/// <summary>
/// Create the CorbelFrame object with the given trapezoid face, corbel and its host information.
/// </summary>
/// <param name="corbel">Corbel instance</param>
/// <param name="depthEdge">Depth Edge which is vertical with trapezoid face</param>
/// <param name="leftEdge">Left edge of trapezoid</param>
/// <param name="bottomEdge">Bottom edge of trapezoid</param>
/// <param name="rightEdge">Right edge of trapezoid</param>
/// <param name="topEdge">Top edge of trapezoid</param>
/// <param name="revitDoc">Revit Document</param>
/// <param name="trapezoidFace">Trapezoid Face</param>
/// <param name="hostDepth">Corbel Host depth</param>
/// <param name="hostTopCoverDistance">Corbel Host Top face cover distance</param>
/// <returns>CorbelFrame object</returns>
private static CorbelFrame ConstructCorbelFrame(
FamilyInstance corbel,
Edge depthEdge, Edge leftEdge, Edge bottomEdge, Edge rightEdge, Edge topEdge,
Document revitDoc, PlanarFace trapezoidFace,
double hostDepth, double hostTopCoverDistance)
{
XYZ leftEdgeDir = (leftEdge.Evaluate(1.0) - leftEdge.Evaluate(0.0)).Normalize();
XYZ leftEdgeV0 = leftEdge.Evaluate(0.0);
Line leftEdgeLine = Line.get_Unbound(leftEdgeV0, leftEdgeDir);
XYZ rightEdgeDir = (rightEdge.Evaluate(1.0) - rightEdge.Evaluate(0.0)).Normalize();
XYZ rightEdgeV0 = rightEdge.Evaluate(0.0);
Line rightEdgeLine = Line.get_Unbound(rightEdgeV0, rightEdgeDir);
XYZ topEdgeDir = (topEdge.Evaluate(1.0) - topEdge.Evaluate(0.0)).Normalize();
XYZ topEdgeV0 = topEdge.Evaluate(0.0);
Line topEdgeLine = Line.get_Unbound(topEdgeV0, topEdgeDir);
IntersectionResultArray intersections;
topEdgeLine.Intersect(leftEdgeLine, out intersections);
XYZ prevX = intersections.get_Item(0).XYZPoint;
topEdgeLine.Intersect(rightEdgeLine, out intersections);
XYZ nextX = intersections.get_Item(0).XYZPoint;
XYZ edgeV0 = GetCommonVertex(bottomEdge, leftEdge);
XYZ edgeV1 = GetCommonVertex(bottomEdge, rightEdge);
Line topBoundLine = Line.get_Bound(nextX, prevX);
Line leftBoundLine = Line.get_Bound(prevX, edgeV0);
Line bottomBoundLine = Line.get_Bound(edgeV0, edgeV1);
Line rightBoundLine = Line.get_Bound(edgeV1, nextX);
Trapezoid profile = new Trapezoid(topBoundLine, leftBoundLine, bottomBoundLine, rightBoundLine);
XYZ depthEdgeV0 = depthEdge.Evaluate(0.0);
XYZ depthEdgeV1 = depthEdge.Evaluate(1.0);
Line depthLine = null;
if (depthEdgeV0.IsAlmostEqualTo(edgeV0))
{
depthLine = Line.get_Bound(depthEdgeV0, depthEdgeV1);
}
else if (depthEdgeV1.IsAlmostEqualTo(edgeV0))
{
depthLine = Line.get_Bound(depthEdgeV1, depthEdgeV0);
}
CorbelFrame frame = new CorbelFrame(corbel, profile, depthLine, hostDepth, hostTopCoverDistance);
return(frame);
}
/// <summary>
/// Constructor to initialize the fields.
/// </summary>
/// <param name="corbel">Corbel family instance</param>
/// <param name="profile">Trapezoid profile</param>
/// <param name="path">Extrusion Line</param>
/// <param name="hostDepth">Corbel Host Depth</param>
/// <param name="hostTopCorverDistance">Corbel Host cover distance</param>
public CorbelFrame(FamilyInstance corbel, Trapezoid profile,
Line path, double hostDepth, double hostTopCorverDistance)
{
m_profile = profile;
m_extrusionLine = path;
m_corbel = corbel;
m_hostDepth = hostDepth;
m_hostCoverDistance = hostTopCorverDistance;
// Get the cover distance of corbel from CommonCoverType.
RebarHostData rebarHost = RebarHostData.GetRebarHostData(m_corbel);
m_corbelCoverDistance = rebarHost.GetCommonCoverType().CoverDistance;
}
/// <summary>
/// Constructor to initialize the fields.
/// </summary>
/// <param name="corbel">Corbel family instance</param>
/// <param name="profile">Trapezoid profile</param>
/// <param name="path">Extrusion Line</param>
/// <param name="hostDepth">Corbel Host Depth</param>
/// <param name="hostTopCorverDistance">Corbel Host cover distance</param>
public CorbelFrame(FamilyInstance corbel, Trapezoid profile,
Line path, double hostDepth, double hostTopCorverDistance)
{
m_profile = profile;
m_extrusionLine = path;
m_corbel = corbel;
m_hostDepth = hostDepth;
m_hostCoverDistance = hostTopCorverDistance;
// Get the cover distance of corbel from CommonCoverType.
RebarHostData rebarHost = RebarHostData.GetRebarHostData(m_corbel);
m_corbelCoverDistance = rebarHost.GetCommonCoverType().CoverDistance;
}
/// <summary>
/// Add a multi-planar bar into corbel with given options.
/// </summary>
/// <param name="options">Options for Rebar Creation</param>
private void PlaceMultiplanarRebar(CorbelReinforcementOptions options)
{
Trapezoid profileCopy = m_profile.Clone();
profileCopy.OffsetTop(-m_corbelCoverDistance
- options.StirrupBarType.BarDiameter - 0.5 * options.MultiplanarBarType.BarDiameter);
profileCopy.OffsetLeft(-m_corbelCoverDistance - 0.5 * options.MultiplanarBarType.BarDiameter);
profileCopy.OffsetBottom(m_hostDepth - m_hostCoverDistance
- options.HostStraightBarType.BarDiameter * 4
- options.StirrupBarType.BarDiameter);
profileCopy.OffsetRight(-m_corbelCoverDistance - options.StirrupBarType.BarDiameter
- 0.5 * options.StirrupBarType.BarDiameter);
//m_profile.Draw(options.RevitDoc);
//profileCopy.Draw(options.RevitDoc);
XYZ origin, vx, vy;
profileCopy.Boundary(out origin, out vx, out vy);
XYZ vecX = vx.Normalize();
XYZ vecY = vy.Normalize();
RebarShape barshape = profileCopy.ConstructMultiplanarRebarShape(options.RevitDoc,
0.5 * options.MultiplanarBarType.StirrupTieBendDiameter);
Rebar newRebar = Rebar.CreateFromRebarShape(
options.RevitDoc, barshape,
options.MultiplanarBarType,
m_corbel, origin, vecX, vecY);
XYZ extruDir = (m_extrusionLine.GetEndPoint(1) - m_extrusionLine.GetEndPoint(0)).Normalize();
double offset = m_corbelCoverDistance +
options.StirrupBarType.BarDiameter +
0.5 * options.MultiplanarBarType.BarDiameter;
newRebar.ScaleToBoxFor3D(origin + extruDir * (m_extrusionLine.Length - offset),
vx, vy, m_extrusionLine.Length - 2 * offset);
ShowRebar3d(newRebar);
}
/// <summary>
/// Add straight bars into corbel with given options.
/// </summary>
/// <param name="options">Options for Rebar Creation</param>
private void PlaceStraightBars(CorbelReinforcementOptions options)
{
Trapezoid profileCopy = m_profile.Clone();
profileCopy.OffsetTop(-m_corbelCoverDistance);
profileCopy.OffsetLeft(-m_corbelCoverDistance
- options.MultiplanarBarType.BarDiameter
- options.TopBarType.BarDiameter * 0.5);
profileCopy.OffsetBottom(m_hostDepth - m_hostCoverDistance
- options.StirrupBarType.BarDiameter
- options.HostStraightBarType.BarDiameter);
profileCopy.OffsetRight(-m_corbelCoverDistance);
//m_profile.Draw(options.RevitDoc);
//profileCopy.Draw(options.RevitDoc);
XYZ extruDir = (m_extrusionLine.GetEndPoint(1) - m_extrusionLine.GetEndPoint(0)).Normalize();
double offset = m_corbelCoverDistance +
options.StirrupBarType.BarDiameter +
options.MultiplanarBarType.BarDiameter +
0.5 * options.TopBarType.BarDiameter;
Line vetical = profileCopy.Vertical;
XYZ delta = extruDir * offset;
Curve barLine = Line.CreateBound(vetical.GetEndPoint(1) + delta, vetical.GetEndPoint(0) + delta);
IList <Curve> barCurves = new List <Curve>();
barCurves.Add(barLine);
Rebar bars = Rebar.CreateFromCurves(options.RevitDoc, RebarStyle.Standard,
options.TopBarType, null, null, m_corbel, extruDir, barCurves,
RebarHookOrientation.Left, RebarHookOrientation.Left, true, true);
bars.SetLayoutAsFixedNumber(options.TopBarCount + 2,
m_extrusionLine.Length - 2 * offset, true, false, false);
ShowRebar3d(bars);
}
/// <summary>
/// Create the CorbelFrame object with the given trapezoid face, corbel and its host information.
/// </summary>
/// <param name="corbel">Corbel instance</param>
/// <param name="depthEdge">Depth Edge which is vertical with trapezoid face</param>
/// <param name="leftEdge">Left edge of trapezoid</param>
/// <param name="bottomEdge">Bottom edge of trapezoid</param>
/// <param name="rightEdge">Right edge of trapezoid</param>
/// <param name="topEdge">Top edge of trapezoid</param>
/// <param name="revitDoc">Revit Document</param>
/// <param name="trapezoidFace">Trapezoid Face</param>
/// <param name="hostDepth">Corbel Host depth</param>
/// <param name="hostTopCoverDistance">Corbel Host Top face cover distance</param>
/// <returns>CorbelFrame object</returns>
private static CorbelFrame ConstructCorbelFrame(
FamilyInstance corbel,
Edge depthEdge, Edge leftEdge, Edge bottomEdge, Edge rightEdge, Edge topEdge,
Document revitDoc, PlanarFace trapezoidFace,
double hostDepth, double hostTopCoverDistance)
{
XYZ leftEdgeDir = (leftEdge.Evaluate(1.0) - leftEdge.Evaluate(0.0)).Normalize();
XYZ leftEdgeV0 = leftEdge.Evaluate(0.0);
Line leftEdgeLine = Line.get_Unbound(leftEdgeV0, leftEdgeDir);
XYZ rightEdgeDir = (rightEdge.Evaluate(1.0) - rightEdge.Evaluate(0.0)).Normalize();
XYZ rightEdgeV0 = rightEdge.Evaluate(0.0);
Line rightEdgeLine = Line.get_Unbound(rightEdgeV0, rightEdgeDir);
XYZ topEdgeDir = (topEdge.Evaluate(1.0) - topEdge.Evaluate(0.0)).Normalize();
XYZ topEdgeV0 = topEdge.Evaluate(0.0);
Line topEdgeLine = Line.get_Unbound(topEdgeV0, topEdgeDir);
IntersectionResultArray intersections;
topEdgeLine.Intersect(leftEdgeLine, out intersections);
XYZ prevX = intersections.get_Item(0).XYZPoint;
topEdgeLine.Intersect(rightEdgeLine, out intersections);
XYZ nextX = intersections.get_Item(0).XYZPoint;
XYZ edgeV0 = GetCommonVertex(bottomEdge, leftEdge);
XYZ edgeV1 = GetCommonVertex(bottomEdge, rightEdge);
Line topBoundLine = Line.get_Bound(nextX, prevX);
Line leftBoundLine = Line.get_Bound(prevX, edgeV0);
Line bottomBoundLine = Line.get_Bound(edgeV0, edgeV1);
Line rightBoundLine = Line.get_Bound(edgeV1, nextX);
Trapezoid profile = new Trapezoid(topBoundLine, leftBoundLine, bottomBoundLine, rightBoundLine);
XYZ depthEdgeV0 = depthEdge.Evaluate(0.0);
XYZ depthEdgeV1 = depthEdge.Evaluate(1.0);
Line depthLine = null;
if (depthEdgeV0.IsAlmostEqualTo(edgeV0))
{
depthLine = Line.get_Bound(depthEdgeV0, depthEdgeV1);
}
else if (depthEdgeV1.IsAlmostEqualTo(edgeV0))
{
depthLine = Line.get_Bound(depthEdgeV1, depthEdgeV0);
}
CorbelFrame frame = new CorbelFrame(corbel, profile, depthLine, hostDepth, hostTopCoverDistance);
return frame;
}