コード例 #1
0
        /// <summary>
        /// Sample code to hande a couple of different cards based on the identification process
        /// </summary>
        /// <returns>None</returns>
        private async Task HandleCard(SmartCard card)
        {
            try
            {
                // Clear the messages
                MainPage.Current.NotifyUser(String.Empty, NotifyType.StatusMessage, true);

                // Connect to the card
                using (SmartCardConnection connection = await card.ConnectAsync())
                {
                    // Try to identify what type of card it was
                    IccDetection cardIdentification = new IccDetection(card, connection);
                    await cardIdentification.DetectCardTypeAync();
                    LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
                    LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
                    LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));

                    if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
                        (cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
                        || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
                        || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
                    {
                        // Handle MIFARE Ultralight
                        MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);

                        // Each read should get us 16 bytes/4 blocks, so doing
                        // 4 reads will get us all 64 bytes/16 blocks on the card
                        for (byte i = 0; i < 4; i++)
                        {
                            byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
                            LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
                        }

                        byte[] responseUid = await mifareULAccess.GetUidAsync();
                        LogMessage("UID:  " + BitConverter.ToString(responseUid));
                    }
                    else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.MifareDesfire)
                    {
                        // Handle MIFARE DESfire
                        Desfire.AccessHandler desfireAccess = new Desfire.AccessHandler(connection);
                        Desfire.CardDetails desfire = await desfireAccess.ReadCardDetailsAsync();

                        LogMessage("DesFire Card Details:  " + Environment.NewLine + desfire.ToString());
                    }
                    else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                        && cardIdentification.PcscCardName == Pcsc.CardName.FeliCa)
                    {
                        // Handle Felica
                        LogMessage("Felica card detected");
                        var felicaAccess = new Felica.AccessHandler(connection);
                        var uid = await felicaAccess.GetUidAsync();
                        LogMessage("UID:  " + BitConverter.ToString(uid));
                    }
                    else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                        && (cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard1K || cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard4K))
                    {
                        // Handle MIFARE Standard/Classic
                        LogMessage("MIFARE Standard/Classic card detected");
                        var mfStdAccess = new MifareStandard.AccessHandler(connection);
                        var uid = await mfStdAccess.GetUidAsync();
                        LogMessage("UID:  " + BitConverter.ToString(uid));

                        ushort maxAddress = 0;
                        switch (cardIdentification.PcscCardName)
                        {
                            case Pcsc.CardName.MifareStandard1K:
                                maxAddress = 0x3f;
                                break;
                            case Pcsc.CardName.MifareStandard4K:
                                maxAddress = 0xff;
                                break;
                        }
                        await mfStdAccess.LoadKeyAsync(MifareStandard.DefaultKeys.FactoryDefault);

                        for (ushort address = 0; address <= maxAddress; address++)
                        {
                            var response = await mfStdAccess.ReadAsync(address, Pcsc.GeneralAuthenticate.GeneralAuthenticateKeyType.MifareKeyA);
                            LogMessage("Block " + address.ToString() + " " + BitConverter.ToString(response));
                        }
                    }
                    else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                        && (cardIdentification.PcscCardName == Pcsc.CardName.ICODE1 ||
                            cardIdentification.PcscCardName == Pcsc.CardName.ICODESLI ||
                            cardIdentification.PcscCardName == Pcsc.CardName.iCodeSL2))
                    {
                        // Handle ISO15693
                        LogMessage("ISO15693 card detected");
                        var iso15693Access = new Iso15693.AccessHandler(connection);
                        var uid = await iso15693Access.GetUidAsync();
                        LogMessage("UID:  " + BitConverter.ToString(uid));
                    }
                    else
                    {
                        // Unknown card type
                        // Note that when using the XDE emulator the card's ATR and type is not passed through, so we'll
                        // end up here even for known card types if using the XDE emulator

                        // Some cards might still let us query their UID with the PC/SC command, so let's try:
                        var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
                        if (!apduRes.Succeeded)
                        {
                            LogMessage("Failure getting UID of card, " + apduRes.ToString());
                        }
                        else
                        {
                            LogMessage("UID:  " + BitConverter.ToString(apduRes.ResponseData));
                        }
                    }
                }
            }
            catch(Exception ex)
            {
                LogMessage("Exception handling card: " + ex.ToString(), NotifyType.ErrorMessage);
            }
        }
コード例 #2
0
ファイル: DumpRestorer.xaml.cs プロジェクト: exelix11/Amiigo
        private async Task HandleCard(SmartCard card)
        {
            try
            {
                connection = await card.ConnectAsync();
                IccDetection cardIdentification = new IccDetection(card, connection);
                await cardIdentification.DetectCardTypeAync();
                LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
                LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
                LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));

                if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
                    (cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
                {
                    MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
                    
                    byte[] responseUid = await mifareULAccess.GetUidAsync();
                    LogMessage("UID:  " + BitConverter.ToString(responseUid));
                    if (!BinaryDump && !ByteArrayEqual(responseUid, AmiiboUID)) //I used this because for some reasons responseUid == AmiiboUID was always false
                    {
                        MessageDialog dialog = new MessageDialog("The dump UID and the amiibo UID don't match");
                        LogMessage("Amiibo UID: " + BitConverter.ToString(responseUid) + " != Dump UID: " + BitConverter.ToString(AmiiboUID));
                        await dialog.ShowAsync();
                        return;
                    }
                    LogMessage("Using key: " + BitConverter.ToString(AmiiboPass));
                    byte[] Authresponse = await mifareULAccess.TransparentExchangeAsync(new byte[] { 0x1B, AmiiboPass[0], AmiiboPass[1], AmiiboPass[2], AmiiboPass[3] }); //PWD_AUTH
                    LogMessage("Auth sent !");
                    LogMessage("Auth Response length: " + Authresponse.Length.ToString());
                    if (Authresponse.Length == 0)
                    {
                        LogMessage("No response from Amiibo, can't restore dump !");
                        MessageDialog dlg = new MessageDialog("No response from Amiibo, wrong password ?");
                        await dlg.ShowAsync();
                        return;
                    }
                    LogMessage("Auth response: " + BitConverter.ToString(Authresponse));
                    //Using page layout from: https://www.3dbrew.org/wiki/Amiibo#Page_layout
                    #region WritePages
                    mifareULAccess.WriteAsync(0x4, getNBytes(AmiiboDump,0x10));
                    LogMessage("Page 0x4 wrote !");
                    mifareULAccess.WriteAsync(0x5, getNBytes(AmiiboDump, 0x14));
                    LogMessage("Page 0x5 wrote !");
                    mifareULAccess.WriteAsync(0x6, getNBytes(AmiiboDump, 0x18));
                    LogMessage("Page 0x6 wrote !");
                    mifareULAccess.WriteAsync(0x7, getNBytes(AmiiboDump, 0x1C));
                    LogMessage("Page 0x7 wrote !");
                    mifareULAccess.WriteAsync(0x8, getNBytes(AmiiboDump, 0x20));
                    LogMessage("Page 0x8 wrote !");
                    mifareULAccess.WriteAsync(0x9, getNBytes(AmiiboDump, 0x24));
                    LogMessage("Page 0x9 wrote !");
                    mifareULAccess.WriteAsync(0xA, getNBytes(AmiiboDump, 0x28));
                    LogMessage("Page 0xA wrote !");
                    mifareULAccess.WriteAsync(0xB, getNBytes(AmiiboDump, 0x2C));
                    LogMessage("Page 0xB wrote !");
                    mifareULAccess.WriteAsync(0xC, getNBytes(AmiiboDump, 0x30));
                    LogMessage("Page 0xC wrote !");
                    mifareULAccess.WriteAsync(0x20, getNBytes(AmiiboDump, 0x80));
                    LogMessage("Page 0x20 wrote !");
                    mifareULAccess.WriteAsync(0x21, getNBytes(AmiiboDump, 0x84));
                    LogMessage("Page 0x21 wrote !");
                    mifareULAccess.WriteAsync(0x22, getNBytes(AmiiboDump, 0x88));
                    LogMessage("Page 0x22 wrote !");
                    mifareULAccess.WriteAsync(0x23, getNBytes(AmiiboDump, 0x8C));
                    LogMessage("Page 0x23 wrote !");
                    mifareULAccess.WriteAsync(0x24, getNBytes(AmiiboDump, 0x90));
                    LogMessage("Page 0x24 wrote !");
                    mifareULAccess.WriteAsync(0x25, getNBytes(AmiiboDump, 0x94));
                    LogMessage("Page 0x25 wrote !");
                    mifareULAccess.WriteAsync(0x26, getNBytes(AmiiboDump, 0x98));
                    LogMessage("Page 0x26 wrote !");
                    mifareULAccess.WriteAsync(0x27, getNBytes(AmiiboDump, 0x9c));
                    LogMessage("Page 0x27 wrote !");//Until here i manually wrote the write addreses to test if the writing works, but i'm too lazy to replace those arleady working functions with a cycle
                    for (int i = 0; i < 0x5A; i++) mifareULAccess.WriteAsync((byte)(0x28/*Page*/ + i), getNBytes(AmiiboDump, 0xA0 /*ADDR of page 0x28*/ + (i*4)));
                    LogMessage("Page 0x28 to 0x81 wrote !");
                    #endregion
                    LogMessage("Dump restored :) !");
                    MessageDialog msg = new MessageDialog("Dump restored !");
                    await msg.ShowAsync();
                }
                else
                {
                    LogMessage("This tag is not an Amiibo !");
                    MessageDialog msg = new MessageDialog("This tag is not an Amiibo !");
                    await msg.ShowAsync();
                    var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
                    if (!apduRes.Succeeded)
                    {
                        LogMessage("Failure getting UID of card, " + apduRes.ToString());
                    }
                    else
                    {
                        LogMessage("UID:  " + BitConverter.ToString(apduRes.ResponseData));
                    }
                }
                connection.Dispose();
            }
            catch (Exception ex)
            {
                connection.Dispose();
                LogMessage("Exception handling card: " + ex.ToString());
                MessageDialog msg = new MessageDialog("Exception handling card: " + ex.ToString());
                await msg.ShowAsync();
            }
        }
コード例 #3
0
        /// <summary>
        /// Sample code to hande a couple of different cards based on the identification process
        /// </summary>
        /// <returns>None</returns>
        private async Task HandleCard(SmartCard card)
        {
            try
            {
                // Clear the messages
                MainPage.Current.NotifyUser(String.Empty, NotifyType.StatusMessage, true);

                // Connect to the card
                var connection = await card.ConnectAsync();

                // Try to identify what type of card it was
                IccDetection cardIdentification = new IccDetection(card, connection);
                await cardIdentification.DetectCardTypeAync();
                LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
                LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());

                if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
                    (cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
                {
                    // Handle MIFARE Ultralight
                    MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);

                    // Each read should get us 16 bytes/4 blocks, so doing
                    // 4 reads will get us all 64 bytes/16 blocks on the card
                    for (byte i = 0; i < 4; i++)
                    {
                        byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
                        LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
                    }

                    byte[] responseUid = await mifareULAccess.GetUidAsync();
                    LogMessage("UID:  " + BitConverter.ToString(responseUid));
                }
                else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.MifareDesfire)
                {
                    // Handle MIFARE DESfire
                    Desfire.AccessHandler desfireAccess = new Desfire.AccessHandler(connection);
                    Desfire.CardDetails desfire = await desfireAccess.ReadCardDetailsAsync();

                    LogMessage("DesFire Card Details:  " + Environment.NewLine + desfire.ToString());
                }
                else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                    && cardIdentification.PcscCardName == Pcsc.CardName.FeliCa)
                {
                    // Handle Felica
                    LogMessage("Felica card detected");
                    var felicaAccess = new Felica.AccessHandler(connection);
                    var uid = await felicaAccess.GetUidAsync();
                    LogMessage("UID:  " + BitConverter.ToString(uid));
                }
                else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                    && (cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard1K || cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard4K))
                {
                    // Handle MIFARE Standard/Classic
                    LogMessage("MIFARE Standard/Classic card detected");
                    var mfStdAccess = new MifareStandard.AccessHandler(connection);
                    var uid = await mfStdAccess.GetUidAsync();
                    LogMessage("UID:  " + BitConverter.ToString(uid));

                    ushort maxAddress = 0;
                    switch (cardIdentification.PcscCardName)
                    {
                        case Pcsc.CardName.MifareStandard1K:
                            maxAddress = 0x3f;
                            break;
                        case Pcsc.CardName.MifareStandard4K:
                            maxAddress = 0xff;
                            break;
                    }
                    await mfStdAccess.LoadKeyAsync(MifareStandard.DefaultKeys.FactoryDefault);

                    for (ushort address = 0; address <= maxAddress; address++)
                    {
                        var response = await mfStdAccess.ReadAsync(address, Pcsc.GeneralAuthenticate.GeneralAuthenticateKeyType.MifareKeyA);
                        LogMessage("Block " + address.ToString() + " " + BitConverter.ToString(response));
                    }
                }
                else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
                    && (cardIdentification.PcscCardName == Pcsc.CardName.ICODE1 ||
                        cardIdentification.PcscCardName == Pcsc.CardName.ICODESLI ||
                        cardIdentification.PcscCardName == Pcsc.CardName.iCodeSL2))
                {
                    // Handle ISO15693
                    LogMessage("ISO15693 card detected");
                    var iso15693Access = new Iso15693.AccessHandler(connection);
                    var uid = await iso15693Access.GetUidAsync();
                    LogMessage("UID:  " + BitConverter.ToString(uid));
                }

                connection.Dispose();
            }
            catch(Exception ex)
            {
                LogMessage("Exception handling card: " + ex.ToString(), NotifyType.ErrorMessage);
            }
        }
コード例 #4
0
ファイル: MainPage.xaml.cs プロジェクト: exelix11/Amiigo
        private async Task HandleCard(SmartCard card)
        {
            try
            {
                connection = await card.ConnectAsync();
                IccDetection cardIdentification = new IccDetection(card, connection);
                await cardIdentification.DetectCardTypeAync();
                LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
                LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
                LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));

                if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
                    (cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
                    || cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
                {
                    MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
                    List<byte> dumpTmp = new List<byte>();

                    byte[] responseUid = await mifareULAccess.GetUidAsync();
                    dumpTmp.AddRange(new byte[] { 0x41, 0x6D, 0x69, 0x69, 0x67, 0x6F, 0x44, 0x75, 0x6D, 0x70, 0x00, 0x00, 0x00, 0x00 }); //MAGIC
                    LogMessage("UID:  " + BitConverter.ToString(responseUid));
                    dumpTmp.AddRange(responseUid);
                    dumpTmp.AddRange(new byte[4]);
                    for (byte i = 0; i < 33; i++)
                    {
                        byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
                        dumpTmp.AddRange(response);
                        LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
                    }
                    LogMessage("Dump ended :) !");
                    dumpTmp.AddRange(new byte[4] { 0x5F, 0x00, 0x00, 0x00 });
                    Dump = dumpTmp.ToArray();
                    MessageDialog msg = new MessageDialog("Dump completed !");
                    await msg.ShowAsync();
                }
                else
                {
                    LogMessage("This tag is not an Amiibo and can't be dumped!");
                    MessageDialog msg = new MessageDialog("This tag is not an Amiibo and can't be dumped !");
                    await msg.ShowAsync();
                    var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
                    if (!apduRes.Succeeded)
                    {
                        LogMessage("Failure getting UID of card, " + apduRes.ToString());
                    }
                    else
                    {
                        LogMessage("UID:  " + BitConverter.ToString(apduRes.ResponseData));
                    }
                }
                connection.Dispose();
            }
            catch (Exception ex)
            {
                connection.Dispose();
                LogMessage("Exception handling card: " + ex.ToString());
                MessageDialog msg = new MessageDialog("Exception handling card: " + ex.ToString());
                await msg.ShowAsync();
            }
        }