public AxesAggregate(RecordStream rs, ChartRecordAggregate container)
: base(RuleName_AXES, container)
{
if (rs.PeekNextChartSid() == AxisRecord.sid)
{
AxisRecord axis = (AxisRecord)rs.GetNext();
rs.GetNext();
int sid = rs.PeekNextChartSid();
if (sid == CatSerRangeRecord.sid)
{
ivaxis = new IVAxisAggregate(rs, this, axis);
}
else if (sid == ValueRangeRecord.sid)
{
dvaxis = new DVAxisAggregate(rs, this, axis);
}
else
{
throw new InvalidOperationException(string.Format("Invalid record sid=0x{0:X}. Shoud be CatSerRangeRecord or ValueRangeRecord", sid));
}
Debug.Assert(rs.PeekNextChartSid() == AxisRecord.sid);
dvaxisSecond = new DVAxisAggregate(rs, this, null);
if (rs.PeekNextChartSid() == AxisRecord.sid)
{
seriesAxis = new SeriesAxisAggregate(rs, this);
}
while (rs.PeekNextChartSid() == TextRecord.sid)
{
attachedLabelList.Add(new AttachedLabelAggregate(rs, this));
}
if (rs.PeekNextChartSid() == PlotAreaRecord.sid)
{
plotArea = (PlotAreaRecord)rs.GetNext();
if (rs.PeekNextChartSid() == FrameRecord.sid)
{
frame = new FrameAggregate(rs, this);
}
}
}
}
protected void WriteStartBlock(RecordVisitor rv)
{
//1
//A StartBlock record MUST not be written if the record is preceded by a StartObject record
//but not preceded by the matching EndObject record. That is, StartBlock and EndBlock pairs
//MUST not belong to any collection defined by StartObject and EndObject.
if (IsInStartObject)
{
return;
}
StartBlockRecord sbr = null;
//2
//If there does not exist a StartBlock record with iObjectKind equal to 0x000D without
//a matching EndBlock record, then a corresponding StartBlock record with iObjectKind
//equal to 0x000D MUST be written.
if (blocks.Count == 0)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Sheet);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//3
//If the chart-specific future record exists in the sequence of records that conforms to
//the DAT rule, and there does not exist a StartBlock record with iObjectKind equal to 0x0006
//without a matching EndBlock record, then a corresponding StartBlock record with iObjectKind
//equal to 0x0006 MUST be written. If a StartBlock record is written because of rule number 2,
//then this StartBlock record MUST be written immediately after that record.
if (IsInRule(RuleName_DAT) && !blocks.Contains(ObjectKind.DatRecord))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.DatRecord);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//4
//If the chart-specific future record is in a series, and there does not exist a StartBlock record
//with iObjectKind equal to 0x000C without a matching EndBlock record, then a corresponding StartBlock
//record with iObjectKind equal to 0x000C and iObjectInstance1 equal to the number of series prior to
//this series in the current Sheet MUST be written. If any StartBlock records are written because of
//rule number 2 or 3, then this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_SERIESFORMAT) && !blocks.Contains(ObjectKind.Series))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Series, 0,
GetContainer <SeriesFormatAggregate>(RuleName_SERIESFORMAT).SeriesIndex);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//5
//If the chart-specific future record exists in the sequence of records that conforms to the SS rule,
//and there does not exist a StartBlock record with iObjectKind equal to 0x000E without a matching EndBlock
//record, then a corresponding StartBlock record with iObjectKind equal to 0x000E, iObjectContext equal to
//the yi field of the DataFormat record in the current SS rule, and iObjectInstance1 equal to the xi field
//of the DataFormat record in the current SS rule MUST be written. If any StartBlock records are written
//because of rule number 2, 3, or 4, then this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_SS) && !blocks.Contains(ObjectKind.DataFormatRecord))
{
SSAggregate ss = GetContainer <SSAggregate>(RuleName_SS);
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.DataFormatRecord,
ss.DataFormat.SeriesIndex, ss.DataFormat.PointNumber);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//6
//If the chart-specific future record is in a series, and is part of a collection defined by a Begin and End
//pair written immediately after a LegendException record, and there does not exist a StartBlock record with
//iObjectKind equal to 0x000A without a matching EndBlock record, then a corresponding StartBlock record with
//iObjectKind equal to 0x000A and iObjectInstance1 equal to the iss field of the LegendException record in
//the series MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, or 5,
//then this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_LEGENDEXCEPTION) && !blocks.Contains(ObjectKind.LegendException))
{
SeriesFormatAggregate.LegendExceptionAggregate le =
GetContainer <SeriesFormatAggregate.LegendExceptionAggregate>(RuleName_LEGENDEXCEPTION);
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.LegendException, 0,
le.LegendException.LegendEntry);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//7
//If the chart-specific future record is in an axis group. and there does not exist a StartBlock record with
//iObjectKind equal to 0x0000 without a matching EndBlock record, then a corresponding StartBlock record with
//iObjectKind equal to 0x0000 and iObjectInstance1 equal to the iax field of the AxisParent record of the axis
//group MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, or 6, then
//this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_AXISPARENT) && !blocks.Contains(ObjectKind.AxisGroup))
{
AxisParentAggregate ap = GetContainer <AxisParentAggregate>(RuleName_AXISPARENT);
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AxisGroup, 0,
ap.AxisParent.AxisType);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//8
//If the chart-specific future record is in a Chart Group, and there does not exist a StartBlock record with
//iObjectKind equal to 0x0005 without a matching EndBlock record, then a corresponding StartBlock record with
//iObjectKind equal to 0x0005 and iObjectInstance1 equal to the iax field of the AxisParent record of the axis
//group MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, or 7, then
//this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_CRT) && !blocks.Contains(ObjectKind.ChartGroup))
{
AxisParentAggregate ap = GetContainer <AxisParentAggregate>(RuleName_AXISPARENT);
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.ChartGroup, 0,
ap.AxisParent.AxisType);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//9
//If the chart-specific future record is in an axis, and there does not exist a StartBlock record with iObjectKind
//equal to 0x0004 without a matching EndBlock record, then:
if (IsInRule(RuleName_AXES) && !blocks.Contains(ObjectKind.Axis))
{
//If the chart-specific future record exists in the sequence of records that conforms to the IVAXIS rule,
//then a corresponding StartBlock record with iObjectKind equal to 0x0004 and iObjectInstance1 equal to
//0x0000 MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7,
//or 8, then this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_IVAXIS))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Axis, 0, 0);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//If the chart-specific future record exists in the sequence of records that conforms to the SERIESAXIS rule,
//then a corresponding StartBlock record with iObjectKind equal to 0x0004 and iObjectInstance1 equal to 0x0002
//MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, or 8, then
//this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_SERIESAXIS))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Axis, 0, 2);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//If the chart-specific future record exists in the sequence of records that conforms to the DVAXIS rule, and
//wType of the Axis record in the sequence of records that conforms to the DVAXIS rule is equal to 0, then a
//corresponding StartBlock record with iObjectKind equal to 0x0004 and iObjectInstance1 equal to 0x0001 MUST
//be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, or 8, then this
//StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_DVAXIS))
{
DVAxisAggregate dva = GetContainer <DVAxisAggregate>(RuleName_DVAXIS);
if (dva.Axis.AxisType == AxisRecord.AXIS_TYPE_CATEGORY_OR_X_AXIS)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Axis, 0, 1);
}
else
{
//If the chart-specific future record exists in the sequence of records that conforms to the DVAXIS rule, and
//wType of the Axis record in the sequence of records that conforms to the DVAXIS rule is equal to 1, then a
//corresponding StartBlock record with iObjectKind equal to 0x0004 and iObjectInstance1 equal to 0x0003 MUST
//be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, or 8, then this
//StartBlock record MUST be written immediately after those records.
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Axis, 0, 3);
}
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
}
//10
//If the chart-specific future record exists in the sequence of records that conforms to the DROPBAR rule, and
//there does not exist a StartBlock record with iObjectKind equal to 0x000F without a matching EndBlock record,
//then a corresponding StartBlock record with iObjectKind equal to 0x000F and iObjectInstance1 equal to one less
//than the number of DropBar records written prior to the chart-specific future record in the current Chart Group
//MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, 8, or 9, then
//this StartBlock record MUST be written immediately after those records.
if (IsInRule(RuleName_DROPBAR) && !blocks.Contains(ObjectKind.DropBarRecord))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.DropBarRecord);
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//11
//If the chart-specific future record is in a legend and there does not exist a StartBlock record with iObjectKind
//equal to 0x0009 without a matching EndBlock record, then:
if (IsInRule(RuleName_LD) && !blocks.Contains(ObjectKind.Legend))
{
if (IsInRule(RuleName_CRT))
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Legend, 1);
//If the chart-specific future record is in a chart group, then a corresponding StartBlock record with iObjectKind
//equal to 0x0009 and iObjectContext equal to 0x0001 MUST be written. If any StartBlock records are written because
//of rule number 2, 3, 4, 5, 6, 7, 8, 9, or 10, then this StartBlock record MUST be written immediately after those
//records.
}
else
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Legend, 0);
//If the chart-specific future record is not in a chart group, then a corresponding StartBlock record with iObjectKind
//equal to 0x0009 and iObjectContext equal to 0x0000 MUST be written. If any StartBlock records are written because
//of rule number 2, 3, 4, 5, 6, 7, 8, 9, or 10, then this StartBlock record MUST be written immediately after those
//records.
}
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//12
//If the chart-specific future record is in an attached label, and there does not exist a StartBlock record with iObjectKind
//equal to 0x0002 without a matching EndBlock record, then:
if (IsInRule(RuleName_ATTACHEDLABEL) && !blocks.Contains(ObjectKind.AttachedLabelRecord))
{
if (IsInRule(RuleName_DFTTEXT))
{
//If the chart-specific future record exists in the sequence of records that conforms to the DFTTEXT rule of a
//chart group, and the id field of the DefaultText record in the sequence of records that conforms to the DFTTEXT
//rule is greater than or equal to 0x0002, then a corresponding StartBlock record with iObjectKind equal to 0x0002,
//iObjectContext equal to 0x0002, and iObjectInstance1 equal to 0xFFFF MUST be written. If any StartBlock records
//are written because of rule number 2, 3, 4, 5, 6, 7, 8, 9, 10, or 11, then this StartBlock record MUST be written
//immediately after those records. Else,
DFTTextAggregate dft = GetContainer <DFTTextAggregate>(RuleName_DFTTEXT);
if (IsInRule(RuleName_CRT) && (int)dft.DefaultText.FormatType >= 2)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 2,
unchecked ((short)0xFFFF));
}
//If the chart-specific future record exists in the sequence of records that conforms to the DFTTEXT rule of a
//chart group, then a corresponding StartBlock record with iObjectKind equal to 0x0002, iObjectContext equal to
//0x0002, and iObjectInstance1 equal to the id field of the DefaultText record in the sequence of records that
//conforms to the DFTTEXT rule MUST be written. If any StartBlock records are written because of rule number
//2, 3, 4, 5, 6, 7, 8, 9, 10, or 11, then this StartBlock record MUST be written immediately after those records. Else,
else
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 2,
(short)dft.DefaultText.FormatType);
}
}
else
{
AttachedLabelAggregate ala = GetContainer <AttachedLabelAggregate>(RuleName_ATTACHEDLABEL);
//If the wLinkVar1 of the ObjectLink record of the attached label is equal to 0x0003, then a corresponding
//StartBlock record with iObjectKind equal to 0x0002, iObjectContext equal to 0x0004 and iObjectInstance1
//equal to 0x0000 MUST be written. If any StartBlock records are written because of rules number 2, 3, 4,
//5, 6, 7, 8, 9, 10 or 11, then this StartBlock record MUST be written immediately after those records. Else,
if (ala.ObjectLink.Link1 == 3)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 4, 0);
}
//If the wLinkVar1 of the ObjectLink record of the attached label is equal to 0x0002, then a corresponding
//StartBlock record with iObjectKind equal to 0x0002, iObjectContext equal to 0x0004 and iObjectInstance1
//equal to 0x0001 MUST be written. If any StartBlock records are written because of rules number 2, 3, 4,
//5, 6, 7, 8, 9, 10 or 11, then this StartBlock record MUST be written immediately after those records. Else,
else if (ala.ObjectLink.Link1 == 2)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 4, 1);
}
//If the wLinkVar1 of the ObjectLink record of the attached label is equal to 0x0007, then a corresponding
//StartBlock record with iObjectKind equal to 0x0002, iObjectContext equal to 0x0004, and iObjectInstance1
//equal to 0x0002 MUST be written. If any StartBlock records are written because of rule number 2, 3, 4, 5,
//6, 7, 8, 9, 10, or 11, then this StartBlock record MUST be written immediately after those records. Else,
else if (ala.ObjectLink.Link1 == 7)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 4, 2);
}
else if (ala.IsFirst)
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 0);
}
//If the chart-specific future record is in the first attached label of a chart sheet, then a corresponding
//StartBlock record with iObjectKind equal to 0x0002 and iObjectContext equal to 0x0000 MUST be written. If
//any StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, 8, 9, 10, or 11, then this
//StartBlock record MUST be written immediately after those records. Else,
else
{
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.AttachedLabelRecord, 5,
ala.ObjectLink.Link1, ala.ObjectLink.Link2);
}
//If the chart-specific future record is not in the first attached label of a chart sheet, then a corresponding
//StartBlock record with iObjectKind equal to 0x0002 and iObjectContext equal to 0x0005, iObjectInstance1
//equal to wLinkVar1 of the ObjectLink record of the attached label and iObjectInstance2 equal to wLinkVar2
//of the ObjectLink record of the attached label MUST be written. If any StartBlock records are written
//because of rule number 2, 3, 4, 5, 6, 7, 8, 9, 10, or 11, then this StartBlock record MUST be written
//immediately after those records.
}
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
//13
//If the chart-specific future record exists in the sequence of records that conforms to the FRAME rule, and there
//does not exist a StartBlock record with iObjectKind equal to 0x0007 without a matching EndBlock record, then:
if (IsInRule(RuleName_FRAME) && !blocks.Contains(ObjectKind.Frame))
{
if (IsInRule(RuleName_ATTACHEDLABEL) || IsInRule(RuleName_LD))
{
//If the chart-specific future record is in an attached label or legend, then a corresponding StartBlock record
//with iObjectKind equal to 0x0007, iObjectContext equal to 0x0000, and iObjectInstance1 equal to 0x0000 MUST be
//written. If any StartBlock records are written because of rules number 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12,
//then this StartBlock record MUST be written immediately after those records. Else,
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Frame, 0, 0);
}
else if (IsInRule(RuleName_AXES))
{
//If the chart-specific future record exists in the sequence of records that conforms to the AXES rule, then a
//corresponding StartBlock record with iObjectKind equal to 0x0007, iObjectContext equal to 0x0001, and
//iObjectInstance1 equal to 0x0000 MUST be written. If any StartBlock records are written because of rule number
//2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12, then this StartBlock record MUST be written immediately after
//those records. Else,
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Frame, 1, 0);
}
else if (IsInRule(RuleName_CHARTSHEET))
{
//If the chart-specific future record is in a Sheet, then a corresponding StartBlock record with iObjectKind
//equal to 0x0007, iObjectContext equal to 0x0002, and iObjectInstance1 equal to 0x0000 MUST be written. If any
//StartBlock records are written because of rule number 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12, then this StartBlock
//record MUST be written immediately after those records.
sbr = StartBlockRecord.CreateStartBlock(ObjectKind.Frame, 2, 0);
}
blocks.Push(sbr);
rv.VisitRecord(sbr);
}
}