private HashSet <LineShape> FilterHorizontalLines(Image hlines, BoundedObjectGrid <CheckboxShape> checkboxGrid)
{
HashSet <LineShape> lines = new HashSet <LineShape>();
int minThickLineWidth = LineDetector.MinThickLineWidth.MulDiv(hlines.VerticalResolution, 200);
int minThickLineLength = LineDetector.MinThickLineLength.MulDiv(hlines.HorizontalResolution, 200);
int maxBoxSize = this.MaxBoxSize.MulDiv(hlines.HorizontalResolution, 200);
// find connected components and do preliminary filtering
foreach (ConnectedComponent component in hlines.FindConnectedComponents(8))
{
Rectangle bounds = component.Bounds;
int maxWidth = component.MaxHeight();
bool isBad = false;
if (bounds.Width.Between(minThickLineWidth, minThickLineLength - 1) &&
bounds.Height.Between(minThickLineWidth, minThickLineLength - 1) &&
maxWidth > minThickLineLength)
{
// too thick for the length
isBad = true;
}
if (!isBad && bounds.Width <= maxBoxSize && checkboxGrid != null && checkboxGrid.EnumObjects(bounds).Any())
{
// is part of the check box
isBad = true;
}
if (isBad)
{
hlines.SetWhite(bounds);
}
else
{
LineShape newline = new LineShape(bounds, maxWidth, LineTypes.Horizontal);
lines.Add(newline);
}
}
// find line vectors
AlignedObjectGrid <LineShape> grid = new AlignedObjectGrid <LineShape>(hlines.Bounds, 10, 20, RectangleLTRBComparer.Default);
grid.AddRange(lines, true, true);
int minLineLength = (this.MinHorizontalLineLength * hlines.HorizontalResolution).Round();
int maxGap = LineDetector.MaxLineGap.MulDiv(hlines.HorizontalResolution, 200);
int tolerance = 3.MulDiv(hlines.VerticalResolution, 200);
HashSet <LineShape> newlines = new HashSet <LineShape>();
foreach (LineShape line in lines)
{
if (line.VerticalAlignment == VerticalAlignment.None)
{
IList <LineShape> alignedLines = grid.FindVerticalAlignment(
line,
VerticalAlignment.Center,
maxGap,
tolerance,
(result, bounds) => bounds.Width >= minLineLength && (result.Count >= 2 || result.Any(o => o.Bounds.Width >= minLineLength)));
if (alignedLines.Count > 0)
{
LineShape newline = new LineShape(
Rectangle.Union(alignedLines.Select(x => x.Bounds)),
alignedLines[0].Begin,
alignedLines[alignedLines.Count - 1].End,
alignedLines.Max(x => x.Width),
LineTypes.Horizontal);
newlines.Add(newline);
}
}
}
// remove merged and short lines
lines.RemoveWhere(x =>
{
// remove merged lines
bool remove = x.VerticalAlignment != VerticalAlignment.None;
// remove small not merged lines
// also delete them from the image
if (x.VerticalAlignment == VerticalAlignment.None && x.Bounds.Width < minLineLength)
{
hlines.SetWhite(x.Bounds);
remove = true;
}
return(remove);
});
lines.UnionWith(newlines);
return(lines);
}
private HashSet <LineShape> FilterVerticalLines(Image vlines, Image hlines, BoundedObjectGrid <CheckboxShape> checkboxGrid)
{
HashSet <LineShape> lines = new HashSet <LineShape>();
int minThickLineWidth = LineDetector.MinThickLineWidth.MulDiv(vlines.HorizontalResolution, 200);
int minThickLineLength = LineDetector.MinThickLineLength.MulDiv(vlines.VerticalResolution, 200);
int maxBoxSize = this.MaxBoxSize.MulDiv(vlines.VerticalResolution, 200);
// find connected components and do preliminary filtering
foreach (ConnectedComponent component in vlines.FindConnectedComponents(8))
{
Rectangle bounds = component.Bounds;
int maxWidth = component.MaxWidth();
bool isBad = false;
if (bounds.Width.Between(minThickLineWidth, minThickLineLength - 1) &&
bounds.Height.Between(minThickLineWidth, minThickLineLength - 1) &&
maxWidth > minThickLineLength)
{
// too thick for the length
isBad = true;
}
if (!isBad && bounds.Height <= maxBoxSize && checkboxGrid != null && checkboxGrid.EnumObjects(bounds).Any())
{
// is part of the check box
isBad = true;
}
if (isBad)
{
vlines.SetWhite(bounds);
}
else
{
Point begin = new Point(component.GetLine(bounds.Y).Center, bounds.Y);
Point end = new Point(component.GetLine(bounds.Bottom - 1).Center, bounds.Bottom - 1);
LineShape line = new LineShape(bounds, begin, end, maxWidth, LineTypes.Vertical);
lines.Add(line);
}
}
// find line vectors
AlignedObjectGrid <LineShape> grid = new AlignedObjectGrid <LineShape>(vlines.Bounds, 10, 20, RectangleTBLRComparer.Default);
grid.AddRange(lines, true, true);
int minLineLength = (this.MinVerticalLineLength * vlines.VerticalResolution).Round();
int maxGap = LineDetector.MaxLineGap.MulDiv(vlines.VerticalResolution, 200);
int tolerance = 6.MulDiv(vlines.HorizontalResolution, 200);
HashSet <LineShape> newlines = new HashSet <LineShape>();
foreach (LineShape line in lines)
{
if (line.HorizontalAlignment == HorizontalAlignment.None)
{
IList <LineShape> alignedLines = grid.FindHorizontalAlignment(
line,
HorizontalAlignment.Center,
Math.Min(maxGap, line.Bounds.Height),
tolerance,
(result, bounds) => (bounds.Height >= minLineLength && (result.Count >= 3 || result.Any(o => o.Bounds.Height >= minLineLength))) || LineHasIntersectionsOnBothEnds(bounds));
if (alignedLines.Count > 0)
{
LineShape newline = new LineShape(
Rectangle.Union(alignedLines.Select(x => x.Bounds)),
alignedLines[0].Begin,
alignedLines[alignedLines.Count - 1].End,
alignedLines.Max(x => x.Width),
LineTypes.Vertical);
newlines.Add(newline);
}
}
}
// remove merged and short lines
lines.RemoveWhere(x =>
{
// remove merged lines
bool remove = x.HorizontalAlignment != HorizontalAlignment.None;
// remove small not merged lines
// also delete them from the image
if (x.HorizontalAlignment == HorizontalAlignment.None && x.Bounds.Height < minLineLength && !LineHasIntersectionsOnBothEnds(x.Bounds))
{
vlines.SetWhite(x.Bounds);
remove = true;
}
return(remove);
});
lines.UnionWith(newlines);
bool LineHasIntersectionsOnBothEnds(Rectangle bounds)
{
if (hlines != null)
{
int boxheight = Math.Min(bounds.Width, bounds.Height);
Rectangle top = new Rectangle(bounds.X, bounds.Y, bounds.Width, boxheight);
top.Inflate(0, 2 * boxheight);
top.Intersect(hlines.Bounds);
Rectangle bottom = new Rectangle(bounds.X, bounds.Bottom - boxheight, bounds.Width, boxheight);
bottom.Inflate(0, 2 * boxheight);
bottom.Intersect(hlines.Bounds);
return(!hlines.IsAllWhite(top) && !hlines.IsAllWhite(bottom));
}
else
{
return(false);
}
}
return(lines);
}
/// <summary>
/// Finds the horizontal and vertical lines on the <see cref="Image"/>.
/// The type of lines to find is determined by the class parameters.
/// </summary>
/// <param name="image">The source <see cref="Image"/>.</param>
/// <param name="cancellationToken">The cancellationToken token used to notify the <see cref="LineDetector"/> that operation should be canceled.</param>
/// <returns>
/// The detected lines.
/// </returns>
/// <exception cref="ArgumentNullException">
/// <paramref name="image"/> is <b>null</b>.
/// </exception>
/// <exception cref="NotImplementedException">
/// <see cref="Image{T}.BitsPerPixel"/> is not one.
/// </exception>
/// <remarks>
/// <para>This method works with binary (1bpp) images only.</para>
/// </remarks>
public ISet <Shape> FindLines(Image image, CancellationToken cancellationToken)
{
if (image == null)
{
throw new ArgumentNullException(nameof(image));
}
if (image.BitsPerPixel != 1)
{
throw new NotImplementedException(Properties.Resources.E_UnsupportedDepth_1bpp);
}
// find check boxes
ISet <CheckboxShape> checkboxResult = null;
BoundedObjectGrid <CheckboxShape> checkboxGrid = null;
if (this.FindCheckboxes)
{
checkboxResult = this.FindBoxes(image, cancellationToken);
checkboxGrid = new BoundedObjectGrid <CheckboxShape>(image.Bounds, 5, 10);
checkboxGrid.AddRange(checkboxResult, true, true);
}
HashSet <LineShape> hlinesResult = null;
HashSet <LineShape> vlinesResult = null;
if (this.LineTypes != LineTypes.None)
{
// masks we would like to find
Image hlines = null;
Image vlines = null;
FindLines();
if (hlines != null || vlines != null)
{
// filter out false positives
FilterFalsePositives(out Image nonHLines, out Image nonVLines);
if (this.RemoveLines)
{
if (hlines != null)
{
RemoveLines(hlines, nonHLines);
}
if (vlines != null)
{
RemoveLines(vlines, nonVLines);
}
if (hlines != null && vlines != null)
{
RemoveIntersections();
}
}
}
void FindLines()
{
// close up small holes
int maxLineWidth = LineDetector.MaxLineWidth.MulDiv(image.HorizontalResolution, 200);
Image closedImage = image.MorphClose(null, StructuringElement.Brick(maxLineWidth / 3, 2), 1, BorderType.BorderConst, image.WhiteColor);
// open up to detect big solid areas
Image openedImage = closedImage.MorphOpen(null, StructuringElement.Square(maxLineWidth), 1, BorderType.BorderConst, image.WhiteColor);
Image hollowImage = closedImage.Sub(null, openedImage, 0);
// open up in both directions to find lines
int minHorLineLength = LineDetector.MinHorLineLength.MulDiv(image.HorizontalResolution, 200);
hlines = hollowImage.MorphOpen(null, StructuringElement.Brick(minHorLineLength, 1), 1, BorderType.BorderConst, image.WhiteColor);
if (hlines.IsAllWhite())
{
hlines = null;
}
else
{
hlinesResult = this.FilterHorizontalLines(hlines, checkboxGrid);
if (hlinesResult.Count == 0)
{
hlines = null;
}
}
cancellationToken.ThrowIfCancellationRequested();
int minVerLineLength = LineDetector.MinVerLineLength.MulDiv(image.HorizontalResolution, 200);
vlines = hollowImage.MorphOpen(null, StructuringElement.Brick(1, minVerLineLength), 1, BorderType.BorderConst, image.WhiteColor);
if (vlines.IsAllWhite())
{
vlines = null;
}
else
{
vlinesResult = this.FilterVerticalLines(vlines, hlines, checkboxGrid);
if (vlinesResult.Count == 0)
{
vlines = null;
}
}
cancellationToken.ThrowIfCancellationRequested();
}
void FilterFalsePositives(out Image nonHLines, out Image nonVLines)
{
nonHLines = null;
nonVLines = null;
Image nonLines = null;
if (hlines != null)
{
nonLines = image.Sub(nonLines, hlines, 0);
}
if (vlines != null)
{
nonLines = (nonLines ?? image).Sub(nonLines, vlines, 0);
}
Image intersections = vlines != null && hlines != null ? hlines & vlines : null;
int maxLineResidue = 6; //// LineDetector.MaxLineResidue.MulDiv(image.HorizontalResolution, 200);
if (hlines != null)
{
nonHLines = nonLines.Erode(null, StructuringElement.Brick(1, maxLineResidue), 1, BorderType.BorderConst, image.WhiteColor);
nonHLines.FloodFill(nonHLines, 8, nonLines);
if (vlines != null)
{
nonHLines += vlines;
nonHLines -= intersections;
}
}
////int maxLineResidue = 6; //// LineDetector.MaxLineResidue.MulDiv(image.HorizontalResolution, 200);
if (vlines != null)
{
nonVLines = nonLines.Erode(null, StructuringElement.Brick(maxLineResidue, 1), 1, BorderType.BorderConst, image.WhiteColor);
nonVLines.FloodFill(nonVLines, 8, nonLines);
if (hlines != null)
{
nonVLines += hlines;
nonVLines -= intersections;
}
}
int removedCount = 0;
do
{
removedCount = 0;
// horizontal lines
if (hlines != null)
{
int count = this.RemoveHorizontalLinesFalsePositives(hlinesResult, hlines, nonHLines, intersections);
if (count > 0)
{
removedCount += count;
if (vlines != null)
{
// recompute intersections
intersections = hlines.And(intersections, vlines);
}
if (hlinesResult.Count == 0)
{
hlines = null;
}
}
cancellationToken.ThrowIfCancellationRequested();
}
// vertical lines
if (vlines != null)
{
int count = this.RemoveVerticalLinesFalsePositives(vlinesResult, vlines, nonVLines, intersections);
if (count > 0)
{
removedCount += count;
if (hlines != null)
{
// recompute intersections
intersections = hlines.And(intersections, vlines);
}
if (vlinesResult.Count == 0)
{
vlines = null;
}
}
cancellationToken.ThrowIfCancellationRequested();
}
}while (removedCount != 0);
}
void RemoveLines(Image lines, Image nonLines)
{
// remove the lines
image.Xand(image, lines);
// dilate the lines so they touch the residue
// then flood fill then to get all the residue (image less non-lines)
Image fatLines = lines.Dilate3x3(null, BorderType.BorderConst, image.WhiteColor);
fatLines.FloodFill(fatLines, 8, image.Xand(null, nonLines));
// remove the residue
image.Xand(image, fatLines);
cancellationToken.ThrowIfCancellationRequested();
}
void RemoveIntersections()
{
// TODO:
// get the intersection residue
/*Image residue = hlines
* .And(null, vlines)
* .Dilate(null, StructuringElement.Square(5), 1, BorderType.BorderConst, image.WhiteColor);
*
* residue.FloodFill(residue, 8, image);
*
* // remove the residue
* image.Xand(image, residue);
*
* cancellationToken.ThrowIfCancellationRequested();*/
}
}
// delete check boxes from the image
if (this.RemoveCheckboxes && checkboxResult != null)
{
foreach (CheckboxShape shape in checkboxResult)
{
image.SetWhite(Rectangle.Inflate(shape.Bounds, 1, 1));
}
}
// create a draft that would show found check boxes
#if DEBUG
Image draft = image.ConvertTo(null, 32);
if (checkboxResult != null)
{
foreach (CheckboxShape shape in checkboxResult)
{
draft.DrawRectangle(shape.Bounds, Color.Green);
}
}
if (hlinesResult != null)
{
foreach (LineShape shape in hlinesResult)
{
draft.DrawRectangle(shape.Bounds, Color.Red);
}
}
if (vlinesResult != null)
{
foreach (LineShape shape in vlinesResult)
{
draft.DrawRectangle(shape.Bounds, Color.Red);
}
}
#endif
// create answer
HashSet <Shape> answer = new HashSet <Shape>();
if (hlinesResult != null)
{
answer.UnionWith(hlinesResult);
}
if (vlinesResult != null)
{
answer.UnionWith(vlinesResult);
}
if (checkboxResult != null)
{
answer.UnionWith(checkboxResult);
}
return(answer);
}
private ISet <CheckboxShape> FindBoxes(Image image, CancellationToken cancellationToken)
{
HashSet <CheckboxShape> result = new HashSet <CheckboxShape>(32);
// compute image-dependent parameters
int minBoxSizeH = this.MinBoxSize.MulDiv(image.HorizontalResolution, 200);
int maxBoxSizeH = this.MaxBoxSize.MulDiv(image.HorizontalResolution, 200);
int minBoxSizeV = this.MinBoxSize.MulDiv(image.VerticalResolution, 200);
int maxBoxSizeV = this.MaxBoxSize.MulDiv(image.VerticalResolution, 200);
// keep track of tested horizontal components that did not yield results
////HashSet<Rectangle> testedHBounds = new HashSet<Rectangle>();
HashSet <Rectangle> testedVBounds = new HashSet <Rectangle>();
// the algorithm proceeds in two steps
// first, we find a pair of parallel horizontal lines that have similar length and horizontal position
// second, we find a pair of parallel vertical lines that would connect horizontal lines on both sides to form a box
IList <ConnectedComponent> hlines = FindHorizontalLines();
if (hlines != null && hlines.Count > 0)
{
IList <ConnectedComponent> vlines = FindVerticalLines();
if (vlines != null && vlines.Count > 0)
{
BoundedObjectGrid <ConnectedComponent> hgrid = CreateGrid(hlines);
BoundedObjectGrid <ConnectedComponent> vgrid = CreateGrid(vlines);
foreach (ConnectedComponent vcomp1 in vlines.Where(x => x.Bounds.Height <= maxBoxSizeV))
{
if (vcomp1.HorizontalAlignment == HorizontalAlignment.None)
{
Rectangle vbounds1 = vcomp1.Bounds;
int vdelta = vbounds1.Height / 5;
foreach (ConnectedComponent vcomp2 in vgrid.EnumObjects(Rectangle.Inflate(vbounds1, vbounds1.Height.MulDiv(2, 1), 0)))
{
if (vcomp2 != vcomp1 && vcomp2.HorizontalAlignment == HorizontalAlignment.None)
{
// test second vertical component
if (!TestVerticalComponents(vbounds1, vcomp2, out Rectangle vbounds2, vdelta, out bool longVLine))
{
continue;
}
Rectangle vbounds = Rectangle.Union(vbounds1, vbounds2);
vdelta = MinMax.Max(vbounds.Width, vbounds.Height) / 5;
if (testedVBounds.Contains(vbounds))
{
continue;
}
testedVBounds.Add(vbounds);
// after we found a pair of matching horizontal lines
// start looking for a pair of vertical lines that connect them
ConnectedComponent hcompTop = null;
int topEst = 0;
ConnectedComponent hcompBottom = null;
int bottomEst = 0;
Rectangle hboundsBottom = Rectangle.Empty;
bool longHLine = false;
foreach (ConnectedComponent hcomp in hgrid.EnumObjects(Rectangle.Inflate(vbounds, 0, vdelta)))
{
if (hcomp.VerticalAlignment == VerticalAlignment.None)
{
if (TestTopComponent(vbounds, hcomp.Bounds, vdelta, out int est))
{
if (hcompTop == null || est < topEst)
{
hcompTop = hcomp;
topEst = est;
}
}
if (TestBottomComponent(vbounds, hcomp, out Rectangle hbounds, vdelta, out bool longLine, out est))
{
if (hcompBottom == null || est < bottomEst || (longHLine && !longLine))
{
hcompBottom = hcomp;
bottomEst = est;
hboundsBottom = hbounds;
longHLine = longLine;
}
}
}
}
if (hcompTop != null && hcompBottom != null)
{
Rectangle bounds = Rectangle.FromLTRB(vbounds.X, hcompTop.Bounds.Y, vbounds.Right, hboundsBottom.Bottom);
result.Add(new CheckboxShape(bounds));
// mark used components, so we do not test them twice
hcompTop.VerticalAlignment = VerticalAlignment.Top;
if (!longHLine)
{
hcompBottom.VerticalAlignment = VerticalAlignment.Bottom;
}
vcomp1.HorizontalAlignment = vbounds1.X < vbounds2.X ? HorizontalAlignment.Left : HorizontalAlignment.Right;
if (!longVLine)
{
vcomp2.HorizontalAlignment = vbounds2.X < vbounds1.X ? HorizontalAlignment.Left : HorizontalAlignment.Right;
}
}
}
}
}
}
}
}
return(result);
IList <ConnectedComponent> FindVerticalLines()
{
int maxLineWidth = LineDetector.MaxLineWidth.MulDiv(image.HorizontalResolution, 200);
Image lines = image.MorphOpen(null, StructuringElement.Brick(1, minBoxSizeV), 1, BorderType.BorderConst, image.WhiteColor);
if (lines.IsAllWhite())
{
return(null);
}
ISet <ConnectedComponent> comps = lines.FindConnectedComponents(8);
cancellationToken.ThrowIfCancellationRequested();
return(comps.Where(x => x.MaxWidth() <= maxLineWidth).ToArray());
}
IList <ConnectedComponent> FindHorizontalLines()
{
int maxLineWidth = LineDetector.MaxLineWidth.MulDiv(image.VerticalResolution, 200);
Image lines = image.MorphOpen(null, StructuringElement.Brick(minBoxSizeH, 1), 1, BorderType.BorderConst, image.WhiteColor);
if (lines.IsAllWhite())
{
return(null);
}
cancellationToken.ThrowIfCancellationRequested();
ISet <ConnectedComponent> comps = lines.FindConnectedComponents(8);
cancellationToken.ThrowIfCancellationRequested();
return(comps.Where(x => x.MaxHeight() <= maxLineWidth).ToArray());
}
BoundedObjectGrid <ConnectedComponent> CreateGrid(IEnumerable <ConnectedComponent> comps)
{
BoundedObjectGrid <ConnectedComponent> grid = new BoundedObjectGrid <ConnectedComponent>(image.Bounds, 10, 20);
grid.AddRange(comps, true, true);
return(grid);
}
bool TestVerticalComponents(Rectangle bounds1, ConnectedComponent comp, out Rectangle bounds2, int delta, out bool longLine)
{
longLine = false;
bounds2 = comp.Bounds;
if (bounds2.Height > maxBoxSizeV)
{
// if touching long line, get the part of it that intersects with the box
bounds2 = comp.Intersect(Rectangle.FromLTRB(bounds2.X, bounds1.Y, bounds2.Right, bounds1.Bottom));
longLine = true;
}
int dist = Math.Abs(bounds1.CenterX - bounds2.CenterX);
if (!dist.Between(minBoxSizeH, maxBoxSizeH))
{
// the distance between lines is invalid
return(false);
}
// both lines are isolated - check for squareness of the box
return(dist.Between(MinMax.Min(bounds1.Height, bounds2.Height) - delta, (2 * MinMax.Max(bounds1.Height, bounds2.Height)) + delta) &&
bounds2.Y.AreEqual(bounds1.Y, delta) &&
bounds2.Bottom.AreEqual(bounds1.Bottom, delta));
}
bool TestTopComponent(Rectangle vbounds, Rectangle hbounds, int delta, out int est)
{
int est1 = Math.Abs(hbounds.Top - vbounds.Top);
int est2 = Math.Abs(hbounds.X - vbounds.X);
int est3 = Math.Abs(hbounds.Right - vbounds.Right);
est = est1 + est2 + est3;
return(est1 <= delta && est2 <= delta && est3 <= delta);
}
bool TestBottomComponent(Rectangle vbounds, ConnectedComponent hcomp, out Rectangle hbounds, int delta, out bool longLine, out int est)
{
longLine = false;
hbounds = hcomp.Bounds;
if (hbounds.Width > maxBoxSizeH)
{
// if touching long line, get the part of it that intersects with the box
hbounds = hcomp.Intersect(Rectangle.FromLTRB(vbounds.X, hbounds.Y, vbounds.Right, hbounds.Bottom));
longLine = true;
}
int est1 = Math.Abs(hbounds.Bottom - vbounds.Bottom);
int est2 = Math.Abs(hbounds.X - vbounds.X);
int est3 = Math.Abs(hbounds.Right - vbounds.Right);
est = est1 + est2 + est3;
return(est1 <= delta && est2 <= delta && est3 <= delta);
}
}
/// <summary>
/// Finds machine-printed text on the <see cref="Image"/>.
/// The type of text to find is determined by the class parameters.
/// </summary>
/// <param name="image">The source <see cref="Image"/>.</param>
/// <param name="lines">The lines located on the <paramref name="image"/>.</param>
/// <param name="cancellationToken">The cancellationToken token used to notify the <see cref="TextDetector"/> that operation should be canceled.</param>
/// <returns>
/// The detected text.
/// </returns>
/// <exception cref="ArgumentNullException">
/// <paramref name="image"/> is <b>null</b>.
/// </exception>
/// <exception cref="NotImplementedException">
/// <see cref="Image{T}.BitsPerPixel"/> is not one.
/// </exception>
/// <remarks>
/// <para>This method works with binary (1bpp) images only.</para>
/// </remarks>
public ISet <TextShape> FindText(Image image, IEnumerable <LineShape> lines, CancellationToken cancellationToken)
{
if (image == null)
{
throw new ArgumentNullException(nameof(image));
}
if (image.BitsPerPixel != 1)
{
throw new NotImplementedException(Properties.Resources.E_UnsupportedDepth_1bpp);
}
Image closing = image.MorphClose(null, StructuringElement.Brick(9, 2), 1, BorderType.BorderConst, 0);
// find components
HashSet <ConnectedComponent> components = closing.FindConnectedComponents(4);
// filter components
int maxTextHeight = (TextDetector.MaxTextHeight * image.VerticalResolution).Round();
components.RemoveWhere(x => /*x.Power > 10 &&*/ x.Bounds.Height > maxTextHeight);
// index components
BoundedObjectGrid <ConnectedComponent> componentgrid = new BoundedObjectGrid <ConnectedComponent>(image.Bounds, 10, 20);
componentgrid.AddRange(components, true, true);
componentgrid.Compact();
// index vertical lines
BoundedObjectGrid <LineShape> vlines = new BoundedObjectGrid <LineShape>(image.Bounds, 10, 1);
vlines.AddRange(lines.Where(x => x.Types.HasFlag(LineTypes.Vertical)), true, true);
BoundedObjectGrid <TextShape> shapegrid = new BoundedObjectGrid <TextShape>(image.Bounds, 10, 20);
foreach (ConnectedComponent component in componentgrid.EnumObjects())
{
if (component.VerticalAlignment == VerticalAlignment.None)
{
IList <ConnectedComponent> alignedComponents = FindTextShapes(componentgrid, component);
if (alignedComponents.Count > 0)
{
shapegrid.Add(new TextShape(Rectangle.Union(alignedComponents.Select(x => x.Bounds))), true, true);
}
}
}
// assign unassigned components
foreach (ConnectedComponent component in componentgrid.EnumObjects())
{
if (component.VerticalAlignment == VerticalAlignment.None)
{
if (shapegrid.FindContainer(component.Bounds) == null)
{
shapegrid.Add(new TextShape(component.Bounds), true, true);
}
}
}
shapegrid.Compact();
// create result
HashSet <TextShape> shapes = new HashSet <TextShape>();
shapes.UnionWith(shapegrid.EnumObjects().Where(x => x.Bounds.Width > 4 && x.Bounds.Height > 10));
#if DEBUG
Image draft = image.ConvertTo(null, 32);
foreach (TextShape shape in shapes)
{
draft.DrawRectangle(shape.Bounds, Color.Red);
}
#endif
return(shapes);
IList <ConnectedComponent> FindTextShapes(BoundedObjectGrid <ConnectedComponent> grid, ConnectedComponent obj)
{
////Rectangle bounds = obj.Bounds;
SortedList <Rectangle, ConnectedComponent> result = new SortedList <Rectangle, ConnectedComponent>(RectangleLTRBComparer.Default);
Rectangle obounds = obj.Bounds;
// calculate initial pivot points
Line topline = new Line(obounds.Left, obounds.Top, obounds.Right, obounds.Top);
Line bottomline = new Line(obounds.Left, obounds.Bottom, obounds.Right, obounds.Bottom);
// find objects to the left
ConnectedComponent next;
while ((next = FindNext(obounds, false)) != null)
{
result.Add(next.Bounds, next);
next.VerticalAlignment = VerticalAlignment.Bottom;
obounds.Union(next.Bounds);
}
// find objects to the right
while ((next = FindNext(obounds, true)) != null)
{
result.Add(next.Bounds, next);
next.VerticalAlignment = VerticalAlignment.Bottom;
obounds.Union(next.Bounds);
}
if (result.Count > 0)
{
obj.VerticalAlignment = VerticalAlignment.Bottom;
result.Add(obj.Bounds, obj);
// mark contained elements
foreach (ConnectedComponent o in grid.EnumObjects(obounds))
{
if (o.VerticalAlignment == VerticalAlignment.None && obounds.Contains(o.Bounds))
{
o.VerticalAlignment = VerticalAlignment.Bottom;
result.Add(o.Bounds, o);
}
}
}
return(result.Values);
ConnectedComponent FindNext(Rectangle box, bool searchForward)
{
// Tolerance to skew on top of current estimate of skew. Divide x or y length
// by kMaxSkewFactor to get the y or x skew distance.
// If the angle is small, the angle in degrees is roughly 60/kMaxSkewFactor.
const int MaxSkewFactor = 15;
// compute search area
int xstart = searchForward ? box.Right : box.Left;
int xend = searchForward ? box.Right + (box.Height * 2) : box.Left - (box.Height * 2);
Rectangle searchArea = searchForward ?
Rectangle.FromLTRB(xstart, box.Top, xend, box.Bottom) :
Rectangle.FromLTRB(xend, box.Top, xstart, box.Bottom);
// look for lines crossing the search area
foreach (LineShape line in vlines.EnumObjects(searchArea))
{
int x = new Line(line.Begin, line.End).X(box.Bottom);
if (searchForward)
{
int right = MinMax.Min(searchArea.Right, x - (line.Width / 2));
searchArea.InflateX(0, right - searchArea.Right);
}
else
{
int left = MinMax.Max(searchArea.Left, x + (line.Width / 2));
searchArea.InflateX(searchArea.Left - left, 0);
}
}
if (searchArea.Width == 0 || searchArea.Height == 0)
{
return(null);
}
// Compute skew tolerance and expand the search box
int skewTolerance = searchArea.Width / MaxSkewFactor;
searchArea.Inflate(0, skewTolerance);
ConnectedComponent bestCandidate = null;
int bestDistance = int.MaxValue;
foreach (ConnectedComponent candidate in grid.EnumObjects(searchArea))
{
if (candidate.VerticalAlignment == VerticalAlignment.None)
{
Rectangle cbounds = candidate.Bounds;
int nearestx = searchForward ? cbounds.Left : cbounds.Right;
int distx = box.DistanceToX(nearestx);
bool skip = false;
// verify candidate position against baseline
if (!skip && bottomline.IsBelow(nearestx, cbounds.Top))
{
// candidate is below baseline
skip = true;
}
if (!skip && Math.Abs(bottomline.Y(nearestx) - cbounds.Bottom) > 10)
{
// candidate's bottom is far from baseline
skip = true;
}
if (!skip &&
((cbounds.Height > box.Height / 2 && cbounds.Height > 2 * box.Height) ||
(box.Height > cbounds.Height / 2 && box.Height > 2 * cbounds.Height)))
{
// box sizes too different
skip = true;
if (box.ContainsY(cbounds) && distx < box.Height)
{
// accept small elements locates inside the box that close to it
// could be some detached c.c. or punctuation
skip = false;
}
}
// find nearest element based on Eucledian distance
if (!skip)
{
int distance = box.DistanceToSquared(cbounds);
if (distance < bestDistance)
{
bestCandidate = candidate;
bestDistance = distance;
}
}
}
}
// update baseline and box
if (bestCandidate != null)
{
Rectangle cbounds = bestCandidate.Bounds;
if (cbounds.Height > box.Height / 2)
{
if (searchForward)
{
bottomline.X2 = cbounds.Right;
bottomline.Y2 = cbounds.Bottom;
}
else
{
bottomline.X1 = cbounds.Left;
bottomline.Y1 = cbounds.Bottom;
}
}
}
return(bestCandidate);
}
}
}
