コード例 #1
0
ファイル: Floor0.cs プロジェクト: YJh2046/BlockFun
		override public Object unpack(Info vi , csBuffer opb)
		{
			InfoFloor0 info=new InfoFloor0();
			info.order=opb.read(8);
			info.rate=opb.read(16);
			info.barkmap=opb.read(16);
			info.ampbits=opb.read(6);
			info.ampdB=opb.read(8);
			info.numbooks=opb.read(4)+1;
  
			if((info.order<1)||
				(info.rate<1)||
				(info.barkmap<1)||
				(info.numbooks<1))
			{
				//free_info(info);
				return(null);
			}

			for(int j=0;j<info.numbooks;j++)
			{
				info.books[j]=opb.read(8);
				if(info.books[j]<0 || info.books[j]>=vi.books)
				{
					//free_info(info);
					return(null);
				}
			}
			return(info);  
			//  err_out:
			//    free_info(info);
			//    return(NULL);
		}
コード例 #2
0
ファイル: Mapping0.cs プロジェクト: YJh2046/BlockFun
		override public void pack(Info vi, Object imap, csBuffer opb)
		{
			InfoMapping0 info=(InfoMapping0)imap;

			/* another 'we meant to do it this way' hack...  up to beta 4, we
			   packed 4 binary zeros here to signify one submapping in use.  We
			   now redefine that to mean four bitflags that indicate use of
			   deeper features; bit0:submappings, bit1:coupling,
			   bit2,3:reserved. This is backward compatable with all actual uses
			   of the beta code. */

			if(info.submaps>1)
			{
				opb.write(1,1);
				opb.write(info.submaps-1,4);
			}
			else
			{
				opb.write(0,1);
			}

			if(info.coupling_steps>0)
			{
				opb.write(1,1);
				opb.write(info.coupling_steps-1,8);
				for(int i=0;i<info.coupling_steps;i++)
				{
					opb.write(info.coupling_mag[i],ilog2(vi.channels));
					opb.write(info.coupling_ang[i],ilog2(vi.channels));
				}
			}
			else
			{
				opb.write(0,1);
			}
  
			opb.write(0,2); /* 2,3:reserved */

			/* we don't write the channel submappings if we only have one... */
			if(info.submaps>1)
			{
				for(int i=0;i<vi.channels;i++)
					opb.write(info.chmuxlist[i],4);
			}
			for(int i=0;i<info.submaps;i++)
			{
				opb.write(info.timesubmap[i],8);
				opb.write(info.floorsubmap[i],8);
				opb.write(info.residuesubmap[i],8);
			}
		}
コード例 #3
0
ファイル: Residue0.cs プロジェクト: YJh2046/BlockFun
		override public Object unpack(Info vi, csBuffer opb)
		{
			int acc=0;
			InfoResidue0 info=new InfoResidue0();

			info.begin=opb.read(24);
			info.end=opb.read(24);
			info.grouping=opb.read(24)+1;
			info.partitions=opb.read(6)+1;
			info.groupbook=opb.read(8);

			for(int j=0;j<info.partitions;j++)
			{
				int cascade=opb.read(3);
				if(opb.read(1)!=0)
				{
					cascade|=(opb.read(5)<<3);
				}
				info.secondstages[j]=cascade;
				acc+=icount(cascade);
			}

			for(int j=0;j<acc;j++)
			{
				info.booklist[j]=opb.read(8);
				//    if(info.booklist[j]==255)info.booklist[j]=-1;
			}

			if(info.groupbook>=vi.books)
			{
				free_info(info);
				return(null);
			}

			for(int j=0;j<acc;j++)
			{
				if(info.booklist[j]>=vi.books)
				{
					free_info(info);
					return(null);
				}
			}
			return(info);
			//  errout:
			//    free_info(info);
			//    return(NULL);
		}
コード例 #4
0
 public abstract Object unpack(Info vi, csBuffer opb);
コード例 #5
0
ファイル: VorbisFile.cs プロジェクト: knot3/OggSharp
        // uses the local ogg_stream storage in vf; this is important for
        // non-streaming input sources
        int fetch_headers(Info vi, Comment vc, int[] serialno, Page og_ptr)
        {
            //System.err.println("fetch_headers");
            Page og=new Page();
            Packet op=new Packet();
            int ret;

            if(og_ptr==null) {
                ret=get_next_page(og, CHUNKSIZE);
                if(ret==OV_EREAD) { return OV_EREAD; }
                if(ret<0) { return OV_ENOTVORBIS; }
                og_ptr=og;
            }

            if(serialno!=null) { serialno[0]=og_ptr.serialno(); }

            os.init(og_ptr.serialno());

            // extract the initial header from the first page and verify that the
            // Ogg bitstream is in fact Vorbis data

            vi.init();
            vc.init();

            int i=0;
            while(i<3) {
                os.pagein(og_ptr);
                while(i<3) {
                    int result=os.packetout(op);
                    if(result==0) { break; }
                    if(result==-1) {
                        Console.Error.WriteLine("Corrupt header in logical bitstream.");
                        //goto bail_header;
                        vi.clear();
                        vc.clear();
                        os.clear();
                        return -1;
                    }
                    if(vi.synthesis_headerin(vc, op)!=0) {
                        Console.Error.WriteLine("Illegal header in logical bitstream.");
                        //goto bail_header;
                        vi.clear();
                        vc.clear();
                        os.clear();
                        return -1;
                    }
                    i++;
                }
                if(i<3)
                    if(get_next_page(og_ptr, 1)<0) {
                        Console.Error.WriteLine("Missing header in logical bitstream.");
                        //goto bail_header;
                        vi.clear();
                        vc.clear();
                        os.clear();
                        return -1;
                    }
            }
            return 0;
        }
コード例 #6
0
ファイル: VorbisFile.cs プロジェクト: knot3/OggSharp
        // last step of the OggVorbis_File initialization; get all the
        // vorbis_info structs and PCM positions.  Only called by the seekable
        // initialization (local stream storage is hacked slightly; pay
        // attention to how that's done)
        void prefetch_all_headers(Info first_i,Comment first_c, int dataoffset)
        {
            Page og=new Page();
            int ret;

            vi=new Info[links];
            vc=new Comment[links];
            dataoffsets=new long[links];
            pcmlengths=new long[links];
            serialnos=new int[links];

            for(int i=0; i<links; i++) {
                if(first_i!=null && first_c!=null && i==0) {
                    // we already grabbed the initial header earlier.  This just
                    // saves the waste of grabbing it again
                    // !!!!!!!!!!!!!
                    vi[i]=first_i;
                    //memcpy(vf->vi+i,first_i,sizeof(vorbis_info));
                    vc[i]=first_c;
                    //memcpy(vf->vc+i,first_c,sizeof(vorbis_comment));
                    dataoffsets[i]=dataoffset;
                }
                else {
                    // seek to the location of the initial header
                    seek_helper(offsets[i]); //!!!
                    if(fetch_headers(vi[i], vc[i], null, null)==-1) {
                        Console.Error.WriteLine("Error opening logical bitstream #"+(i+1)+"\n");
                        dataoffsets[i]=-1;
                    }
                    else {
                        dataoffsets[i]=offset;
                        os.clear();
                    }
                }

                // get the serial number and PCM length of this link. To do this,
                // get the last page of the stream
                long end=offsets[i+1]; //!!!
                seek_helper(end);

                while(true) {
                    ret=get_prev_page(og);
                    if(ret==-1) {
                        // this should not be possible
                        Console.Error.WriteLine("Could not find last page of logical "+
                                                "bitstream #"+(i)+"\n");
                        vi[i].clear();
                        vc[i].clear();
                        break;
                    }
                    if(og.granulepos()!=-1) {
                        serialnos[i]=og.serialno();
                        pcmlengths[i]=og.granulepos();
                        break;
                    }
                }
            }
        }
コード例 #7
0
ファイル: VorbisFile.cs プロジェクト: knot3/OggSharp
 int open_seekable()
 {
     Info initial_i=new Info();
     Comment initial_c=new Comment();
     int serialno;
     long end;
     int ret;
     int dataoffset;
     Page og=new Page();
     // is this even vorbis...?
     int[] foo=new int[1];
     ret=fetch_headers(initial_i, initial_c, foo, null);
     serialno=foo[0];
     dataoffset=(int)offset; //!!
     os.clear();
     if(ret==-1) { return(-1); }
     // we can seek, so set out learning all about this file
     skable=true;
     //(callbacks.seek_func)(datasource, 0, SEEK_END);
     fseek(datasource, 0, SEEK_END);
     //offset=end=(callbacks.tell_func)(datasource);
     offset=ftell(datasource);
     end=offset;
     // We get the offset for the last page of the physical bitstream.
     // Most OggVorbis files will contain a single logical bitstream
     end=get_prev_page(og);
     // moer than one logical bitstream?
     if(og.serialno()!=serialno) {
         // Chained bitstream. Bisect-search each logical bitstream
         // section.  Do so based on serial number only
         if(bisect_forward_serialno(0,0,end+1,serialno,0)<0) {
             clear();
             return OV_EREAD;
         }
     }
     else {
         // Only one logical bitstream
         if(bisect_forward_serialno(0,end,end+1,serialno,0)<0) {
             clear();
             return OV_EREAD;
         }
     }
     prefetch_all_headers(initial_i, initial_c, dataoffset);
     return(raw_seek(0));
 }
コード例 #8
0
 public abstract void pack(Info info, Object imap, csBuffer buffer);
コード例 #9
0
ファイル: FuncMapping.cs プロジェクト: knot3/OggSharp
 public abstract Object unpack(Info info , csBuffer buffer);
コード例 #10
0
ファイル: DspState.cs プロジェクト: knot3/OggSharp
        // Analysis side code, but directly related to blocking.  Thus it's
        // here and not in analysis.c (which is for analysis transforms only).
        // The init is here because some of it is shared
        int init(Info vi, bool encp)
        {
            //memset(v,0,sizeof(vorbis_dsp_state));
            this.vi=vi;
            modebits=ilog2(vi.modes);

            transform[0]=new Object[VI_TRANSFORMB];
            transform[1]=new Object[VI_TRANSFORMB];

            // MDCT is tranform 0

            transform[0][0]=new Mdct();
            transform[1][0]=new Mdct();
            ((Mdct)transform[0][0]).init(vi.blocksizes[0]);
            ((Mdct)transform[1][0]).init(vi.blocksizes[1]);

            wnd[0][0][0]=new float[VI_WINDOWB][];
            wnd[0][0][1]=wnd[0][0][0];
            wnd[0][1][0]=wnd[0][0][0];
            wnd[0][1][1]=wnd[0][0][0];
            wnd[1][0][0]=new float[VI_WINDOWB][];
            wnd[1][0][1]=new float[VI_WINDOWB][];
            wnd[1][1][0]=new float[VI_WINDOWB][];
            wnd[1][1][1]=new float[VI_WINDOWB][];

            for(int i=0; i<VI_WINDOWB; i++) {
                wnd[0][0][0][i]=
                    window(i,vi.blocksizes[0],vi.blocksizes[0]/2,vi.blocksizes[0]/2);
                wnd[1][0][0][i]=
                    window(i,vi.blocksizes[1],vi.blocksizes[0]/2,vi.blocksizes[0]/2);
                wnd[1][0][1][i]=
                    window(i,vi.blocksizes[1],vi.blocksizes[0]/2,vi.blocksizes[1]/2);
                wnd[1][1][0][i]=
                    window(i,vi.blocksizes[1],vi.blocksizes[1]/2,vi.blocksizes[0]/2);
                wnd[1][1][1][i]=
                    window(i,vi.blocksizes[1],vi.blocksizes[1]/2,vi.blocksizes[1]/2);
            }

            //    if(encp){ // encode/decode differ here
            //      // finish the codebooks
            //      fullbooks=new CodeBook[vi.books];
            //      for(int i=0;i<vi.books;i++){
            //	fullbooks[i]=new CodeBook();
            //	fullbooks[i].init_encode(vi.book_param[i]);
            //      }
            //      analysisp=1;
            //    }
            //    else{
            // finish the codebooks
            fullbooks=new CodeBook[vi.books];
            for(int i=0; i<vi.books; i++) {
                fullbooks[i]=new CodeBook();
                fullbooks[i].init_decode(vi.book_param[i]);
            }

            //    }

            // initialize the storage vectors to a decent size greater than the
            // minimum

            pcm_storage=8192; // we'll assume later that we have
            // a minimum of twice the blocksize of
            // accumulated samples in analysis
            pcm=new float[vi.channels][];
            //pcmret=new float[vi.channels][];
            {
                for(int i=0; i<vi.channels; i++) {
                    pcm[i]=new float[pcm_storage];
                }
            }

            // all 1 (large block) or 0 (small block)
            // explicitly set for the sake of clarity
            lW=0; // previous window size
            W=0;  // current window size

            // all vector indexes; multiples of samples_per_envelope_step
            centerW=vi.blocksizes[1]/2;

            pcm_current=centerW;

            // initialize all the mapping/backend lookups
            mode=new Object[vi.modes];

            for(int i=0; i<vi.modes; i++) {
                int mapnum=vi.mode_param[i].mapping;
                int maptype=vi.map_type[mapnum];

                mode[i]=FuncMapping.mapping_P[maptype].look(this,vi.mode_param[i],
                        vi.map_param[mapnum]);

            }
            return(0);
        }
コード例 #11
0
        public int synthesis(Packet op)
        {
            Info vi = vd.vi;

            // first things first.  Make sure decode is ready
            // ripcord();
            opb.readinit(op.packet_base, op.packet, op.bytes);

            // Check the packet type
            if (opb.read(1) != 0)
            {
                // Oops.  This is not an audio data packet
                return(-1);
            }

            // read our mode and pre/post windowsize
            int _mode = opb.read(vd.modebits);

            if (_mode == -1)
            {
                return(-1);
            }

            mode = _mode;
            W    = vi.mode_param[mode].blockflag;
            if (W != 0)
            {
                lW = opb.read(1);
                nW = opb.read(1);
                if (nW == -1)
                {
                    return(-1);
                }
            }
            else
            {
                lW = 0;
                nW = 0;
            }

            // more setup
            granulepos = op.granulepos;
            sequence   = op.packetno - 3; // first block is third packet
            eofflag    = op.e_o_s;

            // alloc pcm passback storage
            pcmend = vi.blocksizes[W];
            //pcm=alloc(vi.channels);
            if (pcm.Length < vi.channels)
            {
                pcm = new float[vi.channels][];
            }
            for (int i = 0; i < vi.channels; i++)
            {
                if (pcm[i] == null || pcm[i].Length < pcmend)
                {
                    pcm[i] = new float[pcmend];
                    //pcm[i]=alloc(pcmend);
                }
                else
                {
                    for (int j = 0; j < pcmend; j++)
                    {
                        pcm[i][j] = 0;
                    }
                }
            }

            // unpack_header enforces range checking
            int type = vi.map_type[vi.mode_param[mode].mapping];

            return(FuncMapping.mapping_P[type].inverse(this, vd.mode[mode]));
        }
コード例 #12
0
ファイル: Floor1.cs プロジェクト: YJh2046/BlockFun
		override public Object unpack(Info vi , csBuffer opb)
		{
			int count=0,maxclass=-1,rangebits;
			InfoFloor1 info=new InfoFloor1();

			/* read partitions */
			info.partitions=opb.read(5);            /* only 0 to 31 legal */
			for(int j=0;j<info.partitions;j++)
			{
				info.partitionclass[j]=opb.read(4); /* only 0 to 15 legal */
				if(maxclass<info.partitionclass[j])
					maxclass=info.partitionclass[j];
			}

			/* read partition classes */
			for(int j=0;j<maxclass+1;j++)
			{
				info.class_dim[j]=opb.read(3)+1; /* 1 to 8 */
				info.class_subs[j]=opb.read(2);  /* 0,1,2,3 bits */
				if(info.class_subs[j]<0)
				{
					//goto err_out;
					info.free();
					return(null);
				}
				if(info.class_subs[j]!=0)
				{
					info.class_book[j]=opb.read(8);
				}
				if(info.class_book[j]<0 || info.class_book[j]>=vi.books)
				{
					//goto err_out;
					info.free();
					return(null);
				}
				for(int k=0;k<(1<<info.class_subs[j]);k++)
				{
					info.class_subbook[j][k]=opb.read(8)-1;
					if(info.class_subbook[j][k]<-1 || info.class_subbook[j][k]>=vi.books)
					{
						//goto err_out;
						info.free();
						return(null);
					}
				}
			}

			/* read the post list */
			info.mult=opb.read(2)+1;     /* only 1,2,3,4 legal now */
			rangebits=opb.read(4);

			for(int j=0,k=0;j<info.partitions;j++)
			{
				count+=info.class_dim[info.partitionclass[j]];
				for(;k<count;k++)
				{
					int t=info.postlist[k+2]=opb.read(rangebits);
					if(t<0 || t>=(1<<rangebits))
					{
						//goto err_out;
						info.free();
						return(null);
					}
				}
			}
			info.postlist[0]=0;
			info.postlist[1]=1<<rangebits;

			return(info);
			//  err_out:
			//    info.free();
			//    return(null);
		}
コード例 #13
0
ファイル: Floor1.cs プロジェクト: perivar/FindSimilarCore
        override public Object unpack(Info vi, csBuffer opb)
        {
            int        count = 0, maxclass = -1, rangebits;
            InfoFloor1 info = new InfoFloor1();

            /* read partitions */
            info.partitions = opb.read(5);            /* only 0 to 31 legal */
            for (int j = 0; j < info.partitions; j++)
            {
                info.partitionclass[j] = opb.read(4); /* only 0 to 15 legal */
                if (maxclass < info.partitionclass[j])
                {
                    maxclass = info.partitionclass[j];
                }
            }

            /* read partition classes */
            for (int j = 0; j < maxclass + 1; j++)
            {
                info.class_dim[j]  = opb.read(3) + 1; /* 1 to 8 */
                info.class_subs[j] = opb.read(2);     /* 0,1,2,3 bits */
                if (info.class_subs[j] < 0)
                {
                    //goto err_out;
                    info.free();
                    return(null);
                }
                if (info.class_subs[j] != 0)
                {
                    info.class_book[j] = opb.read(8);
                }
                if (info.class_book[j] < 0 || info.class_book[j] >= vi.books)
                {
                    //goto err_out;
                    info.free();
                    return(null);
                }
                for (int k = 0; k < (1 << info.class_subs[j]); k++)
                {
                    info.class_subbook[j][k] = opb.read(8) - 1;
                    if (info.class_subbook[j][k] < -1 || info.class_subbook[j][k] >= vi.books)
                    {
                        //goto err_out;
                        info.free();
                        return(null);
                    }
                }
            }

            /* read the post list */
            info.mult = opb.read(2) + 1;     /* only 1,2,3,4 legal now */
            rangebits = opb.read(4);

            for (int j = 0, k = 0; j < info.partitions; j++)
            {
                count += info.class_dim[info.partitionclass[j]];
                for (; k < count; k++)
                {
                    int t = info.postlist[k + 2] = opb.read(rangebits);
                    if (t < 0 || t >= (1 << rangebits))
                    {
                        //goto err_out;
                        info.free();
                        return(null);
                    }
                }
            }
            info.postlist[0] = 0;
            info.postlist[1] = 1 << rangebits;

            return(info);
            //  err_out:
            //    info.free();
            //    return(null);
        }
コード例 #14
0
 public abstract Object unpack(Info info, csBuffer buffer);
コード例 #15
0
ファイル: DspState.cs プロジェクト: knot3/OggSharp
 DspState(Info vi)
     : this()
 {
     init(vi, false);
     // Adjust centerW to allow an easier mechanism for determining output
     pcm_returned=centerW;
     centerW-= vi.blocksizes[W]/4+vi.blocksizes[lW]/4;
     granulepos=-1;
     sequence=-1;
 }
コード例 #16
0
ファイル: DspState.cs プロジェクト: knot3/OggSharp
 public int synthesis_init(Info vi)
 {
     init(vi, false);
     // Adjust centerW to allow an easier mechanism for determining output
     pcm_returned=centerW;
     centerW-= vi.blocksizes[W]/4+vi.blocksizes[lW]/4;
     granulepos=-1;
     sequence=-1;
     return(0);
 }
コード例 #17
0
ファイル: Time0.cs プロジェクト: knot3/OggSharp
 public override Object unpack(Info vi , csBuffer opb)
 {
     return "";
 }
コード例 #18
0
ファイル: FuncMapping.cs プロジェクト: knot3/OggSharp
 public abstract void pack(Info info , Object imap, csBuffer buffer);
コード例 #19
0
ファイル: Mapping0.cs プロジェクト: knot3/OggSharp
        public override Object unpack(Info vi, csBuffer opb)
        {
            // also responsible for range checking
            InfoMapping0 info=new InfoMapping0();

            // !!!!
            if(opb.read(1)!=0) {
                info.submaps=opb.read(4)+1;
            }
            else {
                info.submaps=1;
            }

            if(opb.read(1)!=0) {
                info.coupling_steps=opb.read(8)+1;

                for(int i=0; i<info.coupling_steps; i++) {
                    int testM=info.coupling_mag[i]=opb.read(ilog2(vi.channels));
                    int testA=info.coupling_ang[i]=opb.read(ilog2(vi.channels));

                    if(testM<0 ||
                            testA<0 ||
                            testM==testA ||
                            testM>=vi.channels ||
                            testA>=vi.channels) {
                        //goto err_out;
                        info.free();
                        return(null);
                    }
                }
            }

            if(opb.read(2)>0) {
                /* 2,3:reserved */
                //goto err_out;
                info.free();
                return(null);
            }

            if(info.submaps>1) {
                for(int i=0; i<vi.channels; i++) {
                    info.chmuxlist[i]=opb.read(4);
                    if(info.chmuxlist[i]>=info.submaps) {
                        //goto err_out;
                        info.free();
                        return(null);
                    }
                }
            }

            for(int i=0; i<info.submaps; i++) {
                info.timesubmap[i]=opb.read(8);
                if(info.timesubmap[i]>=vi.times) {
                    //goto err_out;
                    info.free();
                    return(null);
                }
                info.floorsubmap[i]=opb.read(8);
                if(info.floorsubmap[i]>=vi.floors) {
                    //goto err_out;
                    info.free();
                    return(null);
                }
                info.residuesubmap[i]=opb.read(8);
                if(info.residuesubmap[i]>=vi.residues) {
                    //goto err_out;
                    info.free();
                    return(null);
                }
            }
            return info;
            //err_out:
            //free_info(info);
            //return(NULL);
        }
コード例 #20
0
ファイル: FuncResidue.cs プロジェクト: YJh2046/BlockFun
		public abstract Object unpack(Info vi, csBuffer opb);
コード例 #21
0
ファイル: VorbisFile.cs プロジェクト: knot3/OggSharp
        int open_nonseekable()
        {
            //System.err.println("open_nonseekable");
            // we cannot seek. Set up a 'single' (current) logical bitstream entry
            links=1;
            vi=new Info[links];
            vi[0]=new Info(); // ??
            vc=new Comment[links];
            vc[0]=new Comment(); // ?? bug?

            // Try to fetch the headers, maintaining all the storage
            int[]foo=new int[1];
            if(fetch_headers(vi[0], vc[0], foo, null)==-1) { return(-1); }
            current_serialno=foo[0];
            make_decode_ready();
            return 0;
        }