public void Add(AccountingDay day)
{
foreach (Register reg in this.summaryRegister)
{
reg.Amount = reg.Amount + day.SummaryRegister.FirstOrDefault(r => r.TariffId == reg.TariffId && reg.ObisCode.C == r.ObisCode.C).Amount;
}
this.accountingDays.Add(day);
}
/// <summary>
/// Calculates the next valid range for the current day
/// </summary>
/// <param name="reading">The IntervalReading at the end of the new range.</param>
/// <param name="endCurrentReading">The end date of the current range.</param>
/// <param name="startReading">The IntervalReading at the start of the new range.</param>
/// <param name="start">The start date of the current range.</param>
/// <param name="end">The global end date of the current day.</param>
/// <param name="dayTimeProfiles">The dayTimeProfiles for the current day.</param>
/// <param name="meterReading">The meterReading object of the current original value list.</param>
/// <param name="profile">The current SpecialDayProfile.</param>
/// <param name="currentDay">The current AccountingDay object.</param>
/// <param name="i">The current index value of the parent loop.</param>
/// <param name="latestReading">The current meterReading value.</param>
/// <param name="latestTariffId">The last valid tariff id.</param>
/// <returns>The rangeData of the found range</returns>
public (IntervalReading reading, MeasuringRange range, int index, long latestReading) GetNextRange(IntervalReading reading,
DateTime endCurrentReading, IntervalReading startReading, DateTime start, DateTime end, List <DayTimeProfile> dayTimeProfiles,
MeterReading meterReading, SpecialDayProfile profile, AccountingDay currentDay, int i, long latestReading, ushort latestTariffId)
{
var endReading = SetConcreteIntervalReading(reading, endCurrentReading);
var range = new MeasuringRange();
// Normal situation: reading is valid.
if (endReading.reading != null && IsStatusValid(endReading.reading))
{
range = new MeasuringRange(start, endReading.end, (ushort)dayTimeProfiles[i - 1].TariffNumber,
(endReading.reading.Value.Value - startReading.Value.Value));
}
else // A gap was found
{
// Looking for the next valid IntervalReading
var result = FindLastValidTime(start, end, profile, dayTimeProfiles, meterReading, i - 1);
endReading = SetIntervalReading(meterReading, result.end, result.index, dayTimeProfiles.Count);
if (result.end < end && endReading.reading != null) // An IntervalReading was found which is bigger than startReading but smaller than the detected gap.
{
range = new MeasuringRange(start, endReading.end, (ushort)dayTimeProfiles[result.index].TariffNumber,
(endReading.reading.Value.Value - startReading.Value.Value));
}
else
{
// Count in error register
if (endReading.reading != null && IsStatusValid(endReading.reading))
{
range = new MeasuringRange(start, endReading.end, (endReading.reading.Value.Value - startReading.Value.Value));
}
else
{
// No closing valid IntervalReading for the current day was found (There was a gap at the last tariff change)
latestTariffId = 63;
endReading.reading = startReading; // No valid IntervalReading was found. Reset range to mark it as invalid.
}
}
// 1 Measurement period at tariff change is missing
if ((i - 1) == result.index)
{
latestReading = this.GetLatestReading(latestReading, endReading.reading);
latestTariffId = range.TariffId;
currentDay.Add(range, new ObisId(meterReading.ReadingType.ObisCode));
var j = result.index;
var nextDate = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile, dayTimeProfiles[j + 1]);
var nextReading = SetIntervalReading(meterReading, nextDate, j + 1, dayTimeProfiles.Count);
while (nextReading.reading == null || !IsStatusValid(nextReading.reading))
{
j++;
if (j < dayTimeProfiles.Count - 1)
{
nextDate = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile,
dayTimeProfiles[j + 1]);
nextReading = SetIntervalReading(meterReading, nextDate, j + 1, dayTimeProfiles.Count);
}
else
{
nextDate = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile,
dayTimeProfiles[j]);
nextReading = SetIntervalReading(meterReading, nextDate, j, dayTimeProfiles.Count);
if (nextReading.reading == null || !IsStatusValid(endReading.reading))
{
nextReading = endReading;
break;
}
}
}
// Count in error register
range = new MeasuringRange(endReading.end, nextReading.end, (nextReading.reading.Value.Value - endReading.reading.Value.Value));
endReading = nextReading;
result.index = j + 1;
}
// Protect for the special case i == dayTimeProfiles.Count -1 because it could lead to an endless loop.
if (i != dayTimeProfiles.Count - 1)
{
i = result.index;
}
}
// Check if the range object is empty
if (this.IsRangeEmpty(range))
{
range.TariffId = latestTariffId;
}
return(endReading.reading, range, i, latestReading);
}
/// <summary>
/// Searches the next valid startReading (In case the first value or values of the day are gaps)
/// </summary>
/// <param name="start">the current timestamp.</param>
/// <param name="dayTimeProfiles">The dayTimeProfiles for the current day.</param>
/// <param name="profile">The specialDayProfile of the current day.</param>
/// <param name="meterReading">The meterReading object of the current original value list.</param>
/// <param name="currentDay">The current AccountingDay object.</param>
/// <param name="dtpIndex">The current dayTimeProfiles index.</param>
/// <param name="latestReading">The current meterReading value.</param>
/// <param name="lastTariffId">The last valid tariff id.</param>
/// <returns>The next valid start value.</returns>
public (IntervalReading startReading, int index, long latestReading, ushort tariffId) GetStartReading(DateTime start, List <DayTimeProfile> dayTimeProfiles,
SpecialDayProfile profile, MeterReading meterReading, AccountingDay currentDay, int dtpIndex, long latestReading, ushort lastTariffId)
{
var dayStart = start;
var startReading = new IntervalReading();
var index = dtpIndex;
for (int i = 1; i < dayTimeProfiles.Count; i++)
{
start = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile, dayTimeProfiles[i]);
startReading = meterReading.GetIntervalReadingFromDate(start);
// If the gap reaches the next tariff change
if (dayTimeProfiles[i].TariffNumber != lastTariffId && lastTariffId != 63)
{
lastTariffId = 63;
}
// Checks if a startReading is found
if (startReading != null && IsStatusValid(startReading))
{
currentDay.Add(new MeasuringRange()
{
Start = dayStart,
End = start,
Amount = (startReading.Value.Value - latestReading),
TariffId = lastTariffId
}, new ObisId(meterReading.ReadingType.ObisCode));
index = i;
latestReading = GetLatestReading(latestReading, startReading);
lastTariffId = (ushort)dayTimeProfiles[i].TariffNumber;
break;
}
else
{
index = i;
}
}
// if no startReading for the whole day was found, set index to 96
if ((startReading == null || !IsStatusValid(startReading)) && index == dayTimeProfiles.Count - 1)
{
var nextDay0OClock = start.AddSeconds(900);
startReading = meterReading.GetIntervalReadingFromDate(nextDay0OClock);
// Check if a value for the next day at 0:00 o Clock exists
if (startReading != null && IsStatusValid(startReading))
{
currentDay.Add(new MeasuringRange()
{
Start = dayStart,
End = nextDay0OClock,
Amount = startReading.Value.Value - latestReading,
TariffId = lastTariffId
}, new ObisId(meterReading.ReadingType.ObisCode));
}
index = dayTimeProfiles.Count;
}
return(startReading, index, latestReading, lastTariffId);
}
/// <summary>
/// The main calculation method for every day in the billing period.
/// </summary>
/// <param name="profile">The current SpecialDayProfile</param>
/// <param name="dayProfiles">A List of all DayProfiles</param>
/// <param name="meterReading">The MeterReading instance with the raw data.</param>
/// <param name="supplier">Contains the calculation data.</param>
/// <param name="latestReading">The last valid value of an IntervalReading.</param>
/// <param name="latestTariffId">The last vaild tariff.</param>
/// <returns>The calculated AccountingSection</returns>
public (AccountingDay day, long latestReading, ushort tariffId) GetDayData(SpecialDayProfile profile, List <DayProfile> dayProfiles,
MeterReading meterReading, UsagePointLieferant supplier, long latestReading, ushort latestTariffId)
{
var registers = supplier.GetRegister();
this.UpdateReadingTypeFromOriginalValueList(registers);
var currentDay = new AccountingDay(registers);
// Every SpecialDayProfile is linked to a dayProfile which contains dayTimeProfiles.
// This dayTimeProfiles are needed because they contain the tariff change information of the day.
var dayTimeProfiles = GetValidDayTimeProfiles(dayProfiles, profile);
var start = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile, dayTimeProfiles[0]);
var index = 1;
var startReading = meterReading.GetIntervalReadingFromDate(start);
// If the current day has a gap at 00:00
if (startReading == null || !IsStatusValid(startReading))
{
var startData = this.GetStartReading(start, dayTimeProfiles, profile,
meterReading, currentDay, index, latestReading, latestTariffId);
index = startData.index;
startReading = startData.startReading;
start = startData.startReading != null && IsStatusValid(startData.startReading) ? startData.startReading.TargetTime.Value : start;
latestTariffId = startData.tariffId;
latestReading = startData.latestReading;
}
// Check whether dayTimeProfiles is null or empty
this.CheckInitSettings(dayTimeProfiles);
if (startReading != null && IsStatusValid(startReading))
{
currentDay.Reading = new Reading()
{
Amount = startReading.Value, ObisCode = new ObisId(meterReading.ReadingType.ObisCode)
};
currentDay.Start = profile.SpecialDayDate.GetDate();
}
var endReading = SetConcreteIntervalReading(null, DateTime.MinValue);
for (var i = index; i < dayTimeProfiles.Count; i++)
{
DateTime end;
// Check if the tariff number changes
if (dayTimeProfiles[i - 1].TariffNumber != dayTimeProfiles[i].TariffNumber)
{
// Set the end of the current range
end = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile, dayTimeProfiles[i]);
endReading = SetIntervalReading(meterReading, end, i, dayTimeProfiles.Count);
var rangeData = GetNextRange(endReading.reading, endReading.end,
startReading, start, end,
dayTimeProfiles, meterReading, profile, currentDay, i, latestReading, latestTariffId);
latestReading = rangeData.latestReading;
start = rangeData.reading.TargetTime.Value;
startReading = rangeData.reading;
i = rangeData.index;
latestTariffId = rangeData.range.TariffId;
latestReading = this.GetLatestReading(latestReading, rangeData.reading);
if (!this.IsRangeEmpty(rangeData.range))
{
currentDay.Add(rangeData.range, new ObisId(meterReading.ReadingType.ObisCode));
}
}
// If there is no tariff change at the current timestamp
else
{
// Check if it is the last value of the current day
if (i == dayTimeProfiles.Count - 1)
{
end = ModelExtensions.GetDateTimeFromSpecialDayProfile(profile, dayTimeProfiles[i]);
endReading = SetIntervalReading(meterReading, end, i, dayTimeProfiles.Count);
var rangeData = GetNextRange(endReading.reading, endReading.end,
startReading, start, end,
dayTimeProfiles, meterReading, profile, currentDay, i, latestReading, latestTariffId);
latestReading = rangeData.latestReading;
start = end;
startReading = rangeData.reading;
i = rangeData.index;
latestTariffId = rangeData.range.TariffId;
latestReading = this.GetLatestReading(latestReading, rangeData.reading);
if (!this.IsRangeEmpty(rangeData.range))
{
currentDay.Add(rangeData.range, new ObisId(meterReading.ReadingType.ObisCode));
}
}
}
}
return(currentDay, latestReading, latestTariffId);
}
