コード例 #1
0
        public SecondDerivativeOp(int direction, FdmMesher mesher)
            : base(direction, mesher)
        {
            FdmLinearOpLayout   layout  = mesher.layout();
            FdmLinearOpIterator endIter = layout.end();

            for (FdmLinearOpIterator iter = layout.begin(); iter != endIter; ++iter)
            {
                int    i  = iter.index();
                double?hm = mesher.dminus(iter, direction_);
                double?hp = mesher.dplus(iter, direction_);

                double?zetam1 = hm * (hm + hp);
                double?zeta0  = hm * hp;
                double?zetap1 = hp * (hm + hp);

                int co = iter.coordinates()[direction_];
                if (co == 0 || co == layout.dim()[direction] - 1)
                {
                    lower_[i] = diag_[i] = upper_[i] = 0.0;
                }
                else
                {
                    lower_[i] = 2.0 / zetam1.Value;
                    diag_[i]  = -2.0 / zeta0.Value;
                    upper_[i] = 2.0 / zetap1.Value;
                }
            }
        }
コード例 #2
0
ファイル: FirstDerivativeOp.cs プロジェクト: zhangz/QLNet
        public FirstDerivativeOp(int direction, FdmMesher mesher)
            : base(direction, mesher)
        {
            FdmLinearOpLayout   layout  = mesher.layout();
            FdmLinearOpIterator endIter = layout.end();

            for (FdmLinearOpIterator iter = layout.begin(); iter != endIter; ++iter)
            {
                int    i  = iter.index();
                double?hm = mesher.dminus(iter, direction_);
                double?hp = mesher.dplus(iter, direction_);

                double?zetam1 = hm * (hm + hp);
                double?zeta0  = hm * hp;
                double?zetap1 = hp * (hm + hp);

                if (iter.coordinates()[direction_] == 0)
                {
                    //upwinding scheme
                    lower_[i] = 0.0;
                    diag_[i]  = -(upper_[i] = 1 / hp.Value);
                }
                else if (iter.coordinates()[direction_]
                         == layout.dim()[direction] - 1)
                {
                    // downwinding scheme
                    lower_[i] = -(diag_[i] = 1 / hm.Value);
                    upper_[i] = 0.0;
                }
                else
                {
                    lower_[i] = -hp.Value / zetam1.Value;
                    diag_[i]  = (hp.Value - hm.Value) / zeta0.Value;
                    upper_[i] = hm.Value / zetap1.Value;
                }
            }
        }
コード例 #3
0
        public SecondOrderMixedDerivativeOp(int d0, int d1, FdmMesher mesher)
            : base(d0, d1, mesher)
        {
            FdmLinearOpLayout   layout  = mesher.layout();
            FdmLinearOpIterator endIter = layout.end();

            for (FdmLinearOpIterator iter = layout.begin(); iter != endIter; ++iter)
            {
                int    i     = iter.index();
                double?hm_d0 = mesher.dminus(iter, d0_);
                double?hp_d0 = mesher.dplus(iter, d0_);
                double?hm_d1 = mesher.dminus(iter, d1_);
                double?hp_d1 = mesher.dplus(iter, d1_);

                double?zetam1 = hm_d0 * (hm_d0 + hp_d0);
                double?zeta0  = hm_d0 * hp_d0;
                double?zetap1 = hp_d0 * (hm_d0 + hp_d0);
                double?phim1  = hm_d1 * (hm_d1 + hp_d1);
                double?phi0   = hm_d1 * hp_d1;
                double?phip1  = hp_d1 * (hm_d1 + hp_d1);

                int c0 = iter.coordinates()[d0_];
                int c1 = iter.coordinates()[d1_];
                if (c0 == 0 && c1 == 0)
                {
                    // lower left corner
                    a00_[i] = a01_[i] = a02_[i] = a10_[i] = a20_[i] = 0.0;
                    a11_[i] = a22_[i] = 1.0 / (hp_d0.Value * hp_d1.Value);
                    a21_[i] = a12_[i] = -a11_[i];
                }
                else if (c0 == layout.dim()[d0_] - 1 && c1 == 0)
                {
                    // upper left corner
                    a22_[i] = a21_[i] = a20_[i] = a10_[i] = a00_[i] = 0.0;
                    a01_[i] = a12_[i] = 1.0 / (hm_d0.Value * hp_d1.Value);
                    a11_[i] = a02_[i] = -a01_[i];
                }
                else if (c0 == 0 && c1 == layout.dim()[d1_] - 1)
                {
                    // lower right corner
                    a00_[i] = a01_[i] = a02_[i] = a12_[i] = a22_[i] = 0.0;
                    a10_[i] = a21_[i] = 1.0 / (hp_d0.Value * hm_d1.Value);
                    a20_[i] = a11_[i] = -a10_[i];
                }
                else if (c0 == layout.dim()[d0_] - 1 && c1 == layout.dim()[d1_] - 1)
                {
                    // upper right corner
                    a20_[i] = a21_[i] = a22_[i] = a12_[i] = a02_[i] = 0.0;
                    a00_[i] = a11_[i] = 1.0 / (hm_d0.Value * hm_d1.Value);
                    a10_[i] = a01_[i] = -a00_[i];
                }
                else if (c0 == 0)
                {
                    // lower side
                    a00_[i] = a01_[i] = a02_[i] = 0.0;
                    a10_[i] = hp_d1.Value / (hp_d0.Value * phim1.Value);
                    a20_[i] = -a10_[i];
                    a21_[i] = (hp_d1.Value - hm_d1.Value) / (hp_d0.Value * phi0.Value);
                    a11_[i] = -a21_[i];
                    a22_[i] = hm_d1.Value / (hp_d0.Value * phip1.Value);
                    a12_[i] = -a22_[i];
                }
                else if (c0 == layout.dim()[d0_] - 1)
                {
                    // upper side
                    a20_[i] = a21_[i] = a22_[i] = 0.0;
                    a00_[i] = hp_d1.Value / (hm_d0.Value * phim1.Value);
                    a10_[i] = -a00_[i];
                    a11_[i] = (hp_d1.Value - hm_d1.Value) / (hm_d0.Value * phi0.Value);
                    a01_[i] = -a11_[i];
                    a12_[i] = hm_d1.Value / (hm_d0.Value * phip1.Value);
                    a02_[i] = -a12_[i];
                }
                else if (c1 == 0)
                {
                    // left side
                    a00_[i] = a10_[i] = a20_[i] = 0.0;
                    a01_[i] = hp_d0.Value / (zetam1.Value * hp_d1.Value);
                    a02_[i] = -a01_[i];
                    a12_[i] = (hp_d0.Value - hm_d0.Value) / (zeta0.Value * hp_d1.Value);
                    a11_[i] = -a12_[i];
                    a22_[i] = hm_d0.Value / (zetap1.Value * hp_d1.Value);
                    a21_[i] = -a22_[i];
                }
                else if (c1 == layout.dim()[d1_] - 1)
                {
                    // right side
                    a22_[i] = a12_[i] = a02_[i] = 0.0;
                    a00_[i] = hp_d0.Value / (zetam1.Value * hm_d1.Value);
                    a01_[i] = -a00_[i];
                    a11_[i] = (hp_d0.Value - hm_d0.Value) / (zeta0.Value * hm_d1.Value);
                    a10_[i] = -a11_[i];
                    a21_[i] = hm_d0.Value / (zetap1.Value * hm_d1.Value);
                    a20_[i] = -a21_[i];
                }
                else
                {
                    a00_[i] = hp_d0.Value * hp_d1.Value / (zetam1.Value * phim1.Value);
                    a10_[i] = -(hp_d0.Value - hm_d0.Value) * hp_d1.Value / (zeta0.Value * phim1.Value);
                    a20_[i] = -hm_d0.Value * hp_d1.Value / (zetap1.Value * phim1.Value);
                    a01_[i] = -hp_d0.Value * (hp_d1.Value - hm_d1.Value) / (zetam1.Value * phi0.Value);
                    a11_[i] = (hp_d0.Value - hm_d0.Value) * (hp_d1.Value - hm_d1.Value) / (zeta0.Value * phi0.Value);
                    a21_[i] = hm_d0.Value * (hp_d1.Value - hm_d1.Value) / (zetap1.Value * phi0.Value);
                    a02_[i] = -hp_d0.Value * hm_d1.Value / (zetam1.Value * phip1.Value);
                    a12_[i] = hm_d1.Value * (hp_d0.Value - hm_d0.Value) / (zeta0.Value * phip1.Value);
                    a22_[i] = hm_d0.Value * hm_d1.Value / (zetap1.Value * phip1.Value);
                }
            }
        }