/// <summary>
/// 处理呼叫盒呼叫
/// </summary>
/// <param name="CallBoxID">呼叫盒ID</param>
/// <param name="BtnID">按钮ID</param>
/// <returns></returns>
private bool HandleCallBoxMonitor(CallBoxInfo CallBox, CallBoxDetail CurrBoxDetail, int BtnID)
{
try
{
#region 处理监控功能
//处理监控功能
//监控功能则为更新储位的状态
StorageInfo CallStore = CoreData.StorageList.FirstOrDefault(q => q.ID == CurrBoxDetail.LocationID);
if (CallStore == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位");
return(false);
}
int StoreState = CurrBoxDetail.LocationState;
if (CallStore.StorageState != StoreState)
{
//更新数据库中的对应监控的储位状态信息
AGVServerDAccess.UpdateStorageState(StoreState, -1, CallStore.ID);
CallStore.StorageState = StoreState;
}
return(true);
#endregion
}
catch (Exception ex)
{
LogHelper.WriteCallBoxLog("处理呼叫器监控异常:" + ex.Message);
return(false);
}
}
/// <summary>
/// 处理呼叫盒放行逻辑
/// </summary>
/// <returns></returns>
private bool HandleCallBoxRelease(CallBoxInfo CallBox, CallBoxDetail CurrBoxDetail, int BtnID)
{
try
{
#region 处理呼叫器放行逻辑
//接收到按钮盒放行命令
//取出按钮对应监控的储位
StorageInfo CallStore = CoreData.StorageList.FirstOrDefault(q => q.ID == CurrBoxDetail.LocationID);
if (CallStore == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位");
return(false);
}
//然后将停靠监控储位地标上的AGV允许放行
string WaintLandCode = CallStore.LankMarkCode;
if (string.IsNullOrEmpty(WaintLandCode))
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位地标");
return(false);
}
CarInfo WaitCar = CoreData.CarList.FirstOrDefault(p => p.CurrSite == Convert.ToInt32(WaintLandCode));
if (WaitCar == null)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位地标上没有小车");
return(false);
}
if (string.IsNullOrEmpty(WaitCar.ExcuteTaksNo))
{
LogHelper.WriteCreatTaskLog("放行地标上的小车没有可执行任务");
return(false);
}
AGVServerDAccess.ReleaseCarByCallBox(WaitCar.ExcuteTaksNo, WaitCar.CurrSite.ToString());
return(true);
#endregion
}
catch (Exception ex)
{
LogHelper.WriteCallBoxLog("处理呼叫器放行异常:" + ex.Message);
return(false);
}
}
private bool HandleCallBoxMonitor(CallBoxInfo CallBox, CallBoxDetail CurrBoxDetail, int staragestate, string codes = "")
{
try
{
lock (lockstorage)
{
#region 处理监控功能
//处理监控功能
//监控功能则为更新储位的状态
DataTable dtstorage = CoreData.dbOperator.LoadDatas("QueryAllStore");
CoreData.StorageList = DataToObject.TableToEntity <StorageInfo>(dtstorage);
StorageInfo CallStore = CoreData.StorageList.FirstOrDefault(q => q.ID == CurrBoxDetail.LocationID);
if (CallStore == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位");
return(false);
}
int StoreState = staragestate;
if (CallStore.StorageState != StoreState)
{
//更新数据库中的对应监控的储位状态信息
AGVServerDAccess.UpdateStorageState(StoreState, -1, CallStore.ID);
if (!string.IsNullOrEmpty(codes))
{
//更新备注
AGVServerDAccess.UpdteStorageRemark(CallStore.ID, codes);
}
//更新储位的名称 逗号分隔
CallStore.StorageState = StoreState;
CallStore.Remark = codes;
}
return(true);
#endregion
}
}
catch (Exception ex)
{
DelegateState.InvokeDispatchStateEvent(ex.Message);
return(false);
}
}
private void btnOK_Click(object sender, EventArgs e)
{
try
{
string UserID = this.txtUserID.Text.Trim();
string Pass = txtPass.Text.Trim();
if (!string.IsNullOrEmpty(UserID) && !string.IsNullOrEmpty(Pass))
{
UserInfo user = AGVServerDAccess.LoadUserInfo(UserID, Pass);
if (user == null)
{
MessageBox.Show("用户名或密码不正确!");
return;
}
else
{
IList <SysOprButtonToCategory> LoadUserOprBtns = AGVServerDAccess.LoadUserOprBtn(UserID);
CurrentLogin.CurrentUser = user;
CurrentLogin.SysOprButtons = LoadUserOprBtns;
this.DialogResult = DialogResult.OK;
}
}
else
{
if (string.IsNullOrEmpty(UserID))
{
txtUserID.Focus();
}
if (string.IsNullOrEmpty(Pass))
{
txtPass.Focus();
}
}
}
catch (Exception ex)
{ MessageBox.Show(ex.Message); }
}
/// <summary>
/// 处理呼叫盒呼叫
/// </summary>
/// <param name="CallBoxID">呼叫盒ID</param>
/// <param name="BtnID">按钮ID</param>
/// <returns></returns>
private bool HandleCallBoxCall(CallBoxInfo CallBox, CallBoxDetail CurrBoxDetail, int BtnID)
{
try
{
#region 处理呼叫逻辑
//加载是否启用储位状态
string IsUserStoreState = CoreData.SysParameter["IsUserStoreState"].ToString();
if (string.IsNullOrEmpty(IsUserStoreState))
{
IsUserStoreState = "否";
}
int CallBoxID = CallBox.CallBoxID;
IList <TaskConfigDetail> TaskConfigDetails = AGVClientDAccess.load_TaskDetail(CurrBoxDetail.TaskConditonCode);
if (TaskConfigDetails == null && (TaskConfigDetails != null && TaskConfigDetails.Count <= 0))
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "任务信息");
return(false);
}
//开始根据任务配置信息创建任务
StorageInfo CallStore = CoreData.StorageList.FirstOrDefault(q => q.ID == CurrBoxDetail.LocationID);
if (CallStore == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位");
return(false);
}
//验证当前按钮盒下是否存在未完成的任务
if (AGVSimulationDAccess.ChekAllowCreatTask(CallBoxID, CallStore.LankMarkCode, BtnID) > 0)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫存在未完成任务,请稍后再试!");
return(false);
}
//组装任务信息
string dispatchNo = Guid.NewGuid().ToString();
DispatchTaskInfo TaskInfo = new DispatchTaskInfo();
TaskInfo.dispatchNo = dispatchNo;
TaskInfo.TaskState = 0;
TaskInfo.CallLand = CallStore.LankMarkCode;
TaskInfo.stationNo = CallBoxID;
TaskInfo.CallID = BtnID;
TaskInfo.taskType = 0;
//创建任务明细
int DetailID = 1;
int PrePutType = -1;
foreach (TaskConfigDetail item in TaskConfigDetails)
{
//通过任务任务配置明细寻找目标地标
StorageInfo ArmStore = null;
LogHelper.WriteCallBoxLog("呼叫储位为：" + item.ArmOwnArea.ToString());
if (item.ArmOwnArea == -1)
{
ArmStore = CallStore;
LogHelper.WriteCallBoxLog("呼叫储位地标为：" + CallStore.LankMarkCode);
}
else
{
if (IsUserStoreState == "否")
{
ArmStore = CoreData.StorageList.FirstOrDefault(p => p.OwnArea == item.ArmOwnArea && p.StorageState == item.StorageState && p.MaterielType == item.MaterialType);
}
else
{
ArmStore = CoreData.StorageList.FirstOrDefault(p => p.OwnArea == item.ArmOwnArea && p.StorageState == item.StorageState && p.MaterielType == item.MaterialType && p.LockState == 0);
}
}
if (ArmStore == null)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫,目的储位不存在[原因:不存在或被占用]");
return(false);
}
//再通过配置任务号来处理必经地标
IList <TaskConfigMustPass> ConfigMustPasses = AGVServerDAccess.LoadTaskMustPass(item.TaskConditonCode, item.DetailID);
if (ConfigMustPasses != null && ConfigMustPasses.Count > 0)
{
////如果配置的必经地标则需要产生任务经过必经地标
foreach (TaskConfigMustPass MustPassItem in ConfigMustPasses)
{
foreach (IOActionInfo Action in MustPassItem.MustPassIOAction)
{
IOActionInfo CurrIOActionInfo = AGVServerDAccess.LoadAllIOAction(Action.ActionID);
if (CurrIOActionInfo == null)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫,必经地标中的IO动作" + Action.ActionID.ToString() + "档案信息不存在");
continue;
}
DispatchTaskDetail newTaskDetail = new DispatchTaskDetail();
newTaskDetail.dispatchNo = dispatchNo;
newTaskDetail.DetailID = DetailID;
newTaskDetail.LandCode = MustPassItem.MustPassLandCode;
newTaskDetail.IsAllowExcute = Action.IsPass;
newTaskDetail.IsSensorStop = 0;
newTaskDetail.OperType = -1;
newTaskDetail.IsWait = Action.IsWait;
newTaskDetail.WaitTime = Action.WaitTime;
newTaskDetail.TaskConditonCode = MustPassItem.TaskConditonCode;
newTaskDetail.TaskConfigDetailID = item.DetailID;
TaskInfo.TaskDetail.Add(newTaskDetail);
}
}
//foreach (TaskConfigMustPass MustPassItem in ConfigMustPasses)
//{
// //根据配置的IO动作ID加载对应的IO动作明细信息
// IOActionInfo CurrIOActionInfo = AGVServerDAccess.LoadAllIOAction(MustPassItem.Action);
// if (CurrIOActionInfo == null)
// {
// LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫,必经地标中的IO动作" + MustPassItem.Action.ToString() + "档案信息不存在");
// continue;
// }
// //找到必经地标中的IO动作后组装任务体
// DispatchTaskDetail dispathDetail_MustPas = new DispatchTaskDetail();
// dispathDetail_MustPas.dispatchNo = dispatchNo;
// dispathDetail_MustPas.DetailID = DetailID;
// dispathDetail_MustPas.LandCode = MustPassItem.MustPassLandCode;
// dispathDetail_MustPas.OperType = -1;
// dispathDetail_MustPas.IsAllowExcute = CurrIOActionInfo.IsWait;
// dispathDetail_MustPas.PutType = -1;
// dispathDetail_MustPas.IOActionID = CurrIOActionInfo.ActionID;
// TaskInfo.TaskDetail.Add(dispathDetail_MustPas);
// DetailID += 1;
//}//结束循环处理必经地标配置
}
//如果没有必经地标或者添加完必经地标后需要继续添加后续的任务配置明细
DispatchTaskDetail dispathDetail_TaskConfig = new DispatchTaskDetail();
dispathDetail_TaskConfig.dispatchNo = dispatchNo;
dispathDetail_TaskConfig.DetailID = DetailID;
dispathDetail_TaskConfig.LandCode = ArmStore.LankMarkCode;
dispathDetail_TaskConfig.OperType = item.Action;
dispathDetail_TaskConfig.IsAllowExcute = item.IsWaitPass;
dispathDetail_TaskConfig.PassType = item.PassType;
if (PrePutType == -1)
{
dispathDetail_TaskConfig.PutType = ArmStore.StorageState;
}
else
{
dispathDetail_TaskConfig.PutType = PrePutType;
}
dispathDetail_TaskConfig.IsSensorStop = item.IsSensorStop;
TaskInfo.TaskDetail.Add(dispathDetail_TaskConfig);
PrePutType = ArmStore.StorageState;
DetailID += 1;
}//结束循环处理任务配置
//循环组装完任务信息后保存到数据库
if (TaskInfo != null && TaskInfo.TaskDetail.Count > 0)
{
AGVServerDAccess.CreatTaskInfo(TaskInfo, IsUserStoreState == "是" ? true : false);
}
return(true);
#endregion
}
catch (Exception ex)
{
LogHelper.WriteCallBoxLog("处理呼叫器呼叫异常:" + ex.Message);
return(false);
}
}
private void HandleCallBoxRequest(object obj, CallBoxInfo CallBox)
{
try
{
//lock (HandCallBoxlockObj)
//{
LogHelper.WriteCallBoxLog("接受到:" + CallBox.CallBoxID.ToString() + "号按钮盒信息");
NetEventArgs einfo = obj as NetEventArgs;
if (einfo == null)
{
return;
}
LogHelper.WriteCallBoxLog("开始解析按钮值");
List <byte> Message = einfo.MesContent;
AppSession ClientSession = einfo.Session;
int CallBoxID = CallBox.CallBoxID;
//本次被开的按钮
List <int> CallBoxBtnList = new List <int>();
//本次被关闭的按钮
List <int> CallBoxBtnCloseList = new List <int>();
//int ButID = (int)Message[3];
//if (ButID == 0) { return; }
//CallBoxBtnList.Add(ButID);
////最多支持9个按键
//string BtnPortNextStr = Convert.ToString(Message[4], 2).PadLeft(8, '0');
//LogHelper.WriteCallBoxLog(BtnPortNextStr);
//if (BtnPortNextStr.Substring(7, 1) == "1")
//{ CallBoxBtnList.Add(9); }
string BtnPortStr = Convert.ToString(Message[3], 2).PadLeft(8, '0');
if (BtnPortStr.Substring(0, 1) == "1")
{
CallBoxBtnList.Add(8);
}
else
{
CallBoxBtnCloseList.Add(8);
}
if (BtnPortStr.Substring(1, 1) == "1")
{
CallBoxBtnList.Add(7);
}
else
{
CallBoxBtnCloseList.Add(7);
}
if (BtnPortStr.Substring(2, 1) == "1")
{
CallBoxBtnList.Add(6);
}
else
{
CallBoxBtnCloseList.Add(6);
}
if (BtnPortStr.Substring(3, 1) == "1")
{
CallBoxBtnList.Add(5);
}
else
{
CallBoxBtnCloseList.Add(5);
}
if (BtnPortStr.Substring(4, 1) == "1")
{
CallBoxBtnList.Add(4);
}
else
{
CallBoxBtnCloseList.Add(4);
}
if (BtnPortStr.Substring(5, 1) == "1")
{
CallBoxBtnList.Add(3);
}
else
{
CallBoxBtnCloseList.Add(3);
}
if (BtnPortStr.Substring(6, 1) == "1")
{
CallBoxBtnList.Add(2);
}
else
{
CallBoxBtnCloseList.Add(2);
}
if (BtnPortStr.Substring(7, 1) == "1")
{
CallBoxBtnList.Add(1);
}
else
{
CallBoxBtnCloseList.Add(1);
}
//记忆上次被开的按钮
string OldCallBoxBtnList = CallBox.CallBoxBtnList;
CallBox.CallBoxBtnList = string.Join(",", CallBoxBtnList.Select(p => p));
CallBoxInfo BoxInfo = AGVServerDAccess.LoadAllCallBoxByID(CallBoxID);
IList <CallBoxDetail> BoxDetails = AGVServerDAccess.LoadCallBoxDetails(CallBoxID);
//根据按钮盒信息处理业务逻辑
foreach (int BtnID in CallBoxBtnList)
{
CallBoxDetail CurrBoxDetail = BoxDetails.FirstOrDefault(p => p.CallBoxID == CallBoxID && p.ButtonID == BtnID);
if (CurrBoxDetail.OperaType != 3)
{
LightContrl(ClientSession, BtnID, 1);
}
//抽取当前按钮盒当前按钮对应的操作类型
LogHelper.WriteCallBoxLog("接受到" + CallBox.CallBoxID + "号按钮盒按键" + BtnID);
//处理按钮盒的过程为：
//1.接受到按钮盒的请求后,产生任务后将对应的按钮灯点亮
//2.当有车领取了该任务后将按钮等熄灭
#region 根据配置生成任务
if (BoxInfo == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "档案信息");
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
if (BoxDetails == null || (BoxDetails != null && BoxDetails.Count <= 0))
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "明细档案信息1");
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
if (CurrBoxDetail == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "明细档案信息2");
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
if (CurrBoxDetail.OperaType == 0)//呼叫
{
bool HandleCallResult = HandleCallBoxCall(CallBox, CurrBoxDetail, BtnID);
if (!HandleCallResult)
{
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
else
{
Thread.Sleep(3000);
LightContrl(ClientSession, BtnID, 0);
}
}
else if (CurrBoxDetail.OperaType == 1)//监控
{
bool HandleCallBoxMonitorResult = HandleCallBoxMonitor(CallBox, CurrBoxDetail, BtnID);
if (!HandleCallBoxMonitorResult)
{
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
else
{
Thread.Sleep(3000);
LightContrl(ClientSession, BtnID, 0);
}
}
else if (CurrBoxDetail.OperaType == 3)//传感器监控
{
if (string.IsNullOrEmpty(OldCallBoxBtnList) || (!string.IsNullOrEmpty(OldCallBoxBtnList) && !OldCallBoxBtnList.Contains(BtnID.ToString())))
{
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
else
{
double FilterTime = 0;
//传感器监控需要增加滤波功能
string FilterTimeStr = CoreData.SysParameter["FilterTime"].ToString();
if (!string.IsNullOrEmpty(FilterTimeStr))
{
try
{
FilterTime = Convert.ToDouble(FilterTimeStr);
}
catch
{ }
}
ArrayList keyList = new ArrayList(hs_PreReciveSensorTime.Keys);
if (!keyList.Contains(CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()))
{
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
else
{
DateTime PreReciveSensorTime = Convert.ToDateTime(hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()]);
double SpanTime = (DateTime.Now - PreReciveSensorTime).TotalSeconds;
if (FilterTime <= SpanTime)
{
HandleCallBoxMonitor(CallBox, CurrBoxDetail, BtnID);
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
else
{
continue;
}
}
}
}
else//确认放行
{
bool HandleCallBoxReleaseResult = HandleCallBoxRelease(CallBox, CurrBoxDetail, BtnID);
if (!HandleCallBoxReleaseResult)
{
Thread.Sleep(1000 * 3);
LightContrl(ClientSession, BtnID, 0);
continue;
}
else
{
Thread.Sleep(3000);
LightContrl(ClientSession, BtnID, 0);
}
}
#endregion
//Thread.Sleep(3000);
//LightContrl(ClientSession, BtnID, 0);
}
///将传感器没有物品时需要将对应储位状态清空
foreach (int BtnID in CallBoxBtnCloseList)
{
if (BoxDetails == null || (BoxDetails != null && BoxDetails.Count <= 0))
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "明细档案信息4");
continue;
}
CallBoxDetail CurrBoxDetail = BoxDetails.FirstOrDefault(p => p.CallBoxID == CallBoxID && p.ButtonID == BtnID);
if (CurrBoxDetail == null)
{
//LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "明细档案信息");
continue;
}
if (CurrBoxDetail.OperaType == 3)//传感器监控
{
ArrayList keyList = new ArrayList(hs_PreReciveSensorTime.Keys);
if (!keyList.Contains(CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()))
{
if (string.IsNullOrEmpty(OldCallBoxBtnList) || (!string.IsNullOrEmpty(OldCallBoxBtnList) && OldCallBoxBtnList.Contains(BtnID.ToString())))
{
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
}
else
{
double FilterTime = 0;
//传感器监控需要增加滤波功能
string FilterTimeStr = CoreData.SysParameter["FilterTime"].ToString();
if (!string.IsNullOrEmpty(FilterTimeStr))
{
try
{
FilterTime = Convert.ToDouble(FilterTimeStr);
}
catch
{ }
}
keyList = new ArrayList(hs_PreReciveSensorTime.Keys);
if (!keyList.Contains(CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()))
{
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
else
{
DateTime PreReciveSensorTime = Convert.ToDateTime(hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()]);
double SpanTime = (DateTime.Now - PreReciveSensorTime).TotalSeconds;
if (FilterTime <= SpanTime)
{
CurrBoxDetail.LocationState = 0;
HandleCallBoxMonitor(CallBox, CurrBoxDetail, BtnID);
hs_PreReciveSensorTime[CurrBoxDetail.CallBoxID.ToString() + "," + CurrBoxDetail.ButtonID.ToString()] = DateTime.Now;
}
else
{
continue;
}
}
}
}
}
//}
}
catch (Exception ex)
{ LogHelper.WriteCallBoxLog("呼叫器处理异常:" + ex.Message); }
}
/// <summary>
/// 处理呼叫器呼叫任务
/// </summary>
/// <param name="CallBox"></param>
/// <param name="CurrBoxDetail"></param>
/// <param name="BtnID"></param>
/// <returns></returns>
private bool HandleCallBoxCall(CallBoxInfo CallBox, CallBoxDetail CurrBoxDetail, int BtnID)
{
try
{
lock (lockstorage)
{
#region 处理呼叫逻辑
//加载是否启用储位状态
string IsUserStoreState = CoreData.SysParameter["IsUserStoreState"].ToString();
if (string.IsNullOrEmpty(IsUserStoreState))
{
IsUserStoreState = "否";
}
int CallBoxID = CallBox.CallBoxID;
IList <TaskConfigDetail> TaskConfigDetails = AGVClientDAccess.load_TaskDetail(CurrBoxDetail.TaskConditonCode);
if (TaskConfigDetails == null && (TaskConfigDetails != null && TaskConfigDetails.Count <= 0))
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "任务信息");
return(false);
}
DataTable dtstorage = CoreData.dbOperator.LoadDatas("QueryAllStore");
CoreData.StorageList = DataToObject.TableToEntity <StorageInfo>(dtstorage);
//开始根据任务配置信息创建任务
StorageInfo CallStore = CoreData.StorageList.FirstOrDefault(q => q.ID == CurrBoxDetail.LocationID);
if (CallStore == null)
{
LogHelper.WriteCallBoxLog("未配置按钮盒" + CallBox.CallBoxID.ToString() + "对应的监控储位");
return(false);
}
//验证当前按钮盒下是否存在未完成的任务
if (AGVSimulationDAccess.ChekAllowCreatTask(CallBoxID, CallStore.LankMarkCode, CurrBoxDetail.ButtonID) > 0)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫存在未完成任务,请稍后再试!");
return(false);
}
//验证当前按钮盒下是否存在未完成的任务
if (AGVSimulationDAccess.ChekAllowCreatTask2(CallBoxID, CallStore.LankMarkCode, CurrBoxDetail.ButtonID) > 0)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxID.ToString() + "对应呼叫存在未完成任务 未回写的任务,请稍后再试!");
return(false);
}
AreaInfo callarea = CoreData.AllAreaList.FirstOrDefault(p => p.OwnArea == CallStore.OwnArea);
if (callarea != null && callarea.MaxTaskCount > 0)
{
if (AGVSimulationDAccess.ChekAllowCreatTask3(callarea.OwnArea) >= callarea.MaxTaskCount)
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxIP.ToString() + " 地址" + CurrBoxDetail.DBAddress + " 对应的区域任务数量达到最大，不产生任务");
return(false);
}
}
if (!string.IsNullOrEmpty(CallStore.StorageName))
{
LogHelper.WriteCallBoxLog("按钮盒" + CallBox.CallBoxIP.ToString() + " 地址" + CurrBoxDetail.DBAddress + "对应储位未启用");
return(false);
}
//组装任务信息
string dispatchNo = Guid.NewGuid().ToString();
DispatchTaskInfo TaskInfo = new DispatchTaskInfo();
TaskInfo.dispatchNo = dispatchNo;
TaskInfo.TaskState = 0;
TaskInfo.CallLand = CallStore.LankMarkCode;
TaskInfo.stationNo = CallBoxID;
TaskInfo.CallID = BtnID;
TaskInfo.taskType = 0;
TaskInfo.OwerArea = CallStore.OwnArea;
//创建任务明细
int DetailID = 1;
int PrePutType = -1;
foreach (TaskConfigDetail item in TaskConfigDetails)
{
//通过任务任务配置明细寻找目标地标
StorageInfo ArmStore = null;
LogHelper.WriteCallBoxLog("呼叫储位为：" + item.ArmOwnArea.ToString());
if (item.ArmOwnArea == -1)
{
ArmStore = CallStore;
LogHelper.WriteCallBoxLog("呼叫储位地标为：" + CallStore.LankMarkCode);
}
else
{
if (IsUserStoreState == "否")
{
ArmStore = CoreData.StorageList.FirstOrDefault(p => p.OwnArea == item.ArmOwnArea && p.StorageState == item.StorageState && p.MaterielType == item.MaterialType);
}
else
{
ArmStore = CoreData.StorageList.FirstOrDefault(p => p.OwnArea == item.ArmOwnArea && p.StorageState == item.StorageState && p.MaterielType == item.MaterialType && p.LockState == 0);
}
}
if (ArmStore == null)
{
LogHelper.WriteCallBoxLog(string.Format("按钮盒{0} 地址：{1} BtnID{2} 对应呼叫,目的储位不存在[原因:不存在或被占用]", CallBox.CallBoxID, CurrBoxDetail.DBAddress, CurrBoxDetail.ButtonID));
return(false);
}
#region 用
//再通过配置任务号来处理必经地标
IList <TaskConfigMustPass> ConfigMustPasses = AGVServerDAccess.LoadTaskMustPass(item.TaskConditonCode, item.DetailID);
if (ConfigMustPasses != null && ConfigMustPasses.Count > 0)
{
////如果配置的必经地标则需要产生任务经过必经地标
foreach (TaskConfigMustPass MustPassItem in ConfigMustPasses)
{
foreach (IOActionInfo Action in MustPassItem.MustPassIOAction)
{
IOActionInfo CurrIOActionInfo = AGVServerDAccess.LoadAllIOAction(Action.ActionID);
if (CurrIOActionInfo == null)
{
LogHelper.WriteCallBoxLog("按钮器" + CallBox.CallBoxID.ToString() + "对应呼叫,必经地标中的IO动作" + Action.ActionID.ToString() + "档案信息不存在");
continue;
}
DispatchTaskDetail newTaskDetail = new DispatchTaskDetail();
newTaskDetail.dispatchNo = dispatchNo;
newTaskDetail.DetailID = DetailID;
newTaskDetail.LandCode = MustPassItem.MustPassLandCode;
newTaskDetail.IsAllowExcute = Action.IsPass;
newTaskDetail.IsSensorStop = 0;
newTaskDetail.OperType = -1;
newTaskDetail.IsWait = Action.IsWait;
newTaskDetail.WaitTime = Action.WaitTime;
newTaskDetail.TaskConditonCode = MustPassItem.TaskConditonCode;
newTaskDetail.TaskConfigDetailID = item.DetailID;
TaskInfo.TaskDetail.Add(newTaskDetail);
}
}
}
#endregion
//如果没有必经地标或者添加完必经地标后需要继续添加后续的任务配置明细
DispatchTaskDetail dispathDetail_TaskConfig = new DispatchTaskDetail();
dispathDetail_TaskConfig.dispatchNo = dispatchNo;
dispathDetail_TaskConfig.DetailID = DetailID;
dispathDetail_TaskConfig.LandCode = ArmStore.LankMarkCode;
dispathDetail_TaskConfig.StorageID = ArmStore.ID;
if (!string.IsNullOrEmpty(ArmStore.Remark))
{
TaskInfo.GoodsInfo = ArmStore.Remark;
}
dispathDetail_TaskConfig.OperType = item.Action;
dispathDetail_TaskConfig.IsAllowExcute = item.IsWaitPass;
dispathDetail_TaskConfig.PassType = item.PassType;
dispathDetail_TaskConfig.IsNeedCallBack = item.IsNeedCallBack;
dispathDetail_TaskConfig.IsCallGoods = item.IsCallGoods;
if (PrePutType == -1)
{
dispathDetail_TaskConfig.PutType = ArmStore.StorageState;
}
else
{
dispathDetail_TaskConfig.PutType = PrePutType;
}
dispathDetail_TaskConfig.IsSensorStop = item.IsSensorStop;
TaskInfo.TaskDetail.Add(dispathDetail_TaskConfig);
PrePutType = ArmStore.StorageState;
DetailID += 1;
}//结束循环处理任务配置
//循环组装完任务信息后保存到数据库
if (TaskInfo != null && TaskInfo.TaskDetail.Count > 0)
{
AGVServerDAccess.CreatTaskInfo(TaskInfo, IsUserStoreState == "是" ? true : false);
}
return(true);
#endregion
}
}
catch (Exception ex)
{
DelegateState.InvokeDispatchStateEvent(ex.Message);
return(false);
}
}