/// <summary>
/// Implements the FailuresProcessing event
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
FailuresAccessor failuresAccessor = e.GetFailuresAccessor();
//failuresAccessor
String transactionName = failuresAccessor.GetTransactionName();
IList <FailureMessageAccessor> fmas = failuresAccessor.GetFailureMessages();
if (fmas.Count == 0)
{
e.SetProcessingResult(FailureProcessingResult.Continue);
return;
}
if (transactionName.Equals("Error_FailuresProcessingEvent"))
{
foreach (FailureMessageAccessor fma in fmas)
{
FailureDefinitionId id = fma.GetFailureDefinitionId();
if (id == Command.m_idError)
{
failuresAccessor.ResolveFailure(fma);
}
}
e.SetProcessingResult(FailureProcessingResult.ProceedWithCommit);
return;
}
e.SetProcessingResult(FailureProcessingResult.Continue);
}
/// <summary>
/// Implements the FailuresProcessing event
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
FailuresAccessor failuresAccessor = e.GetFailuresAccessor();
//failuresAccessor
String transactionName = failuresAccessor.GetTransactionName();
IList <FailureMessageAccessor> failures = failuresAccessor.GetFailureMessages();
if (failures.Count != 0)
{
foreach (FailureMessageAccessor f in failures)
{
FailureDefinitionId id = f.GetFailureDefinitionId();
if (id == BuiltInFailures.JoinElementsFailures.CannotJoinElementsError)
{
// only default option being choosen, not good enough!
//failuresAccessor.DeleteWarning(f);
failuresAccessor.ResolveFailure(f);
//failuresAccessor.
e.SetProcessingResult(FailureProcessingResult.ProceedWithCommit);
}
return;
}
}
}
private void ControlledApplication_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
var failList = e.GetFailuresAccessor().GetFailureMessages();
if (failList.Any())
{
e.GetFailuresAccessor().DeleteAllWarnings();
e.SetProcessingResult(FailureProcessingResult.Continue);
}
}
private void Application_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
// Inside event handler, get all warnings
var failList = e.GetFailuresAccessor().GetFailureMessages();
if (failList.Any())
{
// skip all failures
e.GetFailuresAccessor().DeleteAllWarnings();
e.SetProcessingResult(FailureProcessingResult.Continue);
}
}
void Application_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
//Errors handling
{
FailuresAccessor fa = e.GetFailuresAccessor();
IList <FailureMessageAccessor> failList = new List <FailureMessageAccessor>();
failList = fa.GetFailureMessages(); // Inside event handler, get all warnings
foreach (FailureMessageAccessor failure in failList)
{
// check FailureDefinitionIds against ones that you want to dismiss, FailureDefinitionId failID = failure.GetFailureDefinitionId();
// prevent Revit from showing Unenclosed room warnings
FailureDefinitionId failID = failure.GetFailureDefinitionId();
if (failID == BuiltInFailures.WorksharingFailures.DuplicateNamesChanged)
{
fa.DeleteWarning(failure);
}
}
}
/***************************************************/
/**** Private Event Handlers ****/
/***************************************************/
private static void ControlledApplication_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
bool hasFailure = false;
FailuresAccessor failuresAccessor = e.GetFailuresAccessor();
List <FailureMessageAccessor> failureMessageAccessorsList = failuresAccessor.GetFailureMessages().ToList();
List <ElementId> elementsToDelete = new List <ElementId>();
foreach (FailureMessageAccessor failureMessageAccessor in failureMessageAccessorsList)
{
try
{
if (failureMessageAccessor.GetSeverity() == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(failureMessageAccessor);
continue;
}
else
{
failuresAccessor.ResolveFailure(failureMessageAccessor);
hasFailure = true;
continue;
}
}
catch
{
}
}
if (elementsToDelete.Count != 0)
{
failuresAccessor.DeleteElements(elementsToDelete);
}
if (hasFailure)
{
e.SetProcessingResult(FailureProcessingResult.ProceedWithCommit);
}
e.SetProcessingResult(FailureProcessingResult.Continue);
}
private void Application_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
// Inside event handler, get all warnings
var failList = e.GetFailuresAccessor().GetFailureMessages();
if (failList.Any())
{
_undeleted++;
foreach (var failure in failList)
{
// check FailureDefinitionIds against ones that you want to dismiss,
var failId = failure.GetFailureDefinitionId();
// prevent Revit from showing Unenclosed room warnings
if (failId == BuiltInFailures.EditingFailures.CannotEditDeletedElements)
{
e.GetFailuresAccessor().DeleteAllWarnings();
}
}
e.SetProcessingResult(FailureProcessingResult.ProceedWithRollBack);
}
}
/// <summary>
/// Обработчик предупреждений
/// </summary>
private static void Application_FailuresProcessing(
object sender,
Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
var failureAccessor = e.GetFailuresAccessor();
var failList = failureAccessor.GetFailureMessages();
if (!failList.Any())
{
return;
}
if (failureAccessor.GetSeverity() == FailureSeverity.Warning)
{
failureAccessor.DeleteAllWarnings();
e.SetProcessingResult(FailureProcessingResult.Continue);
}
e.SetProcessingResult(failureAccessor.GetSeverity() == FailureSeverity.Error
? FailureProcessingResult.ProceedWithCommit
: FailureProcessingResult.ProceedWithRollBack);
}
public void Application_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
ExecuteEventHooks(EventType.Application_FailuresProcessing, sender, e);
}
/// <summary>
/// This is an event handler that responds to a failure according to the current settings
/// </summary>
/// <param name="sender">The sending object, i.e. the Revit application</param>
/// <param name="e">The event arguments</param>
public void AutoOptionsFailureHandler(Object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
//don't process if handling is turned off
if (currentSettings.HandlingActive == false)
{
return;
}
//update the uiApp reference
Application RevitApp = sender as Application;
uiApp = new UIApplication(RevitApp);
FailuresAccessor fa = e.GetFailuresAccessor();
//this is the action that will be taken to attempt resolution. Default is to continue the default Revit failure processing
FailureProcessingResult action = FailureProcessingResult.Continue;
foreach (FailureMessageAccessor fma in fa.GetFailureMessages())
{
AutoFailureHandlingOptions aFOpts = currentSettings.AllFailureOptions
.Where(x => x.FailureGuid == fma.GetFailureDefinitionId().Guid)
.FirstOrDefault();
if (aFOpts != null)
{
//Show the CatchFailures dialog if a failure was caught
if (currentSettings.InteractiveModeEnabled)
{
try
{
//todo: clone to allow roll-back?
FailureCatcherWindow failWin = new FailureCatcherWindow(currentSettings, aFOpts, uiApp);
Boolean?result = failWin.ShowDialog();
if (result.Value)
{
//Write changes to the .ini
currentSettings.LastUpdate = DateTime.Now;
IAutoOptionsRepository settingsRepo = new AutoOptionsConfigFileRepo();
settingsRepo.WriteAutoOptions(currentSettings);
}
}
catch (Exception ex)
{
TaskDialog.Show("ex", ex.Message + "\n" + ex.StackTrace);
throw;
}
}
FailureResolutionOption selectedResolution = aFOpts.SelectedResolution;
if (selectedResolution is AutoOptionsResolution)
{
try
{
switch (((AutoOptionsResolution)selectedResolution).Resolution)
{
case AutoOptionsResolutionType.NoAction:
break;
case AutoOptionsResolutionType.DeleteAffected:
fa.DeleteElements(fma.GetFailingElementIds().ToList());
action = FailureProcessingResult.ProceedWithCommit;
break;
case AutoOptionsResolutionType.CancelTransaction:
//todo: not working, being overwritten?
action = FailureProcessingResult.ProceedWithRollBack;
e.SetProcessingResult(action);
fa.RollBackPendingTransaction();
return;
case AutoOptionsResolutionType.HideWarning:
//todo: check if actually is a warning?
fa.DeleteWarning(fma);
break;
default:
break;
}
}
catch (Exception ex)
{
TaskDialog.Show("Dispatcher", ex.Message + "\n" + ex.Source + "\n" + ex.StackTrace);
}
}
else if (selectedResolution is RevitResolution)
{
try
{
FailureResolutionType fRT = ((RevitResolution)selectedResolution).Resolution;
if (fma.HasResolutionOfType(fRT))
{
fma.SetCurrentResolutionType(fRT);
fa.ResolveFailure(fma);
action = FailureProcessingResult.ProceedWithCommit;
}
else
{
TaskDialog.Show("AutoOptions", "The selected automatic resolution \n***" + aFOpts.SelectedResolution.FriendlyCaption + " (" + fRT + ")***\ncan't be used");
}
}
catch (Exception ex)
{
TaskDialog.Show("Dispatcher", ex.Message + "\n" + ex.Source + "\n" + ex.StackTrace);
}
}
}
}
e.SetProcessingResult(action);
}
