//<param name="mode">The initialization mode.</param>
internal override void Initialize(InitializationModes mode)
{
//Split gear ratios & fade in/ out ranges into an array
InternalFunctions.ParseStringToIntArray(gearratios, ref geararray, "gearratios");
InternalFunctions.ParseStringToIntArray(gearfadeinrange, ref gearfadeinarray, "gearfadeinrange");
InternalFunctions.ParseStringToIntArray(gearfadeoutrange, ref gearfadeoutarray, "gearfadeoutrange");
//Test if we have any gears
if (geararray.Length == 1 && geararray[0] == 0)
{
nogears = true;
totalgears = 0;
}
//If we have gears ensure that we're set in gear 0
//Also set value for total number of gears for easy access
else
{
CurrentGear = 0;
totalgears = geararray.Length + 1;
}
//Set previous revs to zero
previousrevs = 0;
//Parse heating rates into an array
InternalFunctions.ParseStringToIntArray(heatingrate, ref heatingarray, "heatingrate");
//Set temperature to zero
this.temperature = 0;
//Parse fuel consumption into an array
InternalFunctions.ParseStringToIntArray(fuelconsumption, ref fuelarray, "fuelconsumption");
fuel = (int)fuelstartamount;
}
//<param name="mode">The initialization mode.</param>
internal override void Initialize(InitializationModes mode)
{
//Set Starting Paramaters Here
//Timers to zero
deadmanstimer = 0.0;
//Split vigilance times into an array
try
{
string[] splitvigilancetimes = vigilancetimes.Split(',');
vigilancearray = new int[splitvigilancetimes.Length];
for (int i = 0; i < vigilancearray.Length; i++)
{
vigilancearray[i] = Int32.Parse(splitvigilancetimes[i], NumberStyles.Number, CultureInfo.InvariantCulture);
}
}
catch
{
InternalFunctions.LogError("vigilancetimes", 0);
}
//
if (DRAEnabled == false || DRAStartState == -1)
{
Train.drastate = false;
}
else
{
Train.drastate = true;
Train.TractionManager.DemandPowerCutoff("Power cutoff was demanded by the DRA");
}
DeadmansHandleState = DeadmanStates.None;
}
/// <summary>Parses a comma separated string to an array of doubles</summary>
/// <param name="InputString">The input string.</param>
/// <param name="OutputArray">The array to output to.</param>
/// <param name="FailingValue">The error string to pass to the debug logger if this fails.</param>
public static void ParseStringToDoubleArray(string InputString, ref double[] OutputArray, string FailingValue)
{
try
{
string[] splitheatingrate = InputString.Split(',');
OutputArray = new double[splitheatingrate.Length];
for (int i = 0; i < OutputArray.Length; i++)
{
OutputArray[i] = Double.Parse(splitheatingrate[i], NumberStyles.Number, CultureInfo.InvariantCulture);
}
}
catch
{
InternalFunctions.LogError("An error occured whilst attempting to parse " + FailingValue, 6);
}
}
//<param name="mode">The initialization mode.</param>
internal override void Initialize(InitializationModes mode)
{
stm_reverser = 0;
stm_power = 0;
cutoff = 30;
cutoffstate = 0;
stm_boilerpressure = (int)boilermaxpressure;
if (boilerstartwaterlevel == -1)
{
stm_boilerwater = (int)boilermaxwaterlevel;
}
else
{
stm_boilerwater = (int)boilerstartwaterlevel;
}
fuel = (int)fuelstartamount;
this.cutofftimer = 0.0;
this.maintimer = 0.0;
InternalFunctions.ParseStringToIntArray(heatingrate, ref heatingarray, "heatingrate");
//Calculate the water to steam rate and store it here, don't call every frame
calculatedsteamrate = (int)boilerwatertosteamrate / 60;
//Set the starting fire mass
if (firestartmass == -1)
{
firemass = (int)maximumfiremass;
}
else
{
firemass = (int)firestartmass;
}
firetemp = (int)firestartemp;
LastPower = 0;
if (Blowoff.BlowoffTime != 0)
{
Blowoff.BlowoffRate = (Blowoff.TriggerPressure - boilermaxpressure) / Blowoff.BlowoffTime;
}
}
internal static string[] UpgradeConfigurationFile(string file, string trainpath)
{
var SCMT = new List <string>();
var vigilance = new List <string>();
var keys = new List <string>();
var errors = new List <string>();
string[] lines = File.ReadAllLines(file, Encoding.UTF8);
foreach (string t in lines)
{
string line = t;
int semicolon = line.IndexOf(';');
if (semicolon >= 0)
{
line = line.Substring(0, semicolon).Trim();
}
else
{
line = line.Trim();
}
//Trim extra commas from the end of strings
//Stops the parser from attempting to read in blank values and causing issues
line = line.TrimEnd(',');
int equals = line.IndexOf('=');
if (@equals >= 0)
{
string key = line.Substring(0, @equals).Trim().ToLowerInvariant();
string value = line.Substring(@equals + 1).Trim();
string keyassignment = "";
string failingvalue = "";
switch (key)
{
case "spiablu":
SCMT.Add(line);
break;
case "spiarossi":
SCMT.Add(line);
break;
case "spiascmt":
SCMT.Add(line);
break;
case "indsr":
SCMT.Add(line);
break;
case "traintrip":
SCMT.Add(line);
break;
case "testscmt":
SCMT.Add(line);
break;
case "testpulsanti":
SCMT.Add(line);
break;
case "suonoscmton":
SCMT.Add(line);
break;
case "suonoconfdati":
SCMT.Add(line);
break;
case "suonoinsscmt":
SCMT.Add(line);
break;
case "indlcm":
SCMT.Add(line);
break;
case "indimpvelpressed":
SCMT.Add(line);
break;
case "indimpvelpressedsu":
SCMT.Add(line);
break;
case "indimpvelpressedgiu":
SCMT.Add(line);
break;
case "suonoimpvel":
SCMT.Add(line);
break;
case "indabbanco":
SCMT.Add(line);
break;
case "suonoconsavv":
SCMT.Add(line);
break;
case "indconsavv":
SCMT.Add(line);
break;
case "indavv":
SCMT.Add(line);
break;
case "suonoavv":
SCMT.Add(line);
break;
case "indarr":
SCMT.Add(line);
break;
case "suonoarr":
SCMT.Add(line);
break;
case "indattesa":
SCMT.Add(line);
break;
case "indacarrfren":
SCMT.Add(line);
break;
case "accensionemot":
SCMT.Add(line);
break;
case "indcontgiri":
SCMT.Add(line);
break;
case "indgas":
SCMT.Add(line);
break;
case "inddinamometro":
SCMT.Add(line);
break;
case "indvoltbatt":
SCMT.Add(line);
break;
case "indspegnmon":
SCMT.Add(line);
break;
case "suonosottofondo":
SCMT.Add(line);
break;
case "tpwsstopdelay":
SCMT.Add(line);
break;
//Key Assignments
case "scmtkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "lcmupkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "lcmdownkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "abbancokey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "consavvkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "avvkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "spegnkey":
InternalFunctions.UpgradeKey(value, ref keyassignment, failingvalue);
keys.Add(key + "=" + keyassignment);
break;
case "impvel":
var splits = value.Split(',');
try
{
InternalFunctions.UpgradeKey(splits[0], ref keyassignment, failingvalue);
keys.Add("impvelsukey" + "=" + keyassignment);
InternalFunctions.UpgradeKey(splits[1], ref keyassignment, failingvalue);
keys.Add("impvelgiukey" + "=" + keyassignment);
}
catch (Exception)
{
errors.Add("The key assignment impvel contains invalid data");
}
break;
case "vigilante":
vigilance.Add(line);
break;
//VALUES TO BE ADDED TO VIGILANCE SECTION OF CONFIGURATION FILE
case "vigilance":
//Change vigilance to deadmanshandle (Internal)
vigilance.Add("deadmanshandle=" + value);
break;
case "overspeedcontrol":
vigilance.Add(line);
break;
case "warningspeed":
vigilance.Add(line);
break;
case "overspeed":
vigilance.Add(line);
break;
case "overspeedalarm":
vigilance.Add(line);
break;
case "safespeed":
vigilance.Add(line);
break;
case "overspeedindicator":
vigilance.Add(line);
break;
case "vigilanceinterval":
vigilance.Add(line);
break;
case "vigilanceautorelease":
vigilance.Add(line);
break;
case "vigilancecancellable":
vigilance.Add(line);
break;
case "vigilancelamp":
vigilance.Add(line);
break;
case "vigilancealarm":
vigilance.Add(line);
break;
case "independentvigilance":
vigilance.Add(line);
break;
case "vigilancedelay1":
vigilance.Add(line);
break;
case "vigilancedelay2":
vigilance.Add(line);
break;
case "vigilanceinactivespeed":
vigilance.Add(line);
break;
case "reminderkey":
vigilance.Add("draenabled=" + value);
break;
case "reminderindicator":
vigilance.Add("draindicator=" + value);
break;
default:
errors.Add(line);
break;
}
}
}
List <string> Lines = new List <string>();
/*Write out the generator version and warning
* Version 1 files handle OS_ATS only
* Version 2 files handle OS_SZ_ATS files
* TODO: Re-generate files if a version 1 file is detected with OS_SZ_ATS present
*/
Lines.Add(";GenVersion=2");
Lines.Add(";DELETE THE ABOVE LINE IF YOU MODIFY THIS FILE");
Lines.Add("");
if (SCMT.Count > 0)
{
Lines.Add("[SCMT]");
Lines.AddRange(SCMT);
}
if (vigilance.Count > 0)
{
Lines.Add("[Vigilance]");
Lines.AddRange(vigilance);
}
Lines.Add("[KeyAssignmentsLegacy]");
if (keys.Count > 0)
{
Lines.AddRange(keys);
}
using (StreamWriter sw = File.AppendText(Path.Combine(trainpath, "error.log")))
{
//Write out upgrade errors to log file
sw.WriteLine("The following unsupported paramaters were detected whilst attempting to upgrade the existing configuration file:");
foreach (string item in errors)
{
sw.WriteLine(item);
}
}
return(Lines.ToArray());
}
//This class will upgrade an existing OS_ATS configuration file.
//Only supported values will be upgradeed.
internal static string[] UpgradeConfigurationFile(string file, string trainpath)
{
var diesel = new List <string>();
var electric = new List <string>();
var steam = new List <string>();
var common = new List <string>();
var vigilance = new List <string>();
var AWS = new List <string>();
var TPWS = new List <string>();
var interlocks = new List <string>();
var windscreen = new List <string>();
var keys = new List <string>();
var errors = new List <string>();
int mySystem = 0;
bool steamtype = false;
bool dieseltype = false;
//Read all lines of existing OS_ATS configuration file and add to appropriate arrays
string[] lines = File.ReadAllLines(file, Encoding.UTF8);
foreach (string t in lines)
{
string parsedKey = "";
string line = t;
int semicolon = line.IndexOf(';');
if (semicolon >= 0)
{
line = line.Substring(0, semicolon).Trim();
}
else
{
line = line.Trim();
}
//Trim extra commas from the end of strings
//Stops the parser from attempting to read in blank values and causing issues
line = line.TrimEnd(',');
int equals = line.IndexOf('=');
if (@equals >= 0)
{
string key = line.Substring(0, @equals).Trim().ToLowerInvariant();
string value = line.Substring(@equals + 1).Trim();
switch (key)
{
case "traction":
//Set the traction type
if (Convert.ToInt32(value) == 1)
{
steamtype = true;
}
else if (Convert.ToInt32(value) == 2)
{
dieseltype = true;
}
break;
//VALUES COMMON TO ALL TRACTION TYPE SECTIONS
case "automatic":
common.Add(line);
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("automatickey=" + parsedKey);
break;
case "fuelindicator":
common.Add(line);
break;
case "fuelcapacity":
common.Add(line);
break;
case "fuelstartamount":
common.Add(line);
break;
case "fuelfillspeed":
common.Add(line);
break;
case "fuelfillindicator":
common.Add(line);
break;
case "automaticindicator":
common.Add(line);
break;
case "heatingpart":
common.Add(line);
break;
case "heatingrate":
common.Add(line);
break;
case "overheatwarn":
common.Add(line);
break;
case "overheat":
common.Add(line);
break;
case "overheatresult":
common.Add(line);
break;
case "thermometer":
common.Add(line);
break;
case "overheatindicator":
common.Add(line);
break;
case "overheatalarm":
common.Add(line);
break;
//VALUES TO BE ADDED TO THE DIESEL SECTION OF THE CONFIGURATION FILE
case "gearratios":
diesel.Add(line);
break;
case "gearfadeinrange":
diesel.Add(line);
break;
case "gearfadeoutrange":
diesel.Add(line);
break;
case "gearindicator":
diesel.Add(line);
break;
case "tachometer":
diesel.Add(line);
break;
case "fuelconsumption":
diesel.Add(line);
break;
case "gearloopsound":
diesel.Add(line);
break;
case "gearchangesound":
//Handle trains with an additional paramater on gearchange sound
string[] gearchangefix = line.Split(',');
diesel.Add(gearchangefix[0]);
break;
case "gearupkey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add(key + "=" + parsedKey);
break;
case "geardownkey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add(key + "=" + parsedKey);
break;
//VALUES TO BE ADDED TO THE STEAM SECTION OF THE CONFIGURATION FILE
case "cutoffmax":
steam.Add(line);
break;
case "cutoffmin":
steam.Add(line);
break;
case "cutoffineffective":
steam.Add(line);
break;
case "cutoffdecreasekey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("cutoffdownkey=" + parsedKey);
break;
case "cutoffincreasekey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("cutoffupkey=" + parsedKey);
break;
case "cutoffdeviation":
steam.Add(line);
break;
case "cutoffratio":
steam.Add(line);
break;
case "cutoffratiobase":
steam.Add(line);
break;
case "cutoffindicator":
steam.Add(line);
break;
case "injectorrate":
steam.Add(line);
break;
case "injectorindicator":
steam.Add(line);
break;
case "injectortogglekey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("injectorkey=" + parsedKey);
break;
case "boilermaxpressure":
steam.Add(line);
break;
case "boilerminpressure":
steam.Add(line);
break;
case "boilerpressureindicator":
steam.Add(line);
break;
case "boilerwaterlevelindicator":
steam.Add(line);
break;
case "boilermaxwaterlevel":
steam.Add(line);
break;
case "boilerwatertosteamrate":
steam.Add(line);
break;
//VALYES TO BE ADDED TO THE ELECTRIC SECTION OF THE CONFIGURATION FILE
case "powergapbehaviour":
electric.Add(line);
break;
case "powerpickuppoints":
electric.Add(line);
break;
case "powerindicator":
electric.Add(line);
break;
case "ammeter":
electric.Add(line);
break;
case "ammetervalues":
//Handle negative values in ammeter string
string ammeterfix = line.Replace("-", "");
electric.Add(ammeterfix);
break;
//VALUES TO BE ADDED TO VIGILANCE SECTION OF CONFIGURATION FILE
case "vigilance":
//Change vigilance to deadmanshandle (Internal)
vigilance.Add("deadmanshandle=" + value);
break;
case "vigilancekey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("safetykey=" + parsedKey);
break;
case "overspeedcontrol":
vigilance.Add(line);
break;
case "warningspeed":
vigilance.Add(line);
break;
case "overspeed":
vigilance.Add(line);
break;
case "overspeedalarm":
vigilance.Add(line);
break;
case "safespeed":
vigilance.Add(line);
break;
case "overspeedindicator":
vigilance.Add(line);
break;
case "vigilanceinterval":
vigilance.Add(line);
break;
case "vigilanceautorelease":
vigilance.Add(line);
break;
case "vigilancecancellable":
vigilance.Add(line);
break;
case "vigilancelamp":
vigilance.Add(line);
break;
case "vigilancealarm":
vigilance.Add(line);
break;
case "independentvigilance":
vigilance.Add(line);
break;
case "vigilancedelay1":
vigilance.Add(line);
break;
case "vigilancedelay2":
vigilance.Add(line);
break;
case "vigilanceinactivespeed":
vigilance.Add(line);
break;
case "reminderkey":
vigilance.Add("draenabled=" + value);
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add("drakey=" + parsedKey);
break;
case "reminderindicator":
vigilance.Add("draindicator=" + value);
break;
//VALUES TO BE ADDED TO AWS SECTION OF THE CONFIGURATION FILE
case "awsindicator":
AWS.Add(line);
break;
case "awswarningsound":
AWS.Add(line);
break;
case "awsclearsound":
AWS.Add(line);
break;
case "awsdelay":
AWS.Add(line);
break;
case "tpwswarningsound":
AWS.Add(line);
break;
//VALUES TO BE ADDED TO TPWS SECTION OF CONFIGURATION FILE
case "tpwsindicator":
TPWS.Add(line);
break;
case "tpwsindicator2":
TPWS.Add(line);
break;
//VALUES TO BE ADDED TO THE INTERLOCKS SECTION OF THE CONFIGURATION FILE
case "doorpowerlock":
interlocks.Add(line);
break;
case "doorapplybrake":
interlocks.Add(line);
break;
case "neutralrvrbrake":
interlocks.Add(line);
break;
case "directionindicator":
interlocks.Add(line);
break;
case "reverserindex":
interlocks.Add(line);
break;
case "travelmetermode":
interlocks.Add(line);
break;
case "travelmeter100":
interlocks.Add(line);
break;
case "travelmeter10":
interlocks.Add(line);
break;
case "travelmeter1":
interlocks.Add(line);
break;
case "travelmeter01":
interlocks.Add(line);
break;
case "travelmeter001":
interlocks.Add(line);
break;
case "effectivervrindex":
interlocks.Add("directionindicator=" + value);
break;
case "klaxonindicator":
//Remove key assignments from klaxonindicator
string[] splitklaxonindicator = value.Split(',');
var splitarray = new int[splitklaxonindicator.Length + 1];
for (int j = 0; j < splitklaxonindicator.Length; j++)
{
if (j <= 1)
{
splitarray[j] = Int32.Parse(splitklaxonindicator[j], NumberStyles.Number, CultureInfo.InvariantCulture);
}
else
{
splitarray[2] = Int32.Parse(splitklaxonindicator[0], NumberStyles.Number, CultureInfo.InvariantCulture);
splitarray[3] = Int32.Parse(splitklaxonindicator[j], NumberStyles.Number, CultureInfo.InvariantCulture);
}
}
string finishedvalue = "klaxonindicator=" + string.Join(",", Array.ConvertAll(splitarray, Convert.ToString));
interlocks.Add(finishedvalue);
break;
case "customindicators":
string[] splitcustomindicators = value.Split(',');
var splitarray1 = new int[splitcustomindicators.Length / 2];
int k = 0;
for (int j = 0; j < splitcustomindicators.Length; j++)
{
if (j % 2 == 0)
{
InternalFunctions.UpgradeKey(splitcustomindicators[j], ref parsedKey, key + j / 2);
keys.Add("customindicatorkey" + (j / 2 + 1) + "=" + parsedKey);
}
else
{
splitarray1[k] = Int32.Parse(splitcustomindicators[j]);
k++;
}
}
string finishedvalue1 = "customindicators=" + string.Join(",", Array.ConvertAll(splitarray1, Convert.ToString));
interlocks.Add(finishedvalue1);
break;
//VALUES TO BE ADDED TO THE WINDSCREEN SECTION OF THE CONFIGURATION FILE
case "wiperindex":
windscreen.Add(line);
break;
case "wiperrate":
windscreen.Add(line);
break;
case "wiperdelay":
windscreen.Add(line);
break;
case "wiperholdposition":
windscreen.Add(line);
break;
case "wiperonkey":
case "wiperoffkey":
InternalFunctions.UpgradeKey(value, ref parsedKey, key);
keys.Add(key + "=" + parsedKey);
break;
case "numberofdrops":
windscreen.Add(line);
break;
case "dropstartindex":
windscreen.Add(line);
break;
case "dropsound":
windscreen.Add(line);
break;
case "wipersound":
//Convert to drywipe & wipersoundbehaviour
string[] splitwipersound = value.Split(',');
for (int j = 0; j < splitwipersound.Length; j++)
{
if (j == 0)
{
windscreen.Add("drywipesound=" + Convert.ToString(Int32.Parse(splitwipersound[j], NumberStyles.Number, CultureInfo.InvariantCulture)));
}
if (j == 1)
{
windscreen.Add("wipersoundbehaviour=0");
}
}
break;
case "system":
//Ignore this one, and don't add as an error
//Safety systems are only instanciated as necessary
mySystem = Int32.Parse(value);
break;
case "awsacknowledgekey":
string[] splitKey = value.Split(',');
for (int j = 0; j < splitKey.Length; j++)
{
if (j == 0)
{
InternalFunctions.UpgradeKey(splitKey[0], ref parsedKey, key);
keys.Add("awskey=" + parsedKey);
}
if (j == 1)
{
AWS.Add("cancelbuttonindex=" + Convert.ToString(Int32.Parse(splitKey[j], NumberStyles.Number, CultureInfo.InvariantCulture)));
}
}
break;
default:
errors.Add(line);
break;
}
}
}
List <string> newLines = new List <string>();
//Create new configuration file and cycle through the newly created arrays to upgrade the original configuration file.
/*Write out the generator version and warning
* Version 1 files handle OS_ATS only
* Version 2 files handle OS_SZ_ATS files
* Version 3 files twiddle with key assignments slightly
* Version 4 fixes custom OS_ATS keys
* TODO: Re-generate files if a version 1 file is detected with OS_SZ_ATS present
*/
newLines.Add(";GenVersion=4");
newLines.Add(";DELETE THE ABOVE LINE IF YOU MODIFY THIS FILE");
newLines.Add("");
//Traction Type First
if (electric.Count > 0 && steamtype != true && dieseltype != true)
{
newLines.Add("[Electric]");
newLines.AddRange(common);
newLines.AddRange(electric);
}
if (steamtype == true)
{
newLines.Add("[Steam]");
newLines.AddRange(common);
newLines.AddRange(steam);
}
if (dieseltype == true)
{
newLines.Add("[Diesel]");
newLines.AddRange(common);
newLines.AddRange(diesel);
}
newLines.Add("[Interlocks]");
newLines.AddRange(interlocks);
newLines.Add("[Vigilance]");
newLines.AddRange(vigilance);
if (mySystem == 1 || mySystem == 2)
{
newLines.Add("[AWS]");
newLines.AddRange(AWS);
}
if (mySystem == 2)
{
newLines.Add("[TPWS]");
newLines.AddRange(TPWS);
}
if (mySystem == 3)
{
}
newLines.Add("[Windscreen]");
newLines.AddRange(windscreen);
//Use the legacy set key assignments
newLines.Add("[LegacyKeyAssignments]");
newLines.AddRange(keys);
using (StreamWriter sw = File.AppendText(Path.Combine(trainpath, "error.log")))
{
//Write out upgrade errors to log file
sw.WriteLine("The following unsupported paramaters were detected whilst attempting to upgrade the existing configuration file:");
foreach (string item in errors)
{
sw.WriteLine(item);
}
}
return(newLines.ToArray());
}
/// <summary>Call this function to initialise the gearbox</summary>
internal void Initialize()
{
var geararray = new int[] { };
var gearfadeinarray = new int[] { };
var gearfadeoutarray = new int[] { };
//First, test whether we have a correctly setup gearbox
if (GearRatios != null && GearFadeInRanges != null && GearFadeOutRanges != null)
{
try
{
//Split gear ratios into an array
var splitgearratios = GearRatios.Split(',');
geararray = new int[splitgearratios.Length];
for (var i = 0; i < geararray.Length; i++)
{
geararray[i] = (int)(double.Parse(splitgearratios[i], CultureInfo.InvariantCulture));
}
}
catch
{
InternalFunctions.LogError("gearratios", 0);
}
try
{
//Split gear fade in range into an array
var splitgearfade = GearFadeOutRanges.Split(',');
gearfadeinarray = new int[splitgearfade.Length];
for (var i = 0; i < gearfadeinarray.Length; i++)
{
gearfadeinarray[i] = (int)double.Parse(splitgearfade[i], NumberStyles.Number, CultureInfo.InvariantCulture);
}
}
catch
{
InternalFunctions.LogError("gearfadeinrange", 0);
}
try
{
//Split gear fade out range into an array
var splitgearfade1 = GearFadeOutRanges.Split(',');
gearfadeoutarray = new int[splitgearfade1.Length];
for (var i = 0; i < gearfadeoutarray.Length; i++)
{
gearfadeoutarray[i] =
(int)double.Parse(splitgearfade1[i], NumberStyles.Number, CultureInfo.InvariantCulture);
}
}
catch
{
InternalFunctions.LogError("gearfadeoutrange", 0);
}
if (geararray.Length != gearfadeinarray.Length && geararray.Length != gearfadeoutarray.Length)
{
var i = 0;
while (i < geararray.Length)
{
//Add the gear to the gearbox
Gears[i].GearRatio = geararray[i];
Gears[i].FadeInRange = gearfadeinarray[i];
Gears[i].FadeOutRange = gearfadeoutarray[i];
i++;
}
}
else
{
InternalFunctions.LogError("gearratios, gearfadeinrange and gearfadeoutrange should be of identical lengths.", 6);
}
}
//Return the total number of gears plus one [Neutral]
TotalGears = Gears.Count + 1;
}
