public List <Brep> Compute()
{
globalBaseCrvLi = new List <Curve>(); // global parameter
globalTowerCrvLi = new List <Curve>(); // global parameter
globalPtCrvLi = new List <Point3d>();
double[] p = c2.DivideByCount(numDiv, true);
List <Point3d> ptLi = new List <Point3d>(); // points on the site boundary
for (int i = 0; i < p.Length; i++)
{
Point3d pts = c2.PointAt(p[i]);
ptLi.Add(pts);
globalPtCrvLi.Add(pts);
}
// GENERATE NORMALS FROM THE POINT - SCALE=SETBACK DISTANCE
List <LineCurve> lineLi = new List <LineCurve>();
for (int i = 0; i < ptLi.Count; i++)
{
Point3d P = Point3d.Unset;
Point3d Q = Point3d.Unset;
if (i == 0)
{
P = ptLi[ptLi.Count - 1];
Q = ptLi[0];
}
else
{
P = ptLi[i - 1];
Q = ptLi[i];
}
double sc = 1 / P.DistanceTo(Q);
double sc2 = OFFSET_INP;
double dx = P.X - (Q.Y - P.Y) * sc;
double dy = P.Y + (Q.X - P.X) * sc;
Point3d u = new Point3d(dx, dy, 0);
double dx2 = P.X - (Q.Y - P.Y) * sc * sc2;
double dy2 = P.Y + (Q.X - P.X) * sc * sc2;
double ex2 = P.X + (Q.Y - P.Y) * sc * sc2;
double ey2 = P.Y - (Q.X - P.X) * sc * sc2;
Point3d u2 = new Point3d(dx2, dy2, 0);
Point3d v2 = new Point3d(ex2, ey2, 0);
Rhino.Geometry.PointContainment contU = c2.Contains(u, Plane.WorldXY, Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance);
if (contU.ToString() == "Inside")
{
LineCurve linePu = new LineCurve(P, u2);
lineLi.Add(linePu);
}
else
{
LineCurve linePu = new LineCurve(P, v2);
lineLi.Add(linePu);
}
}
// FIND INTX - NORMAL x SETBACK CURVE; REMOVE OTHER NORMALS
List <LineCurve> fLineLi = new List <LineCurve>();
for (int i = 0; i < lineLi.Count; i++)
{
double t = Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance;
var evt = Rhino.Geometry.Intersect.Intersection.CurveCurve(OFFSET_CRV, lineLi[i], t, t);
try
{
Point3d A = lineLi[i].PointAtStart;
Point3d pA = evt[0].PointA;
LineCurve line = new LineCurve(A, pA);
fLineLi.Add(line);
}
catch (Exception) { }
}
// JOIN ADJACENT NORMAL SEGMENTS TO FORM POLYGONS
// 1st point is point on site, 2nd = normal @ setback dist
List <PolylineCurve> polyCrvLi = new List <PolylineCurve>();
for (int i = 0; i < lineLi.Count; i++)
{
if (i == 0)
{
LineCurve A = lineLi[lineLi.Count - 1];
LineCurve B = lineLi[0];
Point3d a0 = A.PointAtStart;
Point3d a1 = A.PointAtEnd;
Point3d b0 = B.PointAtStart;
Point3d b1 = B.PointAtEnd;
Point3d[] pts = { a0, b0, b1, a1, a0 };
PolylineCurve poly = new PolylineCurve(pts);
double ar2 = AreaMassProperties.Compute(poly).Area;
if (ar2 > minTowerAr)
{
polyCrvLi.Add(poly);
}
//polyCrvLi.Add(poly);
}
else
{
LineCurve A = lineLi[i - 1];
LineCurve B = lineLi[i];
Point3d a0 = A.PointAtStart;
Point3d a1 = A.PointAtEnd;
Point3d b0 = B.PointAtStart;
Point3d b1 = B.PointAtEnd;
Point3d[] pts = { a0, b0, b1, a1, a0 };
PolylineCurve poly = new PolylineCurve(pts);
double ar2 = AreaMassProperties.Compute(poly).Area;
if (ar2 > minTowerAr)
{
polyCrvLi.Add(poly);
}
//polyCrvLi.Add(poly);
}
}
double baseExtrHt = 0.0;
double spineHt = 0.0;
List <Brep> fbrepLi = new List <Brep>();
try
{ // BASE PROCESSES= EXTRUSION & COPY
double c2Area = AreaMassProperties.Compute(c2).Area;
double offsetArea = AreaMassProperties.Compute(OFFSET_CRV).Area;
double flrAr = c2Area - offsetArea;
int numFlrs2 = (int)(SITE_AR * baseFsr / flrAr) + 1;
baseExtrHt = numFlrs2 * flrHt;
for (int i = 0; i < numFlrs2; i++)
{
Curve c2_copy = c2.DuplicateCurve();
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.Translation(0, 0, spineHt);
c2_copy.Transform(xform);
Curve OFFSET_CRV_copy = OFFSET_CRV.DuplicateCurve();
OFFSET_CRV_copy.Transform(xform);
spineHt += flrHt;
globalBaseCrvLi.Add(c2_copy);
globalBaseCrvLi.Add(OFFSET_CRV_copy);
}
// base extrusions
Extrusion outerExtr = Rhino.Geometry.Extrusion.Create(c2, baseExtrHt, true);
var t0 = outerExtr.GetBoundingBox(true);
if (t0.Max.Z <= 0)
{
outerExtr = Rhino.Geometry.Extrusion.Create(c2, baseExtrHt, true);
}
Brep outerBrep = outerExtr.ToBrep();
Extrusion innerExtr = Rhino.Geometry.Extrusion.Create(OFFSET_CRV, -baseExtrHt, true);
var t1 = innerExtr.GetBoundingBox(true);
if (t1.Max.Z <= 0)
{
innerExtr = Rhino.Geometry.Extrusion.Create(OFFSET_CRV, baseExtrHt, true);
}
Brep innerBrep = innerExtr.ToBrep();
Brep[] netBrepArr = Brep.CreateBooleanDifference(outerBrep, innerBrep, 0.01);
Brep netBrep = netBrepArr[0];
fbrepLi.Add(netBrep);
}
catch (Exception) { }
// Tower POLY FOR THE TOWERS
List <Curve> towerPolyLi = new List <Curve>();
List <PolylineCurve> fPolyLi = new List <PolylineCurve>();
int numSel = numTowers;
double cumuArPoly = 0.0;
for (int i = 0; i < numSel; i++)
{
int idx = rnd.Next(polyCrvLi.Count);
fPolyLi.Add(polyCrvLi[idx]);
cumuArPoly += AreaMassProperties.Compute(polyCrvLi[idx]).Area;
}
// Tower POLY EXTRUSION
double towerHtReq = SITE_AR * towerFsr / cumuArPoly;
for (int i = 0; i < fPolyLi.Count; i++)
{
PolylineCurve crv = fPolyLi[i];
Extrusion extr0 = Extrusion.Create(crv, -towerHtReq * flrHt, true);
var t0 = extr0.GetBoundingBox(true);
if (t0.Max.Z <= 0)
{
extr0 = Extrusion.Create(crv, towerHtReq * flrHt, true);
}
Brep brep = extr0.ToBrep();
Transform xform = Rhino.Geometry.Transform.Translation(0, 0, baseExtrHt);
brep.Transform(xform);
fbrepLi.Add(brep);
}
// Tower POLY FLOOR COPIES
// spineHt initialized above & updated from base curve copies
int numFlrs = (int)(SITE_AR * towerFsr / cumuArPoly) + 1;
for (int i = 0; i < numFlrs; i++)
{
for (int j = 0; j < fPolyLi.Count; j++)
{
Curve crv = fPolyLi[j].DuplicateCurve();
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.Translation(0, 0, spineHt);
crv.Transform(xform);
globalTowerCrvLi.Add(crv);
}
spineHt += flrHt;
}
return(fbrepLi);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
Curve site_ = null;
double setback = double.NaN;
double OFFSET_INP = double.NaN;
double baseFsr = double.NaN;
double towerFsr = double.NaN;
int numDiv = 10;
int numTowers = 7;
double flrHt = double.NaN;
double minSiteAr = double.NaN;
double minTowerAr = double.NaN;
if (!DA.GetData(0, ref site_))
{
return;
}
if (!DA.GetData(1, ref setback))
{
return;
}
if (!DA.GetData(2, ref OFFSET_INP))
{
return;
}
if (!DA.GetData(3, ref numDiv))
{
return;
}
if (!DA.GetData(4, ref numTowers))
{
return;
}
if (!DA.GetData(5, ref flrHt))
{
return;
}
if (!DA.GetData(6, ref baseFsr))
{
return;
}
if (!DA.GetData(7, ref towerFsr))
{
return;
}
if (!DA.GetData(8, ref minSiteAr))
{
return;
}
if (!DA.GetData(9, ref minTowerAr))
{
return;
}
Curve site = Rhino.Geometry.Curve.ProjectToPlane(site_, Plane.WorldXY);
//CHECKS FOR THE SITE-SETBACK AND MIN SITE AREA1
double siteAr = AreaMassProperties.Compute(site).Area;
SITE_AR = AreaMassProperties.Compute(site).Area;
Point3d site_cen = AreaMassProperties.Compute(site).Centroid;
if (siteAr < minSiteAr)
{
return; // area restraint
}
Curve[] site_setback_crv = site.Offset(site_cen, Vector3d.ZAxis, setback,
Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance, CurveOffsetCornerStyle.Sharp);
if (site_setback_crv.Length != 1)
{
return; // rational offset restraint
}
//OFFSET FROM THE SITE BOUNDARY
Curve c2 = site_setback_crv[0].DuplicateCurve(); // duplicate of setback curve : outer boundary of building
Curve[] c2Offs;
Point3d cen = AreaMassProperties.Compute(c2).Centroid;
Rhino.Geometry.PointContainment cont = site.Contains(cen, Plane.WorldXY,
Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance);
if (cont.ToString() == "Inside")
{
c2Offs = c2.Offset(cen, Vector3d.ZAxis, OFFSET_INP, 0.01, CurveOffsetCornerStyle.Sharp);
}
else
{
c2Offs = c2.Offset(cen, Vector3d.ZAxis, -OFFSET_INP, 0.01, CurveOffsetCornerStyle.Sharp);
}
DA.SetData(4, cont); // ----------------------------------------------
Curve OFFSET_CRV = c2Offs[0]; //inner boundary of building
if (c2Offs.Length != 1)
{
return;
}
DA.SetData(0, OFFSET_CRV);
Polyline outer_crv;
Polyline inner_crv;
bool t0 = c2.TryGetPolyline(out outer_crv);
bool t1 = OFFSET_CRV.TryGetPolyline(out inner_crv);
List <Brep> fbrepLi = new List <Brep>();
if (t0 == true && SITE_AR > minSiteAr)
{
debugMsg += "in poly solver";
List <Point3d> outerPtLi = new List <Point3d>();
IEnumerator <Point3d> outerPts = outer_crv.GetEnumerator();
while (outerPts.MoveNext())
{
outerPtLi.Add(outerPts.Current);
}
List <Point3d> innerPtLi = new List <Point3d>();
IEnumerator <Point3d> innerPts = inner_crv.GetEnumerator();
while (innerPts.MoveNext())
{
innerPtLi.Add(innerPts.Current);
}
PolylineCurve outerPoly = new PolylineCurve(outerPtLi);
double t = (double)(1.00 / numDiv);
if (t < 1.0 && t > 0.005)
{
int numDivisionPts = (int)numDiv;
fbrepLi = SolveForPolyLineCrv(outerPtLi, innerPtLi, numDivisionPts, numTowers,
flrHt, OFFSET_INP, baseFsr, towerFsr, minTowerAr);
}
}
else
{
if (SITE_AR > minSiteAr)
{
fbrepLi = SolveForSmoothCrv(c2, OFFSET_CRV, numDiv, numTowers,
flrHt, OFFSET_INP, baseFsr, towerFsr, minTowerAr);
}
}
DA.SetDataList(4, debugMsg); // ----------------------------------------------
DA.SetDataList(5, fbrepLi); // ----------------------------------------------
DA.SetDataList(1, globalBaseCrvLi);
DA.SetDataList(2, globalTowerCrvLi);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
List <Curve> sites = new List <Curve>();
double fsr = double.NaN;
double setback = double.NaN;
double flrHt = double.NaN;
double minAr = double.NaN;
double slendernessRatio = double.NaN;
if (!DA.GetDataList(0, sites))
{
return;
}
if (!DA.GetData(1, ref setback))
{
return;
}
if (!DA.GetData(2, ref fsr))
{
return;
}
if (!DA.GetData(3, ref flrHt))
{
return;
}
if (!DA.GetData(4, ref minAr))
{
return;
}
if (!DA.GetData(5, ref slendernessRatio))
{
return;
}
List <Extrusion> massLi = new List <Extrusion>();
List <List <Curve> > listFlrCrvLi = new List <List <Curve> >();
List <Curve> flrCrvLi = new List <Curve>();
string msg = "";
msg += "\nfsr: " + fsr.ToString();
msg += "\nsetback: " + setback.ToString();
string MSG = "Debug BLOCK:\n";
for (int i = 0; i < sites.Count; i++)
{
//OFFSET FROM THE SITE BOUNDARY
Curve c1 = sites[i].DuplicateCurve();
Curve c2 = Rhino.Geometry.Curve.ProjectToPlane(c1, Plane.WorldXY);
Curve[] c2Offs;
Point3d cen = AreaMassProperties.Compute(c2).Centroid;
Rhino.Geometry.PointContainment cont = sites[i].Contains(cen, Plane.WorldXY, Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance);
if (cont.ToString() == "Inside")
{
c2Offs = c2.Offset(cen, Vector3d.ZAxis, setback, 0.01, CurveOffsetCornerStyle.Sharp);
}
else
{
c2Offs = c2.Offset(cen, Vector3d.ZAxis, -setback, 0.01, CurveOffsetCornerStyle.Sharp);
}
try
{
if (c2Offs.Length == 1)
{
Curve OFFSET_CRV_ = c2Offs[0];
Curve OFFSET_CRV = Curve.ProjectToPlane(OFFSET_CRV_, Plane.WorldXY);
double arSite = Rhino.Geometry.AreaMassProperties.Compute(sites[i]).Area;
double arOffset = AreaMassProperties.Compute(OFFSET_CRV).Area; // 1 floor
double num_flrs = fsr * arSite / arOffset;
double ht = num_flrs * flrHt;
double gotSlendernessRatio = ht / arOffset;
if (gotSlendernessRatio < slendernessRatio)
{
msg += "\nExceeded slenderness ratio";
}
else if (arOffset <= minAr)
{
msg += "\nar site: " + arSite.ToString() + "\nar offset: " + arOffset.ToString() + "\nht: " + ht.ToString();
}
else
{
Vector3d vec = new Vector3d(0, 0, ht);
Curve c3 = Rhino.Geometry.Curve.ProjectToPlane(OFFSET_CRV, Plane.WorldXY);
Extrusion mass = Rhino.Geometry.Extrusion.Create(c3, ht, true);
var B = mass.GetBoundingBox(true);
MSG += "Z = " + B.Max.Z.ToString() + ", " + B.Min.Z.ToString();
if (B.Max.Z <= 0.01)
{
mass = Extrusion.Create(c3, -ht, true);
}
massLi.Add(mass);
for (int j = 0; j < num_flrs; j++)
{
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.Translation(0, 0, j * flrHt);
Curve c4 = c3.DuplicateCurve();
c4.Transform(xform);
flrCrvLi.Add(c4);
}
}
}
}
catch (Exception) { }
//listFlrCrvLi.Add(flrCrvLi);
}
DA.SetDataList(0, massLi);
DA.SetDataList(1, flrCrvLi);
// DA.SetData(2, msg);
// DA.SetData(3, MSG);
}
