//校准方法，使用Vertex相位自校准
private List <SignalPath> GetAllSignalPathData(CalBoxToMatrix calBoxToMatrix, CalBoxToVertex calBoxToVertex, IVectorNetworkAnalyzer VNA, Matrix matrix, Vertex[] vertex)
{
var signalPaths = new List <SignalPath>();
//FrmOutput.GetFrmOutput().OutputLog = "Start The Calibration.";
//SingletonFactory<FrmOutput>.CreateInstance().OutputLog = "Start The Calibration.";
VNA.SetMarkerActive();
VNA.SetMarkerX(matrix.Frequency * 1000000);
//关闭Vertex所有通道，后面用哪个打开哪个
foreach (var v in vertex)
{
v.CloseAllChannel(v.APortNum, v.BPortNum);
}
//for (int c = 1; c <= vertex.BPortNum; c++)
//{
for (int b = 1; b <= matrix.BPortConnectNum; b++)
{
//下行
//var groupSignalPaths = new List<SignalPath>();
var vertexID = (b - 1) / AppConfigInfo.VertexAConnectNum;
var inPortID = (b - 1) % AppConfigInfo.VertexAConnectNum + 1;
var outPortID = 1;
vertex[vertexID].OpenChannel(inPortID, outPortID, UpDown.DOWN);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}台Vertex响应。打开通道{1}{2}，方向{3}。", vertexID, inPortID, outPortID, UpDown.DOWN);
}
for (int a = 1; a <= matrix.APortConnectNum; a++)
{
var calBoxAPortID = a;
var calBoxBPortID = ((b - 1) / AppConfigInfo.VertexAConnectNum) * AppConfigInfo.VertexBConnectNum + 1;
calBoxToMatrix.Set64B16Switch(calBoxAPortID, calBoxBPortID, 1, 1);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("衰减校准阶段切开关 {0}{1} OK。", calBoxAPortID, calBoxBPortID);
}
//calBoxToMatrix.SetSwitch(a);
//calBoxToVertex.SetSwitch(c);
//vNA.SetMarkerActive();
//vNA.SetMarkerX(ViewConfigInfo.Frequency * 1000000);
var signalPath = new SignalPath(matrix, calBoxToMatrix.CalBoxData)
{
APortID = a,
BPortID = b,
CPortID = 1,
Attenuation = VNA.GetMarkerY(AppConfigInfo.AttMarkPoint),
//Phase = vNA.GetMarkerY(int.Parse(ConfigurationManager.AppSettings["Pha Mark Point"]))
};
//signalPath.GetOffsetAttToMatrix();
//signalPath.GetOffsetAttToVertex(UpDown.UP);
//signalPath.GetOffsetPhaToMatrix();
//不需要求Vertex补偿相位
//signalPath.GetOffsetPhaToVertex(UpDown.UP);
signalPaths.Add(signalPath);
//bgw.ReportProgress((1000 / 8192) * a * b * c);
}
vertex[vertexID].CloseChannel(inPortID, outPortID, UpDown.DOWN);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}台Vertex响应。关闭通道{1}{2}，方向{3}。", vertexID, inPortID, outPortID, UpDown.DOWN);
}
//下行
//vertex.OpenChannel(b, c, UpDown.DOWN);
//foreach (var signalPath in groupSignalPaths)
//{
// vNA.SetMarkerActive();
// vNA.SetMarkerX((long.Parse(CalConfigInfo.Frequency) * 1000000));
// //signalPath.Attenuation = Math.Abs(vNA.GetMarkerY(int.Parse(ConfigurationManager.AppSettings["Att Mark Point"])));
// signalPath.Phase = r.Next(-360, 360);//vNA.GetMarkerY(int.Parse(ConfigurationManager.AppSettings["Pha Mark Point"]));
// signalPath.GetOffsetPhaToVertex(UpDown.DOWN);
//}
//vertex.CloseChannel(b, c, UpDown.DOWN);
//signalPaths.AddRange(groupSignalPaths);
}
//}
//};
//FrmProgressBar frmProgressBar = new FrmProgressBar("Connecting... ", ref bgw);
//frmProgressBar.ShowDialog();
return(signalPaths);
}
private void Calibrate()
{
try
{
Thread getCalBoxDatasThread = new Thread((calBoxToMatrix) =>
{
(calBoxToMatrix as CalBoxToMatrix).GetCalBoxData();
})
{
CurrentCulture = System.Globalization.CultureInfo.InvariantCulture,
Name = "子线程：获取校准盒子数据。",
IsBackground = true
};
//获取校准盒子数据
getCalBoxDatasThread.Start(CalBoxToMatrix);
Thread resetMatrixThread = new Thread((matrix) =>
{
var m = matrix as Matrix;
m.ResetAttAndPha();
})
{
CurrentCulture = System.Globalization.CultureInfo.InvariantCulture,
Name = "子线程：设置MCS衰减相位归零。",
IsBackground = true
};
//相位衰减置零
resetMatrixThread.Start(Matrix);
//等待子线程完成任务
getCalBoxDatasThread.Join();
resetMatrixThread.Join();
int attCalFre = AppConfigInfo.AttCalFre;
int phaCalFre = AppConfigInfo.PhaCalFre;
int maxCalCount = attCalFre > phaCalFre ? attCalFre : phaCalFre;
for (int i = 1; i <= maxCalCount; i++)
{
if (i <= attCalFre)
{
//开始获取通道衰减
SignalPathList = GetAllSignalPathData(CalBoxToMatrix, CalBoxToVertex, VNA, Matrix, VertexArray);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("通道总数量为{0}。Vertex台数为{1}。", SignalPathList.Count, VertexArray.Length);
}
//找到衰减最小值
SignalPath.AttStandard = SignalPathList.Select(s => s.Attenuation).Min();
//int indexMin = signalPaths.Select(s => s.Attenuation).ToList().IndexOf(SignalPath.AttStandard);
//得到衰减补偿值
//matrix.Channels = new List<Channel>();
//foreach (var signalPath in signalPaths)
//{
// //signalPath.GetOffsetAttToMatrix();
// matrix.Channels.Add(signalPath.ChannelToMatrix);
//}
Thread setMatrixAttThread = new Thread((matrix) =>
{
var m = matrix as Matrix;
m.SetAtt(SignalPathList.Select(s => s.ChannelToMatrix).ToList());
})
{
CurrentCulture = System.Globalization.CultureInfo.InvariantCulture,
Name = "子线程：设置MCS补偿衰减。",
IsBackground = true
};
setMatrixAttThread.Start(Matrix);
setMatrixAttThread.Join();
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}次衰减校准完成。", i);
}
}
if (i <= phaCalFre)
{
//matrix.Channels = new List<Channel>();
//取相位
for (int b = 1; b <= Matrix.BPortConnectNum; b++)
{
//下行
//vertex.OpenChannel(b, 1, UpDown.DOWN);
//vertexs[b / AppConfigInfo.VertexAConnectNum].OpenChannel(b % AppConfigInfo.VertexAConnectNum, 1, UpDown.DOWN);
var vertexID = (b - 1) / AppConfigInfo.VertexAConnectNum;
var inPortID = (b - 1) % AppConfigInfo.VertexAConnectNum + 1;
var outPortID = 1;
VertexArray[vertexID].OpenChannel(inPortID, outPortID, UpDown.DOWN);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}台Vertex响应。打开通道{1}{2}，方向{3}。", vertexID, inPortID, outPortID, UpDown.DOWN);
}
for (int a = 1; a <= Matrix.APortConnectNum; a++)
{
var calBoxAPortID = a;
var calBoxBPortID = ((b - 1) / AppConfigInfo.VertexAConnectNum) * AppConfigInfo.VertexBConnectNum + 1;
CalBoxToMatrix.Set64B16Switch(calBoxAPortID, calBoxBPortID, 1, 1);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("相位校准阶段切开关 {0}{1} OK。", calBoxAPortID, calBoxBPortID);
}
SignalPathList.Find(s => s.Index.Equals($"{a}:{b}:1")).Phase = VNA.GetMarkerY(AppConfigInfo.PhaMarkPoint);
}
//vertex.CloseChannel(b, 1, UpDown.DOWN);
//vertexs[b / AppConfigInfo.VertexAConnectNum].CloseChannel(b % AppConfigInfo.VertexAConnectNum, 1, UpDown.DOWN);
VertexArray[vertexID].CloseChannel(inPortID, outPortID, UpDown.DOWN);
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}台Vertex响应。关闭通道{1}{2}，方向{3}。", vertexID, inPortID, outPortID, UpDown.DOWN);
}
}
Thread setMatrixPhaThread = new Thread((matrix) =>
{
var m = matrix as Matrix;
m.SetPha(SignalPathList.Select(s => s.ChannelToMatrix).ToList());
})
{
CurrentCulture = System.Globalization.CultureInfo.InvariantCulture,
Name = "子线程：设置MCS补偿相位。",
IsBackground = true,
};
setMatrixPhaThread.Start(Matrix);
setMatrixPhaThread.Join();
if (Log.log.IsInfoEnabled)
{
Log.log.InfoFormat("第{0}次相位校准完成。", i);
}
}
}
MessageBox.Show("MCS Calibrate Successfully! Please Start Vertex Self Calibrate!");
}
catch (Exception ex)
{
Log.log.ErrorFormat("{0}", ex);
MessageBox.Show(ex.ToString());
}
}