public void drawPlaceExp(ref string a)
{
int index = 0;
if (points.Count < 2)
{
return;
}
for (int i = 0; i < points[index].Count - 1; i++)
{
a += AutocadExport.drawLine(points[index][i], points[index][i + 1]);
}
if (vinoska != null && vinoska[index] != null)
{
a += AutocadExport.drawLine(vinoska[index].startPoint, vinoska[index].vertex1);
a += AutocadExport.drawLine(vinoska[index].vertex1, vinoska[index].vertex2);
if (vinoska[index].vertex1.X < vinoska[index].vertex2.X)
{
a += AutocadExport.drawText(new RectangleF(vinoska[index].vertex1.X, vinoska[index].vertex1.Y - 30, 100, 30), labels[index]);
}
else
{
a += AutocadExport.drawText(new RectangleF(vinoska[index].vertex2.X, vinoska[index].vertex1.Y - 30, 100, 30), labels[index]);
}
}
}
public void drawStrExp(ref string a)
{
int index = 3;
if (points.Count < 2)
{
return;
}
for (int i = 0; i < points[index].Count - 1; i++)
{
a += AutocadExport.drawLine(new Point(points[index][i].X + offsetConnection * 3, points[index][i].Y), new Point(points[index][i + 1].X + offsetConnection * 3, points[index][i + 1].Y));
}
if (vinoska != null && vinoska[index] != null)
{
a += AutocadExport.drawLine(new Point(vinoska[index].startPoint.X + offsetConnection * 3, vinoska[index].startPoint.Y), new Point(vinoska[index].vertex1.X + offsetConnection * 3, vinoska[index].vertex1.Y));
a += AutocadExport.drawLine(new Point(vinoska[index].vertex1.X + offsetConnection * 3, vinoska[index].vertex1.Y), new Point(vinoska[index].vertex2.X + offsetConnection * 3, vinoska[index].vertex2.Y));
if (vinoska[index].vertex1.X < vinoska[index].vertex2.X)
{
a += AutocadExport.drawText(new RectangleF(vinoska[index].vertex1.X + offsetConnection * 3, vinoska[index].vertex1.Y - 30, 100, 30), labels[index]);
}
else
{
a += AutocadExport.drawText(new RectangleF(vinoska[index].vertex2.X + offsetConnection * 3, vinoska[index].vertex1.Y - 30, 100, 30), labels[index]);
}
}
}
public override void drawConExp(ref string result)
{
int index = 1;
result += AutocadExport.drawrect(new Rectangle(offsetConnection + locations[index].X, locations[index].Y, scales[index].X, scales[index].Y));
result += AutocadExport.drawText(new RectangleF(offsetConnection + locations[index].X, locations[index].Y - 30, scales[index].X, 30), labels[index]);
}
public override void drawStrExp(ref string result)
{
int localSheetIndex = 3;
if (!inbox)
{
return;
}
result += AutocadExport.drawrect(new Rectangle(offsetConnection * 3 + locations[localSheetIndex].X, locations[localSheetIndex].Y, scales[localSheetIndex].X, scales[localSheetIndex].Y));
//g.DrawLines(new Pen(Brushes.Black, 3), new Point[] { locations[localSheetIndex],
// new Point(locations[localSheetIndex].X + scales[localSheetIndex].X, locations[localSheetIndex].Y),
// new Point(locations[localSheetIndex].X + scales[localSheetIndex].X, locations[localSheetIndex].Y + scales[localSheetIndex].Y),
// new Point(locations[localSheetIndex].X, locations[localSheetIndex].Y + scales[localSheetIndex].Y),
// locations[localSheetIndex] });
StringFormat f = new StringFormat();
f.Alignment = StringAlignment.Center;
f.LineAlignment = StringAlignment.Center;
//найти название
if (Schemes_Editor.mainList.Find(x => x.id == globalId) != null)
{
result += AutocadExport.drawText(new RectangleF(offsetConnection * 3 + locations[localSheetIndex].X, locations[localSheetIndex].Y, scales[localSheetIndex].X, scales[localSheetIndex].Y), labels[localSheetIndex]);
// g.DrawString(labels[localSheetIndex], new Font("Arial", 7), Brushes.DarkRed, new RectangleF(locations[localSheetIndex].X, locations[localSheetIndex].Y, scales[localSheetIndex].X, scales[localSheetIndex].Y));
}
//if (vinoska != null)
//{
// g.DrawLines(Pens.Blue, new Point[] { vinoska.startPoint, vinoska.vertex1, vinoska.vertex2 });
// g.DrawString(vinoska.text, new Font("Arial", 14), Brushes.DarkGreen, vinoska.vertex1.X, vinoska.vertex1.Y - 30);
//}
}
public void drawExp(ref string a, int index)
{
if (index == 2)
{
return;
}
a += AutocadExport.drawrect(new Rectangle(locations[index].X + offsetConnection * index, locations[index].Y, locations[index].Width, locations[index].Height));
a += AutocadExport.drawText(new RectangleF(locations[index].X + offsetConnection * index, locations[index].Y - 30, locations[index].Width, 30), labels[index]);
}
public override void drawStrExp(ref string result)
{
int offsetConnection = 3000;
var target = Schemes_Editor.mainList.Find(x => x.id == globalId);
if (units == -1)
{
units = Convert.ToInt32(target.properties["Количество юнитов (шт)"]);
}
int i = 3;
// g.DrawRectangle(Pens.Black, locations[i].X, locations[i].Y, scales[i].X, scales[i].Y);
// g.DrawRectangle(Pens.Black, locations[i].X + 20, locations[i].Y + 30, scales[i].X - 40, scales[i].Y - 60);
// unitSize = (scales[i].Y - 60) / (units * 1.0f);
unitSize = 40;
scales[i] = new Point(scales[i].X, (int)(unitSize * equipInside.Count + 40));
result += AutocadExport.drawrect(new Rectangle(offsetConnection * 3 + locations[i].X, locations[i].Y, scales[i].X, scales[i].Y));
// g.DrawRectangle(Pens.Black, locations[i].X, locations[i].Y, scales[i].X, scales[i].Y);
for (int j = 0; j < equipInside.Count; j++)
{
//equipInside[j].locations[i] = new Point(locations[i].X + 20, (int)(locations[i].Y + 30 + positions[j] * unitSize));
//equipInside[j].scales[i] = new Point(scales[i].X - 40, (int)unitSize-30);////
equipInside[j].locations[i] = new Point(locations[i].X + 20, (int)(locations[i].Y + 20 + j * unitSize));
equipInside[j].scales[i] = new Point(scales[i].X - 40, (int)unitSize - 20);////
}
if (equipInside.Count > 1)
{
for (int j = 1; j < equipInside.Count; j++)
{
result += AutocadExport.drawLine(offsetConnection * 3 + locations[i].X + scales[i].X / 2 - 13, locations[i].Y + 20 + unitSize * j - 18, offsetConnection * 3 + locations[i].X + scales[i].X / 2 + 13, locations[i].Y + 20 + (unitSize * j - 2));
result += AutocadExport.drawLine(offsetConnection * 3 + locations[i].X + scales[i].X / 2 - 13, locations[i].Y + 20 + (unitSize) * j - 2, offsetConnection * 3 + locations[i].X + scales[i].X / 2 + 13, locations[i].Y + 20 + (unitSize * j - 18));
//g.DrawLine(new Pen(Color.Blue, 3), locations[i].X + scales[i].X / 2 - 13, locations[i].Y + 20 + unitSize * j - 18, locations[i].X + scales[i].X / 2 + 13, locations[i].Y + 20 + (unitSize * j - 2));
//g.DrawLine(new Pen(Color.Blue, 3), locations[i].X + scales[i].X / 2 - 13, locations[i].Y + 20 + (unitSize) * j - 2, locations[i].X + scales[i].X / 2 + 13, locations[i].Y + 20 + (unitSize * j - 18));
}
}
//по надписи
StringFormat f = new StringFormat();
f.Alignment = StringAlignment.Center;
//найти название
if (Schemes_Editor.mainList.Find(x => x.id == globalId) != null)
{
// string roomName = Schemes_Editor.mainList.Find(x => x.id == globalId).name;
result += AutocadExport.drawText(new RectangleF(offsetConnection * 3 + locations[i].X, locations[i].Y - 30, scales[i].X, 30), labels[i]);
//g.DrawString(labels[i], new Font("Arial", 10), Brushes.DarkRed, new RectangleF(locations[i].X, locations[i].Y - 30, scales[i].X, 30), f);
}
}
public override void drawStrExp(ref string result)
{
int localSheetIndex = 3;
List <Equipment.VectorPic> list = new List <Equipment.VectorPic>();
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inPlacementScheme != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inPlacementScheme.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inConnectionScheme != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inConnectionScheme.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inBox != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inBox.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inStructural != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inStructural.copy());
}
else
{
list.Add(null);
}
if (list[localSheetIndex] != null)
{
Equipment.Point WidthHeight = list[localSheetIndex].GetProp();
float Xprop = WidthHeight.X / (scales[localSheetIndex].X * 1.0f),
Yprop = WidthHeight.Y / (scales[localSheetIndex].Y * 1.0f);
list[localSheetIndex].divide(Xprop, Yprop);
//foreach (var j in list[localSheetIndex].circles)
// g.DrawEllipse(Pens.Black, locations[localSheetIndex].X + (float)j.center.X - (float)j.radiusX, locations[localSheetIndex].Y + (float)j.center.Y - (float)j.radiusY, (float)j.radiusX * 2, (float)j.radiusY * 2);
foreach (var j in list[localSheetIndex].polyLines)
{
for (int k = 0; k < j.Count - 1; k++)
{
result += AutocadExport.drawLine(offsetConnection * 3 + j[k].X + locations[localSheetIndex].X, j[k].Y + locations[localSheetIndex].Y, offsetConnection * 3 + j[k + 1].X + locations[localSheetIndex].X, j[k + 1].Y + locations[localSheetIndex].Y);
//g.DrawLine(Pens.Black, j[k].X + locations[localSheetIndex].X, j[k].Y + locations[localSheetIndex].Y, j[k + 1].X + locations[localSheetIndex].X, j[k + 1].Y + locations[localSheetIndex].Y);
}
}
}
//по надписи
StringFormat f = new StringFormat();
f.Alignment = StringAlignment.Center;
//найти название
if (Schemes_Editor.mainList.Find(x => x.id == globalId) != null)
{
string roomName = Schemes_Editor.mainList.Find(x => x.id == globalId).name;
result += AutocadExport.drawText(new RectangleF(offsetConnection * 3 + locations[localSheetIndex].X, locations[localSheetIndex].Y - 30, scales[localSheetIndex].X, 30), roomName);
// g.DrawString(roomName, new Font("Arial", 10), Brushes.DarkRed, new RectangleF(locations[localSheetIndex].X, locations[localSheetIndex].Y - 30, scales[localSheetIndex].X, 30), f);
}
}
public override void drawBoxExp(ref string result)
{
var target = Schemes_Editor.mainList.Find(x => x.id == globalId);
if (units == -1)
{
units = Convert.ToInt32(target.properties["Количество юнитов (шт)"]);
}
int scheme = 2;
result += AutocadExport.drawrect(new Rectangle(offsetConnection * 2 + locations[scheme].X, locations[scheme].Y, scales[scheme].X, scales[scheme].Y));
result += AutocadExport.drawrect(new Rectangle(offsetConnection * 2 + locations[scheme].X + 20, locations[scheme].Y + 30, scales[scheme].X - 40, scales[scheme].Y - 60));
unitSize = (scales[scheme].Y - 60) / (units * 1.0f);
//найти название
if (Schemes_Editor.mainList.Find(x => x.id == globalId) != null)
{
string boxName = Schemes_Editor.mainList.Find(x => x.id == globalId).name;
result += AutocadExport.drawText(new Rectangle(offsetConnection * 2 + locations[scheme].X, locations[scheme].Y - 30, scales[scheme].X, 30), boxName);
}
//по таблице
//leftupper point
int one = 30, two = 100, three = 150;
int total = one + two + three;
int heigth = 30;
Point lu = new Point(locations[scheme].X + scales[scheme].X + 30, locations[scheme].Y);
//heaader
result += AutocadExport.drawText(offsetConnection * 2 + lu.X, lu.Y, one, heigth, "Поз");
result += AutocadExport.drawText(offsetConnection * 2 + lu.X + one, lu.Y, two, heigth, "Наименование");
result += AutocadExport.drawText(offsetConnection * 2 + lu.X + one + two, lu.Y, three, heigth, "Описание");
for (int i = 0; i < equipInside.Count + 2; i++)
{
result += AutocadExport.drawLine(offsetConnection * 2 + lu.X, lu.Y + heigth * i, offsetConnection * 2 + lu.X + total, lu.Y + heigth * i);
}
result += AutocadExport.drawLine(offsetConnection * 2 + lu.X, lu.Y, offsetConnection * 2 + lu.X, lu.Y + heigth * (equipInside.Count + 1));
result += AutocadExport.drawLine(offsetConnection * 2 + lu.X + one, lu.Y, offsetConnection * 2 + lu.X + one, lu.Y + heigth * (equipInside.Count + 1));
result += AutocadExport.drawLine(offsetConnection * 2 + lu.X + one + two, lu.Y, offsetConnection * 2 + lu.X + one + two, lu.Y + heigth * (equipInside.Count + 1));
result += AutocadExport.drawLine(offsetConnection * 2 + lu.X + one + two + three, lu.Y, offsetConnection * 2 + lu.X + one + two + three, lu.Y + heigth * (equipInside.Count + 1));
for (int i = 1; i < equipInside.Count + 1; i++)
{
result += AutocadExport.drawText(offsetConnection * 2 + lu.X, lu.Y + i * heigth, one, heigth, i.ToString());
result += AutocadExport.drawText(offsetConnection * 2 + lu.X + one, lu.Y + i * heigth, two, heigth, equipInside[i - 1].labels[scheme]);
result += AutocadExport.drawText(offsetConnection * 2 + lu.X + one + two, lu.Y + i * heigth, three, heigth, Schemes_Editor.mainList.Find(x => x.id == equipInside[i - 1].globalId).description);
}
//мерная палка left doen start point
lu = new Point(locations[scheme].X - 100, (int)(locations[scheme].Y + scales[scheme].Y - 30 - unitSize));
result += AutocadExport.drawLine(offsetConnection * 2 + locations[scheme].X - 100, locations[scheme].Y + scales[scheme].Y - 30, offsetConnection * 2 + locations[scheme].X - 80, locations[scheme].Y + scales[scheme].Y - 30);
// g.DrawLine(Pens.Black, locations[scheme].X - 100, locations[scheme].Y + scales[scheme].Y - 30, locations[scheme].X - 80, locations[scheme].Y + scales[scheme].Y - 30);
for (int i = 0; i < units; i++)
{
result += AutocadExport.drawrect(new Rectangle(offsetConnection * 2 + lu.X, (int)(lu.Y - unitSize * i), 3, (int)unitSize));
// g.DrawRectangle(Pens.Black, lu.X, lu.Y - unitSize * i, 3, unitSize);
if ((i + 1) % 5 == 0)
{
result += AutocadExport.drawText(new RectangleF(offsetConnection * 2 + lu.X + 4, lu.Y - unitSize * i, 30, 20), (i + 1).ToString());
// g.DrawString((i + 1).ToString(), new Font("Arial", 7), Brushes.Black, lu.X + 4, lu.Y - unitSize * i);
}
}
result += AutocadExport.drawLine(offsetConnection * 2 + locations[scheme].X - 100, locations[scheme].Y + scales[scheme].Y - 30 - unitSize * units, offsetConnection * 2 + locations[scheme].X - 80, locations[scheme].Y + scales[scheme].Y - 30 - unitSize * units);
//g.DrawLine(Pens.Black, locations[scheme].X - 100, locations[scheme].Y + scales[scheme].Y - 30 - unitSize * units, locations[scheme].X - 80, locations[scheme].Y + scales[scheme].Y - 30 - unitSize * units);
// g.DrawString(j.ToString(), new Font("Arial", 7), Brushes.Black, new RectangleF(lu.X, lu.Y + 30 * i, one, 30), f);
// g.DrawString(equipInside[j - 1].boxLabel, new Font("Arial", 7), Brushes.Black, new RectangleF(lu.X + one, lu.Y + 30 * i, two, 30), f);
// g.DrawString(Schemes_Editor.mainList.Find(x => x.id == equipInside[j - 1].globalId).description, new Font("Arial", 7), Brushes.Black, new RectangleF(lu.X + one + two, lu.Y + 30 * i, three, 30), f);
//int num = 1;
//foreach (var j in equipInside)
//{
// if (j.vinoska != null)
// {
// result += $"pline {j.vinoska.startPoint.X},{-j.vinoska.startPoint.Y} {j.vinoska.vertex1.X},{-j.vinoska.vertex1.Y} {j.vinoska.vertex2.X},{-j.vinoska.vertex2.Y} \r\n";
// result += $"text {j.vinoska.vertex2.X},{-j.vinoska.vertex2.Y} 0 {num}\r\n";
// }
// num++;
//}
}
public override void drawBoxExp(ref string result)
{
if (labels == null)
{
string name = Schemes_Editor.mainList.Find(x => x.id == globalId).name;
labels = new string[] { name, name, name, name };
}
int localSheetIndex = 2;
List <Equipment.VectorPic> list = new List <Equipment.VectorPic>();
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inPlacementScheme != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inPlacementScheme.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inConnectionScheme != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inConnectionScheme.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inBox != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inBox.copy());
}
else
{
list.Add(null);
}
if (Schemes_Editor.mainList.Find(x => x.id == globalId).inStructural != null)
{
list.Add(Schemes_Editor.mainList.Find(x => x.id == globalId).inStructural.copy());
}
else
{
list.Add(null);
}
if (list[localSheetIndex] != null)
{
Equipment.Point WidthHeight = list[localSheetIndex].GetProp();
float Xprop = WidthHeight.X / (scales[localSheetIndex].X * 1.0f),
Yprop = WidthHeight.Y / (scales[localSheetIndex].Y * 1.0f);
list[localSheetIndex].divide(Xprop, Yprop);
//foreach (var j in list[localSheetIndex].circles)
// g.DrawEllipse(Pens.Black, locations[localSheetIndex].X + (float)j.center.X - (float)j.radiusX, locations[localSheetIndex].Y + (float)j.center.Y - (float)j.radiusY, (float)j.radiusX * 2, (float)j.radiusY * 2);
foreach (var j in list[localSheetIndex].polyLines)
{
for (int k = 0; k < j.Count - 1; k++)
{
result += AutocadExport.drawLine(offsetConnection * 2 + j[k].X + locations[localSheetIndex].X, j[k].Y + locations[localSheetIndex].Y, offsetConnection * 3 + j[k + 1].X + locations[localSheetIndex].X, j[k + 1].Y + locations[localSheetIndex].Y);
//g.DrawLine(Pens.Black, j[k].X + locations[localSheetIndex].X, j[k].Y + locations[localSheetIndex].Y, j[k + 1].X + locations[localSheetIndex].X, j[k + 1].Y + locations[localSheetIndex].Y);
}
}
}
if (vinoska != null && vinoska[localSheetIndex] != null)
{
if (localSheetIndex == 2 && inbox)
{
int index = 0;
//найти коробку в которой он
foreach (boxes i in Schemes_Editor.mainWorkList.Where(x => x is boxes))
{
int founded = i.equipInside.FindIndex(x => x.localID == localID);
if (founded != -1)
{
index = i.positions[founded] + 1;
break;
}
}
result += AutocadExport.drawLine(new Point(offsetConnection * 2 + vinoska[localSheetIndex].startPoint.X, vinoska[localSheetIndex].startPoint.Y), new Point(offsetConnection * 3 + vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y));
// g.DrawLines(Pens.Blue, new Point[] { vinoska[localSheetIndex].startPoint, vinoska[localSheetIndex].vertex1, vinoska[localSheetIndex].vertex2 });
if (vinoska[localSheetIndex].vertex1.X < vinoska[localSheetIndex].vertex2.X)
{
result += AutocadExport.drawText(offsetConnection * 2 + vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y - 30, 50, 30, index.ToString());
}
// g.DrawString(index.ToString(), new Font("Arial", 14), Brushes.DarkGreen, vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y - 30);
else
{
result += AutocadExport.drawText(offsetConnection * 2 + vinoska[localSheetIndex].vertex2.X, vinoska[localSheetIndex].vertex1.Y - 30, 50, 30, index.ToString());
}
// g.DrawString(index.ToString(), new Font("Arial", 14), Brushes.DarkGreen, vinoska[localSheetIndex].vertex2.X, vinoska[localSheetIndex].vertex1.Y - 30);
}
else
{
result += AutocadExport.drawLine(new Point(offsetConnection * 2 + vinoska[localSheetIndex].startPoint.X, vinoska[localSheetIndex].startPoint.Y), new Point(offsetConnection * 3 + vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y));
// g.DrawLines(Pens.Blue, new Point[] { vinoska[localSheetIndex].startPoint, vinoska[localSheetIndex].vertex1, vinoska[localSheetIndex].vertex2 });
if (vinoska[localSheetIndex].vertex1.X < vinoska[localSheetIndex].vertex2.X)
{
result += AutocadExport.drawText(offsetConnection * 2 + vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y - 30, 50, 30, labels[localSheetIndex]);
}
// g.DrawString(labels[localSheetIndex], new Font("Arial", 14), Brushes.DarkGreen, vinoska[localSheetIndex].vertex1.X, vinoska[localSheetIndex].vertex1.Y - 30);
else
{
result += AutocadExport.drawText(offsetConnection * 2 + vinoska[localSheetIndex].vertex2.X, vinoska[localSheetIndex].vertex1.Y - 30, 50, 30, labels[localSheetIndex]);
}
// g.DrawString(labels[localSheetIndex], new Font("Arial", 14), Brushes.DarkGreen, vinoska[localSheetIndex].vertex2.X, vinoska[localSheetIndex].vertex1.Y - 30);
}
}
}
