public static SessionBase Create(IOThread ioThread, bool connect,
SocketBase socket, Options options, Address addr)
{
SessionBase s;
switch (options.SocketType)
{
case ZmqSocketType.Req:
s = new Req.ReqSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Dealer:
s = new Dealer.DealerSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Rep:
s = new Rep.RepSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Router:
s = new Router.RouterSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Pub:
s = new Pub.PubSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Xpub:
s = new XPub.XPubSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Sub:
s = new Sub.SubSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Xsub:
s = new XSub.XSubSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Push:
s = new Push.PushSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Pull:
s = new Pull.PullSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Pair:
s = new Pair.PairSession(ioThread, connect, socket, options, addr);
break;
case ZmqSocketType.Stream:
s = new Stream.StreamSession(ioThread, connect, socket, options, addr);
break;
default:
throw new InvalidException("type=" + options.SocketType);
}
return(s);
}
public PgmListener(IOThread ioThread, SocketBase socket, Options options)
: base(ioThread, options)
{
m_socket = socket;
m_ioObject = new IOObject(ioThread);
}
public IOObject(IOThread ioThread)
{
if (ioThread != null)
{
Plug(ioThread);
}
}
public IOObject(IOThread ioThread)
{
if (ioThread != null)
{
Plug(ioThread);
}
}
// Returns the I/O thread that is the least busy at the moment.
// Affinity specifies which I/O threads are eligible (0 = all).
// Returns NULL if no I/O thread is available.
public IOThread ChooseIOThread(long affinity)
{
if (m_ioThreads.Count == 0)
{
return(null);
}
// Find the I/O thread with minimum load.
int minLoad = -1;
IOThread selectedIOThread = null;
for (int i = 0; i != m_ioThreads.Count; i++)
{
if (affinity == 0 || (affinity & (1L << i)) > 0)
{
int load = m_ioThreads[i].Load;
if (selectedIOThread == null || load < minLoad)
{
minLoad = load;
selectedIOThread = m_ioThreads[i];
}
}
}
return(selectedIOThread);
}
public PgmListener(IOThread ioThread, SocketBase socket, Options options)
: base(ioThread, options)
{
m_socket = socket;
m_ioObject = new IOObject(ioThread);
}
public IOObject([CanBeNull] IOThread ioThread)
{
if (ioThread != null)
{
Plug(ioThread);
}
}
public void Plug(IOThread ioThread,
SessionBase session)
{
Debug.Assert(!m_plugged);
m_plugged = true;
// Connect to session object.
Debug.Assert(m_session == null);
Debug.Assert(session != null);
m_session = session;
m_socket = m_session.Socket;
m_ioObject = new IOObject(null);
m_ioObject.SetHandler(this);
// Connect to I/O threads poller object.
m_ioObject.Plug(ioThread);
m_ioObject.AddFd(m_handle);
// Send the 'length' and 'flags' fields of the identity message.
// The 'length' field is encoded in the long format.
m_greetingOutputBuffer[m_outsize++] = ((byte)0xff);
m_greetingOutputBuffer.PutLong(m_options.Endian, (long)m_options.IdentitySize + 1, 1);
m_outsize += 8;
m_greetingOutputBuffer[m_outsize++] = ((byte)0x7f);
m_outpos = new ByteArraySegment(m_greetingOutputBuffer);
m_ioObject.SetPollin(m_handle);
m_ioObject.SetPollout(m_handle);
// Flush all the data that may have been already received downstream.
InEvent();
}
public SessionBase(IOThread ioThread, bool connect,
SocketBase socket, Options options, Address addr)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_connect = connect;
m_pipe = null;
m_incompleteIn = false;
m_pending = false;
m_engine = null;
m_socket = socket;
m_ioThread = ioThread;
m_hasLingerTimer = false;
m_identitySent = false;
m_identityReceived = false;
m_addr = addr;
if (options.RawSocket)
{
m_identitySent = true;
m_identityReceived = true;
}
m_terminatingPipes = new HashSet<Pipe>();
}
public ReqSession(IOThread ioThread, bool connect,
SocketBase socket, Options options,
Address addr)
: base(ioThread, connect, socket, options, addr)
{
m_state = State.Identity;
}
public SessionBase(IOThread ioThread, bool connect,
SocketBase socket, Options options, Address addr)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_connect = connect;
m_pipe = null;
m_incompleteIn = false;
m_pending = false;
m_engine = null;
m_socket = socket;
m_ioThread = ioThread;
m_hasLingerTimer = false;
m_identitySent = false;
m_identityReceived = false;
m_addr = addr;
if (options.RawSocket)
{
m_identitySent = true;
m_identityReceived = true;
}
m_terminatingPipes = new HashSet <Pipe>();
}
// When migrating an object from one I/O thread to another, first
// unplug it, then migrate it, then plug it to the new thread.
public void Plug(IOThread ioThread)
{
Debug.Assert(ioThread != null);
Debug.Assert(m_poller == null);
// Retrieve the poller from the thread we are running in.
m_poller = ioThread.GetPoller();
}
public TcpListener(IOThread ioThread, SocketBase socket, Options options) :
base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_address = new TcpAddress();
m_handle = null;
m_socket = socket;
}
// When migrating an object from one I/O thread to another, first
// unplug it, then migrate it, then plug it to the new thread.
public void Plug(IOThread ioThread)
{
Debug.Assert(ioThread != null);
Debug.Assert(m_poller == null);
// Retrieve the poller from the thread we are running in.
m_poller = ioThread.GetPoller ();
}
public TcpListener(IOThread ioThread, SocketBase socket, Options options)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_address = new TcpAddress();
m_handle = null;
m_socket = socket;
}
public void Unplug()
{
Debug.Assert(m_ioThread != null);
// Forget about old poller in preparation to be migrated
// to a different I/O thread.
m_ioThread = null;
m_handler = null;
}
/// <summary> Initializes a new instance of the <see cref="Own" /> class that is running within I/O thread. </summary>
/// <param name="ioThread">The I/O thread.</param>
/// <param name="options">The options.</param>
/// <remarks> Note that the owner is unspecified in the constructor. It'll be assigned later on using <see cref="SetOwner"/>
/// when the object is plugged in. </remarks>
protected Own(IOThread ioThread, Options options)
: base(ioThread)
{
m_options = options;
m_terminating = false;
m_processedSeqnum = 0;
m_owner = null;
m_termAcks = 0;
}
public void Plug(IOThread ioThread, SessionBase session)
{
m_encoder.SetMsgSource(session);
AddFd(m_socket);
SetPollout(m_socket);
// get the first message from the session because we don't want to send identities
session.PullMsg();
}
public PgmSender(IOThread ioThread, Options options, Address addr)
: base(ioThread)
{
m_options = options;
m_addr = addr;
m_encoder = null;
m_outBuffer = null;
m_outBufferSize = 0;
m_writeSize = 0;
m_encoder = new Encoder(0, m_options.Endian);
}
public PgmSender(IOThread ioThread, Options options, Address addr)
: base(ioThread)
{
m_options = options;
m_addr = addr;
m_encoder = null;
m_outBuffer = null;
m_outBufferSize = 0;
m_writeSize = 0;
m_encoder = new Encoder(0, m_options.Endian);
}
// The object is living within I/O thread.
public Own(IOThread ioThread, Options options)
: base(ioThread)
{
m_options = options;
m_terminating = false;
m_sentSeqnum = new AtomicLong(0);
m_processedSeqnum = 0;
m_owner = null;
m_termAcks = 0;
owned = new HashSet<Own>();
}
public void InEvent()
{
Socket fd;
try
{
fd = Accept();
Utils.TuneTcpSocket(fd);
Utils.TuneTcpKeepalives(fd, m_options.TcpKeepalive, m_options.TcpKeepaliveCnt, m_options.TcpKeepaliveIdle, m_options.TcpKeepaliveIntvl);
}
catch (NetMQException ex)
{
// If connection was reset by the peer in the meantime, just ignore it.
// TODO: Handle specific errors like ENFILE/EMFILE etc.
//ZError.exc (e);
m_socket.EventAcceptFailed(m_endpoint, ex.ErrorCode);
return;
}
// Create the engine object for this connection.
StreamEngine engine;
try
{
engine = new StreamEngine(fd, m_options, m_endpoint);
}
catch (SocketException ex)
{
//LOG.error("Failed to initialize StreamEngine", e.getCause());
ErrorCode errorCode = ErrorHelper.SocketErrorToErrorCode(ex.SocketErrorCode);
m_socket.EventAcceptFailed(m_endpoint, errorCode);
throw NetMQException.Create(errorCode);
}
// Choose I/O thread to run connecter in. Given that we are already
// running in an I/O thread, there must be at least one available.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
// Create and launch a session object.
SessionBase session = SessionBase.Create(ioThread, false, m_socket,
m_options, new Address(m_handle.LocalEndPoint));
session.IncSeqnum();
LaunchChild(session);
SendAttach(session, engine, false);
m_socket.EventAccepted(m_endpoint, fd);
}
public void Plug(IOThread ioThread, SessionBase session)
{
m_session = session;
m_socket = session.Socket;
m_ioObject = new IOObject(null);
m_ioObject.SetHandler(this);
m_ioObject.Plug(ioThread);
m_ioObject.AddFd(m_handle);
m_ioObject.SetPollin(m_handle);
DropSubscriptions();
// push message to the session because there is no identity message with pgm
session.PushMsg(new Msg());
}
public TcpConnecter(IOThread ioThread,
SessionBase session, Options options,
Address addr, bool delayedStart)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_addr = addr;
m_handle = null;
m_handleValid = false;
m_delayedStart = delayedStart;
m_timerStarted = false;
m_session = session;
m_currentReconnectIvl = m_options.ReconnectIvl;
Debug.Assert(m_addr != null);
m_endpoint = m_addr.ToString();
m_socket = session.Socket;
}
public static SessionBase Create([NotNull] IOThread ioThread, bool connect, [NotNull] SocketBase socket, [NotNull] Options options, [NotNull] Address addr)
{
switch (options.SocketType)
{
case ZmqSocketType.Req:
return(new Req.ReqSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Dealer:
return(new Dealer.DealerSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Rep:
return(new Rep.RepSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Router:
return(new Router.RouterSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Pub:
return(new Pub.PubSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Xpub:
return(new XPub.XPubSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Sub:
return(new Sub.SubSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Xsub:
return(new XSub.XSubSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Push:
return(new Push.PushSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Pull:
return(new Pull.PullSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Pair:
return(new Pair.PairSession(ioThread, connect, socket, options, addr));
case ZmqSocketType.Stream:
return(new Stream.StreamSession(ioThread, connect, socket, options, addr));
default:
throw new InvalidException("SessionBase.Create called with invalid SocketType of " + options.SocketType);
}
}
public TcpConnecter(IOThread ioThread,
SessionBase session, Options options,
Address addr, bool delayedStart)
: base(ioThread, options)
{
m_ioObject = new IOObject(ioThread);
m_addr = addr;
m_handle = null;
m_s = null;
m_handleValid = false;
m_delayedStart = delayedStart;
m_timerStarted = false;
m_session = session;
m_currentReconnectIvl = m_options.ReconnectIvl;
Debug.Assert(m_addr != null);
m_endpoint = m_addr.ToString();
m_socket = session.Socket;
}
private void StartConnecting(bool wait)
{
Debug.Assert(m_connect);
// Choose I/O thread to run connecter in. Given that we are already
// running in an I/O thread, there must be at least one available.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
Debug.Assert(ioThread != null);
// Create the connecter object.
if (m_addr.Protocol.Equals(Address.TcpProtocol))
{
TcpConnecter connecter = new TcpConnecter(
ioThread, this, m_options, m_addr, wait);
//alloc_Debug.Assert(connecter);
LaunchChild(connecter);
return;
}
if (m_addr.Protocol.Equals(Address.IpcProtocol))
{
IpcConnecter connecter = new IpcConnecter(
ioThread, this, m_options, m_addr, wait);
//alloc_Debug.Assert(connecter);
LaunchChild(connecter);
return;
}
if (m_addr.Protocol.Equals(Address.PgmProtocol) || m_addr.Protocol.Equals(Address.EpgmProtocol))
{
PgmSender pgmSender = new PgmSender(m_ioThread, m_options, m_addr);
pgmSender.Init(m_addr.Resolved as PgmAddress);
SendAttach(this, pgmSender);
return;
}
Debug.Assert(false);
}
public void Plug(IOThread ioThread, SessionBase session)
{
m_encoder.SetMsgSource(session);
AddFd(m_socket);
SetPollout(m_socket);
// get the first message from the session because we don't want to send identities
Msg msg = new Msg();
msg.InitEmpty();
bool ok = session.PullMsg(ref msg);
if (ok)
{
msg.Close();
}
}
public void InEvent()
{
Socket fd;
try
{
fd = Accept();
}
catch (SocketException ex)
{
m_socket.EventAcceptFailed(m_address.ToString(), ErrorHelper.SocketErrorToErrorCode(ex.SocketErrorCode));
return;
}
catch (NetMQException ex)
{
// If connection was reset by the peer in the meantime, just ignore it.
// TODO: Handle specific errors like ENFILE/EMFILE etc.
//ZError.exc (e);
m_socket.EventAcceptFailed(m_address.ToString(), ex.ErrorCode);
return;
}
PgmSocket pgmSocket = new PgmSocket(m_options, PgmSocketType.Receiver, m_address);
pgmSocket.Init(fd);
PgmSession pgmSession = new PgmSession(pgmSocket, m_options);
IOThread ioThread = ChooseIOThread(m_options.Affinity);
SessionBase session = SessionBase.Create(ioThread, false, m_socket,
m_options, new Address(m_handle.LocalEndPoint));
session.IncSeqnum();
LaunchChild(session);
SendAttach(session, pgmSession, false);
m_socket.EventAccepted(m_address.ToString(), fd);
}
public void Connect([NotNull] string addr)
{
CheckContextTerminated();
// Process pending commands, if any.
ProcessCommands(0, false);
string address;
string protocol;
DecodeAddress(addr, out address, out protocol);
CheckProtocol(protocol);
if (protocol.Equals(Address.InProcProtocol))
{
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
Ctx.Endpoint peer = FindEndpoint(addr);
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm;
int rcvhwm;
if (m_options.SendHighWatermark == 0 || peer.Options.ReceiveHighWatermark == 0)
{
sndhwm = 0;
}
else
{
sndhwm = m_options.SendHighWatermark + peer.Options.ReceiveHighWatermark;
}
if (m_options.ReceiveHighWatermark == 0 || peer.Options.SendHighWatermark == 0)
{
rcvhwm = 0;
}
else
{
rcvhwm = m_options.ReceiveHighWatermark + peer.Options.SendHighWatermark;
}
// Create a bi-directional pipe to connect the peers.
ZObject[] parents = { this, peer.Socket };
int[] highWaterMarks = { sndhwm, rcvhwm };
bool[] delays = { m_options.DelayOnDisconnect, m_options.DelayOnClose };
Pipe[] pipes = Pipe.PipePair(parents, highWaterMarks, delays);
// Attach local end of the pipe to this socket object.
AttachPipe(pipes[0]);
// If required, send the identity of the peer to the local socket.
if (peer.Options.RecvIdentity)
{
var id = new Msg();
id.InitPool(peer.Options.IdentitySize);
id.Put(peer.Options.Identity, 0, peer.Options.IdentitySize);
id.SetFlags(MsgFlags.Identity);
bool written = pipes[0].Write(ref id);
Debug.Assert(written);
pipes[0].Flush();
}
// If required, send the identity of the local socket to the peer.
if (m_options.RecvIdentity)
{
var id = new Msg();
id.InitPool(m_options.IdentitySize);
id.Put(m_options.Identity, 0, m_options.IdentitySize);
id.SetFlags(MsgFlags.Identity);
bool written = pipes[1].Write(ref id);
Debug.Assert(written);
pipes[1].Flush();
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
SendBind(peer.Socket, pipes[1], false);
// Save last endpoint URI
m_options.LastEndpoint = addr;
// remember inproc connections for disconnect
m_inprocs.Add(addr, pipes[0]);
return;
}
// Choose the I/O thread to run the session in.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
if (ioThread == null)
{
throw NetMQException.Create("Empty IO Thread", ErrorCode.EmptyThread);
}
var paddr = new Address(protocol, address);
// Resolve address (if needed by the protocol)
if (protocol.Equals(Address.TcpProtocol))
{
paddr.Resolved = (new TcpAddress());
paddr.Resolved.Resolve(
address, m_options.IPv4Only);
}
else if (protocol.Equals(Address.IpcProtocol))
{
paddr.Resolved = (new IpcAddress());
paddr.Resolved.Resolve(address, true);
}
else if (protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol))
{
if (m_options.SocketType == ZmqSocketType.Sub || m_options.SocketType == ZmqSocketType.Xsub)
{
Bind(addr);
return;
}
paddr.Resolved = new PgmAddress();
paddr.Resolved.Resolve(address, m_options.IPv4Only);
}
// Create session.
SessionBase session = SessionBase.Create(ioThread, true, this, m_options, paddr);
Debug.Assert(session != null);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe.
bool icanhasall = protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol);
if (!m_options.DelayAttachOnConnect || icanhasall)
{
// Create a bi-directional pipe.
ZObject[] parents = { this, session };
int[] hwms = { m_options.SendHighWatermark, m_options.ReceiveHighWatermark };
bool[] delays = { m_options.DelayOnDisconnect, m_options.DelayOnClose };
Pipe[] pipes = Pipe.PipePair(parents, hwms, delays);
// Attach local end of the pipe to the socket object.
AttachPipe(pipes[0], icanhasall);
// Attach remote end of the pipe to the session object later on.
session.AttachPipe(pipes[1]);
}
// Save last endpoint URI
m_options.LastEndpoint = paddr.ToString();
AddEndpoint(addr, session);
}
public void Bind(String addr)
{
CheckContextTerminated();
// Process pending commands, if any.
ProcessCommands(0, false);
string protocol;
string address;
DecodeAddress(addr, out address, out protocol);
CheckProtocol(protocol);
if (protocol.Equals(Address.InProcProtocol))
{
Ctx.Endpoint endpoint = new Ctx.Endpoint(this, m_options);
bool addressRegistered = RegisterEndpoint(addr, endpoint);
if (!addressRegistered)
{
throw new AddressAlreadyInUseException("Cannot bind address, address already in use");
}
// Save last endpoint URI
m_options.LastEndpoint = addr;
return;
}
if ((protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol)) && (
m_options.SocketType == ZmqSocketType.Pub || m_options.SocketType == ZmqSocketType.Xpub))
{
// For convenience's sake, bind can be used interchageable with
// connect for PGM and EPGM transports.
Connect(addr);
return;
}
// Remaining trasnports require to be run in an I/O thread, so at this
// point we'll choose one.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
if (ioThread == null)
{
throw NetMQException.Create(ErrorCode.EmptyThread);
}
if (protocol.Equals(Address.TcpProtocol))
{
TcpListener listener = new TcpListener(
ioThread, this, m_options);
try
{
listener.SetAddress(address);
m_port = listener.Port;
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol))
{
PgmListener listener = new PgmListener(ioThread, this, m_options);
try
{
listener.Init(address);
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
m_options.LastEndpoint = addr;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals(Address.IpcProtocol))
{
IpcListener listener = new IpcListener(
ioThread, this, m_options);
try
{
listener.SetAddress(address);
m_port = listener.Port;
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
Debug.Assert(false);
throw new FaultException();
}
/// <summary>
/// "Un-Plug" this IOObject from it's current IOThread, and set it's handler to null.
/// </summary>
/// <remarks>
/// When migrating an object from one I/O thread to another, first
/// unplug it, then migrate it, then plug it to the new thread.
/// </remarks>
public void Unplug()
{
Debug.Assert(m_ioThread != null);
// Forget about old poller in preparation to be migrated
// to a different I/O thread.
m_ioThread = null;
m_handler = null;
}
/// <summary>
/// "Plug in" this IOObject to the given IOThread, - ie associate this with the specified IOThread.
/// </summary>
/// <param name="ioThread">the IOThread for this object to live in</param>
/// <remarks>
/// When migrating an object from one I/O thread to another, first
/// unplug it, then migrate it, then plug it to the new thread.
/// </remarks>
public void Plug([NotNull] IOThread ioThread)
{
Debug.Assert(ioThread != null);
m_ioThread = ioThread;
}
public ReqSession(IOThread ioThread, bool connect,
SocketBase socket, Options options,
Address addr)
: base(ioThread, connect, socket, options, addr)
{
m_state = State.Identity;
}
public void Plug(IOThread ioThread, SessionBase session)
{
m_session = session;
m_socket = session.Socket;
m_ioObject = new IOObject(null);
m_ioObject.SetHandler(this);
m_ioObject.Plug(ioThread);
m_ioObject.AddFd(m_handle);
m_ioObject.SetPollin(m_handle);
DropSubscriptions();
// push message to the session because there is no identity message with pgm
session.PushMsg(new Msg());
}
public void Bind(String addr)
{
if (m_ctxTerminated)
{
throw TerminatingException.Create();
}
// Process pending commands, if any.
ProcessCommands(0, false);
string protocol;
string address;
DecodeAddress(addr, out address, out protocol);
CheckProtocol(protocol);
if (protocol.Equals("inproc"))
{
Ctx.Endpoint endpoint = new Ctx.Endpoint(this, m_options);
RegisterEndpoint(addr, endpoint);
// Save last endpoint URI
m_options.LastEndpoint = addr;
return;
}
if ((protocol.Equals("pgm") || protocol.Equals("epgm")) && (
m_options.SocketType == ZmqSocketType.Pub || m_options.SocketType == ZmqSocketType.Xpub))
{
// For convenience's sake, bind can be used interchageable with
// connect for PGM and EPGM transports.
Connect(addr);
return;
}
// Remaining trasnports require to be run in an I/O thread, so at this
// point we'll choose one.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
if (ioThread == null)
{
throw NetMQException.Create(ErrorCode.EMTHREAD);
}
if (protocol.Equals("tcp"))
{
TcpListener listener = new TcpListener(
ioThread, this, m_options);
try
{
listener.SetAddress(address);
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals("pgm") || protocol.Equals("epgm"))
{
PgmListener listener = new PgmListener(ioThread, this, m_options);
try
{
listener.Init(address);
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
m_options.LastEndpoint = addr;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals("ipc"))
{
IpcListener listener = new IpcListener(
ioThread, this, m_options);
try
{
listener.SetAddress(address);
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
Debug.Assert(false);
throw NetMQException.Create(ErrorCode.EFAULT);
}
public void Plug(IOThread ioThread, SessionBase session)
{
m_encoder.SetMsgSource(session);
AddFd(m_socket);
SetPollout(m_socket);
// get the first message from the session because we don't want to send identities
session.PullMsg();
}
public static SessionBase Create(IOThread ioThread, bool connect,
SocketBase socket, Options options, Address addr)
{
SessionBase s;
switch (options.SocketType)
{
case ZmqSocketType.Req:
s = new Req.ReqSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Dealer:
s = new Dealer.DealerSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Rep:
s = new Rep.RepSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Router:
s = new Router.RouterSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Pub:
s = new Pub.PubSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Xpub:
s = new XPub.XPubSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Sub:
s = new Sub.SubSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Xsub:
s = new XSub.XSubSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Push:
s = new Push.PushSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Pull:
s = new Pull.PullSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Pair:
s = new Pair.PairSession(ioThread, connect,
socket, options, addr);
break;
case ZmqSocketType.Stream:
s = new Stream.StreamSession(ioThread, connect, socket, options, addr);
break;
default:
throw InvalidException.Create("type=" + options.SocketType);
}
return s;
}
public IpcListener(IOThread ioThread, SocketBase socket, Options options) : base(ioThread, socket, options)
{
m_address = new IpcAddress();
}
// When migrating an object from one I/O thread to another, first
// unplug it, then migrate it, then plug it to the new thread.
public void Plug([NotNull] IOThread ioThread)
{
Debug.Assert(ioThread != null);
m_ioThread = ioThread;
}
public IpcListener(IOThread ioThread, SocketBase socket, Options options)
: base(ioThread, socket, options)
{
m_address = new IpcAddress();
}
public SocketBase CreateSocket(ZmqSocketType type)
{
SocketBase s = null;
lock (m_slotSync)
{
if (m_starting)
{
m_starting = false;
// Initialise the array of mailboxes. Additional three slots are for
// zmq_term thread and reaper thread.
int ios;
int mazmq;
lock (m_optSync)
{
mazmq = m_maxSockets;
ios = m_ioThreadCount;
}
m_slotCount = mazmq + ios + 2;
m_slots = new Mailbox[m_slotCount];
//alloc_Debug.Assert(slots);
// Initialise the infrastructure for zmq_term thread.
m_slots[TermTid] = m_termMailbox;
// Create the reaper thread.
m_reaper = new Reaper(this, ReaperTid);
//alloc_Debug.Assert(reaper);
m_slots[ReaperTid] = m_reaper.Mailbox;
m_reaper.Start();
// Create I/O thread objects and launch them.
for (int i = 2; i != ios + 2; i++)
{
IOThread ioThread = new IOThread(this, i);
//alloc_Debug.Assert(io_thread);
m_ioThreads.Add(ioThread);
m_slots[i] = ioThread.Mailbox;
ioThread.Start();
}
// In the unused part of the slot array, create a list of empty slots.
for (int i = (int)m_slotCount - 1;
i >= (int)ios + 2; i--)
{
m_emptySlots.Push(i);
m_slots[i] = null;
}
}
// Once zmq_term() was called, we can't create new sockets.
if (m_terminating)
{
throw TerminatingException.Create();
}
// If max_sockets limit was reached, return error.
if (m_emptySlots.Count == 0)
{
throw NetMQException.Create(ErrorCode.EMFILE);
}
// Choose a slot for the socket.
int slot = m_emptySlots.Pop();
// Generate new unique socket ID.
int sid = Interlocked.Increment(ref s_maxSocketId);
// Create the socket and register its mailbox.
s = SocketBase.Create(type, this, slot, sid);
if (s == null)
{
m_emptySlots.Push(slot);
return(null);
}
m_sockets.Add(s);
m_slots[slot] = s.Mailbox;
//LOG.debug("NEW Slot [" + slot + "] " + s);
}
return(s);
}
public SocketBase CreateSocket(ZmqSocketType type)
{
lock (m_slotSync)
{
if (m_starting)
{
m_starting = false;
// Initialise the array of mailboxes. Additional three slots are for
// zmq_term thread and reaper thread.
int ios;
int mazmq;
lock (m_optSync)
{
mazmq = m_maxSockets;
ios = m_ioThreadCount;
}
m_slotCount = mazmq + ios + 2;
m_slots = new IMailbox[m_slotCount];
//alloc_Debug.Assert(slots);
// Initialise the infrastructure for zmq_term thread.
m_slots[TermTid] = m_termMailbox;
// Create the reaper thread.
m_reaper = new Reaper(this, ReaperTid);
//alloc_Debug.Assert(reaper);
m_slots[ReaperTid] = m_reaper.Mailbox;
m_reaper.Start();
// Create I/O thread objects and launch them.
for (int i = 2; i != ios + 2; i++)
{
var ioThread = new IOThread(this, i);
//alloc_Debug.Assert(io_thread);
m_ioThreads.Add(ioThread);
m_slots[i] = ioThread.Mailbox;
ioThread.Start();
}
// In the unused part of the slot array, create a list of empty slots.
for (int i = m_slotCount - 1; i >= ios + 2; i--)
{
m_emptySlots.Push(i);
m_slots[i] = null;
}
}
// Once zmq_term() was called, we can't create new sockets.
if (m_terminating)
{
string xMsg = String.Format("Ctx.CreateSocket({0}), cannot create new socket while terminating.", type);
throw new TerminatingException(innerException: null, message: xMsg);
}
// If max_sockets limit was reached, return error.
if (m_emptySlots.Count == 0)
{
#if DEBUG
string xMsg = String.Format("Ctx.CreateSocket({0}), max number of sockets {1} reached.", type, m_maxSockets);
throw NetMQException.Create(xMsg, ErrorCode.TooManyOpenSockets);
#else
throw NetMQException.Create(ErrorCode.TooManyOpenSockets);
#endif
}
// Choose a slot for the socket.
int slot = m_emptySlots.Pop();
// Generate new unique socket ID.
int socketId = Interlocked.Increment(ref s_maxSocketId);
// Create the socket and register its mailbox.
SocketBase s = SocketBase.Create(type, this, slot, socketId);
m_sockets.Add(s);
m_slots[slot] = s.Mailbox;
//LOG.debug("NEW Slot [" + slot + "] " + s);
return(s);
}
}
public SocketBase CreateSocket(ZmqSocketType type)
{
SocketBase s = null;
lock (m_slotSync)
{
if (m_starting)
{
m_starting = false;
// Initialise the array of mailboxes. Additional three slots are for
// zmq_term thread and reaper thread.
int ios;
int mazmq;
lock (m_optSync)
{
mazmq = m_maxSockets;
ios = m_ioThreadCount;
}
m_slotCount = mazmq + ios + 2;
m_slots = new Mailbox[m_slotCount];
//alloc_Debug.Assert(slots);
// Initialise the infrastructure for zmq_term thread.
m_slots[TermTid] = m_termMailbox;
// Create the reaper thread.
m_reaper = new Reaper(this, ReaperTid);
//alloc_Debug.Assert(reaper);
m_slots[ReaperTid] = m_reaper.Mailbox;
m_reaper.Start();
// Create I/O thread objects and launch them.
for (int i = 2; i != ios + 2; i++)
{
IOThread ioThread = new IOThread(this, i);
//alloc_Debug.Assert(io_thread);
m_ioThreads.Add(ioThread);
m_slots[i] = ioThread.Mailbox;
ioThread.Start();
}
// In the unused part of the slot array, create a list of empty slots.
for (int i = (int)m_slotCount - 1;
i >= (int)ios + 2; i--)
{
m_emptySlots.Push(i);
m_slots[i] = null;
}
}
// Once zmq_term() was called, we can't create new sockets.
if (m_terminating)
{
ZError.ErrorNumber = ErrorNumber.ETERM;
return null;
}
// If max_sockets limit was reached, return error.
if (m_emptySlots.Count == 0)
{
ZError.ErrorNumber = ErrorNumber.EMFILE;
return null;
}
// Choose a slot for the socket.
int slot = m_emptySlots.Pop();
// Generate new unique socket ID.
int sid = s_maxSocketId.IncrementAndGet();
// Create the socket and register its mailbox.
s = SocketBase.Create(type, this, slot, sid);
if (s == null)
{
m_emptySlots.Push(slot);
return null;
}
m_sockets.Add(s);
m_slots[slot] = s.Mailbox;
//LOG.debug("NEW Slot [" + slot + "] " + s);
}
return s;
}
public void Plug(IOThread ioThread,
SessionBase session)
{
Debug.Assert(!m_plugged);
m_plugged = true;
// Connect to session object.
Debug.Assert(m_session == null);
Debug.Assert(session != null);
m_session = session;
m_socket = m_session.Socket;
m_ioObject = new IOObject(null);
m_ioObject.SetHandler(this);
// Connect to I/O threads poller object.
m_ioObject.Plug(ioThread);
m_ioObject.AddFd(m_handle);
// Send the 'length' and 'flags' fields of the identity message.
// The 'length' field is encoded in the long format.
m_greetingOutputBuffer[m_outsize++] = ((byte) 0xff);
m_greetingOutputBuffer.PutLong((long) m_options.IdentitySize + 1, 1);
m_outsize += 8;
m_greetingOutputBuffer[m_outsize++] = ((byte) 0x7f);
m_outpos = new ByteArraySegment(m_greetingOutputBuffer);
m_ioObject.SetPollin(m_handle);
m_ioObject.SetPollout(m_handle);
// Flush all the data that may have been already received downstream.
InEvent();
}
public SocketBase CreateSocket(ZmqSocketType type)
{
lock (m_slotSync)
{
if (m_starting)
{
m_starting = false;
// Initialise the array of mailboxes. Additional three slots are for
// zmq_term thread and reaper thread.
int ios;
int mazmq;
lock (m_optSync)
{
mazmq = m_maxSockets;
ios = m_ioThreadCount;
}
m_slotCount = mazmq + ios + 2;
m_slots = new IMailbox[m_slotCount];
//alloc_Debug.Assert(slots);
// Initialise the infrastructure for zmq_term thread.
m_slots[TermTid] = m_termMailbox;
// Create the reaper thread.
m_reaper = new Reaper(this, ReaperTid);
//alloc_Debug.Assert(reaper);
m_slots[ReaperTid] = m_reaper.Mailbox;
m_reaper.Start();
// Create I/O thread objects and launch them.
for (int i = 2; i != ios + 2; i++)
{
var ioThread = new IOThread(this, i);
//alloc_Debug.Assert(io_thread);
m_ioThreads.Add(ioThread);
m_slots[i] = ioThread.Mailbox;
ioThread.Start();
}
// In the unused part of the slot array, create a list of empty slots.
for (int i = m_slotCount - 1; i >= ios + 2; i--)
{
m_emptySlots.Push(i);
m_slots[i] = null;
}
}
// Once zmq_term() was called, we can't create new sockets.
if (m_terminating)
{
string xMsg = string.Format("Ctx.CreateSocket({0}), cannot create new socket while terminating.", type);
throw new TerminatingException(innerException: null, message: xMsg);
}
// If max_sockets limit was reached, return error.
if (m_emptySlots.Count == 0)
{
#if DEBUG
string xMsg = string.Format("Ctx.CreateSocket({0}), max number of sockets {1} reached.", type, m_maxSockets);
throw NetMQException.Create(xMsg, ErrorCode.TooManyOpenSockets);
#else
throw NetMQException.Create(ErrorCode.TooManyOpenSockets);
#endif
}
// Choose a slot for the socket.
int slot = m_emptySlots.Pop();
// Generate new unique socket ID.
int socketId = Interlocked.Increment(ref s_maxSocketId);
// Create the socket and register its mailbox.
SocketBase s = SocketBase.Create(type, this, slot, socketId);
m_sockets.Add(s);
m_slots[slot] = s.Mailbox;
//LOG.debug("NEW Slot [" + slot + "] " + s);
return s;
}
}
public SubSession(IOThread ioThread, bool connect,
SocketBase socket, Options options, Address addr)
: base(ioThread, connect, socket, options, addr)
{
}
public void Bind([NotNull] string addr)
{
CheckContextTerminated();
// Process pending commands, if any.
ProcessCommands(0, false);
string protocol;
string address;
DecodeAddress(addr, out address, out protocol);
CheckProtocol(protocol);
if (protocol.Equals(Address.InProcProtocol))
{
var endpoint = new Ctx.Endpoint(this, m_options);
bool addressRegistered = RegisterEndpoint(addr, endpoint);
if (!addressRegistered)
{
string xMsg = String.Format("Cannot bind address ( {0} ) - already in use.", addr);
throw new AddressAlreadyInUseException(xMsg);
}
// Save last endpoint URI
m_options.LastEndpoint = addr;
return;
}
if ((protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol)) && (
m_options.SocketType == ZmqSocketType.Pub || m_options.SocketType == ZmqSocketType.Xpub))
{
// For convenience's sake, bind can be used interchangeable with
// connect for PGM and EPGM transports.
Connect(addr);
return;
}
// Remaining transports require to be run in an I/O thread, so at this
// point we'll choose one.
IOThread ioThread = ChooseIOThread(m_options.Affinity);
if (ioThread == null)
{
throw NetMQException.Create(ErrorCode.EmptyThread);
}
if (protocol.Equals(Address.TcpProtocol))
{
var listener = new TcpListener(ioThread, this, m_options);
try
{
listener.SetAddress(address);
m_port = listener.Port;
// Recreate the address string (localhost:1234) in case the port was system-assigned
var host = address.Substring(0, address.IndexOf(':'));
addr = "tcp://" + host + ":" + m_port;
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals(Address.PgmProtocol) || protocol.Equals(Address.EpgmProtocol))
{
var listener = new PgmListener(ioThread, this, m_options);
try
{
listener.Init(address);
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
m_options.LastEndpoint = addr;
AddEndpoint(addr, listener);
return;
}
if (protocol.Equals(Address.IpcProtocol))
{
var listener = new IpcListener(ioThread, this, m_options);
try
{
listener.SetAddress(address);
m_port = listener.Port;
}
catch (NetMQException ex)
{
listener.Destroy();
EventBindFailed(addr, ex.ErrorCode);
throw;
}
// Save last endpoint URI
m_options.LastEndpoint = listener.Address;
AddEndpoint(addr, listener);
return;
}
Debug.Assert(false);
throw new FaultException(String.Format("SocketBase.Bind({0}) failure.", addr));
}
public PairSession(IOThread ioThread, bool connect,
SocketBase socket, Options options,
Address addr)
: base(ioThread, connect, socket, options, addr)
{
}
/// <summary> Initializes a new instance of the <see cref="Own" /> class that is running within I/O thread. </summary>
/// <param name="ioThread">The I/O thread.</param>
/// <param name="options">The options.</param>
/// <remarks> Note that the owner is unspecified in the constructor. It'll be assigned later on using <see cref="SetOwner"/>
/// when the object is plugged in. </remarks>
protected Own(IOThread ioThread, Options options)
: base(ioThread)
{
m_options = options;
m_terminating = false;
m_processedSeqnum = 0;
m_owner = null;
m_termAcks = 0;
}