/// <summary>
/// 设置相位方向 表
/// </summary>
/// <param name="lptd"></param>
/// <returns></returns>
public static Message SetPhaseToDirec(List<PhaseToDirec> lptd)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message msg = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.PHASE_DIREC_BYTE_SIZE * Define.PHASE_DIREC_RESULT_LEN + Define.SET_PHASE_DIREC_RESPONSE.Length+1];
Stream s = new MemoryStream();
s.Write(Define.SET_PHASE_DIREC_RESPONSE, 0, Define.SET_PHASE_DIREC_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.PHASE_DIREC_RESULT_LEN));
foreach (PhaseToDirec ptd in lptd)
{
byte id = ptd.ucId;
s.WriteByte(id);
byte phase = ptd.ucPhase;
s.WriteByte(phase);
byte op = ptd.ucOverlapPhase;
s.WriteByte(op);
byte rc = ptd.ucRoadCnt;
s.WriteByte(rc);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
msg.flag = true;
msg.msg = "设置方向属性成功！";
msg.obj = "PhaseToDirec";
}
else
{
msg.flag = false;
msg.msg = "设置方向属性失败！";
msg.obj = "PhaseToDirec";
}
}
return msg;
}
/// <summary>
/// 检测器第二块板 9- 16通道设置方法
/// </summary>
/// <param name="se"></param>
/// <param name="n"></param>
/// <returns></returns>
public static Message SetSensitivityAdv22(byte[] se, Node n)
{
Message m = new Message();
byte[] hex = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
Stream s = new MemoryStream();
bool b = false;
s.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
s.WriteByte(se[0]);
s.WriteByte(se[1]);
s.WriteByte(se[2]);
s.WriteByte(se[3]);
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
hex[3] = 0x0c;
hex[4] = 0x01;
b = Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
}
if (b == true)
{
m.flag = true;
m.msg = "检测器1板1-8通道灵敏度设置成功";
m.obj = "Detecotr";
}
else
{
m.flag = false;
m.msg = "检测器1板1-8通道灵敏度设置失败";
m.obj = "Detecotr";
}
return m;
}
/// <summary>
/// 设置检测器灵敏 度
/// </summary>
/// <param name="borad"></param>
/// <param name="se"></param>
/// <param name="n"></param>
/// <returns></returns>
public static Message SetSensitivityAdv(byte[] se, Node n)
{
Message m = new Message();
byte[] hex11 = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
byte[] hex12 = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
byte[] hex21 = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
byte[] hex22 = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
Stream s11 = new MemoryStream();
s11.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
s11.WriteByte(se[0]);
s11.WriteByte(se[1]);
s11.WriteByte(se[2]);
s11.WriteByte(se[3]);
s11.Position = 0;
int count11 = s11.Read(hex11, 0, hex11.Length);
if (count11 > 0)
{
hex11[3] = 0x0b;
hex11[4] = 0x00;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex11);
}
Stream s12 = new MemoryStream();
s12.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
s12.WriteByte(se[4]);
s12.WriteByte(se[5]);
s12.WriteByte(se[6]);
s12.WriteByte(se[7]);
s12.Position = 0;
int count12 = s12.Read(hex12, 0, hex12.Length);
if(count12>0)
{
hex12[3] = 0x0c;
hex12[4] = 0x00;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex12);
}
Stream s21 = new MemoryStream();
s21.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
s21.WriteByte(se[8]);
s21.WriteByte(se[9]);
s21.WriteByte(se[10]);
s21.WriteByte(se[11]);
s21.Position = 0;
int count21 = s21.Read(hex21, 0, hex21.Length);
if (count21 > 0)
{
hex21[3] = 0x0b;
hex21[4] = 0x01;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex21);
}
Stream s22 = new MemoryStream();
s22.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
s22.WriteByte(se[12]);
s22.WriteByte(se[13]);
s22.WriteByte(se[14]);
s22.WriteByte(se[15]);
s22.Position = 0;
int count22 = s22.Read(hex22, 0, hex22.Length);
if (count22 > 0)
{
hex22[3] = 0x0c;
hex22[4] = 0x01;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex22);
}
return m;
}
/// <summary>
/// 检测器灵敏度数值第二块板15-16通道
/// </summary>
/// <param name="b"></param>
/// <param name="n"></param>
/// <returns></returns>
public static Message SetSensityvityDig6(byte[] b, Node n)
{
Message m = new Message();
byte[] hex = new byte[Define.SET_DETECTOR_SENSITYVITY_DIG_2_15_16.Length + 7];
Stream s = new MemoryStream();
s.Write(Define.SET_DETECTOR_SENSITYVITY_DIG_2_15_16, 0, Define.SET_DETECTOR_SENSITYVITY_DIG_2_15_16.Length);
s.Write(b, 0, b.Length);
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
bool bl = false;
if (count > 0)
{
bl = Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
}
if (bl == true)
{
m.obj = "Detector";
m.flag = true;
m.msg = "检测器数值保存成功";
}
else
{
m.obj = "Detector";
m.flag = false;
m.msg = "检测器数值保存失败";
}
return m;
}
/// <summary>
/// 设置检测器灵敏 度
/// </summary>
/// <param name="borad"></param>
/// <param name="se"></param>
/// <param name="n"></param>
/// <returns></returns>
public static Message SetSensitivity(int borad, byte se,Node n)
{
Message m = new Message();
byte[] hex = new byte[Define.DETECTOR_SENSITIVITY.Length + 4];
Stream s = new MemoryStream();
s.Write(Define.DETECTOR_SENSITIVITY, 0, Define.DETECTOR_SENSITIVITY.Length);
byte sen = se;
sen = (byte)(sen | se << 4);
s.WriteByte(sen);
s.WriteByte(sen);
s.WriteByte(sen);
s.WriteByte(sen);
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if(count > 0)
{
if (borad == 1)
{
hex[3] = 0x0b;
hex[4] = 0x00;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
hex[3] = 0x0c;
hex[4] = 0x00;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
}
if (borad == 2)
{
hex[3] = 0x0b;
hex[4] = 0x01;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
hex[3] = 0x0c;
hex[4] = 0x01;
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
// Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
}
}
return m;
}
public static Message SetTiming(DateTime dt)
{
Message m = new Message();
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
double idt = Utils.Utils.ConvertDateTimeInt(dt);
DateTime dttt = Utils.Utils.ConvertIntDateTime(idt);
byte[] ba = System.BitConverter.GetBytes(idt);
byte[] bb = ba.Reverse().ToArray<byte>();
byte[] hex = new byte[Define.TSC_DEV_TIMING.Length + 4];
Stream s = new MemoryStream();
s.Write(Define.TSC_DEV_TIMING, 0, Define.TSC_DEV_TIMING.Length);
s.Write(bb, 0, bb.Length);
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
bool b = false;
if(count >0)
{
b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
}
if(b == true)
{
m.flag = true;
m.msg = "校时成功！";
m.obj = "Timing";
}
else
{
m.flag = true;
m.msg = "校时失败！";
m.obj = "Timing";
}
return m;
}
/// <summary>
/// 设置震荡频率
/// </summary>
/// <param name="sf"></param>
/// <param name="n"></param>
/// <returns></returns>
public static Message SetOscillatorFrequency(byte sf ,Node n)
{
Message m = new Message();
byte[] hex = new byte[Define.DETECTOR_OSCILLATOR_FREQUENCY.Length + 4];
Stream s = new MemoryStream();
s.Write(Define.DETECTOR_OSCILLATOR_FREQUENCY, 0, Define.DETECTOR_OSCILLATOR_FREQUENCY.Length);
byte sfc = sf;
sfc = (byte)(sf | sfc << 2);
sfc = (byte)(sf | sfc << 2);
sfc = (byte)(sf | sfc << 2);
s.WriteByte(sfc);
s.WriteByte(sfc);
s.WriteByte(sfc);
s.WriteByte(sfc);
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if(count>0)
{
Udp.sendUdpNoReciveData(n.sIpAddress, n.iPort, hex);
}
return m;
}
public static Message SetStagePattern16(List<StagePattern> lsp)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message m = new Message();
////字节 长度，需要加2 ，因为。数据长度需要2个字段表示，二维数组。
byte[] hex = new byte[Define.STAGE_PATTERN_BYTE_SIZE_16 * (Define.STAGEPATTERN_RESULT_LEN * Define.STAGE_RESULT_LEN) + Define.SET_STAGEPATTERN_RESPONSE.Length + 2];
Stream s = new MemoryStream();
s.Write(Define.SET_STAGEPATTERN_RESPONSE, 0, Define.SET_STAGEPATTERN_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.STAGEPATTERN_RESULT_LEN));
s.WriteByte(Convert.ToByte(Define.STAGE_RESULT_LEN));
foreach (StagePattern sp in lsp)
{
byte id = sp.ucStagePatternId;
s.WriteByte(id);
byte stageno = sp.ucStageNo;
s.WriteByte(stageno);
byte[] ap = System.BitConverter.GetBytes(sp.usAllowPhase);
ap = ap.Reverse().ToArray();
s.Write(ap, 0, ap.Length);
byte green = sp.ucGreenTime;
s.WriteByte(green);
byte yellow = sp.ucYellowTime;
s.WriteByte(yellow);
byte red = sp.ucRedTime;
s.WriteByte(red);
byte opt = sp.ucOption;
s.WriteByte(opt);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存阶段配时方案数据成功！";
m.obj = "Pattern";
}
else
{
m.flag = false;
m.msg = "保存阶段配时方案数据失败！";
m.obj = "Pattern";
}
}
return m;
}
/// <summary>
/// 设置跟随相位
/// </summary>
/// <param name="lop"></param>
/// <returns></returns>
public static Message SetOverlapPhase(List<OverlapPhase> lop)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message m = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.OVERLAPPHASE_BYTE_SIZE * Define.OVERLAPPHASE_RESULT_LEN + Define.SET_OVERLAPPHASE_RESPONSE.Length+ 1];
Stream s = new MemoryStream();
s.Write(Define.SET_OVERLAPPHASE_RESPONSE, 0, Define.SET_OVERLAPPHASE_RESPONSE.Length);
s.WriteByte(Convert.ToByte(lop.Count));
foreach (OverlapPhase op in lop)
{
byte id = op.ucId;
s.WriteByte(id);
byte ot = op.ucOperateType;
s.WriteByte(ot);
byte ipl = op.ucIncludePhaseLen;
s.WriteByte(ipl);
byte[] ip = op.ucIncludePhase;
s.Write(ip, 0, ip.Length);
byte cpl = op.ucCorrectPhaseLen;
s.WriteByte(cpl);
byte[] cp = op.ucCorrectPhase;
s.Write(cp, 0, cp.Length);
byte green = op.ucTailGreen;
s.WriteByte(green);
byte yellow = op.ucTailYellow;
s.WriteByte(yellow);
byte red = op.ucTailRed;
s.WriteByte(red);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存跟随相位数据成功！";
m.obj = "Pattern";
}
else
{
m.flag = false;
m.msg = "保存跟随相位数据失败！";
m.obj = "Pattern";
}
}
return m;
}
public static Message SetChannel(List<Channel> lc)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message m = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.CHANNEL_BYTE_SIZE*Define.CHANNEL_RESULT_LEN+Define.SET_CHANNEL_RESPONSE.Length + 1];
Stream s = new MemoryStream();
s.Write(Define.SET_CHANNEL_RESPONSE, 0, Define.SET_CHANNEL_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.CHANNEL_RESULT_LEN));
foreach (Channel c in lc)
{
byte id = c.ucId;
s.WriteByte(id);
byte sp = c.ucSourcePhase;
s.WriteByte(sp);
byte af = c.ucFlashAuto;
s.WriteByte(af);
byte type = c.ucType;
s.WriteByte(type);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存通道数据成功！";
m.obj = "Channel";
}
else
{
m.flag = false;
m.msg = "保存通道数据失败！";
m.obj = "Channel";
}
}
return m;
}
public static Message SetPattern(List<Pattern> lp)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message m = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.PATTERN_BYTE_SIZE * lp.Count + Define.SET_PATTERN_RESPONSE.Length + 1 ];
Stream s = new MemoryStream();
s.Write(Define.SET_PATTERN_RESPONSE, 0, Define.SET_PATTERN_RESPONSE.Length);
s.WriteByte(Convert.ToByte(lp.Count));
foreach(Pattern p in lp)
{
byte id = p.ucPatternId;
s.WriteByte(id);
byte cyc = p.ucCycleTime;
s.WriteByte(cyc);
byte r = p.ucOffset;
s.WriteByte(r);
byte coor = p.ucCoorPhase;
s.WriteByte(coor);
byte stageid = p.ucStagePatternId;
s.WriteByte(stageid);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存配时方案数据成功！";
m.obj = "Pattern";
}
else
{
m.flag = false;
m.msg = "保存配时方案数据失败！";
m.obj = "Pattern";
}
}
return m;
}
public static Message SetSchedule(List<Schedule> ls)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message m = new Message();
//字节 长度，需要加2 ，因为。数据长度需要2个字段表示。
byte[] hex = new byte[Define.SCHEDULE_BYTE_SIZE * (Define.SCHEDULE_RESULT_LEN*Define.SCHEDULE_EVENT_RESULT_LEN) + Define.SET_SCHEDULE_RESPONSE.Length + 2];
Stream s = new MemoryStream();
s.Write(Define.SET_SCHEDULE_RESPONSE, 0, Define.SET_SCHEDULE_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.SCHEDULE_RESULT_LEN));
s.WriteByte(Convert.ToByte(Define.SCHEDULE_EVENT_RESULT_LEN));
foreach (Schedule sc in ls)
{
byte id = sc.ucId;
s.WriteByte(id);
byte eventid = sc.ucEventId;
s.WriteByte(eventid);
byte hour = sc.ucHour;
s.WriteByte(hour);
byte min = sc.ucMin;
s.WriteByte(min);
byte ctrl = sc.ucCtrl;
s.WriteByte(ctrl);
byte patterntime = sc.ucTimePatternId;
s.WriteByte(patterntime);
byte opt = sc.ucAuxOut;
s.WriteByte(opt);
byte sp = sc.ucSpecialOut;
s.WriteByte(sp);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存时段数据成功！";
m.obj = "Schedule";
}
else
{
m.flag = false;
m.msg = "保存时段数据失败！";
m.obj = "Schedule";
}
}
return m;
}
public static Message SetPlanByCalendar(List<Plan> lp)
{
Message m = new Message();
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
byte[] hex = new byte[Define.PLAN_BYTE_SIZE * lp.Count + Define.SET_PLAN_RESPONSE.Length + 1];
Stream s = new MemoryStream();
s.Write(Define.SET_PLAN_RESPONSE, 0, Define.SET_PLAN_RESPONSE.Length);
s.WriteByte(Convert.ToByte(lp.Count));
foreach (Plan p in lp)
{
byte id = p.ucId;
s.WriteByte(id);
byte[] month = System.BitConverter.GetBytes(p.usMonthFlag);
month = month.Reverse().ToArray();
s.Write(month, 0, month.Length);
byte week = p.ucWeekFlag;
s.WriteByte(week);
byte[] day = System.BitConverter.GetBytes(p.ulDayFlag);
day = day.Reverse().ToArray();
s.Write(day, 0, day.Length);
byte schedule = p.ucScheduleId;
s.WriteByte(schedule);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
m.flag = true;
m.msg = "保存时基数据成功！";
m.obj = "Plan";
}
else
{
m.flag = false;
m.msg = "保存时基数据失败！";
m.obj = "Plan";
}
}
return m;
}
public static Message SetDetector(List<Detector> ld)
{
Message msg = new Message();
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.DETECTOR_BYTE_SIZE*Define.DETECTOR_RESULT_LEN + Define.SET_DETECTOR_RESPONSE.Length +1];
Stream s = new MemoryStream();
s.Write(Define.SET_DETECTOR_RESPONSE,0,Define.SET_DETECTOR_RESPONSE.Length);
s.WriteByte(Convert.ToByte(ld.Count));
foreach (Detector d in ld)
{
byte id = d.ucDetectorId;
s.WriteByte(id);
byte phaseid = d.ucPhaseId;
s.WriteByte(phaseid);
byte type = d.ucDetFlag;
s.WriteByte(type);
byte dirc = d.ucDirect;
s.WriteByte(dirc);
byte time = d.ucValidTime;
s.WriteByte(time);
byte opt = d.ucOptionFlag;
s.WriteByte(opt);
byte[] flow = System.BitConverter.GetBytes(d.usSaturationFlow);
flow = flow.Reverse().ToArray();
s.Write(flow, 0, flow.Length);
byte occupy = d.ucSaturationOccupy;
s.WriteByte(occupy);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
msg.flag = true;
msg.msg = "发送检测器数据成功！";
msg.obj = "Detector";
}
else
{
msg.flag = false;
msg.msg = "发送检测器数据失败！";
msg.obj = "Detector";
}
}
return msg;
}
public static Message SetCollision(List<Collision> lc)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message msg = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.COLLISION_BYTE_SIZE*Define.COLLISION_RESULT_LENGTH+Define.SET_COLLISION_RESPONSE.Length + 1];
Stream s = new MemoryStream();
s.Write(Define.SET_COLLISION_RESPONSE,0,Define.SET_COLLISION_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.COLLISION_RESULT_LENGTH));
foreach (Collision c in lc)
{
byte id = c.ucPhaseId;
s.WriteByte(id);
byte[] flag = System.BitConverter.GetBytes(c.ucCollisionFlag);
flag = flag.Reverse().ToArray();
s.Write(flag, 0, flag.Length);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0 )
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
msg.flag = true;
msg.msg = "设置相位冲突属性成功！";
msg.obj = "Collision";
}
else
{
msg.flag = false;
msg.msg = "设置相位冲突属性失败！";
msg.obj = "Collision";
}
}
return msg;
}
public static Message SetPhase(List<Phase> lp)
{
TscData t = Utils.Utils.GetTscDataByApplicationCurrentProperties();
Message msg = new Message();
//字节 长度，需要加1 ，因为。数据长度需要一个字段表示。
byte[] hex = new byte[Define.PHASE_BYTE_SIZE * Define.PHASE_RESULT_LEN + Define.SET_PHASE_RESPONSE.Length + 1];
Stream s = new MemoryStream();
s.Write(Define.SET_PHASE_RESPONSE, 0, Define.SET_PHASE_RESPONSE.Length);
s.WriteByte(Convert.ToByte(Define.PHASE_RESULT_LEN));
foreach (Phase ptd in lp)
{
byte id = ptd.ucId;
s.WriteByte(id);
byte pg = ptd.ucPedestrianGreen;
s.WriteByte(pg);
byte pc = ptd.ucPedestrianClear;
s.WriteByte(pc);
byte mg = ptd.ucMinGreen;
s.WriteByte(mg);
byte gdu = ptd.ucGreenDelayUnit;
s.WriteByte(gdu);
byte mg1 = ptd.ucMaxGreen1;
s.WriteByte(mg1);
byte mg2 = ptd.ucMaxGreen2;
s.WriteByte(mg2);
byte fg = ptd.ucFixedGreen;
s.WriteByte(fg);
byte gf = ptd.ucGreenFlash;
s.WriteByte(gf);
byte type = ptd.ucType;
s.WriteByte(type);
byte opt = ptd.ucOption;
s.WriteByte(opt);
byte ext = ptd.ucExtend;
s.WriteByte(ext);
}
s.Position = 0;
int count = s.Read(hex, 0, hex.Length);
if (count > 0)
{
bool b = Udp.sendUdpNoReciveData(t.Node.sIpAddress, t.Node.iPort, hex);
if (b)
{
msg.flag = true;
msg.msg = "设置相位属性成功！";
msg.obj = "Phase";
}
else
{
msg.flag = false;
msg.msg = "设置相位属性失败！";
msg.obj = "Phase";
}
}
return msg;
}
