/// <summary>
/// The implementation of CreateSash(),and creating the Window Sash Solid Geometry
/// </summary>
public override void CreateSash()
{
double frameCurveOffset1 = 0.075;
double frameDepth = 7 * m_wallThickness / 12 + m_windowInset;
double sashCurveOffset = 0.075;
double sashDepth = (frameDepth - m_windowInset) / 2;
//get the exterior view and sash referenceplane which are used in this process
Autodesk.Revit.DB.View exteriorView = Utility.GetViewByName("Exterior", m_application, m_document);
SubTransaction subTransaction = new SubTransaction(m_document);
subTransaction.Start();
//add a middle reference plane between the top referenceplane and sill referenceplane
CreateRefPlane refPlaneCreator = new CreateRefPlane();
ReferencePlane middlePlane = refPlaneCreator.Create(m_document, m_topPlane, exteriorView, new Autodesk.Revit.DB.XYZ(0, 0, -m_height / 2), new Autodesk.Revit.DB.XYZ(0, -1, 0), "tempmiddle");
m_document.Regenerate();
//add dimension between top, sill, and middle reference plane, make the dimension segment equal
Dimension dim = m_dimensionCreator.AddDimension(exteriorView, m_topPlane, m_sillPlane, middlePlane);
dim.AreSegmentsEqual = true;
//create first sash
CurveArray curveArr5 = m_extrusionCreator.CreateRectangle(m_width / 2 - frameCurveOffset1, -m_width / 2 + frameCurveOffset1, m_sillHeight + m_height / 2 + sashCurveOffset / 2, m_sillHeight + frameCurveOffset1, 0);
CurveArray curveArr6 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr5, sashCurveOffset);
m_document.Regenerate();
CurveArrArray curveArrArray3 = new CurveArrArray();
curveArrArray3.Append(curveArr5);
curveArrArray3.Append(curveArr6);
Extrusion sash1 = m_extrusionCreator.NewExtrusion(curveArrArray3, m_sashPlane, 2 * sashDepth, sashDepth);
m_document.Regenerate();
Face esashFace1 = GeoHelper.GetExtrusionFace(sash1, m_rightView, true);
Face isashFace1 = GeoHelper.GetExtrusionFace(sash1, m_rightView, false);
Dimension sashDim1 = m_dimensionCreator.AddDimension(m_rightView, esashFace1, isashFace1);
sashDim1.IsLocked = true;
Dimension sashWithPlane1 = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, isashFace1);
sashWithPlane1.IsLocked = true;
sash1.SetVisibility(CreateVisibility());
//create second sash
CurveArray curveArr7 = m_extrusionCreator.CreateRectangle(m_width / 2 - frameCurveOffset1, -m_width / 2 + frameCurveOffset1, m_sillHeight + m_height - frameCurveOffset1, m_sillHeight + m_height / 2 - sashCurveOffset / 2, 0);
CurveArray curveArr8 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr7, sashCurveOffset);
m_document.Regenerate();
CurveArrArray curveArrArray4 = new CurveArrArray();
curveArrArray4.Append(curveArr7);
curveArrArray4.Append(curveArr8);
Extrusion sash2 = m_extrusionCreator.NewExtrusion(curveArrArray4, m_sashPlane, sashDepth, 0);
sash2.SetVisibility(CreateVisibility());
m_document.Regenerate();
Face esashFace2 = GeoHelper.GetExtrusionFace(sash2, m_rightView, true);
Face isashFace2 = GeoHelper.GetExtrusionFace(sash2, m_rightView, false);
Dimension sashDim2 = m_dimensionCreator.AddDimension(m_rightView, esashFace2, isashFace2);
sashDim2.IsLocked = true;
Dimension sashWithPlane2 = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, isashFace2);
m_document.Regenerate();
sashWithPlane2.IsLocked = true;
//set category of the sash extrusions
if (m_frameCat != null)
{
sash1.Subcategory = m_frameCat;
sash2.Subcategory = m_frameCat;
}
Autodesk.Revit.DB.ElementId id = m_sashMatID;
sash1.get_Parameter(BuiltInParameter.MATERIAL_ID_PARAM).Set(id);
sash2.get_Parameter(BuiltInParameter.MATERIAL_ID_PARAM).Set(id);
subTransaction.Commit();
}
/// <summary>
/// The implementation of CreateSash(),and creating the Window Sash Solid Geometry
/// </summary>
public override void CreateSash()
{
double frameCurveOffset1 = 0.075;
double frameDepth = 7*m_wallThickness/12+m_windowInset;
double sashCurveOffset = 0.075;
double sashDepth = (frameDepth - m_windowInset) / 2;
//get the exterior view and sash referenceplane which are used in this process
Autodesk.Revit.DB.View exteriorView = Utility.GetViewByName("Exterior", m_application, m_document);
SubTransaction subTransaction = new SubTransaction(m_document);
subTransaction.Start();
//add a middle reference plane between the top referenceplane and sill referenceplane
CreateRefPlane refPlaneCreator = new CreateRefPlane();
ReferencePlane middlePlane=refPlaneCreator.Create(m_document, m_topPlane, exteriorView, new Autodesk.Revit.DB.XYZ (0, 0, -m_height / 2), new Autodesk.Revit.DB.XYZ (0, -1, 0), "tempmiddle");
m_document.Regenerate();
//add dimension between top, sill, and middle reference plane, make the dimension segment equal
Dimension dim = m_dimensionCreator.AddDimension(exteriorView, m_topPlane, m_sillPlane, middlePlane);
dim.AreSegmentsEqual = true;
//create first sash
CurveArray curveArr5 = m_extrusionCreator.CreateRectangle(m_width / 2 - frameCurveOffset1, -m_width / 2 + frameCurveOffset1, m_sillHeight + m_height / 2 + sashCurveOffset / 2, m_sillHeight + frameCurveOffset1, 0);
CurveArray curveArr6 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr5, sashCurveOffset);
m_document.Regenerate();
CurveArrArray curveArrArray3 = new CurveArrArray();
curveArrArray3.Append(curveArr5);
curveArrArray3.Append(curveArr6);
Extrusion sash1 = m_extrusionCreator.NewExtrusion(curveArrArray3, m_sashPlane, 2 * sashDepth, sashDepth);
m_document.Regenerate();
Face esashFace1=GeoHelper.GetExtrusionFace(sash1,m_rightView,true);
Face isashFace1=GeoHelper.GetExtrusionFace(sash1,m_rightView,false);
Dimension sashDim1=m_dimensionCreator.AddDimension(m_rightView,esashFace1,isashFace1);
sashDim1.IsLocked = true;
Dimension sashWithPlane1 = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, isashFace1);
sashWithPlane1.IsLocked = true;
sash1.SetVisibility(CreateVisibility());
//create second sash
CurveArray curveArr7 = m_extrusionCreator.CreateRectangle(m_width / 2 - frameCurveOffset1, -m_width / 2 + frameCurveOffset1, m_sillHeight + m_height - frameCurveOffset1, m_sillHeight + m_height / 2 - sashCurveOffset / 2, 0);
CurveArray curveArr8 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr7, sashCurveOffset);
m_document.Regenerate();
CurveArrArray curveArrArray4 = new CurveArrArray();
curveArrArray4.Append(curveArr7);
curveArrArray4.Append(curveArr8);
Extrusion sash2 = m_extrusionCreator.NewExtrusion(curveArrArray4, m_sashPlane, sashDepth, 0);
sash2.SetVisibility(CreateVisibility());
m_document.Regenerate();
Face esashFace2 = GeoHelper.GetExtrusionFace(sash2, m_rightView, true);
Face isashFace2 = GeoHelper.GetExtrusionFace(sash2, m_rightView, false);
Dimension sashDim2 = m_dimensionCreator.AddDimension(m_rightView, esashFace2, isashFace2);
sashDim2.IsLocked = true;
Dimension sashWithPlane2 = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, isashFace2);
m_document.Regenerate();
sashWithPlane2.IsLocked = true;
//set category of the sash extrusions
if (m_frameCat != null)
{
sash1.Subcategory = m_frameCat;
sash2.Subcategory = m_frameCat;
}
Autodesk.Revit.DB.ElementId id = new ElementId(m_sashMatID);
sash1.ParametersMap.get_Item("Material").Set(id);
sash2.ParametersMap.get_Item("Material").Set(id);
subTransaction.Commit();
}
/// <summary>
/// The implementation of CreateFrame()
/// </summary>
public override void CreateFrame()
{
SubTransaction subTransaction = new SubTransaction(m_document);
subTransaction.Start();
//create sash referenceplane and exterior referenceplane
CreateRefPlane refPlaneCreator = new CreateRefPlane();
if (m_sashPlane == null)
{
m_sashPlane = refPlaneCreator.Create(m_document, m_centerPlane, m_rightView, new Autodesk.Revit.DB.XYZ(0, m_wallThickness / 2 - m_windowInset, 0), new Autodesk.Revit.DB.XYZ(0, 0, 1), "Sash");
}
if (m_exteriorPlane == null)
{
m_exteriorPlane = refPlaneCreator.Create(m_document, m_centerPlane, m_rightView, new Autodesk.Revit.DB.XYZ(0, m_wallThickness / 2, 0), new Autodesk.Revit.DB.XYZ(0, 0, 1), "MyExterior");
}
m_document.Regenerate();
//get the wall in the document and retrieve the exterior face
List <Wall> walls = Utility.GetElements <Wall>(m_application, m_document);
Face exteriorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, true);
if (exteriorWallFace == null)
{
return;
}
//add dimension between sash reference plane and wall face,and add parameter "Window Inset",label the dimension with window-inset parameter
Dimension windowInsetDimension = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, exteriorWallFace);
FamilyParameter windowInsetPara = m_familyManager.AddParameter("Window Inset", new ForgeTypeId(), SpecTypeId.Length, false);
m_familyManager.Set(windowInsetPara, m_windowInset);
windowInsetDimension.FamilyLabel = windowInsetPara;
//create the exterior frame
double frameCurveOffset1 = 0.075;
CurveArray curveArr1 = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + m_height, m_sillHeight, 0);
CurveArray curveArr2 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr1, frameCurveOffset1);
CurveArrArray curveArrArray1 = new CurveArrArray();
curveArrArray1.Append(curveArr1);
curveArrArray1.Append(curveArr2);
Extrusion extFrame = m_extrusionCreator.NewExtrusion(curveArrArray1, m_sashPlane, m_wallThickness / 2 + m_wallThickness / 12, -m_windowInset);
extFrame.SetVisibility(CreateVisibility());
m_document.Regenerate();
//add alignment between wall face and exterior frame face
exteriorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, true); // Get the face again as the document is regenerated.
Face exteriorExtrusionFace1 = GeoHelper.GetExtrusionFace(extFrame, m_rightView, true);
Face interiorExtrusionFace1 = GeoHelper.GetExtrusionFace(extFrame, m_rightView, false);
CreateAlignment alignmentCreator = new CreateAlignment(m_document);
alignmentCreator.AddAlignment(m_rightView, exteriorWallFace, exteriorExtrusionFace1);
//add dimension between sash referenceplane and exterior frame face and lock the dimension
Dimension extFrameWithSashPlane = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, interiorExtrusionFace1);
extFrameWithSashPlane.IsLocked = true;
m_document.Regenerate();
//create the interior frame
double frameCurveOffset2 = 0.125;
CurveArray curveArr3 = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + m_height, m_sillHeight, 0);
CurveArray curveArr4 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr3, frameCurveOffset2);
m_document.Regenerate();
CurveArrArray curveArrArray2 = new CurveArrArray();
curveArrArray2.Append(curveArr3);
curveArrArray2.Append(curveArr4);
Extrusion intFrame = m_extrusionCreator.NewExtrusion(curveArrArray2, m_sashPlane, m_wallThickness - m_windowInset, m_wallThickness / 2 + m_wallThickness / 12);
intFrame.SetVisibility(CreateVisibility());
m_document.Regenerate();
//add alignment between interior face of wall and interior frame face
Face interiorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, false);
Face interiorExtrusionFace2 = GeoHelper.GetExtrusionFace(intFrame, m_rightView, false);
Face exteriorExtrusionFace2 = GeoHelper.GetExtrusionFace(intFrame, m_rightView, true);
alignmentCreator.AddAlignment(m_rightView, interiorWallFace, interiorExtrusionFace2);
//add dimension between sash referenceplane and interior frame face and lock the dimension
Dimension intFrameWithSashPlane = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, exteriorExtrusionFace2);
intFrameWithSashPlane.IsLocked = true;
//create the sill frame
CurveArray sillCurs = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + frameCurveOffset1, m_sillHeight, 0);
CurveArrArray sillCurveArray = new CurveArrArray();
sillCurveArray.Append(sillCurs);
Extrusion sillFrame = m_extrusionCreator.NewExtrusion(sillCurveArray, m_sashPlane, -m_windowInset, -m_windowInset - 0.1);
m_document.Regenerate();
//add alignment between wall face and sill frame face
exteriorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, true); // Get the face again as the document is regenerated.
Face sillExtFace = GeoHelper.GetExtrusionFace(sillFrame, m_rightView, false);
alignmentCreator.AddAlignment(m_rightView, sillExtFace, exteriorWallFace);
m_document.Regenerate();
//set subcategories of the frames
if (m_frameCat != null)
{
extFrame.Subcategory = m_frameCat;
intFrame.Subcategory = m_frameCat;
sillFrame.Subcategory = m_frameCat;
}
subTransaction.Commit();
}
/// <summary>
/// The implementation of CreateFrame()
/// </summary>
public override void CreateFrame()
{
SubTransaction subTransaction = new SubTransaction(m_document);
subTransaction.Start();
//get the wall in the document and retrieve the exterior face
List<Wall> walls = Utility.GetElements<Wall>(m_application, m_document);
Face exteriorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, true);
//create sash referenceplane and exterior referenceplane
CreateRefPlane refPlaneCreator = new CreateRefPlane();
if(m_sashPlane==null)
m_sashPlane = refPlaneCreator.Create(m_document, m_centerPlane, m_rightView, new Autodesk.Revit.DB.XYZ (0, m_wallThickness / 2 - m_windowInset, 0), new Autodesk.Revit.DB.XYZ (0, 0, 1), "Sash");
if (m_exteriorPlane==null)
m_exteriorPlane = refPlaneCreator.Create(m_document, m_centerPlane, m_rightView, new Autodesk.Revit.DB.XYZ (0, m_wallThickness / 2, 0), new Autodesk.Revit.DB.XYZ (0, 0, 1), "MyExterior");
m_document.Regenerate();
//add dimension between sash reference plane and wall face,and add parameter "Window Inset",label the dimension with window-inset parameter
Dimension windowInsetDimension = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, exteriorWallFace);
FamilyParameter windowInsetPara = m_familyManager.AddParameter("Window Inset", BuiltInParameterGroup.INVALID, ParameterType.Length, false);
m_familyManager.Set(windowInsetPara, m_windowInset);
windowInsetDimension.Label = windowInsetPara;
//create the exterior frame
double frameCurveOffset1 = 0.075;
CurveArray curveArr1 = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + m_height, m_sillHeight, 0);
CurveArray curveArr2 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr1, frameCurveOffset1);
CurveArrArray curveArrArray1 = new CurveArrArray();
curveArrArray1.Append(curveArr1);
curveArrArray1.Append(curveArr2);
Extrusion extFrame = m_extrusionCreator.NewExtrusion(curveArrArray1, m_sashPlane, m_wallThickness / 2 + m_wallThickness/12, -m_windowInset);
extFrame.SetVisibility( CreateVisibility());
m_document.Regenerate();
//add alignment between wall face and exterior frame face
Face exteriorExtrusionFace1=GeoHelper.GetExtrusionFace(extFrame,m_rightView,true);
Face interiorExtrusionFace1 = GeoHelper.GetExtrusionFace(extFrame,m_rightView,false);
CreateAlignment alignmentCreator = new CreateAlignment(m_document);
alignmentCreator.AddAlignment(m_rightView,exteriorWallFace,exteriorExtrusionFace1);
//add dimension between sash referenceplane and exterior frame face and lock the dimension
Dimension extFrameWithSashPlane = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, interiorExtrusionFace1);
extFrameWithSashPlane.IsLocked = true;
m_document.Regenerate();
//create the interior frame
double frameCurveOffset2 = 0.125;
CurveArray curveArr3 = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + m_height, m_sillHeight, 0);
CurveArray curveArr4 = m_extrusionCreator.CreateCurveArrayByOffset(curveArr3, frameCurveOffset2);
m_document.Regenerate();
CurveArrArray curveArrArray2 = new CurveArrArray();
curveArrArray2.Append(curveArr3);
curveArrArray2.Append(curveArr4);
Extrusion intFrame = m_extrusionCreator.NewExtrusion(curveArrArray2, m_sashPlane, m_wallThickness - m_windowInset, m_wallThickness / 2 + m_wallThickness / 12);
intFrame.SetVisibility( CreateVisibility());
m_document.Regenerate();
//add alignment between interior face of wall and interior frame face
Face interiorWallFace = GeoHelper.GetWallFace(walls[0], m_rightView, false);
Face interiorExtrusionFace2 = GeoHelper.GetExtrusionFace(intFrame, m_rightView, false);
Face exteriorExtrusionFace2 = GeoHelper.GetExtrusionFace(intFrame, m_rightView, true);
alignmentCreator.AddAlignment(m_rightView, interiorWallFace, interiorExtrusionFace2);
//add dimension between sash referenceplane and interior frame face and lock the dimension
Dimension intFrameWithSashPlane = m_dimensionCreator.AddDimension(m_rightView, m_sashPlane, exteriorExtrusionFace2);
intFrameWithSashPlane.IsLocked = true;
//create the sill frame
CurveArray sillCurs = m_extrusionCreator.CreateRectangle(m_width / 2, -m_width / 2, m_sillHeight + frameCurveOffset1, m_sillHeight, 0);
CurveArrArray sillCurveArray = new CurveArrArray();
sillCurveArray.Append(sillCurs);
Extrusion sillFrame= m_extrusionCreator.NewExtrusion(sillCurveArray, m_sashPlane, -m_windowInset, -m_windowInset - 0.1);
m_document.Regenerate();
//add alignment between wall face and sill frame face
Face sillExtFace = GeoHelper.GetExtrusionFace(sillFrame, m_rightView, false);
alignmentCreator.AddAlignment(m_rightView, sillExtFace, exteriorWallFace);
m_document.Regenerate();
//set subcategories of the frames
if (m_frameCat != null)
{
extFrame.Subcategory = m_frameCat;
intFrame.Subcategory = m_frameCat;
sillFrame.Subcategory = m_frameCat;
}
subTransaction.Commit();
}