public static Opcode_ByteData compile_line(string userline, int bpointer)
{
userline.Replace("/r/n", "");
bool found_opcode = false;
int num = getopcode(userline);
Opcode_ByteData byte_data = new Opcode_ByteData();
IEnumerable <Opcode> thislist = doublecheckopcode(userline, num);
if (thislist.Count() > 0)
{
found_opcode = true;
}
if (found_opcode == true)
{
Opcode_Data userdata = opcode_matchtest(thislist, userline);
string opstring = make_opcode_string(userdata.byte_index);
if (userdata.success)
{
byte_data = get_bytes(userdata, bpointer);
byte_data.param1 = userdata.param1;
byte_data.param2 = userdata.param2;
//Next
//For now just print out the byte data, later this will turn into streaming the data to a file
int length = byte_data.total_instr_length;
string opcode_string = "Opcode Instruction was " + byte_data.memnonic + ": Opcode #" + byte_data.bytes[0] + " ";
for (int t = 1; t < length + 1; t++)
{
opcode_string = opcode_string + "|" + byte_data.bytes[t];
if (t == length)
{
opcode_string = opcode_string + "|";
}
}
Console.WriteLine(opcode_string);
}
}
return(byte_data);
}
public static Opcode_ByteData get_bytes(Opcode_Data data)
{
int[] bytes = new int[30]; //We'll use extra just to be safe
int firstbyte = data.byte_index;
int currentbyte = 1;
bytes[0] = firstbyte;
int param1length = data.param1.Length;
int param2length = data.param2.Length;
int param1bytelength = 1;
int param2bytelength = 1;
//This takes care of only two special cases where the value may not be 4 bytes long
if (data.memnonic == "ST8")
{
param1bytelength = 1;
}
if (data.memnonic == "ST16")
{
param1bytelength = 2;
}
if (data.paramtype1 == Opcode.paramtype.REGISTER || data.paramtype1 == Opcode.paramtype.REGISTERADDRESS)
{
//If the first parameter is a register then the first byte is just the register's value
bytes[currentbyte] = data.reg1value;
currentbyte = currentbyte + 1;
}
if (data.paramtype1 == Opcode.paramtype.VALUE || data.paramtype1 == Opcode.paramtype.ADDRESS)
{
bool writtenvalue = false;
int value = System.Convert.ToInt32(Right(data.param1, param1length - 1));
//Console.WriteLine("The value was " + secondbyte);
byte[] results = INT2LE(value);
//Console.WriteLine("Bytes are " + results[0] + "," + results[1] + "," + results[2] + "," + results[3]);
int[] r = new int[10];
get(value, 8, 0, r);
//Console.WriteLine(" for comparison other bytes are " + r[0] + "," + r[1] + "," + r[2] + "," +r[3]);
//Pad the value bytes to two
if (param1bytelength == 2 && data.memnonic == "ST16")
{
value = value & 65535;
int highbyte = value & 255; // high byte (0x12)
int lowbyte = value >> 8; // low byte (0x34)
bytes[currentbyte] = lowbyte;
bytes[currentbyte + 1] = highbyte;
currentbyte = currentbyte + 1;
currentbyte = currentbyte + 1;
writtenvalue = true;
//Console.WriteLine("highbyte was " + highbyte + " and lowbyte was " + lowbyte);
}
//Pad the value bytes to 1
if (param1bytelength == 1 && data.memnonic == "ST8")
{
value = value & 255;
bytes[currentbyte] = value;
currentbyte = currentbyte + 1;
writtenvalue = true;
}
if (writtenvalue == false)
{
if (data.memnonic != "ST16" && data.memnonic != "ST8")
{
{
results = INT2LE(value);
bytes[currentbyte] = results[0];
currentbyte++;
bytes[currentbyte] = results[1];
currentbyte++;
bytes[currentbyte] = results[2];
currentbyte++;
bytes[currentbyte] = results[3];
currentbyte++;
}
}
}
}
if (data.paramtype2 == Opcode.paramtype.REGISTER || data.paramtype2 == Opcode.paramtype.REGISTERADDRESS)
{
int value = data.reg2value;
//Write the current value
bytes[currentbyte] = value;
}
if (data.paramtype2 == Opcode.paramtype.VALUE || data.paramtype2 == Opcode.paramtype.ADDRESS)
{
int value = System.Convert.ToInt32(Right(data.param2, param2length - 1));
byte[] results = INT2LE(value);
// Console.WriteLine("Bytes are " + results[0] + "," + results[1] + "," + results[2] + "," + results[3]);
int[] r = new int[10];
get(value, 8, 0, r);
//Console.WriteLine(" for comparison other bytes are " + r[0] + "," + r[1] + "," + r[2] + "," + r[3]);
//put the bytes into the opcode array stream
bytes[currentbyte] = results[0];
currentbyte++;
bytes[currentbyte] = results[1];
currentbyte++;
bytes[currentbyte] = results[2];
currentbyte++;
bytes[currentbyte] = results[3];
}
//Console.WriteLine("Just to confirm the bytes written were " + "opcode byte " + bytes[0] + " , " + bytes[1] + "," + bytes[2] + "," + bytes[3] + "," + bytes[4] + "," + bytes[5]+","+bytes[6]);
Opcode_ByteData opcode_bytes = new Opcode_ByteData();
opcode_bytes.total_instr_length = currentbyte;
opcode_bytes.bytes = bytes;
opcode_bytes.memnonic = data.memnonic;
return(opcode_bytes);
}
//This returns a structure that contains everything the user entered, and the opcode information
//From the internal opcode table
static Opcode_Data opcode_matchtest(List <Opcode> opcodelist, string inputline)
{
//this should again patch the pesky issue
string userp1 = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
Opcode_Data outdata = new Opcode_Data();
Opcode.paramtype userparam1;
Opcode.paramtype userparam2;
userparam1 = Opcode.paramtype.DEFAULT;
userparam2 = Opcode.paramtype.DEFAULT;
string[] userline = toarray(inputline);
if (!inputline.Contains("NOP"))
{
userp1 = userline[1];
}
//This little patch allows the if check later on userp2 as an array even if the userp2 string isn't filled
//by a conversion from userp2 to char array.
string userp2 = "ABCDEFGHIJKLKMNOPQRSTUVWXYZ";
if (userline.Count() > 2 && userline[2].Length > 0)
{
userp2 = userline[2];
}
int param_amount = 0;
bool match = false;
int matched_index = 0;
Opcode oc = new Opcode();
//check param1 and 2 if registers
for (int t = 0; t < 12 + 1; t++)
{
if (userp1 == validparams.RegisterParams[t])
{
userparam1 = Opcode.paramtype.REGISTER;
outdata.reg1value = t;
}
if (userp1 == validparams.RegisterAddressParams[t])
{
userparam1 = Opcode.paramtype.REGISTERADDRESS;
outdata.reg1value = t;
}
if (userp2 == validparams.RegisterParams[t])
{
userparam2 = Opcode.paramtype.REGISTER;
outdata.reg2value = t;
}
if (userp2 == validparams.RegisterAddressParams[t])
{
userparam2 = Opcode.paramtype.REGISTERADDRESS;
outdata.reg2value = t;
}
}
char[] line1 = userp1.ToCharArray();
char[] line2 = userp2.ToCharArray();
if (line1[0] == 'V')
{
userparam1 = Opcode.paramtype.VALUE;
}
if (line2[0] == 'V')
{
userparam2 = Opcode.paramtype.VALUE;
}
if (line1[0] == '_')
{
userparam1 = Opcode.paramtype.ADDRESS;
}
if (line2[0] == '_')
{
userparam2 = Opcode.paramtype.ADDRESS;
}
if (userp2.Length > 0)
{
param_amount = 2;
}
if (param_amount == 1)
{
foreach (Opcode n in opcodelist)
{
if (userparam1 == n.param1)
{
match = true; matched_index = n.byteindex; oc = n;
break;
}
}
}
if (param_amount == 2)
{
foreach (Opcode n in opcodelist)
{
if (userparam1 == n.param1 && userparam2 == n.param2)
{
match = true; matched_index = n.byteindex; oc = n;
break;
}
}
}
if (match == true)
{
outdata.byte_index = oc.byteindex;
outdata.param1 = userp1;
outdata.param2 = userp2;
outdata.param_amount = param_amount;
outdata.success = true;
outdata.paramtype1 = oc.param1;
outdata.paramtype2 = oc.param2;
outdata.memnonic = oc.memnonic;
}
if (match == false)
{
outdata.success = false;
}
return(outdata);
}
public static Opcode_ByteData get_bytes(Opcode_Data data, int bpointer)
{
int[] bytes = new int[30]; //We'll use extra just to be safe
int firstbyte = data.byte_index;
//handle replace goto with JMP because it's basically the same thing but with label
if (firstbyte == 42)
{
firstbyte = 33;
}
int currentbyte = 1;
bytes[0] = firstbyte;
int param1length = data.param1.Length;
int param2length = data.param2.Length;
int param1bytelength = 1;
int param2bytelength = 1;
int value = 0;
//This takes care of only two special cases where the value may not be 4 bytes long
if (data.memnonic == "ST8")
{
param1bytelength = 1;
}
if (data.memnonic == "ST16")
{
param1bytelength = 2;
}
if (data.paramtype1 == Opcode.paramtype.REGISTER || data.paramtype1 == Opcode.paramtype.REGISTERADDRESS)
{
//If the first parameter is a register then the first byte is just the register's value
bytes[currentbyte] = data.reg1value;
currentbyte = currentbyte + 1;
}
if (data.paramtype1 == Opcode.paramtype.VALUE || data.paramtype1 == Opcode.paramtype.ADDRESS)
{
bool writtenvalue = false;
value = System.Convert.ToInt32(Right(data.param1, param1length - 1));
//Console.WriteLine("The value was " + secondbyte);
byte[] results = INT2LE(value);
//Console.WriteLine("Bytes are " + results[0] + "," + results[1] + "," + results[2] + "," + results[3]);
int[] r = new int[10];
get(value, 8, 0, r);
//Console.WriteLine(" for comparison other bytes are " + r[0] + "," + r[1] + "," + r[2] + "," +r[3]);
//Pad the value bytes to two
if (param1bytelength == 2 && data.memnonic == "ST16")
{
value = value & 65535;
int highbyte = value & 255; // high byte (0x12)
int lowbyte = value >> 8; // low byte (0x34)
bytes[currentbyte] = lowbyte;
bytes[currentbyte + 1] = highbyte;
currentbyte = currentbyte + 1;
currentbyte = currentbyte + 1;
writtenvalue = true;
//Console.WriteLine("highbyte was " + highbyte + " and lowbyte was " + lowbyte);
}
//Pad the value bytes to 1
if (param1bytelength == 1 && data.memnonic == "ST8")
{
value = value & 255;
bytes[currentbyte] = value;
currentbyte = currentbyte + 1;
writtenvalue = true;
}
if (writtenvalue == false)
{
if (data.memnonic != "ST16" && data.memnonic != "ST8")
{
{
results = INT2LE(value);
bytes[currentbyte] = results[0];
currentbyte++;
bytes[currentbyte] = results[1];
currentbyte++;
bytes[currentbyte] = results[2];
currentbyte++;
bytes[currentbyte] = results[3];
currentbyte++;
}
}
}
}
if (data.paramtype2 == Opcode.paramtype.REGISTER || data.paramtype2 == Opcode.paramtype.REGISTERADDRESS)
{
value = data.reg2value;
//Write the current value
bytes[currentbyte] = value;
}
if (data.paramtype2 == Opcode.paramtype.STRING)
{
if (data.paramtype1 != Opcode.paramtype.GOTO)
{
value = 0;
//if (data.paramtype2 == Opcode.paramtype.VALUE || data.paramtype2 == Opcode.paramtype.ADDRESS) { value = System.Convert.ToInt32(Right(data.param2, param2length - 1)); }
//patch in checking for byte pointers, only if not label type.
if (firstrun)
{
value = bpointer;
if (data.paramtype1 == Opcode.paramtype.LABEL)
{
labelbytepointers.Add(data.param2, value);
}
}
}
if (data.paramtype1 == Opcode.paramtype.GOTO)
{
value = 0; //we don't know what it could be until recompile :)
{
//A bit redundant since we declare 'value' 0 later for goto but. whatever.
//in theory this should compile ALL the needed bytes and still get the correct pointer
if (!firstrun)
{
if (data.param1 == "goto" && (data.param1 != "label"))
{
value = labelbytepointers[data.param2];
}
Console.WriteLine("Value injection found for goto statement " + data.param2 + " and the injection value was " + value);
}
byte[] results = INT2LE(value);
bytes[currentbyte] = results[0];
currentbyte++;
bytes[currentbyte] = results[1];
currentbyte++;
bytes[currentbyte] = results[2];
currentbyte++;
bytes[currentbyte] = results[3];
currentbyte++;
}
}
}
//Console.WriteLine("Just to confirm the bytes written were " + "opcode byte " + bytes[0] + " , " + bytes[1] + "," + bytes[2] + "," + bytes[3] + "," + bytes[4] + "," + bytes[5]+","+bytes[6]);
Opcode_ByteData opcode_bytes = new Opcode_ByteData();
opcode_bytes.total_instr_length = currentbyte;
opcode_bytes.bytes = bytes;
opcode_bytes.memnonic = data.memnonic;
return(opcode_bytes);
}