public LJM_Frm()
{
Class39.k1QjQlczC5Jf5();
base..ctor();
base.Shown += this.LJM_Frm_Shown;
base.Activated += this.LJM_Frm_Activated;
base.FormClosed += this.LJM_Frm_FormClosed;
LJM_Frm.smethod_0(this);
this.InitializeComponent();
}
public void TcLJM()
{
LJM_Frm ljm_Frm = new LJM_Frm();
ljm_Frm.ShowDialog();
checked
{
if (ljm_Frm.DialogResult == DialogResult.OK)
{
string text = ljm_Frm.TextBox1.Text;
text = text.Replace("\\", "/");
text = text.Replace(" ", "/");
text = text.Replace(",", "/");
text = text.Replace("，", "/");
text = text.Replace("、", "/");
int num = Strings.InStr(text, "/", CompareMethod.Binary);
long num2 = (long)Math.Round(unchecked (Conversion.Val(text.Substring(0, checked (num - 1))) * 5.0));
long num3 = (long)Math.Round(unchecked (Conversion.Val(text.Substring(num, checked (text.Length - num))) * 5.0));
Point3d point = CAD.GetPoint("选择插入点: ");
Point3d point3d;
if (!(point == point3d))
{
Point3d pointXY = CAD.GetPointXY(point, (double)num2 / 2.0, (double)num3 / 2.0);
Point3d pointXY2 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)num3 / 2.0);
Point3d pointXY3 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)(0L - num3) / 2.0);
Point3d pointXY4 = CAD.GetPointXY(point, (double)num2 / 2.0, (double)(0L - num3) / 2.0);
Point3d pointAngle = CAD.GetPointAngle(pointXY, 250.0, -135.0);
Point3d point3d2 = CAD.GetPointAngle(pointXY2, 250.0, -45.0);
Point3d pointAngle2 = CAD.GetPointAngle(pointXY3, 250.0, 45.0);
Point3d pointAngle3 = CAD.GetPointAngle(pointXY4, 250.0, 135.0);
Point3d pointXY5 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)(0L - num3) / 2.0);
CAD.AddPlinePxy(pointXY5, (double)num2, (double)num3, 0.0, "");
text = JG.ReplaceGJ(ljm_Frm.TextBox2.Text);
num = NF.InStr_N(text, "/");
Point3d[] array;
Point3d[] array2;
if (num == 1)
{
short num4 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num5 = (short)Math.Round(Conversion.Val(text.Substring((int)(num4 - 9), 1)));
short num6 = (short)Math.Round(Conversion.Val(text.Substring((int)num4, 1)));
array = new Point3d[(int)(unchecked (num5 + num6) - 1 + 1)];
array2 = new Point3d[(int)(num5 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num5 + num6) - 1)] = pointAngle;
Class36.smethod_16(array[(int)(unchecked (num5 + num6) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num5 - 2 + 1));
short num7 = 1;
short num8 = num5 - 2;
num4 = num7;
for (;;)
{
short num9 = num4;
short num10 = num8;
if (num9 > num10)
{
break;
}
array[(int)num4] = CAD.GetPointXY(array[0], (double)(num * (int)num4), 0.0);
Class36.smethod_16(array[(int)num4], 50.0, "墙柱纵筋");
array2[(int)(num4 - 1)] = array[(int)num4];
unchecked
{
num4 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num6 - 1));
short num11 = num5;
short num12 = unchecked (num5 + num6) - 1;
num4 = num11;
for (;;)
{
short num13 = num4;
short num10 = num12;
if (num13 > num10)
{
break;
}
array[(int)num4] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num4 - num5))), -150.0);
Class36.smethod_16(array[(int)num4], 50.0, "墙柱纵筋");
unchecked
{
num4 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
else if (num == 2)
{
short num14 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num15 = (short)Math.Round(Conversion.Val(text.Substring((int)(num14 - 9), 1)));
short num16 = (short)Math.Round(Conversion.Val(text.Substring((int)num14, 1)));
short num17 = (short)Math.Round(Conversion.Val(text.Substring((int)(num14 + 9), 1)));
array = new Point3d[(int)(unchecked (num15 + num16 + num17) - 1 + 1)];
array2 = new Point3d[(int)(num15 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num15 + num16 + num17) - 1)] = pointAngle;
Class36.smethod_16(array[(int)(unchecked (num15 + num16 + num17) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num15 - 2 + 1));
short num18 = 1;
short num19 = num15 - 2;
num14 = num18;
for (;;)
{
short num20 = num14;
short num10 = num19;
if (num20 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)num14), 0.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
array2[(int)(num14 - 1)] = array[(int)num14];
unchecked
{
num14 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num16 - 1));
short num21 = num15;
short num22 = unchecked (num15 + num16) - 1;
num14 = num21;
for (;;)
{
short num23 = num14;
short num10 = num22;
if (num23 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num14 - num15))), -150.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
unchecked
{
num14 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num17 - 1));
short num24 = unchecked (num15 + num16);
short num25 = unchecked (num15 + num16 + num17) - 1;
num14 = num24;
for (;;)
{
short num26 = num14;
short num10 = num25;
if (num26 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num14 - num15 - num16))), -300.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
unchecked
{
num14 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
else
{
short num27 = (short)Strings.InStr(text, "+", CompareMethod.Binary);
short num28;
if (num27 > 0)
{
num28 = (short)Math.Round(unchecked (Conversion.Val(text.Substring((int)(checked (num27 - 9)), 1)) + Conversion.Val(text.Substring((int)num27, 1))));
}
else
{
num28 = (short)Math.Round(Conversion.Val(text.Substring(0, 1)));
}
array = new Point3d[(int)(num28 - 1 + 1)];
array2 = new Point3d[(int)(num28 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(num28 - 1)] = pointAngle;
Class36.smethod_16(array[(int)(num28 - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num28 - 2 + 1));
short num29 = 1;
short num30 = num28 - 2;
num27 = num29;
for (;;)
{
short num31 = num27;
short num10 = num30;
if (num31 > num10)
{
break;
}
array[(int)num27] = CAD.GetPointXY(array[0], (double)(num * (int)num27), 0.0);
Class36.smethod_16(array[(int)num27], 50.0, "墙柱纵筋");
array2[(int)(num27 - 1)] = array[(int)num27];
unchecked
{
num27 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
text = JG.ReplaceGJ(ljm_Frm.TextBox3.Text);
num = NF.InStr_N(text, "/");
if (num == 1)
{
short num32 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num33 = (short)Math.Round(Conversion.Val(text.Substring((int)(num32 - 9), 1)));
short num34 = (short)Math.Round(Conversion.Val(text.Substring((int)num32, 1)));
array = new Point3d[(int)(unchecked (num34 + num33) - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num34 + num33) - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(unchecked (num34 + num33) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num34 - 2 + 1));
short num35 = 1;
short num36 = num34 - 2;
num32 = num35;
for (;;)
{
short num37 = num32;
short num10 = num36;
if (num37 > num10)
{
break;
}
array[(int)num32] = CAD.GetPointXY(array[0], (double)(num * (int)num32), 0.0);
Class36.smethod_16(array[(int)num32], 50.0, "墙柱纵筋");
unchecked
{
num32 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num33 - 1));
short num38 = num34;
short num39 = unchecked (num34 + num33) - 1;
num32 = num38;
for (;;)
{
short num40 = num32;
short num10 = num39;
if (num40 > num10)
{
break;
}
array[(int)num32] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num32 - num34))), 150.0);
Class36.smethod_16(array[(int)num32], 50.0, "墙柱纵筋");
unchecked
{
num32 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
else if (num == 2)
{
short num41 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num42 = (short)Math.Round(Conversion.Val(text.Substring((int)(num41 - 9), 1)));
short num43 = (short)Math.Round(Conversion.Val(text.Substring((int)num41, 1)));
short num44 = (short)Math.Round(Conversion.Val(text.Substring((int)(num41 + 9), 1)));
array = new Point3d[(int)(unchecked (num44 + num43 + num42) - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num44 + num43 + num42) - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(unchecked (num44 + num43 + num42) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num44 - 2 + 1));
short num45 = 1;
short num46 = num44 - 2;
num41 = num45;
for (;;)
{
short num47 = num41;
short num10 = num46;
if (num47 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)num41), 0.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num43 - 1));
short num48 = num44;
short num49 = unchecked (num44 + num43) - 1;
num41 = num48;
for (;;)
{
short num50 = num41;
short num10 = num49;
if (num50 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num41 - num44))), 150.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num42 - 1));
short num51 = unchecked (num44 + num43);
short num52 = unchecked (num44 + num43 + num42) - 1;
num41 = num51;
for (;;)
{
short num53 = num41;
short num10 = num52;
if (num53 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num41 - num44 - num43))), 300.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
else
{
short num54 = (short)Strings.InStr(text, "+", CompareMethod.Binary);
short num55;
if (num54 > 0)
{
num55 = (short)Math.Round(unchecked (Conversion.Val(text.Substring((int)(checked (num54 - 9)), 1)) + Conversion.Val(text.Substring((int)num54, 1))));
}
else
{
num55 = (short)Math.Round(Conversion.Val(text.Substring(0, 1)));
}
array = new Point3d[(int)(num55 - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(num55 - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(num55 - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num55 - 2 + 1));
short num56 = 1;
short num57 = num55 - 2;
num54 = num56;
for (;;)
{
short num58 = num54;
short num10 = num57;
if (num58 > num10)
{
break;
}
array[(int)num54] = CAD.GetPointXY(array[0], (double)(num * (int)num54), 0.0);
Class36.smethod_16(array[(int)num54], 50.0, "墙柱纵筋");
unchecked
{
num54 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
object obj = CAD.CreateTextStyle("Tc_尺寸标注", "txt.shx", "hztxt.Shx", 0.7);
string dimStyleName = "Tc_Dim100";
object obj2 = obj;
ObjectId objectId;
ObjectId dimID = CAD.CreateDimStyle(dimStyleName, (obj2 != null) ? ((ObjectId)obj2) : objectId, 100, 1.0, false, -1.0);
unchecked
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 500.0, 0.0);
CAD.AddLineDim(pointXY2, pointXY3, pointXY5, 0.2, dimID, -1.0);
pointXY5 = CAD.GetPointXY(point, 0.0, (double)(checked (0L - num3)) / 2.0 - 1000.0);
CAD.AddLineDim(pointXY3, pointXY4, pointXY5, 0.2, dimID, -1.0);
string string_;
if (Conversions.ToDouble(ljm_Frm.TextBox7.Text) == 0.0)
{
string_ = "%%p0.000";
}
else
{
string_ = ljm_Frm.TextBox7.Text;
}
if (Operators.CompareString(ljm_Frm.Button1.Text, "顶部标高", false) == 0)
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 650.0, (double)num3 / 2.0);
Class36.smethod_81(pointXY5, 2, 1.0);
pointXY5 = CAD.GetPointXY(pointXY5, -300.0, 350.0);
Class36.smethod_57(string_, pointXY5, 300.0, 2, 0, "STANDARD", 0.0);
}
else
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 650.0, (double)(checked (0L - num3)) / 2.0);
Class36.smethod_81(pointXY5, 3, 1.0);
pointXY5 = CAD.GetPointXY(pointXY5, -300.0, -350.0);
Class36.smethod_57(string_, pointXY5, 300.0, 2, 3, "STANDARD", 0.0);
}
}
if (Operators.CompareString(ljm_Frm.TextBox5.Text, "", false) != 0)
{
text = JG.ReplaceGJ(ljm_Frm.TextBox5.Text);
num = (int)Math.Round(Conversion.Val(text.Substring(0, 1)));
if (num % 2 == 0)
{
num = (int)Math.Round((double)num / 2.0);
text = Conversions.ToString(2) + text.Substring(1, text.Length - 1);
short num59 = 0;
short num60 = (short)(num - 1);
short num61 = num59;
unchecked
{
for (;;)
{
short num62 = num61;
short num10 = num60;
if (num62 > num10)
{
break;
}
array = new Point3d[3];
array[0] = CAD.GetPointXY(pointAngle2, 0.0, checked ((double)(num3 - 354L) / (double)(num + 1)) * (double)(checked (num61 + 1)));
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[2] = CAD.GetPointXY(pointAngle3, 0.0, checked ((double)(num3 - 354L) / (double)(num + 1)) * (double)(checked (num61 + 1)));
Class36.smethod_16(array[2], 50.0, "墙柱纵筋");
Class36.smethod_7(array[0], array[2]);
array[1] = Class36.smethod_46(array[0], array[2]);
array[1] = CAD.GetPointXY(array[1], 0.0, 74.0);
Class36.smethod_83(array, 300L, text, 1, 100.0);
num61 += 1;
}
}
}
}
else
{
num = 2;
}
pointAngle = CAD.GetPointAngle(pointXY2, 100.0, -45.0);
point3d2 = CAD.GetPointAngle(pointXY4, 100.0, 135.0);
Class36.smethod_9(pointAngle, point3d2);
array = new Point3d[]
{
CAD.GetPointXY(point3d2, 0.0, (double)(num3 - 354L) / unchecked ((double)num / 2.0 + 1.0) / 2.0)
};
text = JG.ReplaceGJ(ljm_Frm.TextBox4.Text);
Class36.smethod_83(array, 0L, text, 1, 100.0);
num = Strings.InStr(text, "(", CompareMethod.Binary);
if (num != 0)
{
short num63 = Conversions.ToShort(text.Substring(num, 1));
if (num63 == 3)
{
Class36.smethod_7(array2[0], CAD.GetPointXY(array2[0], 0.0, (double)(0L - num3 + 354L)));
}
else if (num63 == 4)
{
pointAngle = CAD.GetPointAngle(array2[0], 150.0, 135.0);
point3d2 = CAD.GetPointXY(array2[0], unchecked (array2[1].X - array2[0].X), (double)(0L - num3 + 354L));
point3d2 = CAD.GetPointAngle(point3d2, 150.0, -45.0);
Class36.smethod_9(pointAngle, point3d2);
}
}
pointXY5 = CAD.GetPointXY(point, -400.0, unchecked ((double)(checked (0L - num3)) / 2.0 - 2500.0));
Class36.smethod_6(pointXY5, "L1", 100.0, "1:20");
}
}
}
}
