コード例 #1
0
ファイル: RhinoPipeConverter.cs プロジェクト: yasenRK/ThePipe
        public GeometryConverter()
        {
            var ptConv    = AddConverter(new PointConverter(_pt3dConv));
            var curveConv = new CurveConverter(_pt3dConv, _arcConv, _lineConv);

            AddConverter(curveConv);
            var meshConv = AddConverter(new MeshConverter(_pt3fConv));

            var surfaceConverter = new SurfaceConverter(curveConv, _vec3DConv, _pt3dConv);

            AddConverter(surfaceConverter);

            var brepConv = new BrepConverter(surfaceConverter, curveConv, _pt3dConv);

            AddConverter(brepConv);
        }
コード例 #2
0
ファイル: SurfaceConverter.cs プロジェクト: yasenRK/ThePipe
        public SurfaceConverter(CurveConverter curveConv, Vector3DConverter vecConv, Point3dConverter ptConv)
        {
            //extrusion surfaces
            AddConverter(new PipeConverter <rh.Extrusion, pps.Extrusion>(
                             (rhE) => {
                ppc.Line path = (ppc.Line)curveConv.ConvertToPipe <rh.Curve, ppc.Curve>(rhE.PathLineCurve());

                pps.Extrusion extr = new pps.Extrusion(curveConv.ConvertToPipe <rh.Curve, ppc.Curve>(rhE.Profile3d(0, 0)),
                                                       vecConv.ConvertToPipe <rh.Vector3d, pp.Vec>(rhE.PathTangent), path.Length);

                for (int i = 1; i < rhE.ProfileCount; i++)
                {
                    extr.Holes.Add(curveConv.ConvertToPipe <rh.Curve, ppc.Curve>(rhE.Profile3d(i, 0)));
                }

                extr.CappedAtStart = rhE.IsCappedAtBottom;
                extr.CappedAtEnd   = rhE.IsCappedAtTop;
                extr.SurfaceNormal = vecConv.ToPipe <rh.Vector3d, pp.Vec>(rhE.NormalAt(rhE.Domain(0).Mid, rhE.Domain(1).Mid));

                return(extr);
            },
                             (ppE) => {
                if (1 - ppE.Direction.Dot(new pp.Vec(0, 0, 1)) > 1e-3)
                {
                    //the extrusion is not vertical
                    throw new InvalidOperationException("Cannot create this extrusion. " +
                                                        "Try converting it into a polysurface and pushing it again");
                }
                var profile       = curveConv.FromPipe <rh.Curve, ppc.Curve>(ppE.ProfileCurve);
                rh.Extrusion extr = rh.Extrusion.Create(profile, ppE.Height, ppE.CappedAtEnd || ppE.CappedAtStart);
                ppE.Holes.ForEach((h) => extr.AddInnerProfile(curveConv.FromPipe <rh.Curve, ppc.Curve>(h)));
                //extr.SetOuterProfile(profile, false);
                //extr.SetPathAndUp(profile.PointAtStart, profile.PointAtStart + pathVec, pathVec);

                string msg;
                if (!extr.IsValidWithLog(out msg))
                {
                    System.Diagnostics.Debug.WriteLine(msg);
                    throw new InvalidOperationException("Cannot create a valid extrusion from the received data: \n" + msg);
                }

                var rhNorm = extr.NormalAt(extr.Domain(0).Mid, extr.Domain(1).Mid);
                if (rh.Vector3d.Multiply(rhNorm, vecConv.FromPipe <rh.Vector3d, pp.Vec>(ppE.SurfaceNormal)) < 0)
                {
                    //extrusions don't need to be flipped;
                }

                return(extr);
            }
                             ));

            //NurbsSurfaces
            AddConverter(new PipeConverter <rh.NurbsSurface, pps.NurbsSurface>(
                             (rns) =>
            {
                pps.NurbsSurface nurbs = new pps.NurbsSurface(rns.Points.CountU, rns.Points.CountV, rns.Degree(0), rns.Degree(1));

                for (int u = 0; u < rns.Points.CountU; u++)
                {
                    for (int v = 0; v < rns.Points.CountV; v++)
                    {
                        nurbs.SetControlPoint(ptConv.ToPipe <rh.Point3d, pp.Vec>(rns.Points.GetControlPoint(u, v).Location), u, v);
                        nurbs.SetWeight(rns.Points.GetControlPoint(u, v).Weight, u, v);
                    }
                }
                rh.Interval uDomain = rns.Domain(0);
                rh.Interval vDomain = rns.Domain(1);
                Func <double, rh.Interval, double> scaleKnot = (k, domain) => (k - domain.Min) / (domain.Length);
                nurbs.UKnots = rns.KnotsU.Select((k) => scaleKnot.Invoke(k, uDomain)).ToList();
                nurbs.VKnots = rns.KnotsV.Select((k) => scaleKnot.Invoke(k, vDomain)).ToList();

                nurbs.IsClosedInU = rns.IsClosed(0);
                nurbs.IsClosedInV = rns.IsClosed(1);

                nurbs.SurfaceNormal = vecConv.ToPipe <rh.Vector3d, pp.Vec>(rns.NormalAt(rns.Domain(0).Mid, rns.Domain(1).Mid));

                return(nurbs);
            },
                             (pns) => {
                if (pns.IsClosedInU)
                {
                    pns.WrapPointsToCloseSurface(0);
                }
                if (pns.IsClosedInV)
                {
                    pns.WrapPointsToCloseSurface(1);
                }

                var nurbs = rh.NurbsSurface.Create(3, true, pns.UDegree + 1, pns.VDegree + 1, pns.UCount, pns.VCount);

                for (int u = 0; u < pns.UCount; u++)
                {
                    for (int v = 0; v < pns.VCount; v++)
                    {
                        var cp = new rh.ControlPoint(ptConv.FromPipe <rh.Point3d, pp.Vec>(pns.GetControlPointAt(u, v)),
                                                     pns.GetWeightAt(u, v));
                        nurbs.Points.SetControlPoint(u, v, cp);
                    }
                }

                rh.Interval uDomain = nurbs.Domain(0);
                rh.Interval vDomain = nurbs.Domain(1);
                Func <double, rh.Interval, double> scaleKnot = (k, domain) => k * (domain.Length) + domain.Min;
                if (nurbs.KnotsU.Count == pns.UKnots.Count)
                {
                    for (int i = 0; i < nurbs.KnotsU.Count; i++)
                    {
                        nurbs.KnotsU[i] = scaleKnot.Invoke(pns.UKnots[i], uDomain);
                    }
                }
                if (nurbs.KnotsV.Count == pns.VKnots.Count)
                {
                    for (int i = 0; i < nurbs.KnotsV.Count; i++)
                    {
                        nurbs.KnotsV[i] = scaleKnot.Invoke(pns.VKnots[i], vDomain);
                    }
                }

                string msg;
                if (!nurbs.IsValidWithLog(out msg))
                {
                    System.Diagnostics.Debug.WriteLine(msg);
                    if (!nurbs.IsPeriodic(0))
                    {
                        nurbs.KnotsU.CreateUniformKnots(1.0 / (nurbs.Points.CountU));
                    }
                    else
                    {
                        nurbs.KnotsU.CreatePeriodicKnots(1.0 / (nurbs.Points.CountU));
                    }
                    if (!nurbs.IsPeriodic(1))
                    {
                        nurbs.KnotsV.CreateUniformKnots(1.0 / (nurbs.Points.CountV));
                    }
                    else
                    {
                        nurbs.KnotsV.CreatePeriodicKnots(1.0 / (nurbs.Points.CountV));
                    }

                    if (!nurbs.IsValid)
                    {
                        throw new InvalidOperationException("Cannot create a valid NURBS surface: \n" + msg);
                    }
                }

                var rhNorm = nurbs.NormalAt(nurbs.Domain(0).Mid, nurbs.Domain(1).Mid);
                if (rh.Vector3d.Multiply(rhNorm, vecConv.FromPipe <rh.Vector3d, pp.Vec>(pns.SurfaceNormal)) < 0)
                {
                    //need not flip rhino surfaces
                }

                return(nurbs);
            }
                             ));
        }
コード例 #3
0
        public static Brep GetTrimmedBrep(pps.Surface surface, SurfaceConverter surfConv, CurveConverter curveConv)
        {
            var rhSurf = surfConv.FromPipe <Surface, pps.Surface>(surface);
            var brep   = Brep.CreateFromSurface(rhSurf);

            //if (!brep.IsValid) { brep.Repair(Rhino.RhinoMath.ZeroTolerance); }
            if (typeof(pps.NurbsSurface).IsAssignableFrom(surface.GetType()) &&
                ((pps.NurbsSurface)surface).TrimCurves.Count > 0)
            {
                List <ppc.Curve> trims = ((pps.NurbsSurface)surface).TrimCurves;
                List <ppc.Curve> loops = brep.Faces.First().Loops.Select((l) =>
                                                                         curveConv.ToPipe <Curve, ppc.Curve>(l.To3dCurve())).ToList();

                if (!PipeDataUtil.EqualIgnoreOrder(loops, trims))
                {
                    var rhTrims     = trims.Select((c) => curveConv.FromPipe <Curve, ppc.Curve>(c)).ToList();
                    var faceToSplit = brep.Faces.First();
                    var brep2       = faceToSplit.Split(rhTrims, Rhino.RhinoMath.ZeroTolerance);
                    //if (brep2 != null && !brep2.IsValid) { brep2.Repair(Rhino.RhinoMath.ZeroTolerance); }
                    if (brep2 != null && brep2.IsValid)
                    {
                        brep = GetEnclosedFacesAsBrep(brep2, rhTrims) ?? brep2;
                    }
                }
            }

            return(brep);
        }
コード例 #4
0
ファイル: RhinoPipeConverter.cs プロジェクト: yasenRK/ThePipe
        public BrepConverter(SurfaceConverter surfConv, CurveConverter curveConv, Point3dConverter ptConv) :
            base(
                (rb) => {
            List <pps.Surface> faces     = new List <pps.Surface>();
            List <List <int> > adjacency = new List <List <int> >();
            for (int i = 0; i < rb.Faces.Count; i++)
            {
                var surf = (pps.NurbsSurface)surfConv.ToPipe <rh.Surface, pps.Surface>(rb.Faces[i].ToNurbsSurface());
                surf.OuterTrims.Clear();
                surf.OuterTrims.AddRange(rb.Faces[i].Loops.Where((l) =>
                                                                 l.LoopType == rh.BrepLoopType.Outer).Select((l) =>
                                                                                                             curveConv.ToPipe <rh.Curve, ppc.Curve>(l.To3dCurve())));
                surf.InnerTrims.Clear();
                surf.InnerTrims.AddRange(rb.Faces[i].Loops.Where((l) =>
                                                                 l.LoopType == rh.BrepLoopType.Inner).Select((l) =>
                                                                                                             curveConv.ToPipe <rh.Curve, ppc.Curve>(l.To3dCurve())));

                faces.Add(surf);
                adjacency.Add(rb.Faces[i].AdjacentFaces().ToList());
            }
            var polySurf     = new pps.PolySurface(faces, adjacency);
            polySurf.IsSolid = rb.IsSolid;
            return(polySurf);
        },
                (pb) => {
            if (pb.Surfaces.Count <= 0)
            {
                return(null);
            }
            rh.Brep brep = null;
            int attempts = 0;
            while (attempts < 15)
            {
                if (pb.Surfaces.Count == 1)
                {
                    var surf = pb.Surfaces.FirstOrDefault();
                    brep     = Util.GetTrimmedBrep(surf, surfConv, curveConv);
                }
                else
                {
                    for (int i = 0; i < pb.Surfaces.Count; i++)
                    {
                        pps.Surface s = pb.Surfaces[i];
                        var subrep    = Util.GetTrimmedBrep(s, surfConv, curveConv);
                        //if (!subrep.IsValid) { subrep.Repair(Rhino.RhinoMath.ZeroTolerance); }
                        if (i == 0)
                        {
                            brep = subrep;
                        }
                        else
                        {
                            //brep = Brep.MergeSurfaces(brep, subrep, Rhino.RhinoMath.ZeroTolerance,
                            //    Rhino.RhinoMath.ZeroTolerance, Point2d.Unset, Point2d.Unset, 0.0, true) ??
                            //    Brep.MergeSurfaces(brep, subrep, Rhino.RhinoMath.ZeroTolerance, Rhino.RhinoMath.ZeroTolerance) ??
                            //    Brep.JoinBreps(new List<Brep>() { brep, subrep }, Rhino.RhinoMath.ZeroTolerance).First();
                            brep = rh.Brep.MergeBreps(new List <rh.Brep>()
                            {
                                brep, subrep
                            }, Rhino.RhinoMath.ZeroTolerance);
                        }
                    }
                }

                attempts += 1;
                //not doing anymore attempts if this time was successful
                if (brep.IsValid)
                {
                    break;
                }
            }

            string msg;
            if (!brep.IsValidWithLog(out msg))
            {
                System.Diagnostics.Debug.WriteLine(msg);
                attempts = 0;
                while (!brep.IsValid && attempts < 15)
                {
                    brep = rh.Brep.MergeBreps(pb.Surfaces.Select((s) =>
                                                                 rh.Brep.CreateFromSurface(surfConv.FromPipe <rh.Surface, pps.Surface>(s))),
                                              Rhino.RhinoMath.ZeroTolerance);
                    attempts += 1;
                }

                if (brep.IsValid)
                {
                    return(brep);
                }
                throw new InvalidOperationException("Failed to create a valid brep from " +
                                                    "received data because: \n" + msg);
            }
            return(brep);
        }
                )
        { }