public static List <DBText> Command(string Text, double Size, TextPosition Position)
{
var Return = new List <DBText>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
var acSSet = Utils.Select.MultiObjs();
var acPolys = Utils.Get.GetEntity <Polyline>(acSSet);
acPolys.ForEach(acPoly =>
{
var CP = Utils.PointUtil.GetCenterP(acPoly);
var Vec = Utils.Vector.GetByLong(acPoly);
var Ang = Utils.Vector.To2D(Vec).Angle;
if (Ang > Math.PI / 2 && Ang <= Math.PI / 2 * 3)
{
Ang += Math.PI;
}
Return.Add(CADUtil.CreateText(CP, Size, Ang, Position, Text));
});
AC.Editor.PostCommandPrompt();
}
return(Return);
}
public static ObjectId Create(LineSegment3d L, double H, ObjectId DimStyleId, ObjectId LayerId)
{
ObjectId Return = ObjectId.Null;
#region T
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
var BT = T.GetObject(AC.DB.BlockTableId, OpenMode.ForRead) as BlockTable;
var BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
var V = L.Direction;
var cross_V = V.CrossProduct(Vector3d.ZAxis);
var CP = CADUtil.GetCenterPoint3d(L); // center point
var DP = CADUtil.MoveP(CP, cross_V, H); // dimension point
var acDim = new AlignedDimension(L.StartPoint, L.EndPoint, DP, string.Empty, DimStyleId);
acDim.DimensionStyle = DimStyleId;
acDim.LayerId = LayerId;
BTR.AppendEntity(acDim);
T.AddNewlyCreatedDBObject(acDim, true);
Return = acDim.Id;
T.Commit();
}
#endregion
return(Return);
}
/// <summary>
/// 폴리라인 중심에 면적 입력하기(복수 선택)
/// </summary>
/// <param name="TextSize">문자 크기</param>
/// <param name="n">반올림 자리수</param>
public void CreateMultiObj(double TextSize = 100, int n = 2)
{
#region 복수 객체 선택
var acSSet = Utils.Select.MultiObjs();
if (acSSet == null)
{
return;
}
var acEnts = Utils.Get.Entity(acSSet, typeof(Polyline));
#endregion
#region 면적 입력
acEnts.ForEach(acEnt =>
{
var acPolyline = acEnt as Polyline;
var p = Utils.PointUtil.GetCenterP(acPolyline);
var PL_Area = acPolyline.Area; // mm²
var Area = Math.Round(PL_Area / 100000, n); // m²
var acText = CADUtil.CreateText(p, TextSize, Area.ToString() + "m²", ColorIndex.Green);
acDocEd.WriteMessage(" 폴리라인에 면적 [" + acText.TextString + "]이 입력되었습니다. \n");
});
#endregion
acDocEd.PostCommandPrompt();
}
// ListBox > 더블클릭
void Lst_L_DoubleClick(object sender, EventArgs e)
{
var LBC = sender as DevExpress.XtraEditors.ListBoxControl;
string LayerName = LBC.SelectedItem as string;
#region 필터
TypedValue[] tvs = new TypedValue[]
{
new TypedValue(Convert.ToInt32(DxfCode.Operator), "<or"),
new TypedValue(Convert.ToInt32(DxfCode.LayerName), LayerName),
new TypedValue(Convert.ToInt32(DxfCode.Operator), "or>"),
};
var selectFilter = new SelectionFilter(tvs);
#endregion
var PSR = AC.Editor.SelectAll(selectFilter);
if (PSR.Status == PromptStatus.OK)
{
CADUtil.SetSelected(PSR);
AC.Editor.WriteMessage("\n'" + LayerName + "' 레이어 객체" + PSR.Value.Count.ToString() + "개 선택. \n");
}
else
{
AC.Editor.WriteMessage("\n'" + LayerName + "' 레이어 객체가 없습니다. \n");
}
Autodesk.AutoCAD.Internal.Utils.SetFocusToDwgView();
}
public static List <ObjectId> Create(Polyline acPoly, double H, bool updown, ObjectId DimStyleId, ObjectId LayerId)
{
List <ObjectId> Return = new List <ObjectId>();
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
var BT = T.GetObject(AC.DB.BlockTableId, OpenMode.ForRead) as BlockTable;
var BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
for (int i = 0; i < acPoly.NumberOfVertices; i++)
{
try
{
var L = acPoly.GetLineSegmentAt(i);
var V = L.Direction;
var cross_V = V.CrossProduct(Vector3d.ZAxis);
var MP = Utils.PointUtil.GetCenterP(L); // Middle point
#region 폴리라인 내부에 입력되어야하는 경우
// updown이 true일 경우 폴리라인 외부, false인 경우 폴리라인 내부
if (!updown)
{
var CP = Utils.PointUtil.GetCenterP(acPoly); // Center point
var p = Utils.PointUtil.Move(MP, cross_V);
var b = Utils.PointUtil.IsInsidePolyline(acPoly, p, false);
if (!b)
{
cross_V = -cross_V;
}
}
#endregion
var DP = CADUtil.MoveP(MP, cross_V, H); // dimension point
var acDim = new AlignedDimension(L.StartPoint, L.EndPoint, DP, string.Empty, DimStyleId);
Return.Add(acDim.Id);
acDim.DimensionStyle = DimStyleId;
acDim.LayerId = LayerId;
BTR.AppendEntity(acDim);
T.AddNewlyCreatedDBObject(acDim, true);
}
catch
{
}
}
T.Commit();
}
return(Return);
}
void ResetListBox()
{
ReadData();
var AllLayers = CADUtil.GetAllLayerNames();
var L1 = Properties.Settings.Default.layers01.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L2 = Properties.Settings.Default.layers02.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L3 = Properties.Settings.Default.layers03.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L4 = Properties.Settings.Default.layers04.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L5 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L6 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L7 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L8 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L9 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L10 = Properties.Settings.Default.layers05.Cast <object>().Where(a => AllLayers.Contains(a.ToString()));
var L = (from a in AllLayers
where !L1.Contains(a)
where !L2.Contains(a)
where !L3.Contains(a)
where !L4.Contains(a)
where !L5.Contains(a)
where !L6.Contains(a)
where !L7.Contains(a)
where !L8.Contains(a)
where !L9.Contains(a)
where !L10.Contains(a)
let b = a as object
orderby b
select b);
lst_L.Items.Clear();
lst_L1.Items.Clear();
lst_L2.Items.Clear();
lst_L3.Items.Clear();
lst_L4.Items.Clear();
lst_L5.Items.Clear();
lst_L6.Items.Clear();
lst_L7.Items.Clear();
lst_L8.Items.Clear();
lst_L9.Items.Clear();
lst_L10.Items.Clear();
lst_L.Items.AddRange(L.ToArray());
lst_L1.Items.AddRange(L1.ToArray());
lst_L2.Items.AddRange(L2.ToArray());
lst_L3.Items.AddRange(L3.ToArray());
lst_L4.Items.AddRange(L4.ToArray());
lst_L5.Items.AddRange(L5.ToArray());
lst_L6.Items.AddRange(L6.ToArray());
lst_L7.Items.AddRange(L7.ToArray());
lst_L8.Items.AddRange(L8.ToArray());
lst_L9.Items.AddRange(L9.ToArray());
lst_L10.Items.AddRange(L10.ToArray());
}
// 버튼 > LayerISO
void Btn_LayerISO_Click(object sender, EventArgs e)
{
ReadData();
CADUtil.TurnOffAllLayers();
//CAD.TurnOnLayer(cbo_Layer1.Text);
//CAD.TurnOnLayer(cbo_Layer2.Text);
//CAD.TurnOnLayer(cbo_Layer3.Text);
//CAD.TurnOnLayer(cbo_Layer4.Text);
}
private void Sb_Refresh_Click(object sender, EventArgs e)
{
var R = GC.DataSource as List <Room>;
R.ForEach(r =>
{
if (r.Handle == new Handle())
{
return;
}
var handle = r.Handle;
// Children 제거
Utils.Get.ObjectIDs(r.ChildrenH).Where(id => !id.IsErased).ToList().ForEach(id => CADUtil.Erase(id));
r.Children.Clear();
r.ChildrenH.Clear();
var ObjId = new ObjectId();
AC.DB.TryGetObjectId(handle, out ObjId);
if (ObjId.IsErased)
{
r.IsLink = false;
r.Area = 0;
return;
}
var acPoly = Utils.Get.GetObject <Polyline>(ObjId);
if (acPoly == null)
{
return;
}
r.Area = Math.Round(acPoly.Area / 1000000, 4);
var cen = Utils.PointUtil.GetCenterP(acPoly);
var pos1 = new Point3d(cen.X, cen.Y + 150, cen.Z);
var pos2 = new Point3d(cen.X, cen.Y - 150, cen.Z);
// 이름 적기
r.ChildrenH.Add(CADUtil.CreateText(pos1, 200, r.Name, ColorIndex.Red).Handle);
// 길이 적기
var objIds = Utils.DIMUtil.ReCreate(acPoly, DB.DimLayerId, DB.DimStyleId);
r.ChildrenH.AddRange(Utils.Get.ObjHandles(objIds));
// 면적 적기
r.ChildrenH.Add(CADUtil.CreateText(pos2, 200, Math.Round(r.Area, 4).ToString(), ColorIndex.Red).Handle);
});
GV.RefreshData();
DB.ROOM = GC.DataSource as List <Room>;
}
/// <summary>
/// 폴리라인 중심에 면적 입력하기(단일 선택)
/// </summary>
public void Create_PolylineAreaText()
{
bool B = true;
while (B)
{
var acSSet = SelectAPolyline();
if (acSSet == null)
{
B = false;
return;
}
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
#region 폴리라인 선택
var Lines = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
select acLine;
if (!Lines.Any())
{
return;
}
var acPolyline = Lines.ToList().First();
#endregion
#region 면적 입력
var p = acPolyline.NumberOfVertices == 4 ? GetCenterPoint(acPolyline) : GetVisualCenterPoint(acPolyline);
var PL_Area = acPolyline.Area;
var Area = Math.Round(PL_Area / 100000, 2);
var acText = CADUtil.CreateText(p, 100, Area.ToString() + "m²");
acText.Color = ColorIndex.Green;
AC.Editor.WriteMessage(" 폴리라인에 면적 [" + acText.TextString + "]이 입력되었습니다. \n");
#endregion
T.Commit();
}
}
AC.Editor.PostCommandPrompt();
}
void RefreshRoom(Handle handle)
{
var R = GC.DataSource as List <Room>;
var A = R.Where(a => a.Handle.Equals(handle));
if (!A.Any())
{
return;
}
var r = A.First();
// Children 제거
CADUtil.Erases(Utils.Get.ObjectIDs(r.ChildrenH));
r.Children.Clear();
r.ChildrenH.Clear();
var ObjId = new ObjectId();
AC.DB.TryGetObjectId(handle, out ObjId);
var acPoly = Utils.Get.GetObject <Polyline>(ObjId);
if (acPoly == null)
{
return;
}
r.Area = Math.Round(acPoly.Area / 1000000, 4);
var cen = Utils.PointUtil.GetCenterP(acPoly);
var pos1 = new Point3d(cen.X, cen.Y + 150, cen.Z);
var pos2 = new Point3d(cen.X, cen.Y - 150, cen.Z);
// 이름 적기
r.ChildrenH.Add(CADUtil.CreateText(pos1, 200, r.Name, ColorIndex.Red).Handle);
// 길이 적기
var objIds = Utils.DIMUtil.ReCreate(acPoly, DB.DimLayerId, DB.DimStyleId);
r.ChildrenH.AddRange(Utils.Get.ObjHandles(objIds));
// 면적 적기
r.ChildrenH.Add(CADUtil.CreateText(pos2, 200, Math.Round(r.Area, 4).ToString(), ColorIndex.Red).Handle);
GV.RefreshData();
DB.ROOM = GC.DataSource as List <Room>;
}
public static Vector3d GetVector(AlignedDimension dim)
{
var p1 = dim.XLine1Point;
var p2 = dim.XLine2Point;
var ls = new LineSegment3d(p1, p2);
var tp = dim.TextPosition;
var Vec = Utils.Vector.Get(p1, p2);
var rotatedVec = Vec.RotateBy(Math.PI / 2, Vector3d.ZAxis);
var ip = CADUtil.GetIntersectedPoint(tp, rotatedVec, ls);
return(Utils.Vector.Get(ip, tp));
}
/// <summary>
/// 폴리라인 중심에 면적 입력하기(복수 선택)
/// </summary>
public void Create_PolylineAreaTexts()
{
var acSSet = SelectPolylines();
if (acSSet == null)
{
return;
}
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
#region 폴리라인 선택
var Lines = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
where acLine.Closed
select acLine;
if (!Lines.Any())
{
return;
}
#endregion
int n = 0;
Lines.ToList().ForEach(acPolyline =>
{
#region 면적 입력
var p = acPolyline.NumberOfVertices == 4 ? GetCenterPoint(acPolyline) : GetVisualCenterPoint(acPolyline);
var PL_Area = acPolyline.Area;
var Area = Math.Round(PL_Area / 100000, 2);
var acText = CADUtil.CreateText(p, 100, Area.ToString() + "m²");
acText.Color = ColorIndex.Green;
n++;
#endregion
});
T.Commit();
AC.Editor.WriteMessage("\n" + n.ToString() + "개의 폴리라인에 면적이 입력되었습니다.");
AC.Editor.PostCommandPrompt();
}
}
private void CreateRectangle(Line L1, List <Line> Ls)
{
var C2 = Ls.First();
var sp1 = L1.StartPoint;
var ep1 = L1.EndPoint;
var Ps1 = new List <Point3d> {
sp1, ep1
};
var sp2 = C2.StartPoint;
var ep2 = C2.EndPoint;
var Ps2 = new List <Point3d> {
sp2, ep2
};
var Ps = from p1 in Ps1
from p2 in Ps2
let d = p1.DistanceTo(p2)
orderby d descending
select new List <Point3d> {
p1, p2
};
if (Ps.Any())
{
var Points = Ps.First();
var P1 = new Point3d(Points[0].X, Points[0].Y, 0);
var P2 = new Point3d(Points[1].X, Points[1].Y, 0);
var Vec1 = CADUtil.GetVector(L1);
var Vec2 = CADUtil.GetVector(P1, P2);
if (Vec1.GetAngleTo(Vec2) > Math.PI / 2)
{
Vec1 = -Vec1;
}
double Ang = Math.Abs(Vec1.GetAngleTo(Vec2));
var acPolyline = CADUtil.CreateRectangle(P1, P2, Vec1, Ang);
//MessageBox.Show(P1.ToString() + "\n" + P2.ToString() + "\n" + Vec1.ToString() + "\n" + Ang.ToString());
//MessageBox.Show(acPolyline.StartPoint.ToString() + "\n" + acPolyline.EndPoint.ToString());
}
}
void RefreshRoom(ObjectId id)
{
var R = GC.DataSource as List <Room>;
var A = R.Where(x => x.Id.Equals(id));
if (!A.Any())
{
return;
}
var r = A.First();
//MessageBox.Show("테스트1");
r.Children.ForEach(cid => CADUtil.Erase(cid));
//MessageBox.Show("테스트2");
r.Children.Clear();
var acPoly = Utils.Get.GetObject <Polyline>(id);
if (acPoly == null)
{
return;
}
r.Area = Math.Round(acPoly.Area / 1000000, 4);
var cen = Utils.PointUtil.GetCenterP(acPoly);
var pos1 = new Point3d(cen.X, cen.Y + 150, cen.Z);
var pos2 = new Point3d(cen.X, cen.Y - 150, cen.Z);
//var acDimLayerId = Utils.Layer.Create("HDC_Dimension", ColorIndex.Green); // 레이어 생성
//var acDimStyleId = Utils.DIMUtil.Create_HDC_DimensionStyle("HDC_Dim_Style"); // 치수 스타일 생성
// 이름 적기
r.Children.Add(CADUtil.CreateText(pos1, 200, r.Name).Id);
// 길이 적기
r.Children.AddRange(Utils.DIMUtil.ReCreate(acPoly, DB.DimLayerId, DB.DimStyleId));
// 면적 적기
//r.Children.Add(AC.Drawing.CreateText(pos2, Math.Round(r.Area, 4).ToString()));
GV.RefreshData();
DB.ROOM = GC.DataSource as List <Room>;
}
private void CreateRectangle(Curve2d C1, List <Curve2d> Cs)
{
var C2 = Cs.First();
var sp1 = C1.StartPoint;
var ep1 = C1.EndPoint;
var Ps1 = new List <Point2d> {
sp1, ep1
};
var sp2 = C2.StartPoint;
var ep2 = C2.EndPoint;
var Ps2 = new List <Point2d> {
sp2, ep2
};
var Ps = from p1 in Ps1
from p2 in Ps2
let d = p1.GetDistanceTo(p2)
orderby d descending
select new List <Point2d> {
p1, p2
};
if (Ps.Any())
{
var Points = Ps.First();
var Vec1 = CADUtil.GetVector(C1);
var Vec2 = CADUtil.GetVector(Points[0], Points[1]);
if (Vec1.GetAngleTo(Vec2) > Math.PI / 2)
{
Vec1 = -Vec1;
}
double Ang = Math.Abs(Vec1.GetAngleTo(Vec2));
var P1 = CADUtil.ToPoint3D(Points[0]);
var P2 = CADUtil.ToPoint3D(Points[1]);
CADUtil.CreateRectangle(P1, P2, Vec1, Ang);
}
}
public void CreateColumnPolyLine()
{
bool B = true;
while (B)
{
var Polylines = select.Objects <Polyline>();
if (Polylines == null)
{
B = false;
return;
}
#region 생성
using (DocumentLock DL = AC.Doc.LockDocument())
{
Polylines.ForEach(acPolyline =>
{
var Points = new List <Point3d>();
for (int i = 0; i < acPolyline.NumberOfVertices; i++)
{
Points.Add(acPolyline.GetPoint3dAt(i));
}
Points.Add(acPolyline.GetPoint3dAt(0));
var acNewPolyLine = CADUtil.CreateRectangle(Points);
});
}
#endregion
}
AC.Editor.WriteMessage("\n기둥 입력완료 ");
AC.Editor.PostCommandPrompt();
}
public void CreateKeyLine2()
{
var selectedPolyLines = new List <Polyline>();
var acPolylines = new List <Polyline>();
#region 폴리라인 선택
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
try
{
SelectionSet acSSet = SelectLines();
var Lines = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
select acLine;
if (!Lines.Any())
{
return;
}
selectedPolyLines.AddRange(Lines.ToArray());
}
catch (System.Exception ex)
{
AC.Editor.WriteMessage(Convert.ToString(ex));
}
}
#endregion
using (DocumentLock DL = AC.Doc.LockDocument())
{
#region 입력
selectedPolyLines.ForEach(pl =>
{
#region 폴리라인에서 커브 담기
var curves = new List <Curve3d>();
for (int i = 0; i < pl.NumberOfVertices; i++)
{
try
{
var l = pl.GetLineSegmentAt(i).Length;
if (l >= Min && l <= Max)
{
curves.Add(pl.GetLineSegmentAt(i));
}
}
catch (System.Exception)
{
}
}
#endregion
if (curves.Count == 2)
{
var cv1 = curves[0];
var cv2 = curves[1];
var p1 = CADUtil.GetCenterPoint3d(cv1);
var p2 = CADUtil.GetCenterPoint3d(cv2);
var vec = CADUtil.GetVector(p1, p2);
var X = (vec * extend).X;
var Y = (vec * extend).Y;
var sp = CADUtil.MoveP(p1, -X, -Y, 0);
var ep = CADUtil.MoveP(p2, X, Y, 0);
var acPolyline = CADUtil.CreatePolyline(sp, ep);
acPolylines.Add(acPolyline);
}
});
#endregion
#region 검토 & 연속된 선 연결
// 제거할 선들
var deletePolylines = new List <Polyline>();
acPolylines.ForEach(pl1 =>
{
var direction = pl1.GetLineSegmentAt(0).Direction;
direction = direction.X < 0 ? -direction : direction;
var Ang = Math.Round(Math.Atan2(direction.Y, direction.X) / Math.PI * 180) % 180;
var A = Math.Abs(Ang) == 90 || Ang == 0 ? 0 : Math.Tan(Ang / 180 * Math.PI);
//MessageBox.Show(Ang + "\n" + A.ToString());
// 같은 2차 그래프에 존재하는 선들
var parallelPolylines = from pl2 in acPolylines
where !deletePolylines.Contains(pl2)
let line1 = pl1.GetLineSegmentAt(0)
let line2 = pl2.GetLineSegmentAt(0)
where line1.IsParallelTo(line2, new Tolerance(1, 1))
//let b1 = line1.StartPoint.Y - A * line1.StartPoint.X
//let b2 = line2.StartPoint.Y - A * line2.StartPoint.X
//let sp1 = line1.StartPoint
//let sp2 = line2.StartPoint
//where (Ang == 0 && IsAlmostEqual(sp1.Y, sp2.Y)) ||
// (Math.Abs(Ang) == 90 && IsAlmostEqual(sp1.X, sp2.X)) ||
// (Ang != 0 && Math.Abs(Ang) != 90 && IsAlmostEqual(line1,line2))
where IsAlmostEqual(line1, line2)
select pl2;
if (parallelPolylines.Any())
{
var Ps = CADUtil.getFurPoints(parallelPolylines.ToList());
var acPolyline = CADUtil.CreatePolyline(Ps[0], Ps[1]);
deletePolylines.AddRange(parallelPolylines);
}
});
#endregion
#region 제거
using (OpenCloseTransaction T = AC.DB.TransactionManager.StartOpenCloseTransaction())
{
deletePolylines.ForEach(a =>
{
var entity = T.GetObject(a.Id, OpenMode.ForWrite) as Entity;
if (!entity.IsErased)
{
entity.Erase(true);
}
});
T.Commit();
}
#endregion
}
AC.Editor.WriteMessage("\n키라인 입력완료 ");
AC.Editor.PostCommandPrompt();
}
public void CreateBeamPolyLine()
{
bool B = true;
while (B)
{
var Lines = select.Objects <Line>();
if (Lines == null)
{
B = false;
return;
}
var usedLines = new List <Point3d>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
Lines.ForEach(acLine =>
{
try
{
var lines = from l in Lines.ToList()
where acLine != l
select l;
if (lines.Any())
{
#region 규칙 적용
var matchedLines = from a in lines
let A1 = Math.Abs(Math.Round(CADUtil.GetVector(acLine).Angle / Math.PI * 180)) % 180
let A2 = Math.Abs(Math.Round(CADUtil.GetVector(a).Angle / Math.PI * 180)) % 180
where Math.Abs(A1 - A2) < 5
//where CAD.GetVector(a).IsParallelTo(CAD.GetVector(acLine))
//|| CAD.GetVector(a).IsParallelTo(-CAD.GetVector(acLine))
let curve = acLine as Curve
let d = Math.Round(acLine.GetGeCurve().GetDistanceTo(CADUtil.GetCenterPoint3d(a)), 0)
where d >= Min && d <= Max
select a;
//MessageBox.Show(matchedLines.Count().ToString());
#endregion
#region 생성
if (matchedLines.Any())
{
bool B1 = true;
#region 중복 판별
matchedLines.ToList().ForEach(l1 =>
{
var cp1 = CADUtil.GetCenterPoint3d(l1);
usedLines.ForEach(cp2 =>
{
if (cp1.IsEqualTo(cp2))
{
B1 = false;
}
});
});
#endregion
if (B1)
{
CreateRectangle(acLine, matchedLines.ToList());
usedLines.Add(CADUtil.GetCenterPoint3d(acLine));
}
}
#endregion
}
}
catch { }
});
}
}
AC.Editor.WriteMessage("\n보 입력완료 ");
AC.Editor.PostCommandPrompt();
}
// 모든 레이어 켜기 / 끄기 / All Clear / Fitting
void LCG_Main_CustomButtonClick(object sender, DevExpress.XtraBars.Docking2010.BaseButtonEventArgs e)
{
ReadData();
switch (e.Button.Properties.Caption)
{
case "모든 레이어 켜기": CADUtil.TurnOnAllLayers(); break;
case "모든 레이어 끄기": CADUtil.TurnOffAllLayers(); break;
case "C":
{
ClearListBox(lst_L1);
ClearListBox(lst_L2);
ClearListBox(lst_L3);
ClearListBox(lst_L4);
ClearListBox(lst_L5);
ClearListBox(lst_L6);
ClearListBox(lst_L7);
ClearListBox(lst_L8);
ClearListBox(lst_L9);
ClearListBox(lst_L10);
}
break;
case "F":
{
int n = 0;
if (LCG_1.Expanded)
{
n++;
}
if (LCG_2.Expanded)
{
n++;
}
if (LCG_3.Expanded)
{
n++;
}
if (LCG_4.Expanded)
{
n++;
}
if (LCG_5.Expanded)
{
n++;
}
if (LCG_6.Expanded)
{
n++;
}
if (LCG_7.Expanded)
{
n++;
}
if (LCG_8.Expanded)
{
n++;
}
if (LCG_9.Expanded)
{
n++;
}
if (LCG_10.Expanded)
{
n++;
}
int width = LCG_1.Size.Width;
int height = LCG_0.Height / n;
if (LCG_1.Expanded)
{
LCG_1.Size = new Size(width, height);
}
if (LCG_2.Expanded)
{
LCG_2.Size = new Size(width, height);
}
if (LCG_3.Expanded)
{
LCG_3.Size = new Size(width, height);
}
if (LCG_4.Expanded)
{
LCG_4.Size = new Size(width, height);
}
if (LCG_5.Expanded)
{
LCG_5.Size = new Size(width, height);
}
if (LCG_6.Expanded)
{
LCG_6.Size = new Size(width, height);
}
if (LCG_7.Expanded)
{
LCG_7.Size = new Size(width, height);
}
if (LCG_8.Expanded)
{
LCG_8.Size = new Size(width, height);
}
if (LCG_9.Expanded)
{
LCG_9.Size = new Size(width, height);
}
if (LCG_10.Expanded)
{
LCG_10.Size = new Size(width, height);
}
}
break;
}
}
public void Play()
{
//Doc = Application.DocumentManager.MdiActiveDocument;
//Db = Doc.Database;
//DL = Doc.LockDocument(DocumentLockMode.ProtectedAutoWrite, null, null, true);
//Editor Editor = Application.DocumentManager.MdiActiveDocument.Editor;
PromptSelectionResult acPSR = AC.Editor.GetSelection();
// 선택한 객체를 받음
if (acPSR.Status == PromptStatus.OK)
{
var edgePtrs = new Curve2dCollection();
var edgeTypes = new IntegerCollection();
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
BlockTable BT = T.GetObject(AC.DB.BlockTableId, OpenMode.ForWrite) as BlockTable;
BlockTableRecord BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
SelectionSet acSSet = acPSR.Value;
foreach (var objID in acSSet.GetObjectIds())
{
var acEnt = T.GetObject(objID, OpenMode.ForWrite) as Entity;
if (acEnt is Polyline)
{
Polyline acPL = acEnt as Polyline;
GetEdgeInformation(acPL, ref edgePtrs, ref edgeTypes);
}
}
}
var acPolylines = from a in edgePtrs.Cast <Curve2d>()
orderby a.StartPoint.GetDistanceTo(a.EndPoint) descending
select a;
//var usedCurve = new List<Curve2d>();
var usedCurve = new List <Point2d>();
acPolylines.Cast <Curve2d>().ToList().ForEach(c =>
{
var CenterP = CADUtil.GetCenterPoint2d(c.StartPoint, c.EndPoint);
var curves = from a in edgePtrs.Cast <Curve2d>().ToList()
where a != c
select a;
// c와 평행한 선을 받음
var MatchedCurves = from a in curves
let d = a.GetDistanceTo(c)
where CADUtil.GetVector(a).GetNormal().IsEqualTo(-CADUtil.GetVector(c).GetNormal())
where d > Min && d < Max
let cp1 = CADUtil.GetCenterPoint2d(c)
let cp2 = CADUtil.GetCenterPoint2d(a)
orderby cp1.GetDistanceTo(cp2) ascending
select a;
if (MatchedCurves.Any())
{
//CAD.CreateLine(c.StartPoint, c.EndPoint);
bool B = true;
MatchedCurves.ToList().ForEach(c1 =>
{
var cp1 = CADUtil.GetCenterPoint2d(c1);
usedCurve.ForEach(cp2 =>
{
if (cp1.IsEqualTo(cp2))
{
B = false;
}
});
});
if (B)
{
CreateRectangle(c, MatchedCurves.ToList());
usedCurve.Add(CADUtil.GetCenterPoint2d(c));
}
}
});
}
else
{
Application.ShowAlertDialog("Number of objects selected: 0");
}
}
public List <Polyline> Create_Boundaries()
{
var Return = new List <Polyline>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
#region 택
var acSSet = Utils.Select.MultiObjs();
var acEnts = Utils.Get.Entity(acSSet, typeof(Polyline));
#endregion
#region 폴리라인 연장시켜 하나의 덩어리로 만들기
var acLines = new List <LineSegment3d>(); // 선택된 Polyline의 모든 선분을 담음(최대, 최소 좌표를 얻기위해)
var acTempLines = new List <Line>(); // 작업 완료 후 지울 보조선
acEnts.Where(x => x is Polyline).ToList().ForEach(acEnt =>
{
var acEntsCopy = acEnts.Where(x => x != acEnt);
var acPoly = acEnt as Polyline;
for (int i = 0; i < acPoly.NumberOfVertices; i++)
{
try
{
var acLine = acPoly.GetLineSegmentAt(i);
if (!acLines.Contains(acLine))
{
acLines.Add(acLine);
}
var Di = acLine.Direction;
var sp = acLine.StartPoint;
var ep = acLine.EndPoint;
var moved_sp = Utils.PointUtil.Move(acLine.StartPoint, -Di);
var moved_ep = Utils.PointUtil.Move(acLine.StartPoint, Di);
var LS1 = new LineSegment3d(sp, moved_sp); // Line에서 연장된 선분
var LS2 = new LineSegment3d(ep, moved_ep); // Line에서 연장된 선분
var IP1 = CADUtil.IntersectedLine(acEntsCopy.ToList(), LS1, sp, 500);
var IP2 = CADUtil.IntersectedLine(acEntsCopy.ToList(), LS2, ep, 500);
double d = 0;
if (IP1 != new Point3d())
{
var SP = Utils.PointUtil.Move(sp, Di * d);
var EP = Utils.PointUtil.Move(IP1, -Di * d);
var L1 = CADUtil.CreateLine(SP, EP, ColorIndex.DarkGray);
acTempLines.Add(L1);
}
if (IP2 != new Point3d())
{
var SP = Utils.PointUtil.Move(ep, -Di * d);
var EP = Utils.PointUtil.Move(IP2, Di * d);
var L2 = CADUtil.CreateLine(SP, EP, ColorIndex.DarkGray);
acTempLines.Add(L2);
}
}
catch { }
}
});
#endregion
#region 폴리라인을 감싸는 Box객체를 생성
var P_X = (from a in acLines
let p = a.StartPoint
orderby p.X
select p.X);
var P_Y = (from a in acLines
let p = a.StartPoint
orderby p.Y
select p.Y);
var Min_P = new Point3d(P_X.First() - 1000, P_Y.First() - 1000, 0);
var Max_P = new Point3d(P_X.Last() + 1000, P_Y.Last() + 1000, 0);
var Box = CADUtil.CreateRectangle(Min_P, Max_P);
#endregion
#region 밀폐된 공간에서 Boundary 추적
var P1 = Utils.PointUtil.Move(Min_P, 500, 500);
var objColl = AC.Editor.TraceBoundary(P1, true);
var acObjs = from a in objColl.Cast <Entity>().ToList() select a;
#endregion
#region Boundary 생성
if (acObjs.Any())
{
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
var BT = T.GetObject(AC.DB.BlockTableId, OpenMode.ForRead) as BlockTable;
var BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
acObjs.ToList().ForEach(a =>
{
var acPoly = a as Polyline;
if (Math.Abs(acPoly.Area - Box.Area) > 1)
{
BTR.AppendEntity(acPoly);
T.AddNewlyCreatedDBObject(acPoly, true);
Return.Add(acPoly);
}
});
T.Commit();
}
}
#endregion
#region 제거
CADUtil.Erase(Box.Id);
acTempLines.ForEach(a => CADUtil.Erase(a.Id));
#endregion
}
return(Return);
}
public void CreateKeyLine()
{
bool B = true;
while (B)
{
//#region PRE
//SelectionSet acSSet = SelectLines();
//if (acSSet == null)
//{
// B = false;
// return;
//}
//#endregion
//#region 폴리라인 선택
//var selectedPolyLines = new List<Polyline>();
//var acPolylines = new List<Polyline>();
//using (Transaction T = AC.DB.TransactionManager.StartTransaction())
//{
// var Lines = from id in acSSet.GetObjectIds()
// let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
// where acEnt is Polyline
// let acLine = acEnt as Polyline
// select acLine;
// if (!Lines.Any())
// return;
// selectedPolyLines.AddRange(Lines.ToArray());
//}
//#endregion
var Polylines = select.Objects <Polyline>();
var acPolylines = new List <Polyline>();
#region 폴리라인 정리
Polylines.ForEach(pl =>
{
#region 폴리라인에서 커브 담기
var curves = new List <Curve3d>();
for (int i = 0; i < pl.NumberOfVertices; i++)
{
try
{
var l = pl.GetLineSegmentAt(i).Length;
if (l >= Min && l <= Max)
{
curves.Add(pl.GetLineSegmentAt(i));
}
}
catch (System.Exception)
{
}
}
#endregion
#region 폴리라인 장축 중심을 읻는 선
if (curves.Count == 2)
{
var cv1 = curves[0];
var cv2 = curves[1];
var p1 = CADUtil.GetCenterPoint3d(cv1);
var p2 = CADUtil.GetCenterPoint3d(cv2);
var vec = CADUtil.GetVector(p1, p2);
var X = (vec * extend).X;
var Y = (vec * extend).Y;
var sp = CADUtil.MoveP(p1, -X, -Y, 0);
var ep = CADUtil.MoveP(p2, X, Y, 0);
var acPolyline = CADUtil.CreatePolyline(sp, ep);
acPolylines.Add(acPolyline);
}
#endregion
});
#endregion
using (DocumentLock DL = AC.Doc.LockDocument())
{
#region 검토 & 연속된 선 연결
// 제거할 선들
var deletePolylines = new List <Polyline>();
acPolylines.ForEach(pl1 =>
{
var contiPolylines = new List <Polyline>();
// 평행하고 같은 선상에 있는 선들
var paralPolylines = from pl2 in acPolylines
where !deletePolylines.Contains(pl2)
let line1 = pl1.GetLineSegmentAt(0)
let line2 = pl2.GetLineSegmentAt(0)
where line1.IsParallelTo(line2, new Tolerance(1, 1))
where IsAlmostEqual(line1, line2)
select pl2;
// 평행하고 같은 선상에 있는 선들 개수
int N = paralPolylines.Count();
var paralNearPolylines = from pl2 in paralPolylines
let line1 = pl1.GetLineSegmentAt(0)
let line2 = pl2.GetLineSegmentAt(0)
where CADUtil.getNearDistance(line1, line2) < distance
select pl2;
if (paralNearPolylines.Any())
{
contiPolylines.AddRange(paralNearPolylines);
for (int j = 0; j < N; j++)
{
contiPolylines.ToList().ForEach(a =>
{
var srtPolylines = from pl2 in acPolylines
where !contiPolylines.Contains(pl2)
let line1 = a.GetLineSegmentAt(0)
let line2 = pl2.GetLineSegmentAt(0)
where line1.IsParallelTo(line2, new Tolerance(1, 1))
where IsAlmostEqual(line1, line2)
where CADUtil.getNearDistance(line1, line2) < 2 * extend + distance
select pl2;
if (srtPolylines.Any())
{
contiPolylines.AddRange(srtPolylines);
}
});
}
}
if (contiPolylines.Any())
{
var Ps = CADUtil.getFurPoints(contiPolylines.ToList());
var acPolyline = CADUtil.CreatePolyline(Ps[0], Ps[1]);
deletePolylines.AddRange(contiPolylines);
}
});
#endregion
#region 제거
using (OpenCloseTransaction T = AC.DB.TransactionManager.StartOpenCloseTransaction())
{
deletePolylines.ForEach(a =>
{
var entity = T.GetObject(a.Id, OpenMode.ForWrite) as Entity;
if (!entity.IsErased)
{
entity.Erase(true);
}
});
T.Commit();
}
#endregion
}
}
AC.Editor.WriteMessage("\n키라인 입력완료 ");
AC.Editor.PostCommandPrompt();
}
public void CreateText_Polyline_Center()
{
var acPolyLines = new List <Polyline>();
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
try
{
#region 폴리라인 선택
SelectionSet acSSet = SelectLines();
var Lines = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
select acLine;
if (!Lines.Any())
{
return;
}
acPolyLines.AddRange(Lines.ToArray());
#endregion
}
catch (System.Exception ex)
{
AC.Editor.WriteMessage(Convert.ToString(ex));
}
}
#region 실행
acPolyLines.ForEach(acPolyline =>
{
double X = 0;
double Y = 0;
int N = acPolyline.NumberOfVertices;
double length = 0;
double ang = 0;
if (U002.Instance.rotate)
{
for (int i = 0; i < N; i++)
{
try
{
var L = acPolyline.GetLineSegment2dAt(i);
var CP = CADUtil.GetCenterPoint2d(L);
X += CP.X;
Y += CP.Y;
if (length < L.Length)
{
length = L.Length;
ang = CADUtil.GetVector(L).Angle;
}
}
catch
{
N = N - 1;
}
}
if (ang > Math.PI / 2 && ang <= Math.PI / 2 * 3)
{
ang += Math.PI;
}
}
var P = acPolyline.NumberOfVertices == 4 ? GetCenterPoint(acPolyline) : GetVisualCenterPoint(acPolyline);
var acText = CADUtil.CreateText(P, T_Size, ang, T_Position, Txt);
});
#endregion
AC.Editor.WriteMessage("\nPolyline 내부에 Text생성이 완료되었습니다.");
AC.Editor.PostCommandPrompt();
}
public static List <ObjectId> Create2(Polyline acPoly, ObjectId LayerID, ObjectId StyleID)
{
List <ObjectId> Return = new List <ObjectId>();
#region 객체 받기
var A = Utils.Get.PointCollection(acPoly);
var acCPSSet = AC.Editor.SelectCrossingPolygon(A).Value;
if (acCPSSet.Count == 0)
{
return(new List <ObjectId>());
}
var Texts = Utils.Get.GetEntity <DBText>(acCPSSet);
var Dims = Utils.Get.GetEntity <AlignedDimension>(acCPSSet);
#endregion
#region 면적 지우기
if (Texts.Any())
{
var acTexts = Texts.Where(x => Utils.Get.IsDouble(x.TextString)).ToList();
if (acTexts.Count == 1)
{
using (Transaction t = AC.DB.TransactionManager.StartTransaction())
{
acTexts.ForEach(text =>
{
var B = t.GetObject(text.Id, OpenMode.ForWrite) as DBText;
B.Erase(true);
t.Commit();
});
}
}
}
#endregion
#region 치수선 지우기 & 치수선 생성
if (Dims.Any())
{
using (Transaction t = AC.DB.TransactionManager.StartTransaction())
{
Dims.ToList().ForEach(Dim =>
{
var acDim = t.GetObject(Dim.Id, OpenMode.ForWrite) as AlignedDimension;
if (Utils.PointUtil.IsInsidePolyline(acPoly, acDim.TextPosition, true))
{
acDim.Erase(true);
}
});
t.Commit();
}
}
Return.AddRange(Utils.DIMUtil.Create(A.Cast <Point3d>().ToList(), 100, false, StyleID, LayerID));
#endregion
#region 새로 면적 입력
var p = Utils.PointUtil.Move(Utils.PointUtil.GetCenterP(acPoly), 0, -100);
var PL_Area = acPoly.Area; // mm²
var Area = Math.Round(PL_Area / 1000000, 3); // m²
var acText = CADUtil.CreateText(p, 200, Area.ToString(), ColorIndex.Red);
//var acText = CAD.CreateText(p, 100, Area.ToString() + "m²", TxtStyleId, ColorIndex.Green);
Return.Add(acText.Id);
#endregion
return(Return);
}
/// <summary>
/// 폴리선과 텍스트를 한번에 선택하여 폴리선 내부의 텍스트를 회전한다.
/// </summary>
public void RotateTexts_by_Polyline()
{
var acPolyLines = new List <Polyline>();
var acTexts = new List <DBText>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
#region 폴리라인 | 텍스트 선택
SelectionSet acSSet = SelectLinesAndTexts();
#region 폴리라인
var Polylines = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
select acLine;
if (!Polylines.Any())
{
MessageBox.Show("선택된 폴리선이 없습니다.");
return;
}
acPolyLines.AddRange(Polylines.ToArray());
#endregion
#region 텍스트 받기
var Texts = from id in acSSet.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is DBText
let acText = acEnt as DBText
select acText;
if (!Texts.Any())
{
MessageBox.Show("선택된 텍스트가 없습니다.");
return;
}
acTexts.AddRange(Texts.ToArray());
#endregion
#endregion
acTexts.ForEach(t =>
{
#region 텍스트가 입력된 폴리라인 찾기
var matchedPL = from pl in acPolyLines
where IsInsideInPolyline(pl, t.Position)
select pl;
#endregion
if (matchedPL.Any())
{
var acPolyline = matchedPL.First();
#region 각도 구하기
bool shape = U002.Instance.shape;
double X = 0;
double Y = 0;
int N = acPolyline.NumberOfVertices;
double length = shape ? 0 : double.MaxValue;
double ang = t.Rotation;
if (U002.Instance.rotate2)
{
for (int i = 0; i < N; i++)
{
try
{
var L = acPolyline.GetLineSegment2dAt(i);
var CP = CADUtil.GetCenterPoint2d(L);
X += CP.X;
Y += CP.Y;
#region 장축
if (shape)
{
// 장축
if (length < L.Length)
{
length = L.Length;
ang = CADUtil.GetVector(L).Angle;
}
}
#endregion
#region 단축
else
{
// 단축
if (length > L.Length)
{
length = L.Length;
ang = CADUtil.GetVector(L).Angle;
}
}
#endregion
}
catch
{
N = N - 1;
}
}
// 둔각일 경우
if (ang > Math.PI / 2 && ang <= Math.PI / 2 * 3)
{
ang += Math.PI;
}
}
else if (U002.Instance.rotate3)
{
ang = double.Parse(U002.Instance.T_angle) / 180 * Math.PI;
}
#endregion
#region 텍스트 이동 | 회전
var acText = T.GetObject(t.Id, OpenMode.ForWrite) as DBText;
if (U002.Instance.move)
{
var p = acPolyline.NumberOfVertices == 4 ? GetCenterPoint(acPolyline) : GetVisualCenterPoint(acPolyline);
MoveText(acText, p);
//acText.Position = p;
}
if (U002.Instance.rotate2 || U002.Instance.rotate3)
{
acText.Rotation = ang;
}
#endregion
}
});
T.Commit();
}
}
AC.Editor.WriteMessage("\nText 정렬이 완료되었습니다.");
AC.Editor.PostCommandPrompt();
}
/// <summary>
/// 폴리선과 텍스트를 각각 선택하여 폴리선에 맞게 텍스트를 회전한다.
/// </summary>
public void RotateText_by_Polyline()
{
bool B = true;
while (B)
{
#region PRE
SelectionSet acSSet1 = SelectAPolyline();
if (acSSet1 == null)
{
B = false;
return;
}
SelectionSet acSSet2 = SelectAText();
if (acSSet2 == null)
{
B = false;
return;
}
#endregion
using (DocumentLock DL = AC.Doc.LockDocument())
{
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
#region 폴리라인 선택
var Lines = from id in acSSet1.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is Polyline
let acLine = acEnt as Polyline
select acLine;
if (!Lines.Any())
{
return;
}
#endregion
#region 각도 구하기 [ang]
var acPolyline = Lines.ToList().First();
bool shape = U002.Instance.shape; // 장축 & 단축 판별
double X = 0;
double Y = 0;
int N = acPolyline.NumberOfVertices;
double length = shape ? 0 : double.MaxValue;
double ang = 0;
if (U002.Instance.rotate2)
{
for (int i = 0; i < N; i++)
{
try
{
var L = acPolyline.GetLineSegment2dAt(i);
var CP = CADUtil.GetCenterPoint2d(L);
X += CP.X;
Y += CP.Y;
#region 장축
if (shape)
{
// 장축
if (length < L.Length)
{
length = L.Length;
ang = CADUtil.GetVector(L).Angle;
}
}
#endregion
#region 단축
else
{
// 단축
if (length > L.Length)
{
length = L.Length;
ang = CADUtil.GetVector(L).Angle;
}
}
#endregion
}
catch
{
N = N - 1;
}
}
// 둔각인 경우
if (ang > Math.PI / 2 && ang <= Math.PI / 2 * 3)
{
ang += Math.PI;
}
}
else if (U002.Instance.rotate3)
{
ang = double.Parse(U002.Instance.T_angle) / 180 * Math.PI;
}
#endregion
#region 텍스트 선택
var Entities = from id in acSSet2.GetObjectIds()
let acEnt = T.GetObject(id, OpenMode.ForWrite) as Entity
where acEnt is DBText
select acEnt;
if (!Entities.Any())
{
return;
}
#endregion
#region 텍스트 이동 | 회전
var acText = T.GetObject(Entities.First().Id, OpenMode.ForWrite) as DBText;
if (U002.Instance.move)
{
var p = acPolyline.NumberOfVertices == 4 ? GetCenterPoint(acPolyline) : GetVisualCenterPoint(acPolyline);
MoveText(acText, p);
}
if (U002.Instance.rotate2 || U002.Instance.rotate3)
{
acText.Rotation = ang;
}
#endregion
T.Commit();
}
}
}
AC.Editor.WriteMessage("\nText 정렬이 완료되었습니다.");
AC.Editor.PostCommandPrompt();
}
public void CreateWallPolyLine()
{
bool B = true;
do
{
try
{
#region 택한 폴리선에서 각 선들 받기 [edgePtrs]
var edgePtrs = new Curve2dCollection();
var edgeTypes = new IntegerCollection();
select.Objects <Polyline>().ForEach(p =>
{
GetEdgeInformation(p, ref edgePtrs, ref edgeTypes);
});
//using (Transaction t = AC.DB.TransactionManager.StartTransaction())
//{
//SelectionSet acSSet = SelectPolylines();
//if (acSSet == null)
//{
// AC.Editor.PostCommandPrompt();
// return;
//}
//var Polylines = from id in acSSet.GetObjectIds()
// let acEnt = t.GetObject(id, OpenMode.ForWrite) as Entity
// where acEnt is Polyline
// let acPolyLine = acEnt as Polyline
// select acPolyLine;
//if (Polylines.Any())
//{
// Polylines.ToList().ForEach(p =>
// {
// GetEdgeInformation(p, ref edgePtrs, ref edgeTypes);
// });
//}
//}
#endregion
var acPolylines = from a in edgePtrs.Cast <Curve2d>()
orderby a.StartPoint.GetDistanceTo(a.EndPoint) descending
select a;
var usedCurve = new List <Point2d>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
acPolylines.Cast <Curve2d>().ToList().ForEach(c =>
{
var CenterP = point.GetCenterP(c.StartPoint, c.EndPoint);
var curves = from a in edgePtrs.Cast <Curve2d>().ToList()
where a != c
select a;
// c와 평행한 선을 받음
var MatchedCurves = from a in curves
let d = Math.Round(a.GetDistanceTo(c))
where CADUtil.GetVector(a).GetNormal().IsEqualTo(-CADUtil.GetVector(c).GetNormal())
where d >= Min && d <= Max
let cp1 = CADUtil.GetCenterPoint2d(c)
let cp2 = CADUtil.GetCenterPoint2d(a)
orderby cp1.GetDistanceTo(cp2) ascending
select a;
if (MatchedCurves.Any())
{
//CAD.CreateLine(c.StartPoint, c.EndPoint);
bool B1 = true;
MatchedCurves.ToList().ForEach(c1 =>
{
var cp1 = CADUtil.GetCenterPoint2d(c1);
usedCurve.ForEach(cp2 =>
{
if (cp1.IsEqualTo(cp2))
{
B1 = false;
}
});
});
if (B1)
{
CreateRectangle(c, MatchedCurves.ToList());
usedCurve.Add(CADUtil.GetCenterPoint2d(c));
}
}
});
}
}
catch
{
B = false;
}
} while (B);
AC.Editor.WriteMessage("\n벽 입력완료 ");
AC.Editor.PostCommandPrompt();
}
/// <summary>
/// 폴리라인의 중심점 구하기
/// </summary>
/// <param name="acPolyline"></param>
/// <returns></returns>
private Point3d GetVisualCenterPoint(Polyline acPolyline)
{
#region 폴리라인 내부 점 받기
var min_P = acPolyline.Bounds.Value.MinPoint;
var max_P = acPolyline.Bounds.Value.MaxPoint;
int n = 20;
double dis_X = (max_P.X - min_P.X) / n;
double dis_Y = (max_P.Y - min_P.Y) / n;
var Points = new List <Point3d>();
for (int i = 0; i < n + 1; i++)
{
for (int j = 0; j < n + 1; j++)
{
var p = CADUtil.MoveP(min_P, dis_X * j, dis_Y * i);
if (IsInsideInPolyline(acPolyline, p))
{
Points.Add(p);
}
}
}
#endregion
#region 무게중심
double value = double.MaxValue;
Point3d cp = new Point3d();
Points.ForEach(p1 =>
{
double val = 0;
Points.ForEach(p2 =>
{
if (!p1.IsEqualTo(p2))
{
val += p1.DistanceTo(p2) * p1.DistanceTo(p2);
}
});
if (value > val)
{
value = val;
cp = p1;
}
});
return(cp);
#endregion
#region 폴리라인의 중심점
var X = 0.0;
var Y = 0.0;
Points.ForEach(p =>
{
X += (p.X) / Points.Count;
Y += (p.Y) / Points.Count;
});
//return new Point3d(X, Y, 0);
#endregion
#region 점, 문자
//using (Transaction T = acDb.TransactionManager.StartTransaction())
//{
// BlockTable BT = T.GetObject(acDb.BlockTableId, OpenMode.ForRead) as BlockTable;
// BlockTableRecord BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
// DBPoint p1 = new DBPoint(min_P);
// DBPoint p2 = new DBPoint(max_P);
// DBPoint p3 = new DBPoint(new Point3d(X, Y, 0));
// DBPoint p4 = new DBPoint(cp);
// //BTR.AppendEntity(p1);
// //BTR.AppendEntity(p2);
// //BTR.AppendEntity(p3);
// BTR.AppendEntity(p4);
// //T.AddNewlyCreatedDBObject(p1, true);
// //T.AddNewlyCreatedDBObject(p2, true);
// //T.AddNewlyCreatedDBObject(p3, true);
// T.AddNewlyCreatedDBObject(p4, true);
// for (int i = 0; i < Points.Count; i++)
// {
// //using (DBPoint acPoint = new DBPoint(Points[i]))
// //{
// // BTR.AppendEntity(acPoint);
// // T.AddNewlyCreatedDBObject(acPoint, true);
// //}
// }
// acDb.Pdmode = 34;
// acDb.Pdsize = 150;
// T.Commit();
//}
//return new Point3d();
#endregion
}
void LinkRoom()
{
// F = GC.SelectedRows
// f = GC.GetFocusedRow();
#region 택
var F = Utils.GC.GetSelectedRows <Room>(GV);
if (F.Count == 0)
{
return;
}
#endregion
#region 치수
foreach (Room f in F)
{
var msg = string.Format("실 {0} 을/를 선택하세요", f.Name);
if (new U_Msgbox("실(공간) 선택", msg).ShowDialog() != DialogResult.OK)
{
break;
}
var acSSet = Utils.Select.SingleObj(string.Format("실 {0} 를 선택하세요", f.Name));
if (acSSet == null)
{
continue;
}
var acPolys = Utils.Get.GetEntity <Polyline>(acSSet);
if (acPolys.Count == 0)
{
continue;
}
var acPoly = acPolys.First();
if (acPoly.Id == ObjectId.Null)
{
continue;
}
f.Id = acPoly.Id;
f.Handle = acPoly.Handle;
f.IsLink = true;
f.Area = Math.Round(acPoly.Area / 1000000, 4);
var A = F.Where(a => a.Handle.Equals(f.Handle));
if (A.Any())
{
RefreshRoom(f.Handle);
}
else
{
var cen = Utils.PointUtil.GetCenterP(acPoly);
var pos1 = new Point3d(cen.X, cen.Y + 150, cen.Z);
var pos2 = new Point3d(cen.X, cen.Y - 150, cen.Z);
// 이름 적기
f.ChildrenH.Add(CADUtil.CreateText(pos1, 200, f.Name, ColorIndex.Red).Handle);
// 길이 적기
var objIds = Utils.DIMUtil.ReCreate(acPoly, DB.DimLayerId, DB.DimStyleId);
f.ChildrenH.AddRange(Utils.Get.ObjHandles(objIds));
// 면적 적기
f.ChildrenH.Add(CADUtil.CreateText(pos2, 200, Math.Round(f.Area, 4).ToString(), ColorIndex.Red).Handle);
}
}
#endregion
GV.RefreshData();
DB.ROOM = GC.DataSource as List <Room>;
}
public List <Polyline> Create_Boundaries_Util(double Dis = 100)
{
var Return = new List <Polyline>();
using (DocumentLock DL = AC.Doc.LockDocument())
{
#region 택
var acSSet = Utils.Select.MultiObjs();
var acEnts = Utils.Get.Entity(acSSet, typeof(Polyline));
#endregion
#region 폴리라인 연장시켜 폴리라인 생성
acEnts.Where(x => x is Polyline).ToList().ForEach(acEnt =>
{
var acPoly = acEnt as Polyline;
var acTempLines = new List <Line>(); // 작업 완료 후 지울 보조선
#region 폴리라인 선분 연장선 생성
for (int i = 0; i < acPoly.NumberOfVertices; i++)
{
try
{
var acLine = acPoly.GetLineSegmentAt(i);
var sp = acLine.StartPoint;
var ep = acLine.EndPoint;
var Direction = acLine.Direction;
var SP = sp - Direction * Dis;
var EP = ep + Direction * Dis;
var L = CADUtil.CreateLine(SP, EP);
acTempLines.Add(L);
}
catch { }
}
#endregion
#region 택된 폴리라인의 중앙점
var CP = Utils.PointUtil.GetCenterP(acPoly);
#endregion
#region 밀폐된 공간에서 Boundary 생성
// 선택된 객체 말고 모두 숨긴뒤에 실행해야 오류가 줄어듬
var objColl = AC.Editor.TraceBoundary(CP, true);
var acObjs = from a in objColl.Cast <Entity>().ToList() select a;
if (acObjs.Any())
{
using (Transaction T = AC.DB.TransactionManager.StartTransaction())
{
var BT = T.GetObject(AC.DB.BlockTableId, OpenMode.ForRead) as BlockTable;
var BTR = T.GetObject(BT[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
acObjs.ToList().ForEach(a =>
{
var Poly = a as Polyline;
BTR.AppendEntity(Poly);
T.AddNewlyCreatedDBObject(Poly, true);
Return.Add(Poly);
});
T.Commit();
}
}
#endregion
#region 연장선 제거
acTempLines.ForEach(a => CADUtil.Erase(a.Id));
#endregion
});
#endregion
}
return(Return);
}
