コード例 #1
0
        public override void Tessellate()
        {
            // Create vertices.
            Vector3D normal = new Vector3D(0, 1, 0);
            for (int z = 0; z < _length; ++z)
                for (int x = 0; x < _width; ++x)
                    AddVertex(new Point3D(x, 0, (_length - 1) - z), normal); // Invert z so that winding order is correct.

            // Create indices.
            for (int z = 0; z < _length - 1; ++z)
                for (int x = 0; x < _width; ++x)
                {
                    // Create vertex for degenerate triangle.
                    if (x == 0 && z > 0)
                        AddIndex(((z + 0) * _width) + x);

                    AddIndex(((z + 0) * _width) + x);
                    AddIndex(((z + 1) * _width) + x);

                    // Create vertex for degenerate triangle.
                    if (x == _width - 1 && z < _length - 2)
                        AddIndex(((z + 1) * _width) + x);
                }

            // It's easiest to define the plane in terms of a triangle strip,
            // and then convert it.
            Int32Collection newIndices = MeshUtility.ConvertTriangleStripToTriangleList(Indices);
            Indices.Clear();
            Indices.AddRange(newIndices);
        }
コード例 #2
0
        /// <summary>
        /// Helper method creates a triangle fan to close the ends of the cylinder.
        /// </summary>
        private void CreateCap(Vector3D normal)
        {
            // Create cap indices.
            for (int i = 0; i < TessellationLevel - 2; i++)
            {
                if (normal.Y > 0)
                {
                    AddIndex(CurrentVertex);
                    AddIndex(CurrentVertex + (i + 1) % TessellationLevel);
                    AddIndex(CurrentVertex + (i + 2) % TessellationLevel);
                }
                else
                {
                    AddIndex(CurrentVertex);
                    AddIndex(CurrentVertex + (i + 2) % TessellationLevel);
                    AddIndex(CurrentVertex + (i + 1) % TessellationLevel);
                }
            }

            // Create cap vertices.
            for (int i = 0; i < TessellationLevel; i++)
            {
                Point3D position = (Point3D)GetCircleVector(i) * _radius + normal * _height;
                AddVertex(position, normal);
            }
        }
コード例 #3
0
ファイル: Quaternion.cs プロジェクト: tgjones/nexus
 public Quaternion(Vector3D axis, float angle)
 {
     axis.Normalize();
     float num2 = angle * 0.5f;
     float num = MathUtility.Sin(num2);
     float num3 = MathUtility.Cos(num2);
     X = axis.X * num;
     Y = axis.Y * num;
     Z = axis.Z * num;
     W = num3;
 }
コード例 #4
0
ファイル: MeshUtility.cs プロジェクト: bondehagen/meshellator
 private static void AccumulateTriangleNormals(Int32Collection indices, Point3DCollection positions, Vector3D[] vertexNormals)
 {
     for (int i = 0; i < indices.Count; i += 3)
     {
         Point3D vector4 = positions[indices[i]];
         Point3D vector = positions[indices[i + 1]];
         Point3D vector3 = positions[indices[i + 2]];
         Vector3D vector2 = Vector3D.Normalize(Vector3D.Cross(vector3 - vector, vector - vector4));
         for (int j = 0; j < 3; j++)
             vertexNormals[indices[i + j]] += vector2;
     }
 }
コード例 #5
0
ファイル: MeshUtility.cs プロジェクト: bondehagen/meshellator
        public static void CalculateNormals(Mesh mesh, bool overwriteExistingNormals)
        {
            if (mesh == null)
                throw new ArgumentNullException("mesh");

            if (overwriteExistingNormals || !mesh.Normals.Any())
            {
                Vector3D[] vertexNormals = new Vector3D[mesh.Positions.Count];
                AccumulateTriangleNormals(mesh.Indices, mesh.Positions, vertexNormals);
                for (int i = 0; i < vertexNormals.Length; i++)
                    vertexNormals[i] = Vector3D.Normalize(vertexNormals[i]);
                mesh.Normals.AddRange(vertexNormals);
            }
        }
コード例 #6
0
        public override void Tessellate()
        {
            // First we loop around the main ring of the torus.
            for (int i = 0; i < TessellationLevel; i++)
            {
                float outerAngle = i * MathUtility.TWO_PI / TessellationLevel;

                // Create a transform matrix that will align geometry to
                // slice perpendicularly though the current ring position.
                Matrix3D transform = Matrix3D.CreateTranslation(_radius, 0, 0) *
                                                     Matrix3D.CreateRotationY(outerAngle);

                // Now we loop along the other axis, around the side of the tube.
                for (int j = 0; j < TessellationLevel; j++)
                {
                    float innerAngle = j * MathUtility.TWO_PI / TessellationLevel;

                    float dx = (float)Math.Cos(innerAngle);
                    float dy = (float)Math.Sin(innerAngle);

                    // Create a vertex.
                    Vector3D normal = new Vector3D(dx, dy, 0);
                    Point3D position = (Point3D)(normal * _thickness / 2);

                    position = Point3D.Transform(position, transform);
                    normal = Vector3D.TransformNormal(normal, transform);

                    AddVertex(position, normal);

                    // And create indices for two triangles.
                    int nextI = (i + 1) % TessellationLevel;
                    int nextJ = (j + 1) % TessellationLevel;

                    AddIndex(i * TessellationLevel + j);
                    AddIndex(i * TessellationLevel + nextJ);
                    AddIndex(nextI * TessellationLevel + j);

                    AddIndex(i * TessellationLevel + nextJ);
                    AddIndex(nextI * TessellationLevel + nextJ);
                    AddIndex(nextI * TessellationLevel + j);
                }
            }
        }
コード例 #7
0
        public override void Tessellate()
        {
            // A cube has six faces, each one pointing in a different direction.
            Vector3D[] normals =
                {
                    new Vector3D(0, 0, 1),
                    new Vector3D(0, 0, -1),
                    new Vector3D(1, 0, 0),
                    new Vector3D(-1, 0, 0),
                    new Vector3D(0, 1, 0),
                    new Vector3D(0, -1, 0),
                };

            // Create each face in turn.
            foreach (Vector3D normal in normals)
            {
                // Get two vectors perpendicular to the face normal and to each other.
                Vector3D side1 = new Vector3D(normal.Y, normal.Z, normal.X);
                Vector3D side2 = Vector3D.Cross(normal, side1);

                // Six indices (two triangles) per face.
                AddIndex(CurrentVertex + 0);
                AddIndex(CurrentVertex + 1);
                AddIndex(CurrentVertex + 2);

                AddIndex(CurrentVertex + 0);
                AddIndex(CurrentVertex + 2);
                AddIndex(CurrentVertex + 3);

                // Four vertices per face.
                AddVertex((Point3D)((normal - side1 - side2) * _size / 2), normal);
                AddVertex((Point3D)((normal - side1 + side2) * _size / 2), normal);
                AddVertex((Point3D)((normal + side1 + side2) * _size / 2), normal);
                AddVertex((Point3D)((normal + side1 - side2) * _size / 2), normal);
            }
        }
コード例 #8
0
ファイル: Trackball.cs プロジェクト: bondehagen/meshellator
        private void OnMouseDown(object sender, MouseEventArgs e)
        {
            IoC.Get<IOutput>().Append("Mouse down");

            Mouse.Capture(EventSource, CaptureMode.Element);
            _previousPosition2D = e.GetPosition(EventSource);
            _initialPosition3D = ProjectToTrackball(
                    EventSource.ActualWidth,
                    EventSource.ActualHeight,
                    _previousPosition2D);
            _currentOrientation = _persistentOrientation;

            _mouseDown = true;
        }
コード例 #9
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
        public static Vector3D TransformNormal(Vector3D normal, Matrix3D matrix)
        {
            float num3 = ((normal.X * matrix.M11) + (normal.Y * matrix.M21)) + (normal.Z * matrix.M31);
            float num2 = ((normal.X * matrix.M12) + (normal.Y * matrix.M22)) + (normal.Z * matrix.M32);
            float num = ((normal.X * matrix.M13) + (normal.Y * matrix.M23)) + (normal.Z * matrix.M33);

            return new Vector3D(num3, num2, num);
        }
コード例 #10
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Reflect(Vector3D vector, Vector3D normal)
 {
     Vector3D vector2;
     float num = ((vector.X * normal.X) + (vector.Y * normal.Y)) + (vector.Z * normal.Z);
     vector2.X = vector.X - ((2f * num) * normal.X);
     vector2.Y = vector.Y - ((2f * num) * normal.Y);
     vector2.Z = vector.Z - ((2f * num) * normal.Z);
     return vector2;
 }
コード例 #11
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Normalize(Vector3D v)
 {
     return v / v.Length();
 }
コード例 #12
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float AbsDot(Vector3D v1, Normal3D n2)
 {
     return System.Math.Abs(Dot(v1, n2));
 }
コード例 #13
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float AbsDot(Vector3D v1, Vector3D v2)
 {
     return System.Math.Abs(Dot(v1, v2));
 }
コード例 #14
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Abs(Vector3D vector)
 {
     return new Vector3D(Math.Abs(vector.X), Math.Abs(vector.Y), Math.Abs(vector.Z));
 }
コード例 #15
0
ファイル: Particle.cs プロジェクト: modulexcite/jolt
		private void ClearAccumulator()
		{
			_forceAccumulator = Vector3D.Zero;
		}
コード例 #16
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float Dot(Vector3D v1, Normal3D n2)
 {
     return (v1.X * n2.X) + (v1.Y * n2.Y) + (v1.Z * n2.Z);
 }
コード例 #17
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float Dot(Normal3D n1, Vector3D v2)
 {
     return (n1.X * v2.X) + (n1.Y * v2.Y) + (n1.Z * v2.Z);
 }
コード例 #18
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float AbsDot(Normal3D n1, Vector3D v2)
 {
     return System.Math.Abs(Dot(n1, v2));
 }
コード例 #19
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Parse(string source)
 {
     IFormatProvider cultureInfo = CultureInfo.InvariantCulture;
     TokenizerHelper helper = new TokenizerHelper(source, cultureInfo);
     string str = helper.NextTokenRequired();
     Vector3D vectord = new Vector3D(Convert.ToSingle(str, cultureInfo), Convert.ToSingle(helper.NextTokenRequired(), cultureInfo), Convert.ToSingle(helper.NextTokenRequired(), cultureInfo));
     helper.LastTokenRequired();
     return vectord;
 }
コード例 #20
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
        public static float AngleBetween(Vector3D vector1, Vector3D vector2)
        {
            vector1.Normalize();
            vector2.Normalize();

            if (Dot(vector1, vector2) < 0.0f)
            {
                Vector3D vectord2 = -vector1 - vector2;
                return MathUtility.PI - (2.0f * MathUtility.Asin(vectord2.Length() / 2.0f));
            }

            Vector3D vectord = vector1 - vector2;
            return 2.0f * MathUtility.Asin(vectord.Length() / 2.0f);
        }
コード例 #21
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Transform(Vector3D position, Matrix3D matrix)
 {
     Vector3D vector;
     float num3 = (((position.X * matrix.M11) + (position.Y * matrix.M21)) + (position.Z * matrix.M31)) + matrix.M41;
     float num2 = (((position.X * matrix.M12) + (position.Y * matrix.M22)) + (position.Z * matrix.M32)) + matrix.M42;
     float num = (((position.X * matrix.M13) + (position.Y * matrix.M23)) + (position.Z * matrix.M33)) + matrix.M43;
     vector.X = num3;
     vector.Y = num2;
     vector.Z = num;
     return vector;
 }
コード例 #22
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static void CoordinateSystem(Vector3D v1, out Vector3D v2, out Vector3D v3)
 {
     if (System.Math.Abs(v1.Y) > System.Math.Abs(v1.Y))
     {
         float invLen = 1.0f / MathUtility.Sqrt(v1.X * v1.X + v1.Z * v1.Z);
         v2 = new Vector3D(-v1.Z * invLen, 0.0f, v1.X * invLen);
     }
     else
     {
         float invLen = 1.0f / MathUtility.Sqrt(v1.Y * v1.Y + v1.Z * v1.Z);
         v2 = new Vector3D(0.0f, v1.Z * invLen, -v1.Y * invLen);
     }
     v3 = Vector3D.Cross(v1, v2);
 }
コード例 #23
0
        /// <summary>
        /// Computes the tangent of a cubic bezier curve at the specified time,
        /// when given four Point3D control points. This is used for calculating
        /// normals (by crossing the horizontal and vertical tangent vectors).
        /// </summary>
        private static Vector3D BezierTangent(Point3D p1, Point3D p2,
			Point3D p3, Point3D p4, float t)
        {
            Vector3D result = new Vector3D();

            result.X = BezierTangent(p1.X, p2.X, p3.X, p4.X, t);
            result.Y = BezierTangent(p1.Y, p2.Y, p3.Y, p4.Y, t);
            result.Z = BezierTangent(p1.Z, p2.Z, p3.Z, p4.Z, t);

            result.Normalize();

            return result;
        }
コード例 #24
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static void Cross(ref Vector3D v1, ref Vector3D v2, out Vector3D result)
 {
     result = new Vector3D((v1.Y * v2.Z) - (v1.Z * v2.Y),
         (v1.Z * v2.X) - (v1.X * v2.Z),
         (v1.X * v2.Y) - (v1.Y * v2.X));
 }
コード例 #25
0
        public override void Tessellate()
        {
            int verticalSegments = TessellationLevel;
            int horizontalSegments = TessellationLevel * 2;

            // Start with a single vertex at the bottom of the sphere.
            AddVertex((Point3D)(Vector3D.Down * _radius), Vector3D.Down);

            // Create rings of vertices at progressively higher latitudes.
            for (int i = 0; i < verticalSegments - 1; i++)
            {
                float latitude = ((i + 1) * MathUtility.PI /
                                                                        verticalSegments) - MathUtility.PI_OVER_2;

                float dy = MathUtility.Sin(latitude);
                float dxz = MathUtility.Cos(latitude);

                // Create a single ring of vertices at this latitude.
                for (int j = 0; j < horizontalSegments; j++)
                {
                    float longitude = j * MathUtility.TWO_PI / horizontalSegments;

                    float dx = (float)Math.Cos(longitude) * dxz;
                    float dz = (float)Math.Sin(longitude) * dxz;

                    Vector3D normal = new Vector3D(dx, dy, dz);

                    AddVertex((Point3D)(normal * _radius), normal);
                }
            }

            // Finish with a single vertex at the top of the sphere.
            AddVertex((Point3D)(Vector3D.Up * _radius), Vector3D.Up);

            // Create a fan connecting the bottom vertex to the bottom latitude ring.
            for (int i = 0; i < horizontalSegments; i++)
            {
                AddIndex(0);
                AddIndex(1 + (i + 1) % horizontalSegments);
                AddIndex(1 + i);
            }

            // Fill the sphere body with triangles joining each pair of latitude rings.
            for (int i = 0; i < verticalSegments - 2; i++)
            {
                for (int j = 0; j < horizontalSegments; j++)
                {
                    int nextI = i + 1;
                    int nextJ = (j + 1) % horizontalSegments;

                    AddIndex(1 + i * horizontalSegments + j);
                    AddIndex(1 + i * horizontalSegments + nextJ);
                    AddIndex(1 + nextI * horizontalSegments + j);

                    AddIndex(1 + i * horizontalSegments + nextJ);
                    AddIndex(1 + nextI * horizontalSegments + nextJ);
                    AddIndex(1 + nextI * horizontalSegments + j);
                }
            }

            // Create a fan connecting the top vertex to the top latitude ring.
            for (int i = 0; i < horizontalSegments; i++)
            {
                AddIndex(CurrentVertex - 1);
                AddIndex(CurrentVertex - 2 - (i + 1) % horizontalSegments);
                AddIndex(CurrentVertex - 2 - i);
            }
        }
コード例 #26
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static Vector3D Cross(Normal3D v1, Vector3D v2)
 {
     return new Vector3D((v1.Y * v2.Z) - (v1.Z * v2.Y),
         (v1.Z * v2.X) - (v1.X * v2.Z),
         (v1.X * v2.Y) - (v1.Y * v2.X));
 }
コード例 #27
0
 public VertexPositionColor(Point3D position, Vector3D color)
 {
     Position = position;
     Color = color;
 }
コード例 #28
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static float Dot(Vector3D v1, Vector3D v2)
 {
     return (v1.X * v2.X) + (v1.Y * v2.Y) + (v1.Z * v2.Z);
 }
コード例 #29
0
ファイル: ParticleGravity.cs プロジェクト: modulexcite/jolt
		public ParticleGravity(Particle particle, Vector3D gravity)
			: base(particle)
		{
			_gravity = gravity;
		}
コード例 #30
0
ファイル: Vector3D.cs プロジェクト: tgjones/nexus
 public static void Dot(ref Vector3D v1, ref Vector3D v2, out float result)
 {
     result = (v1.X * v2.X) + (v1.Y * v2.Y) + (v1.Z * v2.Z);
 }