コード例 #1
0
        public void WriteToFile(BinaryWriter writer)
        {
            writer.Write(magic);
            writer.Write(splineCount);
            writer.Write(splineCount);
            writer.WriteInt24(splineOffset);
            writer.Write(splinePropertiesCount);
            writer.Write(splinePropertiesCount);
            writer.WriteInt24(splinePropertiesOffset);
            writer.Write(junctionPropertiesCount);
            writer.Write(junctionPropertiesCount);
            writer.WriteInt24(junctionPropertiesOffset);
            writer.Write(unkDataSet3Count);
            writer.Write(unkDataSet3Count);
            writer.WriteInt24(unkDataSet3Offset);
            writer.Write(unkDataSet4Count);
            writer.Write(unkDataSet4Count);
            writer.WriteInt24(unkDataSet4Offset);
            writer.Write(unkGPSSize);
            writer.Write(unkGPSSize);
            writer.WriteInt24(unkDataSet5Offset);
            writer.Write(unkDataSet6Count);
            writer.Write(unkDataSet6Count);
            writer.Write((int)unkDataSet3Count);

            long[] positions = new long[splineCount];
            for (int i = 0; i < splineCount; i++)
            {
                SplineDefinition data = splines[i];
                positions[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.offset);
                writer.Write(data.NumSplines1);
                writer.Write(data.NumSplines2);
                writer.Write(data.roadLength);
            }

            for (int i = 0; i < splineCount; i++)
            {
                long position = writer.BaseStream.Position;
                writer.BaseStream.Seek(positions[i], SeekOrigin.Begin);
                writer.WriteInt24((uint)position + 4);
                writer.BaseStream.Seek(position, SeekOrigin.Begin);
                SplineDefinition splineData = splines[i];
                for (int y = 0; y != splineData.points.Length; y++)
                {
                    Vector3Extenders.WriteToFile(splineData.points[y], writer);
                }
            }

            WriteUpdatedOffset(writer, 8);
            positions = new long[splineData.Length];   //lane offset
            long[] pos2 = new long[splineData.Length]; //range offset

            for (int i = 0; i != splineData.Length; i++)
            {
                SplineProperties data = splineData[i];
                writer.Write(data.LaneIDX0);
                writer.Write(data.LaneIDX1);
                positions[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.Offset0);
                writer.Write(data.LaneSize0);
                writer.Write(data.LaneSize1);
                pos2[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.Offset1);
                writer.Write(data.RangeSize0);
                writer.Write(data.RangeSize1);
                writer.Write((short)data.Flags);
                writer.Write(data.SplineIDX);
            }

            long[] pos3;

            for (int i = 0; i < splineData.Length; i++)
            {
                SplineProperties data = splineData[i];
                //update lane position
                long curPosition = writer.BaseStream.Position;
                writer.BaseStream.Seek(positions[i], SeekOrigin.Begin);
                writer.WriteInt24((uint)curPosition + 4);
                writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                //finished
                //also do rangeoffset
                pos3 = new long[data.LaneSize0];

                for (int y = 0; y < data.LaneSize1; y++)
                {
                    LaneProperties sect = splineData[i].Lanes[y];
                    writer.Write(sect.Width);
                    writer.Write((ushort)sect.Flags);
                    writer.Write(sect.Unk03);
                    //writer.Write((ushort)0);
                    pos3[y] = writer.BaseStream.Position;
                    writer.WriteInt24(sect.RangeOffset);
                    writer.Write(sect.RangeSize0);
                    writer.Write(sect.RangeSize1);
                }

                for (int y = 0; y < data.LaneSize0; y++)
                {
                    ////update range for this lane
                    curPosition = writer.BaseStream.Position;
                    uint rangeOffset = (uint)(data.Lanes[y].RangeSize0 > 0 ? curPosition + 4 : 0);
                    writer.BaseStream.Seek(pos3[y], SeekOrigin.Begin);
                    writer.WriteInt24(rangeOffset);
                    writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                    //finished

                    for (int x = 0; x < data.Lanes[y].RangeSize0; x++)
                    {
                        RangeProperties sect = data.Lanes[y].Ranges[x];
                        writer.Write(sect.Unk01);
                        writer.Write(sect.Unk02);
                        writer.Write(sect.Unk03);
                        writer.Write(sect.Unk04);
                        writer.Write(sect.Unk05);
                    }
                }

                //update range position
                curPosition = writer.BaseStream.Position;
                uint laneOffset = (uint)(data.RangeSize0 > 0 ? curPosition + 4 : 0);
                writer.BaseStream.Seek(pos2[i], SeekOrigin.Begin);
                writer.WriteInt24(laneOffset);
                writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                //finished

                for (int y = 0; y < data.RangeSize0; y++)
                {
                    RangeProperties sect = data.Ranges[y];
                    writer.Write(sect.Unk01);
                    writer.Write(sect.Unk02);
                    writer.Write(sect.Unk03);
                    writer.Write(sect.Unk04);
                    writer.Write(sect.Unk05);
                }
            }

            WriteUpdatedOffset(writer, 16);

            positions = new long[junctionPropertiesCount];
            pos2      = new long[junctionPropertiesCount];
            pos3      = new long[junctionPropertiesCount];
            for (int i = 0; i < junctionPropertiesCount; i++)
            {
                JunctionDefinition data = junctionData[i];
                Vector3Extenders.WriteToFile(data.Position, writer);
                positions[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.offset0);
                writer.Write(data.junctionSize0);
                writer.Write(data.junctionSize1);
                pos2[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.offset1);
                writer.Write(data.boundarySize0);
                writer.Write(data.boundarySize1);
                writer.Write(data.JunctionIDX);
                pos3[i] = writer.BaseStream.Position;
                writer.WriteInt24(data.offset2);
                writer.Write(data.Unk5);
                writer.Write(data.Unk6);
            }

            for (int i = 0; i < junctionPropertiesCount; i++)
            {
                //update junction position
                long curPosition    = writer.BaseStream.Position;
                uint junctionOffset = (uint)(junctionData[i].junctionSize0 > 0 ? curPosition + 4 : 0);
                writer.BaseStream.Seek(positions[i], SeekOrigin.Begin);
                writer.WriteInt24(junctionOffset);
                writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                //finished

                long[] junctionPos = new long[junctionData[i].junctionSize0];
                for (int y = 0; y < junctionData[i].junctionSize0; y++)
                {
                    JunctionSpline data4Sect = junctionData[i].Splines[y];
                    writer.Write(data4Sect.Unk0);
                    writer.Write(data4Sect.Unk1);
                    writer.Write(data4Sect.Unk2);
                    writer.Write(data4Sect.Unk3);
                    writer.Write(data4Sect.Unk4);
                    writer.Write(data4Sect.Unk5);
                    junctionPos[y] = writer.BaseStream.Position;
                    writer.WriteInt24(data4Sect.offset0);
                    writer.Write(data4Sect.pathSize0);
                    writer.Write(data4Sect.pathSize1);
                    writer.Write(data4Sect.length);
                }
                for (int y = 0; y < junctionData[i].junctionSize0; y++)
                {
                    //update path vectors
                    curPosition = writer.BaseStream.Position;
                    uint pathOffset = (uint)(junctionData[i].Splines[y].pathSize0 > 0 ? curPosition + 4 : 0);
                    writer.BaseStream.Seek(junctionPos[y], SeekOrigin.Begin);
                    writer.WriteInt24(pathOffset);
                    writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                    //finished

                    for (int z = 0; z != junctionData[i].Splines[y].pathSize1; z++)
                    {
                        Vector3Extenders.WriteToFile(junctionData[i].Splines[y].Path[z], writer);
                    }
                }

                //update boundary position
                curPosition = writer.BaseStream.Position;
                uint boundaryOffset = (uint)(junctionData[i].boundarySize0 > 0 ? curPosition + 4 : 0);
                writer.BaseStream.Seek(pos2[i], SeekOrigin.Begin);
                writer.WriteInt24(boundaryOffset);
                writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                //finished

                for (int y = 0; y < junctionData[i].boundarySize0; y++)
                {
                    Vector3Extenders.WriteToFile(junctionData[i].Boundaries[y], writer);
                }

                //update unk position
                curPosition = writer.BaseStream.Position;
                uint unkOffset = (uint)(junctionData[i].Unk5 > 0 ? curPosition + 4 : 0);
                writer.BaseStream.Seek(pos3[i], SeekOrigin.Begin);
                writer.WriteInt24(unkOffset);
                writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                //finished

                if (junctionData[i].Unk5 >= 2)
                {
                    long offsetPos  = 0;
                    long offset2Pos = 0;

                    unkStruct2Sect2 data = junctionData[i].DataSet2;

                    writer.Write(data.Unk0);
                    offsetPos = writer.BaseStream.Position;
                    writer.WriteInt24(data.offset0);
                    writer.Write(data.Unk1);
                    writer.Write(data.Unk2);
                    writer.Write(data.Unk3);
                    offset2Pos = writer.BaseStream.Position;
                    writer.WriteInt24(data.offset1);
                    writer.Write(data.Unk4);
                    writer.Write(data.Unk5);
                    writer.Write(data.Unk6);
                    writer.Write(data.Unk7);
                    writer.Write(data.Unk8);
                    writer.Write(data.Unk9);

                    if (junctionData[i].DataSet2.offset1 - junctionData[i].DataSet2.offset0 == 4)
                    {
                        Console.WriteLine("STOP");
                    }
                    else if (junctionData[i].DataSet2.offset1 - junctionData[i].DataSet2.offset0 == 8)
                    {
                        Console.WriteLine("STOP");
                    }
                    else
                    {
                        Console.WriteLine("STOP!");
                    }

                    //update offset0 position
                    curPosition = writer.BaseStream.Position;
                    writer.BaseStream.Seek(offsetPos, SeekOrigin.Begin);
                    writer.WriteInt24((uint)(curPosition - 4));
                    writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                    //finished
                    //update offset1 position
                    curPosition = writer.BaseStream.Position;
                    writer.BaseStream.Seek(offset2Pos, SeekOrigin.Begin);
                    writer.WriteInt24((uint)(data.Unk1 > 2 ? (curPosition - 4) + (2 * (junctionData[i].DataSet2.Unk1)): curPosition));
                    writer.BaseStream.Seek(curPosition, SeekOrigin.Begin);
                    //finished
                    if (data.Unk1 > 2 && data.Unk2 > 2)
                    {
                        if (junctionData[i].DataSet2.Unk1 == 4)
                        {
                            writer.Write(junctionData[i].DataSet2.Unk10[0]);
                            writer.Write(junctionData[i].DataSet2.Unk10[1]);
                        }
                        else
                        {
                            writer.Write(junctionData[i].DataSet2.Unk10[0]);
                            writer.Write(junctionData[i].DataSet2.Unk10[1]);
                            writer.Write(junctionData[i].DataSet2.Unk10[2]);
                            writer.Write(junctionData[i].DataSet2.Unk10[3]);
                        }
                    }

                    if (junctionData[i].Unk5 == 3)
                    {
                        writer.Write(data.Unk3Bytes);
                    }
                }
            }

            WriteUpdatedOffset(writer, 24);

            //related to junctions.
            for (int i = 0; i < unkDataSet3Count; i++)
            {
                writer.Write(unkSet3[i]); //stops junctions working.
            }
            WriteUpdatedOffset(writer, 32);

            for (int i = 0; i < unkDataSet4Count; i++)
            {
                writer.Write(unkSet4[i].Unk0); //stops cars spawning
                writer.Write(unkSet4[i].Unk1); //makes certain areas of the roadmap crash
            }

            WriteUpdatedOffset(writer, 40);

            for (int i = 0; i < unkGPSSize; i++)
            {
                writer.Write(unkGPS[i]); //traffic works, but no GPS data is available.
            }
            WriteUpdatedOffset(writer, 48);

            for (int i = 0; i < unkDataSet6Count; i++)
            {
                writer.Write(unkSet6[i]); //causes crashes, junctions fail to work.
            }
        }
コード例 #2
0
        public void ReadFromFile(BinaryReader reader)
        {
            magic       = reader.ReadInt32();
            splineCount = reader.ReadUInt16();
            short splineCount2 = reader.ReadInt16();

            splineOffset = reader.ReadInt24();
            reader.ReadByte();
            splinePropertiesCount = reader.ReadUInt16();
            short splinePropertiesCount2 = reader.ReadInt16();

            splinePropertiesOffset = reader.ReadInt24();
            reader.ReadByte();
            junctionPropertiesCount = reader.ReadUInt16();
            short junctionPropertiesCount2 = reader.ReadInt16();

            junctionPropertiesOffset = reader.ReadInt24();
            reader.ReadByte();
            unkDataSet3Count = reader.ReadUInt16();
            short unkDataSet3Count2 = reader.ReadInt16();

            unkDataSet3Offset = reader.ReadInt24();
            reader.ReadByte();
            unkDataSet4Count = reader.ReadUInt16();
            short unkDataSet4Count2 = reader.ReadInt16();

            unkDataSet4Offset = reader.ReadInt24();
            reader.ReadByte();
            unkGPSSize = reader.ReadUInt16();
            short unkDataSet5Count2 = reader.ReadInt16();

            unkDataSet5Offset = reader.ReadInt24();
            reader.ReadByte();
            unkDataSet6Count = reader.ReadUInt16();
            short unkDataSet6Count2 = reader.ReadInt16();

            int count1 = reader.ReadInt32();

            splines = new SplineDefinition[splineCount];

            for (int i = 0; i != splineCount; i++)
            {
                SplineDefinition data = new SplineDefinition();
                data.offset      = reader.ReadInt24();
                data.unk0        = reader.ReadByte();
                data.NumSplines1 = reader.ReadInt16();
                data.NumSplines2 = reader.ReadInt16();
                data.roadLength  = reader.ReadSingle();
                splines[i]       = data;
            }

            for (int i = 0; i != splineCount; i++)
            {
                SplineDefinition data = splines[i];
                data.points = new Vector3[splines[i].NumSplines1];
                reader.BaseStream.Position = splines[i].offset - 4;

                for (int y = 0; y != splines[i].NumSplines1; y++)
                {
                    data.points[y] = Vector3Extenders.ReadFromFile(reader);
                }

                splines[i] = data;
            }

            splineData = new SplineProperties[splinePropertiesCount];
            for (int i = 0; i != splineData.Length; i++)
            {
                SplineProperties data = new SplineProperties();
                data.LaneIDX0 = reader.ReadUInt16();
                data.LaneIDX1 = reader.ReadUInt16();
                data.Offset0  = reader.ReadInt24();
                reader.ReadByte();
                data.LaneSize0 = reader.ReadUInt16();
                data.LaneSize1 = reader.ReadUInt16();
                data.Offset1   = reader.ReadInt24();
                reader.ReadByte();
                data.RangeSize0 = reader.ReadUInt16();
                data.RangeSize1 = reader.ReadUInt16();
                data.Flags      = (RoadFlags)reader.ReadInt16();
                data.SplineIDX  = reader.ReadUInt16();
                splineData[i]   = data;
            }

            for (int i = 0; i != splinePropertiesCount; i++)
            {
                SplineProperties data = splineData[i];
                data.Lanes = new LaneProperties[data.LaneSize1];

                for (int y = 0; y != data.LaneSize1; y++)
                {
                    LaneProperties sect = new LaneProperties();
                    sect.Width       = reader.ReadSingle();
                    sect.Flags       = (LaneTypes)reader.ReadUInt16();
                    sect.Unk03       = reader.ReadUInt16();
                    sect.RangeOffset = reader.ReadInt24();
                    reader.ReadByte();
                    sect.RangeSize0 = reader.ReadUInt16();
                    sect.RangeSize1 = reader.ReadUInt16();

                    data.Lanes[y] = sect;
                }

                for (int y = 0; y != data.LaneSize1; y++)
                {
                    if (data.Lanes[y].RangeSize0 > 0)
                    {
                        data.Lanes[y].Ranges = new RangeProperties[data.Lanes[y].RangeSize0];
                    }

                    for (int x = 0; x != data.Lanes[y].RangeSize0; x++)
                    {
                        RangeProperties sect = new RangeProperties();
                        sect.Unk01 = reader.ReadSingle();
                        sect.Unk02 = reader.ReadSingle();
                        sect.Unk03 = reader.ReadInt16();
                        sect.Unk04 = reader.ReadInt16();
                        sect.Unk05 = reader.ReadSingle();
                        data.Lanes[y].Ranges[x] = sect;
                    }
                }

                data.Ranges = new RangeProperties[data.RangeSize0];

                for (int y = 0; y != data.RangeSize0; y++)
                {
                    RangeProperties sect = new RangeProperties();
                    sect.Unk01     = reader.ReadSingle();
                    sect.Unk02     = reader.ReadSingle();
                    sect.Unk03     = reader.ReadInt16();
                    sect.Unk04     = reader.ReadInt16();
                    sect.Unk05     = reader.ReadSingle();
                    data.Ranges[y] = sect;
                }

                splineData[i] = data;

                if (data.SplineIDX > 4096 && data.SplineIDX < 4128)
                {
                    splines[data.SplineIDX - 4096].SetSplineData(data, 4096);
                }
                else if (data.SplineIDX > 24576 && data.SplineIDX < 25332)
                {
                    splines[data.SplineIDX - 24576].SetSplineData(data, 24576);
                }
                else if (data.SplineIDX > 16384 && data.SplineIDX < 16900)
                {
                    splines[data.SplineIDX - 16384].SetSplineData(data, 16384);
                }
                else if (data.SplineIDX > 32768 && data.SplineIDX < 36864)
                {
                    splines[data.SplineIDX - 32768].SetSplineData(data, 32768);
                }
                else if (data.SplineIDX > 36864)
                {
                    splines[data.SplineIDX - 36864].SetSplineData(data, 36864);
                }
                else
                {
                    splines[data.SplineIDX].SetSplineData(data, 0);
                }
            }

            junctionData = new JunctionDefinition[junctionPropertiesCount];
            for (int i = 0; i != junctionPropertiesCount; i++)
            {
                JunctionDefinition data = new JunctionDefinition();
                data.Position = Vector3Extenders.ReadFromFile(reader);
                data.offset0  = reader.ReadInt24();
                reader.ReadByte();
                data.junctionSize0 = reader.ReadInt16();
                data.junctionSize1 = reader.ReadInt16();
                data.offset1       = reader.ReadInt24();
                reader.ReadByte();
                data.boundarySize0 = reader.ReadInt16();
                data.boundarySize1 = reader.ReadInt16();
                data.JunctionIDX   = reader.ReadInt32();
                data.offset2       = reader.ReadInt24();
                reader.ReadByte();
                data.Unk5       = reader.ReadInt16();
                data.Unk6       = reader.ReadInt16();
                junctionData[i] = data;
            }

            for (int i = 0; i != junctionPropertiesCount; i++)
            {
                junctionData[i].Splines = new JunctionSpline[junctionData[i].junctionSize0];

                for (int y = 0; y != junctionData[i].junctionSize0; y++)
                {
                    JunctionSpline data4Sect = new JunctionSpline();
                    data4Sect.Unk0    = reader.ReadInt16();
                    data4Sect.Unk1    = reader.ReadInt16();
                    data4Sect.Unk2    = reader.ReadInt16();
                    data4Sect.Unk3    = reader.ReadInt16();
                    data4Sect.Unk4    = reader.ReadInt16();
                    data4Sect.Unk5    = reader.ReadInt16();
                    data4Sect.offset0 = reader.ReadInt24();
                    reader.ReadByte();
                    data4Sect.pathSize0        = reader.ReadInt16();
                    data4Sect.pathSize1        = reader.ReadInt16();
                    data4Sect.length           = reader.ReadSingle();
                    junctionData[i].Splines[y] = data4Sect;
                }
                for (int y = 0; y != junctionData[i].junctionSize0; y++)
                {
                    junctionData[i].Splines[y].Path = new Vector3[junctionData[i].Splines[y].pathSize0];

                    for (int z = 0; z != junctionData[i].Splines[y].pathSize1; z++)
                    {
                        junctionData[i].Splines[y].Path[z] = Vector3Extenders.ReadFromFile(reader);
                    }
                }

                junctionData[i].Boundaries = new Vector3[junctionData[i].boundarySize0];
                for (int y = 0; y != junctionData[i].boundarySize0; y++)
                {
                    junctionData[i].Boundaries[y] = Vector3Extenders.ReadFromFile(reader);
                }

                if (junctionData[i].Unk5 >= 2)
                {
                    unkStruct2Sect2 dataSet = new unkStruct2Sect2();
                    dataSet         = new unkStruct2Sect2();
                    dataSet.Unk0    = reader.ReadInt32();
                    dataSet.offset0 = reader.ReadInt24();
                    reader.ReadByte();
                    dataSet.Unk1    = reader.ReadInt16();
                    dataSet.Unk2    = reader.ReadInt16();
                    dataSet.Unk3    = reader.ReadInt32();
                    dataSet.offset1 = reader.ReadInt24();
                    reader.ReadByte();
                    dataSet.Unk4 = reader.ReadInt16();
                    dataSet.Unk5 = reader.ReadInt16();
                    dataSet.Unk6 = reader.ReadInt16();
                    dataSet.Unk7 = reader.ReadInt16();
                    dataSet.Unk8 = reader.ReadInt16();
                    dataSet.Unk9 = reader.ReadInt16();

                    //this could actually be collection of ints.
                    dataSet.Unk10 = new ushort[8];

                    if (dataSet.Unk1 == 6 && dataSet.Unk2 == 6)
                    {
                        Console.WriteLine("STOP");
                    }

                    if (dataSet.Unk1 > 2 && dataSet.Unk2 > 2)
                    {
                        if (dataSet.Unk1 == 4)
                        {
                            dataSet.Unk10[0] = reader.ReadUInt16();
                            dataSet.Unk10[1] = reader.ReadUInt16();
                            dataSet.Unk10[2] = 0;
                            dataSet.Unk10[3] = 0;
                        }
                        else
                        {
                            dataSet.Unk10[0] = reader.ReadUInt16();
                            dataSet.Unk10[1] = reader.ReadUInt16();
                            dataSet.Unk10[2] = reader.ReadUInt16();
                            dataSet.Unk10[3] = reader.ReadUInt16();
                        }
                    }

                    if (junctionData[i].Unk5 == 3)
                    {
                        dataSet.Unk3Bytes = reader.ReadBytes(16);
                    }

                    junctionData[i].DataSet2 = dataSet;
                }
            }

            unkSet3 = new ushort[unkDataSet3Count];
            unkSet4 = new unkStruct3[unkDataSet4Count];
            unkGPS  = new ushort[unkGPSSize];
            unkSet6 = new ushort[unkDataSet6Count];

            for (int i = 0; i < unkDataSet3Count; i++)
            {
                unkSet3[i] = reader.ReadUInt16();
            }

            for (int i = 0; i < unkDataSet4Count; i++)
            {
                unkSet4[i]      = new unkStruct3();
                unkSet4[i].Unk0 = reader.ReadUInt16();
                unkSet4[i].Unk1 = reader.ReadUInt16();
            }

            for (int i = 0; i < unkGPSSize; i++)
            {
                unkGPS[i] = reader.ReadUInt16();
            }

            for (int i = 0; i < unkDataSet6Count; i++)
            {
                unkSet6[i] = reader.ReadUInt16();
            }

            int highest = -1;

            for (int i = 0; i < unkDataSet3Count; i++)
            {
                if (unkSet3[i] > highest)
                {
                    highest = unkSet3[i];
                }
            }

            int highestp1 = -1;
            int highestp2 = -1;
            int idxp2     = -1;

            int high5 = -1;
            int high6 = -1;

            for (int i = 0; i < unkDataSet4Count; i++)
            {
                if (unkSet4[i].Unk0 > highestp1)
                {
                    highestp1 = unkSet4[i].Unk0;
                }

                if (unkSet4[i].Unk1 > highestp2)
                {
                    highestp2 = unkSet4[i].Unk1;
                    idxp2     = i;
                }
            }

            for (int i = 0; i < unkGPS.Length; i++)
            {
                if (unkGPS[i] > high5)
                {
                    high5 = unkGPS[i];
                }
            }

            for (int i = 0; i < unkSet6.Length; i++)
            {
                if (unkSet6[i] > high6)
                {
                    high6 = unkSet6[i];
                }
            }
        }