校验:" + txtSn.Text + " 写入正确 PASS\r\n");
#region 离线 记录到Excel
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
excel.ExportExcelOneByOne(new JiaHao.ExcelHelp.ExcelHelper.TrayInfoInExcel()
{
num = 1,
mac = txtMac.Text,
sn = txtSn.Text,
cuatomerName = "厦门阳光"
});
//Log添加 写入Excel成功
DisplayLog("写入过站记录表: MAC:" + txtMac.Text + " SN:" + txtSn.Text + " PASS\r\n");
//删除最后一行SN
ret = snExcel.DeleteLastRow();
if (ret != 0)
{
DisplayLog(string.Format("删除SN: MAC({0})删除最后一行SN失败 FAIL\r\n", txtMac.Text));
return(ret);
}
else
{
DisplayLog(string.Format("删除SN: MAC({0})删除最后一行SN成功 PASS\r\n", txtMac.Text));
}
}
#endregion
ret = 0;
}
#endregion
}
catch (Exception ex)
{
MessageBox.Show(txtSn.Text + ex.Message);
//txtSn.Text = "";
return(ret);
}
return(ret);
}