//TODO: need to add debug, nodebug catching
void FinishedCompile(bool bErrored)
{
PrintDebugLine("Finished opC++ Build.");
//handle post-build operations
CurrentThread = null;
EnableCompileButtons();
PostEvent = "";
if (bErrored)
{
return;
}
if (CurrentMode != null)
{
// if the command was from the toolbar, we can customize the post build event using settings
if (!CurrentMode.bIntercepted)
{
Options options = OptionsManager.GetGlobalOptions().GetGlobalConfiguration().Options;
if (CurrentMode.Action == CompileTypes.Build)
{
if (CurrentMode.Selection == SelectionTypes.Solution)
{
//TODO: grab the command
PostEvent = options.PostBuildSolution.Value;
}
else if (CurrentMode.Selection == SelectionTypes.Project)
{
//TODO: grab the command
PostEvent = options.PostBuildProject.Value;
}
}
else if (CurrentMode.Action == CompileTypes.Clean)
{
//TODO: grab the command
PostEvent = options.PostCleanSolution.Value;
}
}
else if (CurrentMode.Action == CompileTypes.Debug)
{
PostEvent = "Debug.Start";
}
else if (CurrentMode.Action == CompileTypes.NoDebug)
{
PostEvent = "Debug.StartWithoutDebugging";
}
else
{
//setup the post-build event
if (CurrentMode.Action == CompileTypes.Build)
{
PostEvent = "Build.Build";
}
else if (CurrentMode.Action == CompileTypes.Rebuild)
{
PostEvent = "Build.Rebuild";
}
else if (CurrentMode.Action == CompileTypes.Clean)
{
PostEvent = "Build.Clean";
}
if (CurrentMode.Selection == SelectionTypes.Project)
{
PostEvent += "Selection";
}
else if (CurrentMode.Selection == SelectionTypes.ProjectOnly)
{
PostEvent += "OnlyProject";
}
else if (CurrentMode.Selection == SelectionTypes.Solution)
{
PostEvent += "Solution";
}
}
}
if (PostEvent.Length != 0)
{
App().ExecuteCommand(PostEvent, "");
}
}
void StartCompile(CompileMode mode)
{
// a compile is running already
if (IsCompiling())
{
//TODO: should halt compiling really
return;
//CurrentThread.Stop();
}
if (mode.bIntercepted)
{
Options options = OptionsManager.GetGlobalOptions().GetGlobalConfiguration().Options;
bool bExtendCommands = options.ExtendCommands.Value;
if (!bExtendCommands)
{
return;
}
}
if (IsVSCompiling())
{
//cancel it
App().ExecuteCommand("Build.Cancel", "");
}
// activate the output pane...
GetOutputPane().Clear();
ActivateOutputPane();
// ok, lets attempt to start compiling now.
CurrentThread = null;
PostEvent = "";
// no solution loaded
DTE2 app = App();
Solution solution = app.Solution;
if (solution == null)
{
return;
}
// first save all the open files - this is a global setting
SaveOpenFiles();
List <Project> Projects;
// find the selections we need (projects)
if (mode.Selection == SelectionTypes.Solution)
{
Projects = ProjectUtility.GetSolutionProjects();
}
else if (mode.Selection == SelectionTypes.Project)
{
Projects = ProjectUtility.GetActiveProjects();
}
else // if (mode.Selection == SelectionTypes.ProjectOnly)
{
Projects = ProjectUtility.GetActiveProjectOnly();
}
//
// Mode Arguments
//
// clean : send it -clean
// rebuild : send it -force
// build : none...
string ModeArguments = "";
if (mode.Action == CompileTypes.Rebuild)
{
ModeArguments += "-force";
}
else if (mode.Action == CompileTypes.Clean)
{
ModeArguments += "-clean";
}
//else if Debug || NoDebug || Build ... no additional needed
//TODO: need the global options path
string GlobalArguments = "-dependencies \"" + Paths.GetGlobalOptionsFilename() + "\"";
//no projects to compile
if (Projects.Count == 0)
{
return;
}
List <CommandSetting> CommandSettings = new List <CommandSetting>();
int numprojects = Projects.Count;
for (int ip = 0; ip < numprojects; ip++)
{
Project project = Projects[ip];
string ActiveConfiguration = ProjectUtility.ProjectActiveConfiguration(project);
List <VCFile> ohfiles = ProjectUtility.GetOhFiles(project);
// does it contain active oh files? if not skip it.
ProjectUtility.FilterActiveFiles(ref ohfiles, ActiveConfiguration);
if (ohfiles.Count == 0)
{
continue;
}
// are the project settings set to enable opcpp?
bool bProjectEnabled = true;
if (!bProjectEnabled)
{
continue;
}
//3. do we have .doh files in the project?
List <VCFile> dohfiles = ProjectUtility.GetDohFiles(project);
ProjectUtility.FilterActiveFiles(ref dohfiles, ActiveConfiguration);
// if (dohfiles.Count == 0)
// continue;
//fetch the project doh files from the global/project doh settings
List <string> ProjectDohFiles = new List <string>();
// if(ProjectDohFiles.Count + dohfiles.Count == 0)
// {
// //print a message "Project has oh files but no dialect was found or specified"
// continue;
// }
//now build the settings
CommandSetting setting = new CommandSetting();
setting.Project = project;
setting.WorkingDir = StringUtility.RLeft(project.FileName, "\\");
//build the oh files list from the arguments
//build the doh files list from the arguments
string ohfilestring = "";
for (int i = 0; i < ohfiles.Count; i++)
{
VCFile file = ohfiles[i];
ohfilestring += '"';
ohfilestring += file.FullPath;
ohfilestring += '"';
if (i + 1 < ohfiles.Count)
{
ohfilestring += ',';
}
}
string dohfilestring = "";
for (int i = 0; i < dohfiles.Count; i++)
{
VCFile file = dohfiles[i];
dohfilestring += '"';
dohfilestring += file.FullPath;
dohfilestring += '"';
if (i + 1 < dohfiles.Count)
{
dohfilestring += ',';
}
}
for (int i = 0; i < ProjectDohFiles.Count; i++)
{
dohfilestring += '"';
dohfilestring += ProjectDohFiles[i];
dohfilestring += '"';
if (i + 1 < ProjectDohFiles.Count)
{
dohfilestring += ',';
}
}
string FileArguments = "";
if (ohfilestring.Length > 0)
{
FileArguments += " -oh " + ohfilestring;
}
if (dohfilestring.Length > 0)
{
FileArguments += " -doh " + dohfilestring;
}
// fetch the global + overloaded project arguments
CommandLineInfo info = OptionsManager.GetCommandLineInfo(project);
setting.ExePath = info.ExecutablePath;
FileArguments += " -dependencies \"" + Paths.GetProjectOptionsFilename(project) + "\"";
if (setting.ExePath == "")
{
LogCompile("Error: opCpp exe path is undefined, please define in global and/or project settings");
return;
}
string ProjectArguments = info.Arguments;
string MacroArguments = FileArguments + " " + ProjectArguments + " " + ModeArguments + " " + GlobalArguments;
if (opBeta.IsBeta)
{
MacroArguments += " -beta";
}
setting.Arguments = Paths.ResolveVisualStudioMacros(project, MacroArguments);
//verify the macros worked...
Regex findmacros = new Regex("$\\(*.\\)");
Match result = findmacros.Match(setting.Arguments);
if (result.Success)
{
string foundstring = setting.Arguments.Substring(result.Index, result.Length);
LogCompile("Error: bad macro found in settings - " + foundstring);
return;
}
CommandSettings.Add(setting);
}
//no commands to execute
if (CommandSettings.Count == 0)
{
// CurrentMode = null;
// FinishedCompile(false);
return;
}
//execute commands
CurrentMode = mode;
CurrentThread = new opCppThread(CommandSettings);
CurrentThread.OnReadLine = LogCompile;
CurrentThread.OnEnd = FinishedCompile;
CurrentThread.Start();
}