internal static RasterExtractionResult SummariseRaster(IGeoDataset pClippingPolygon, ExtractionLayerConfig pExtractionLayerConfig)
{
// set the analysis extent to be that of the polygon
ServerLogger logger = new ServerLogger();
logger.LogMessage(ServerLogger.msgType.debug, "SummariseCategoricalRaster", 99, "Categorical raster clip beginning..");
IEnvelope tAnalysisExtent = pClippingPolygon.Extent;
bool pCategoricalSummary = pExtractionLayerConfig.ExtractionType==ExtractionTypes.CategoricalRaster;
IGeoDataset pRasterToClip = pExtractionLayerConfig.LayerDataset;
IRasterAnalysisEnvironment tRasterAnalysisEnvironment = new RasterAnalysisClass();
object tAnalysisEnvelopeCastToObject = (System.Object)tAnalysisExtent;
// object tAnotherBizarreMissingObject = Type.Missing;
object tSnapObject = (System.Object)pRasterToClip;
tRasterAnalysisEnvironment.SetExtent(esriRasterEnvSettingEnum.esriRasterEnvValue,
ref tAnalysisEnvelopeCastToObject, ref tSnapObject);
tRasterAnalysisEnvironment.SetAsNewDefaultEnvironment();
// extract the subset of the raster
IExtractionOp2 tExtractionOp = new RasterExtractionOpClass();
// note we want to base the extraction on a raster (in an IGeoDataset) rather than an IPolygon.
// That's because the catchment polygon may be multipart, and the operation doesn't work with multipart.
// Also the polygon has a max of 1000 vertices.
// And raster mask extraction is probably faster since the
// polygon is converted internally to a grid anyway.
IGeoDataset tClipped;
if (pRasterToClip as IRaster != null)
{
logger.LogMessage(ServerLogger.msgType.debug, "SummariseRaster", 99,
"Input was in raster form, using directly to clip...");
tClipped = tExtractionOp.Raster(pRasterToClip, pClippingPolygon);
}
else
{
// POLYGON VERSION: tExtractionOp.Polygon(pClipRaster,pPolygon,true)
// sometimes we need to be able to pass in a polygon but rather than using the polygon
// method we'll manually convert to a mask raster to avoid the issues above
// It would save work to do this once for each request rather than repeat the conversion
// for each layer - but we might want a different environment (snap extent etc) for each.
logger.LogMessage(ServerLogger.msgType.debug, "SummariseCategoricalRaster", 99,
"Converting input polygon to mask raster for clip...");
IRasterConvertHelper tConvertPolygonToRaster = new RasterConvertHelperClass();
// convert it to a raster with the same cell size as the input
IRasterProps tRst = pRasterToClip as IRasterProps;
IPnt tRstCellSize = tRst.MeanCellSize();
double x = tRstCellSize.X;
double y = tRstCellSize.Y;
double cellSize = Math.Round(Math.Min(x, y), 0);
object tCellSizeAsObjectForNoGoodReason = (System.Object)cellSize;
tRasterAnalysisEnvironment.SetCellSize(esriRasterEnvSettingEnum.esriRasterEnvValue,
ref tCellSizeAsObjectForNoGoodReason);
IGeoDataset tPolyAsRast =
tConvertPolygonToRaster.ToRaster1(pRasterToClip, "GRID", tRasterAnalysisEnvironment)
as IGeoDataset;
logger.LogMessage(ServerLogger.msgType.debug, "SummariseCategoricalRaster", 99,
"...done, proceeding with clip");
tClipped = tExtractionOp.Raster(pRasterToClip, tPolyAsRast);
}
// now we have the clipped raster we need to summarise it differently depending on whether
// we want a summary by category/value (for categorical rasters) or by stats (for float rasters)
Dictionary<string, double> tResults;
if (pCategoricalSummary)
{
tResults = WatershedDetailExtraction.SummariseRasterCategorically(tClipped);
if (tResults.Count > 100)
{
// sanity check: don't sum up more than 100 different values
tResults = WatershedDetailExtraction.SummariseRasterStatistically(tClipped);
pCategoricalSummary = false;
}
}
else
{
tResults = WatershedDetailExtraction.SummariseRasterStatistically(tClipped);
}
tRasterAnalysisEnvironment.RestoreToPreviousDefaultEnvironment();
return new RasterExtractionResult(pExtractionLayerConfig.ParamName, pCategoricalSummary, tResults);
//return tResults;
}
public void Construct(IPropertySet props)
{
try
{
logger.LogMessage(ServerLogger.msgType.infoDetailed, "Construct", 8000, "Watershed SOE constructor running");
object tProperty = null;
m_CanDoWatershed = true;
// IPropertySet doesn't have anything like a trygetvalue method
// so if we don't know if a property will be present we have to just try getting
// it and if there is an exception assumes it wasn't there
try {
tProperty = props.GetProperty("FlowAccLayer");
if (tProperty as string == "None")
{
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: Flow accumulation layer set to 'None'. No watershed functionality.");
m_CanDoWatershed = false;
//throw new ArgumentNullException();
}
else
{
m_FlowAccLayerName = tProperty as string;
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: found definition for Flow Accumulation layer: " + m_FlowAccLayerName);
}
}
catch{
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: Flow accumulation layer not set. No watershed functionality.");
m_CanDoWatershed = false;
//throw new ArgumentNullException();
}
try {
tProperty = props.GetProperty("FlowDirLayer");
if (tProperty as string == "None")
{
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: Flow direction layer set to 'None'. No watershed functionality.");
m_CanDoWatershed = false;
}
else
{
m_FlowDirLayerName = tProperty as string;
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: found definition for Flow direction layer: " + m_FlowDirLayerName);
}
}
catch {
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: Flow direction layer not set. No watershed functionality.");
m_CanDoWatershed = false;
}
try
{
tProperty = props.GetProperty("ExtentFeatureLayer") as string;
if (tProperty as string =="None"){
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 8000,
"WSH: No extent features configured. Extent may still be passed as input");
}
else
{
m_ExtentFeatureLayerName = tProperty as string;
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: found definition for Extent Feature layer: " + m_ExtentFeatureLayerName);
}
}
catch {
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: no definition for extent feature layers found. Extent may still be passed as input");
}
try
{
tProperty = props.GetProperty("ReadConfigFromMap");
if (tProperty == null || tProperty as string != "False")
{
m_BuildLayerParamsFromMap = true;
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: layer parameters will be built from map document layers");
}
else
{
m_BuildLayerParamsFromMap = false;
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: layer parameters would be read from properties file but this is NOT IMPLEMENTED YET ");
// TODO: add code to read in LayerConfiguration parameter and parse it
}
}
catch
{
m_BuildLayerParamsFromMap = true;
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 8000,
"WSH: no property found for ReadConfigFromMap; "+
"layer parameters will be built from map document layers");
}
}
catch (Exception e)
{
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, "WSH: Properties constructor threw an exception");
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, e.Message);
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, e.ToString());
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, e.TargetSite.Name);
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000, e.StackTrace);
}
try
{
// get the datasets associated with the configured inputs to watershed delineation.
// Also note the other layers: we will make all others available for extraction
// but need to note the data type and how the layer name should translate into a REST operation
// parameter. This information will be stored in an ExtractionLayerConfig opbject for each layer
// We only need to do this at startup not each time
IMapServer3 mapServer = (IMapServer3)serverObjectHelper.ServerObject;
string mapName = mapServer.DefaultMapName;
IMapLayerInfo layerInfo;
IMapLayerInfos layerInfos = mapServer.GetServerInfo(mapName).MapLayerInfos;
ILayerDescriptions layerDescriptions = mapServer.GetServerInfo(mapName).DefaultMapDescription.LayerDescriptions;
IMapServerDataAccess dataAccess = (IMapServerDataAccess)mapServer;
int c = layerInfos.Count;
int acc_layerIndex=0;
int dir_layerIndex=0;
int ext_layerIndex=0;
//Dictionary<int,string> other_layerIndices = new Dictionary<int,string>();
List<string> tAllParams = new List<string>();
for (int i=0;i<c;i++)
{
layerInfo = layerInfos.get_Element(i);
if(m_CanDoWatershed && layerInfo.Name == m_FlowAccLayerName)
{
acc_layerIndex = i;
}
else if (m_CanDoWatershed && layerInfo.Name == m_FlowDirLayerName)
{
dir_layerIndex = i;
}
else if (m_CanDoWatershed && m_ExtentFeatureLayerName != null && layerInfo.Name == m_ExtentFeatureLayerName)
{
ext_layerIndex = i;
}
else if (m_BuildLayerParamsFromMap)
// note the else if is deliberately arranged so that layers used for watershed extraction
// won't be exposed as extractable
{
// Types appear to be "Raster Layer", "Feature Layer", and "Group Layer"
logger.LogMessage(ServerLogger.msgType.debug,
"Construct", 8000,
"WSH: processing extractable map layer " + layerInfo.Name + " at ID " +
layerInfo.ID + " of type " + layerInfo.Type);
if (layerInfo.Type == "Raster Layer" || layerInfo.Type == "Feature Layer")
{
string tName = layerInfo.Name;
string tDesc = layerInfo.Description;
if (tName.IndexOf(':') == -1 && tDesc.IndexOf(':') == -1)
{
// fail if any of the map layers except the ones used for the catchment definition
// don't have a name or description starting with 6 or less characters followed by :
logger.LogMessage(ServerLogger.msgType.error, "Construct", 8000,
" Watershed SOE warning: could determine output parameter string for layer " + tName +
" and it will not be available for extraction. " +
" Ensure that either the layer name or description starts with an ID for the " +
" service parameter name to be exposed, max 6 characters and separated by ':'" +
" e.g. 'LCM2K:Land Cover Map 2000'");
continue;
}
else if (tName.IndexOf(':') > 5 && tDesc.IndexOf(':') > 5)
{
logger.LogMessage(ServerLogger.msgType.error, "Construct", 8000,
" Watershed SOE warning: read output parameter string for layer " + tName +
" but it was too long." +
" Ensure that either the layer name or description starts with an ID for the " +
" service parameter name to be exposed, max 6 characters and separated by ':'" +
" e.g. 'LCM2K:Land Cover Map 2000'. Layer will not be available for extraction.");
continue;
}
string tParamName;
string tProcessedName;
if (tName.IndexOf(':') != -1)
{
tParamName = tName.Substring(0, tName.IndexOf(':'));
tProcessedName = tName.Substring(tName.IndexOf(':')+1).Trim();
}
else
{
tParamName = tDesc.Substring(0, tDesc.IndexOf(':'));
tProcessedName = tName.Trim();
}
if (tAllParams.Contains(tParamName))
{
logger.LogMessage(ServerLogger.msgType.error,"Construct",800,
"Watershed SOE warning: duplicate parameter name found for layer "+tName +
"(parameter "+tParamName+" is set on another map layer). Layer will not be available"+
" for extraction.");
continue;
}
else{
tAllParams.Add(tParamName);
}
string tDescription = "";
if (layerInfo.Description.Length > 0)
{
if (layerInfo.Description.IndexOf(':') == -1)
{
tDescription = layerInfo.Description.Trim();
}
else if (layerInfo.Description.IndexOf(':') < 6)
{
tDescription = layerInfo.Description.Substring(layerInfo.Description.IndexOf(':') + 1).Trim();
}
else
{
tDescription = layerInfo.Description.Trim();
}
}
ExtractionTypes tExtractionType = ExtractionTypes.Ignore;
if (layerInfo.Type == "Raster Layer")
{
// determine whether we will summarise the raster layer "categorically"
// i.e. a count of each value, or "continuously" i.e. min/max/avg statistics
// based on how the raster is symbolised in the map and whether or not
// it is of integer type
// TODO : Also store the labels for classes in categorical rasters
// so that these can be returned by the SOE to the client
// Cast the renderer to ILegendInfo, get ILegendGroup from it and each
// ILegendClass from that to get the string Label
// Get renderer
// THIS ONLY WORKS WITH MXD SERVICES: WE CANNOT DO THIS ON AN MSD BASED SERVICE
IMapServerObjects3 tMapServerObjects = mapServer as IMapServerObjects3;
ILayer tLayer = tMapServerObjects.get_Layer(mapName, i);
IRasterLayer tRasterLayer = (IRasterLayer)tLayer;
IRasterRenderer tRasterRenderer = tRasterLayer.Renderer;
// Get raster data
IRaster tRaster = dataAccess.GetDataSource(mapName, i) as IRaster;
IRasterProps tRasterProps = tRaster as IRasterProps;
IGeoDataset tRasterGDS = tRaster as IGeoDataset;
bool tTreatAsCategorical = false;
if (tRasterRenderer is RasterUniqueValueRenderer)
{
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 800,
"Raster layer " + tName +
"is symbolised by unique values - treating layer as categorical");
tTreatAsCategorical = tRasterProps.IsInteger;
}
else if (tRasterRenderer is RasterDiscreteColorRenderer)
{
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 800,
"Raster layer " + tName +
"is symbolised by discrete colours - treating layer as categorical");
tTreatAsCategorical = tRasterProps.IsInteger;
}
else if (tRasterRenderer is RasterClassifyColorRampRenderer)
{
// TODO - treat a classified colour ramp as categorical but categories
// determined by classes rather than unique values... needs the summary
// method to have access to the class breaks
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 800,
"Raster layer " + tName +
"is symbolised by classified groups - treating layer as continuous");
}
else if (tRasterRenderer is RasterStretchColorRampRenderer)
{
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 800,
"Raster layer " + tName +
"is symbolised by colour stretch - treating layer as continuous");
}
else
{
logger.LogMessage(ServerLogger.msgType.debug, "Construct", 800,
"Raster layer " + tName +
"is symbolised with unsupported renderer - treating as continuous");
}
tExtractionType = tTreatAsCategorical?
ExtractionTypes.CategoricalRaster:
ExtractionTypes.ContinuousRaster;
ExtractionLayerConfig tLayerInfo = new ExtractionLayerConfig
(i, tProcessedName,tDescription,tExtractionType, tParamName, -1, -1, -1,tRasterGDS);
m_ExtractableParams.Add(tLayerInfo);
}
else
{
// Feature class layer
// TODO - Get the category / values from the symbology (renderer) as for rasters
IFeatureClass tFC = dataAccess.GetDataSource(mapName, i) as IFeatureClass;
IGeoDataset tFeatureGDS = tFC as IGeoDataset;
esriGeometryType tFCType = tFC.ShapeType;
if (tFCType == esriGeometryType.esriGeometryPoint || tFCType == esriGeometryType.esriGeometryMultipoint)
{
tExtractionType = ExtractionTypes.PointFeatures;
}
else if (tFCType == esriGeometryType.esriGeometryPolyline || tFCType == esriGeometryType.esriGeometryLine)
{
tExtractionType = ExtractionTypes.LineFeatures;
}
else if (tFCType == esriGeometryType.esriGeometryPolygon)
{
tExtractionType = ExtractionTypes.PolygonFeatures;
}
int tCategoryField = layerInfo.Fields.FindFieldByAliasName("CATEGORY");
int tValueField = layerInfo.Fields.FindFieldByAliasName("VALUE");
int tMeasureField = layerInfo.Fields.FindFieldByAliasName("MEASURE");
ExtractionLayerConfig tLayerInfo = new ExtractionLayerConfig
(i,tProcessedName,tDescription, tExtractionType, tParamName, tCategoryField, tValueField, tMeasureField,tFeatureGDS);
m_ExtractableParams.Add(tLayerInfo);
// layers with any other geometry type will be ignored
}
}
}
else
{
logger.LogMessage(ServerLogger.msgType.infoStandard, "Construct", 8000,
"WSH: Code to build layer params from properties is not implemented. No extractable"+
"params will be available.");
}
}
IRaster tFDR = dataAccess.GetDataSource(mapName,dir_layerIndex) as IRaster;
m_FlowDirDataset = tFDR as IGeoDataset;
IRaster tFAR = dataAccess.GetDataSource(mapName,acc_layerIndex) as IRaster;
m_FlowAccDataset = tFAR as IGeoDataset;
if(m_FlowDirDataset == null || m_FlowAccDataset == null)
{
logger.LogMessage(ServerLogger.msgType.error,"Construct", 8000,"Watershed SOE Error: layer not found");
m_CanDoWatershed = false;
// return;
}
else
{
m_CanDoWatershed = true;
}
if (ext_layerIndex != 0)
{
m_ExtentFeatureDataset = dataAccess.GetDataSource(mapName, ext_layerIndex) as IGeoDataset;
}
}
catch (Exception e)
{
logger.LogMessage(ServerLogger.msgType.error,"Construct",8000,"Watershed SOE error: could not get the datasets associated with configured map layers."+
"Exception: "+e.Message+e.Source+e.StackTrace+e.TargetSite);
}
try
{
reqHandler = new SoeRestImpl(soe_name, CreateRestSchema()) as IRESTRequestHandler;
}
catch (Exception e)
{
logger.LogMessage(ServerLogger.msgType.error, "Construct", 8000, "WSH: could not create REST schema. Exception: "+e.Message+ " "+e.Source+" "+e.StackTrace+" "+e.TargetSite);
}
}
//IFeatureClass pInputFeatures,int pCategoryFieldNum, int pValueFieldNum, int pMeasureFieldNum)
/// <summary>
/// Summarise the features of an input feature class that fall within an input polygon.
/// Input features can be points, lines, or polygons. A value field and a category field can be provided.
/// If a category field is provided then this will be used like a GROUP BY clause in SQL and return will be broken down by
/// category, in addition to the overall totals.
/// If a value field is provided then it will be totalled (by category if provided), e.g. population in a polygon.
/// But as some line / polygon features may be only partially contained we need to decide how to handle the values on those.
/// Currently we just scale based on the proportion of the original feature that is included but there would be
/// alternatives: count all or nothing based on inclusion of majority of feature, or centre of feature. Not yet implemented.
/// </summary>
/// <param name="pInputPolygon">
/// The IPolygon which will be used to clip and summarise the features from the second parameter
/// </param>
/// <param name="pInputFeatures">
/// The features which will be clipped and summarised. IFeatureClass that must be of ShapeType
/// esriGeometryPoint, esriGeometryPolyline or esriGeometryPolygon
/// </param>
/// <param name="pCategoryFieldNum">
/// ID (integer) of a field in the feature class containing values by which the results should be grouped. Can be
/// any field type but integer, string, etc are recommended. Value of -1 means no summation by category will occur.
/// Set to -1 to not do this summary
/// </param>
/// <param name="pValueFieldNum">
/// ID (integer of a field in the feature class containing values by which the results should be totalled. For example
/// population of counties, value of land parcels. Done in addition to totalling area / length / count.
/// Set to -1 to not do this summary
/// </param>
/// <param name="pMeasureFieldNum">
/// ID (integer) of a field in the feature class containing pre-calculated values for area (polygons) or length (lines).
/// Can be used to speed calculation of these properties. They will be calculated manually for features partially
/// within the input polygon.
/// </param>
/// <returns>
/// FeatureExtractionResult object containing:
/// total feature count,
/// total feature length / area (for lines / polygons),
/// total feature value (from value field if provided),
/// plus each of the above broken down by category if a category field is provided
/// category results are each a dictionary of key=category value (as string), value=int or double
/// </returns>
internal static FeatureExtractionResult SummariseFeatures(IPolygon pInputPolygon,
ExtractionLayerConfig pExtractionLayerConfig)
{
// use cast rather than as to make sure it blows up if the geodataset isn't
// a feature class
IFeatureClass pInputFeatures = (IFeatureClass)pExtractionLayerConfig.LayerDataset;
esriGeometryType tFCType = pInputFeatures.ShapeType;
// set up variables to build results
Dictionary<string, int> tCategoryCounts = new Dictionary<string, int>();
Dictionary<string, double> tCategoryTotals = new Dictionary<string, double>(),
tCategoryMeasures = new Dictionary<string, double>();
double tTotalMeasure = 0, tTotalValue = 0;
int tTotalCount = 0;
// variables to control search
bool hasCategories = pExtractionLayerConfig.HasCategories;
bool hasMeasures = pExtractionLayerConfig.HasMeasures;
bool hasPreCalcMeasures = hasMeasures && (pExtractionLayerConfig.MeasureField != -1);
bool hasValues = false;
if (pExtractionLayerConfig.HasValues && pExtractionLayerConfig.ValueField != -1)
{
// only numeric fields will be totalled
//esriFieldType tValueFieldType = pInputFeatures.Fields.get_Field(pValueFieldNum).Type;
esriFieldType tValueFieldType = pInputFeatures.Fields.get_Field(pExtractionLayerConfig.ValueField)
.Type;
if (tValueFieldType == esriFieldType.esriFieldTypeDouble ||
tValueFieldType == esriFieldType.esriFieldTypeInteger ||
tValueFieldType == esriFieldType.esriFieldTypeSingle ||
tValueFieldType == esriFieldType.esriFieldTypeSmallInteger)
{
hasValues = true;
}
}
// use a spatial filter to do the geographic selection
ISpatialFilter tSpatialFilter = new SpatialFilterClass();
tSpatialFilter.Geometry = pInputPolygon as IGeometry;
// first we will select all features wholly within the polygon. We don't need to do anything special with these
// just use them as is. This applies for points, lines and polys. It is the only thing required for points.
tSpatialFilter.SpatialRel = esriSpatialRelEnum.esriSpatialRelContains;
tSpatialFilter.GeometryField = "SHAPE";
// safe to use a recycling cursor: we are not maintaining a reference to features across multiple calls to NextFeature
IFeatureCursor tFeatureCursor = pInputFeatures.Search(tSpatialFilter, true);
IFeature tThisFeature = tFeatureCursor.NextFeature();
try
{
while (tThisFeature != null)
{
tTotalCount += 1;
double tMeasure = 0;
if (hasPreCalcMeasures)
{
try
{
//tMeasure = (double)tThisFeature.get_Value(pMeasureFieldNum);
tMeasure = (double)tThisFeature.get_Value(pExtractionLayerConfig.MeasureField);
}
catch
{
hasPreCalcMeasures = false;
if (tFCType == esriGeometryType.esriGeometryPolyline)
{
IPolyline tFeatureAsLine = tThisFeature.Shape as IPolyline;
tMeasure = tFeatureAsLine.Length;
}
else if (tFCType == esriGeometryType.esriGeometryPolygon)
{
IArea tFeatureAsArea = tThisFeature.Shape as IArea;
tMeasure = tFeatureAsArea.Area;
}
}
}
else
{
if (tFCType == esriGeometryType.esriGeometryPolyline)
{
IPolyline tFeatureAsLine = tThisFeature.Shape as IPolyline;
tMeasure = tFeatureAsLine.Length;
}
else if (tFCType == esriGeometryType.esriGeometryPolygon)
{
IArea tFeatureAsArea = tThisFeature.Shape as IArea;
tMeasure = tFeatureAsArea.Area;
}
}
tTotalMeasure += tMeasure;
if (hasCategories)
{
// get the category / class of this featue
string tCategory = tThisFeature.get_Value(pExtractionLayerConfig.CategoryField).ToString();
// placeholders for the dictionary lookups (out variables)
int tCurrentCategoryCount;
double tCurrentCategoryMeasure;
// add 1 to the appropriate category count in the category counts dictionary
if (tCategoryCounts.TryGetValue(tCategory, out tCurrentCategoryCount))
{
tCategoryCounts[tCategory] = tCurrentCategoryCount + 1;
}
else
{
tCategoryCounts[tCategory] = 1;
}
if (tCategoryMeasures.TryGetValue(tCategory, out tCurrentCategoryMeasure))
{
tCategoryMeasures[tCategory] = tCurrentCategoryMeasure + tMeasure;
}
else
{
tCategoryMeasures[tCategory] = tMeasure;
}
if (hasValues)
{
// i.e. look up the value from another field, other than just the feature's length/area and count
double tCurrentCategoryTotal;
//double tCurrentArcValue = (double)tThisFeature.get_Value(pValueFieldNum);
double tCurrentArcValue = (double)tThisFeature.get_Value(pExtractionLayerConfig.ValueField);
tTotalValue += tCurrentArcValue;
if (tCategoryTotals.TryGetValue(tCategory, out tCurrentCategoryTotal))
{
tCategoryTotals[tCategory] = tCurrentCategoryTotal + tCurrentArcValue;
}
else
{
tCategoryTotals[tCategory] = tCurrentArcValue;
}
}
}
else if (hasValues)
{
//double tCurrentArcValue = (double)tThisFeature.get_Value(pValueFieldNum);
double tCurrentArcValue = (double)tThisFeature.get_Value(pExtractionLayerConfig.ValueField);
tTotalValue += tCurrentArcValue;
}
tThisFeature = tFeatureCursor.NextFeature();
}
// now for lines and polygons we need to process the features that are partially inside the polygon.
// this process would work on all the features but there is no point doing expensive intersections where we
// don't need to, so we did the wholly-contained features separately
// we need to find the features where there is an intersection between the polygon boundary and the feature's
// interior. Could use shape description language but this is covered by available spatialrelenum values
bool doPartialFeatures = ((tFCType == esriGeometryType.esriGeometryPolyline ||
tFCType == esriGeometryType.esriGeometryPolygon) ); // a point is either in or out!
// not yet implemented: control how partially-intersecting features are handled
//&& pFeatureIntersectionMode != IntersectingFeatureSelectionMode.SelectNoPartialFeatures);
if (doPartialFeatures){
if (tFCType == esriGeometryType.esriGeometryPolyline)
{
// "A polyline and a polygon cross if they share a polyline or a point (for vertical line) in common on the
// interior of the polygon which is not equivalent to the entire polyline."
tSpatialFilter.SpatialRel = esriSpatialRelEnum.esriSpatialRelCrosses;
}
else if (tFCType == esriGeometryType.esriGeometryPolygon)
{
// "Two geometries overlap if the region of their intersection is of the same dimension as the geometries involved
// and is not equivalent to either of the geometries."
tSpatialFilter.SpatialRel = esriSpatialRelEnum.esriSpatialRelOverlaps;
}
// no longer safe to use recycling cursor as we're going to tinker with the features returned
tFeatureCursor = pInputFeatures.Search(tSpatialFilter, false);
tThisFeature = tFeatureCursor.NextFeature();
ITopologicalOperator tInputAsTopoOp = pInputPolygon as ITopologicalOperator;
int tNumberCrossingBoundary = 0;
while (tThisFeature != null)
{
// return (so track) the number of partially-included features separately from the overall total
tNumberCrossingBoundary += 1;
tTotalCount += 1;
// either the length or area of the intersected feature:
double tMeasure = 0;
// either the length or area of entire original intersected feature
// (to get proportion that's included):
double tOriginalMeasure = 0;
// do the
IGeometry tFeatureGeometry = tThisFeature.ShapeCopy;
if (tFCType == esriGeometryType.esriGeometryPolyline)
{
IPolyline tArcEntire = tFeatureGeometry as IPolyline;
tOriginalMeasure = tArcEntire.Length;
IPolyline tArcInside = tInputAsTopoOp.Intersect(tFeatureGeometry, esriGeometryDimension.esriGeometry1Dimension) as IPolyline;
tMeasure = tArcInside.Length;
}
else
{
IArea tAreaEntire = tFeatureGeometry as IArea;
tOriginalMeasure = tAreaEntire.Area;
IArea tAreaInside = tInputAsTopoOp.Intersect(tFeatureGeometry, esriGeometryDimension.esriGeometry2Dimension) as IArea;
tMeasure = tAreaInside.Area;
}
tTotalMeasure += tMeasure;
if (hasCategories)
{
//string tCategory = tThisFeature.get_Value(pCategoryFieldNum).ToString();
string tCategory = tThisFeature.get_Value(pExtractionLayerConfig.CategoryField).ToString();
int tCurrentCategoryCount;
double tCurrentCategoryMeasure;
if (tCategoryCounts.TryGetValue(tCategory, out tCurrentCategoryCount))
{
tCategoryCounts[tCategory] = tCurrentCategoryCount + 1;
}
else
{
tCategoryCounts[tCategory] = 1;
}
if (tCategoryMeasures.TryGetValue(tCategory, out tCurrentCategoryMeasure))
{
tCategoryMeasures[tCategory] = tCurrentCategoryMeasure + tMeasure;
}
else
{
tCategoryMeasures[tCategory] = tMeasure;
}
if (hasValues)
{
// how should we handle a value field in an intersected feature? we can't, for certain,
// as we don't know what they mean. We'll just assume that it scales proportionally with the
// proportion of the original feature's length / area that is included.
// The raster equivalent is to count all or none based on cell centre, so maybe we should count
// all or none based on centroid??
double tCurrentCategoryTotal;
//double tCurrentFeatureValue = (double)tThisFeature.get_Value(pValueFieldNum);
double tCurrentFeatureValue = (double)tThisFeature.get_Value(
pExtractionLayerConfig.ValueField);
double tScaledFeatureValue = (tMeasure / tOriginalMeasure) * tCurrentFeatureValue;
tTotalValue += tScaledFeatureValue;
if (tCategoryTotals.TryGetValue(tCategory,out tCurrentCategoryTotal))
{
tCategoryTotals[tCategory] = tCurrentCategoryTotal + tScaledFeatureValue;
}
else
{
tCategoryTotals[tCategory] = tScaledFeatureValue;
}
}
}
else if (hasValues)
{
//double tCurrentFeatureValue = (double)tThisFeature.get_Value(pValueFieldNum);
double tCurrentFeatureValue = (double)tThisFeature.get_Value(pExtractionLayerConfig.ValueField);
double tScaledFeatureValue = (tMeasure / tOriginalMeasure)*tCurrentFeatureValue;
tTotalValue += tScaledFeatureValue;
}
tThisFeature = tFeatureCursor.NextFeature();
}
}
double? outMeasure;
double? outValue;
if (hasMeasures) { outMeasure = tTotalMeasure; }
else { outMeasure = null; }
if (hasValues) { outValue = tTotalValue; }
else { outValue = null; }
FeatureExtractionResult tResult = new FeatureExtractionResult(
pExtractionLayerConfig.ParamName,
tTotalCount,
outMeasure,
outValue,
tCategoryCounts,
tCategoryMeasures,
tCategoryTotals,
pInputFeatures.ShapeType
);
return tResult;
}
catch (Exception ex)
{
logger.LogMessage(ServerLogger.msgType.debug, "process features", 99, "error summarising features in " +
pInputFeatures.AliasName+" Detail: " + ex.StackTrace + " " + ex.Message);
return new FeatureExtractionResult("An error occurred with extraction from "+pInputFeatures.AliasName,pExtractionLayerConfig.ParamName);
}
}
