public RelayPort(Cpu.Pin pin, bool initialState, bool glitchFilter, Port.ResistorMode resistor, int timeout)
: base(pin, initialState, glitchFilter, resistor)
{
currentstate = initialState;
relayThread = new Thread(new ThreadStart(RelayLoop));
relayThread.Start();
}
public AnalogInputPin (Cpu.AnalogChannel pin, double updateFrequency = DefaultUpdateFrequency)
: base (updateFrequency)
{
input = new AnalogInput (pin, -1);
var initialValue = input.Read ();
Analog = AddPort ("Analog", Units.Ratio, initialValue);
}
public Switch(string switchName, FEZ_Pin.Interrupt IOport, string downScript, string upScript, Port.InterruptMode ActivateState)
{
SwitchName = switchName;
IOPort = IOport;
DownScript = downScript;
UpScript = upScript;
InterruptPort IntButton = new InterruptPort((Cpu.Pin)IOPort, false, Port.ResistorMode.PullUp, ActivateState);
IntButton.OnInterrupt += new NativeEventHandler(this.Press);
}
public ButtonPad(GPIOButtonInputProvider sink, Button button, Cpu.Pin pin, Port.InterruptMode mode)
{
_sink = sink;
_button = button;
_buttonDevice = InputManager.CurrentInputManager.ButtonDevice;
_port = new InterruptPort( pin, true, Port.ResistorMode.PullUp, mode );
_port.OnInterrupt += new NativeEventHandler(this.Interrupt);
}
public DigitalInputPin (Cpu.Pin pin, bool glitchFilter = false)
{
port = new InterruptPort (pin, glitchFilter, HWPort.ResistorMode.Disabled, HWPort.InterruptMode.InterruptEdgeBoth);
var initialValue = port.Read () ? 1 : 0;
Output = AddPort ("Output", Units.Digital, initialValue);
port.OnInterrupt += port_OnInterrupt;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="pin">Pin connected to the Ultrasonic sensor</param>
/// <param name="glitchFilter">Input debouncing filter (default is true)</param>
/// <param name="resistor">The resistor mode that establishes a default state for the port (default is Disabled)</param>
/// <param name="period">Period for distance measure</param>
public Ultrasonic(Cpu.Pin pin,
bool glitchFilter = true,
Port.ResistorMode resistor = Port.ResistorMode.Disabled,
int period = 5000)
{
this.trPort = new TristatePort(pin, false, glitchFilter, resistor);
this.period = period;
// set duetime as period
this.timer = new Timer(DistanceMeasureCallback, null, this.period, this.period);
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="pin">Pin connected to the PIR</param>
/// <param name="glitchFilter">Input debouncing filter (default is true)</param>
/// <param name="resistor">The resistor mode that establishes a default state for the port (default is Disabled)</param>
/// <param name="interrupt">Defines the type of edge-change triggering the interrupt (default is InterruptEdgeBoth)</param>
/// <param name="enabled">Intial Pir enable state</param>
public Pir(Cpu.Pin pin,
bool glitchFilter = true,
Port.ResistorMode resistor = Port.ResistorMode.Disabled,
Port.InterruptMode interrupt = Port.InterruptMode.InterruptEdgeBoth,
bool enabled = true)
{
this.intPort = new InterruptPort(pin, glitchFilter, resistor, interrupt);
this.intPort.OnInterrupt += new NativeEventHandler(intPort_OnInterrupt);
this.Enabled = enabled;
}
/// <summary>
/// PushButton constructor.
/// </summary>
/// <param name="pin">GPIO input pin</param>
/// <param name="callback">Callback delegate</param>
/// <param name="resmode">Resistor mode</param>
public PushButton(Cpu.Pin pin, NativeEventHandler callback, Port.ResistorMode resmode)
{
Port.InterruptMode imode = resmode == Port.ResistorMode.PullUp ?
Port.InterruptMode.InterruptEdgeLow : Port.InterruptMode.InterruptEdgeHigh;
m_interruptPort = new InterruptPort(pin, true, resmode, imode);
if (callback != null) {
m_interruptPort.OnInterrupt += callback;
}
// default behavior is to always clear interrupt
m_interruptPort.OnInterrupt += new NativeEventHandler((uint port, uint state, DateTime time) => {
m_interruptPort.ClearInterrupt();
});
}
private float temp; // Temperature
#endregion Fields
#region Constructors
///PullUpResistor pullUp)
// Instantiated via derived class
protected DhtSensor(Cpu.Pin pin1, Cpu.Pin pin2, Port.ResistorMode pullUp)
{
var resistorMode = (Port.ResistorMode)pullUp;
portIn = new InterruptPort(pin2, false, resistorMode, Port.InterruptMode.InterruptEdgeLow);
portIn.OnInterrupt += new NativeEventHandler(portIn_OnInterrupt);
portIn.DisableInterrupt(); // Enabled automatically in the previous call
portOut = new TristatePort(pin1, true, false, resistorMode);
if (!CheckPins())
{
throw new InvalidOperationException("DHT sensor pins are not connected together.");
}
}
/// <summary>
/// Parte l'evento dell'interruzione quando il livello del segnale di interruzione è alto (ovvero quando il pulsante viene premuto).
/// Se si usa un bottone diverso dal built-in, è necessario collegare delle resistenze di pull-down per l'interruttore .
/// Lady Ada è un eccelente tutorial su questo argomento: http://www.ladyada.net/learn/arduino/lesson5.html
/// </summary>
/// <param name="pin">Un pin digitale collegato al pulsante.</param>
/// <param name="intMode">Definisce il tipo di cambio di livello innescando l'evento dell'interrupt.</param>
/// <param name="target">Il gestore di eventi viene invocato quando si verifica un interrupt.</param>
/// <param name="resistorMode">Configurazione interna della resistenza di pullup.</param>
/// <param name="glitchFilter">Ingresso filtro antirimbalzo.</param>
public Pulsante(Cpu.Pin pin, Port.InterruptMode intMode = Port.InterruptMode.InterruptEdgeLow,
NativeEventHandler target = null, Port.ResistorMode resistorMode = Port.ResistorMode.Disabled,
bool glitchFilter = true)
{
Input = new InterruptPort(pin, glitchFilter, resistorMode, intMode);
if (target == null)
{
Input.OnInterrupt += InternalInterruptHandler;
}
else
{
Input.OnInterrupt += target;
}
Input.EnableInterrupt();
}
public static bool AttemptSetTristatePort(
Cpu.Pin portID, bool initialState, bool glitchFilter, Port.ResistorMode resistor)
{
if (triPort == null)
{
try
{
triPort = new TristatePort(portID, initialState, glitchFilter, resistor);
return true;
}
catch (Exception e)
{
Debug.Print("Setting triport request failed:\n" + e);
return false;
}
}
else
{
return false;
}
}
public IgnitionRelay(Cpu.Pin pin, bool initialState, bool glitchFilter, Port.ResistorMode resistor, Sensors.Tachometer tach)
: base(pin, initialState, glitchFilter, resistor, -1)
{
Tachometer = tach;
}
/// <summary>
/// Creates a new IRQ Port
/// </summary>
/// <param name="Pin">The pin number</param>
/// <param name="GlitchFilter">Turns on or off the glitchfilter</param>
/// <param name="ResistorMode">Selects the resistor mode</param>
public IntegratedIRQ(Cpu.Pin Pin, bool GlitchFilter = false, Port.ResistorMode ResistorMode = Port.ResistorMode.Disabled)
{
this._Port = new InterruptPort(Pin, GlitchFilter, ResistorMode, Port.InterruptMode.InterruptEdgeBoth);
this._Port.OnInterrupt += new NativeEventHandler(_Port_OnInterrupt);
}
public OneCoreInterruptPort(int cpuPort, bool initialState, Port.ResistorMode resistorMode, Port.InterruptMode interruptMode)
{
this.port = new InterruptPort((Cpu.Pin)cpuPort, initialState, resistorMode, interruptMode);
this.port.OnInterrupt += this.InvokeOnOnInterrupt;
}
public StarterRelay(Cpu.Pin pin, bool initialState, bool glitchFilter, Port.ResistorMode resistor, int timeout, Sensors.Tachometer tach)
: base(pin, initialState, glitchFilter, resistor, timeout)
{
Tachometer = tach;
}
/// <summary>
/// Configures the pin as digital input
/// </summary>
/// <param name="GlitchFilter">Enables the glitch filter</param>
/// <param name="Resistor">Enables resistor modes</param>
public void ConfigureInput(bool GlitchFilter = false, Port.ResistorMode Resistor = Port.ResistorMode.Disabled)
{
this.ReleasePin();
this._In = new InputPort(this.Pin, GlitchFilter, Resistor);
this.Type = PortType.Input;
}
public void SetEdge(Cpu.Pin pin, Port.InterruptMode interruptMode)
{
String interrupt = "none";
Console.WriteLine(interruptMode);
switch (interruptMode)
{
case Port.InterruptMode.InterruptNone:
break;
case Port.InterruptMode.InterruptEdgeLow:
interrupt = "falling";
break;
case Port.InterruptMode.InterruptEdgeLevelLow:
throw new Exception();
case Port.InterruptMode.InterruptEdgeLevelHigh:
throw new Exception();
case Port.InterruptMode.InterruptEdgeHigh:
interrupt = "rising";
break;
case Port.InterruptMode.InterruptEdgeBoth:
interrupt = "both";
break;
}
File.WriteAllText(GPIO_PATH + "gpio" + ((int)pin) + "/edge", interrupt.ToLower());
}
public Button(FEZ_Pin.Digital pin, Port.ResistorMode mode = Port.ResistorMode.PullUp)
{
interrupt = new InputPort((Cpu.Pin) pin, false, mode);
thread = new Thread(Run);
thread.Start();
}
/// <summary>
/// Creates a new GPI Port
/// </summary>
/// <param name="Pin">The pin number</param>
/// <param name="GlitchFilter">Turns on or off the glitchfilter</param>
/// <param name="ResistorMode">Selects the resistor mode</param>
public IntegratedGPI(Cpu.Pin Pin, bool GlitchFilter = false, Port.ResistorMode ResistorMode = Port.ResistorMode.Disabled)
{
this._Port = new InputPort(Pin, GlitchFilter, ResistorMode);
}
public void InitJackdepart(Cpu.Pin numInterrupt, Port.InterruptMode front)
{
InterruptPort jack = new InterruptPort((Cpu.Pin)numInterrupt, true, Port.ResistorMode.PullUp, front);
jack.OnInterrupt += new NativeEventHandler(AttendreJack);
}
/// <summary>Creates a new Bidirectional port</summary>
/// <param name="PortId">Pin identifier for the GPIO pin</param>
/// <param name="InitialState">Initial state of the pin</param>
/// <param name="GlitchFilter">flag to indicate if glitch filtering should be used</param>
/// <param name="Resistor">Resistor mode to use if supported by underlying hardware</param>
BidirectionalPort(Cpu.Pin PortId, bool InitialState, bool GlitchFilter, Port.ResistorMode Resistor)
: this(new TristatePort(PortId, InitialState, GlitchFilter, Resistor))
{
}
/// <summary>Constructs a new button definition</summary>
/// <remarks>
/// The resistor mode can influence the detection of an up/down press.
/// Setting it incorrectly can cause unexpected results. Check with the
/// hardware design schematics or documentation for best results.
/// </remarks>
/// <param name="Button">The button value to assign to the GPIO pin.</param>
/// <param name="AutoRepeat">Boolean flag to indicate if this button should auto-repeat</param>
/// <param name="ResistorMode">
/// Resistor mode to configure for the GPIO pin [may be ignored on hardware that
/// does not support dynamic configuration ]
/// </param>
/// <param name="InterruptMode">
/// Interrupt mode to configure for the GPIO pin [may be ignored on hardware that
/// does not support dynamic configuration ]
/// </param>
public ButtonDefinition( Microsoft.SPOT.Hardware.Button Button
, bool AutoRepeat
, Port.ResistorMode ResistorMode
, Port.InterruptMode InterruptMode
)
{
this._Button = Button;
this._Pin = Pin;
this._AutoRepeat = AutoRepeat;
this._ResistorMode = ResistorMode;
this._InterruptMode = InterruptMode;
}
/// <summary>
/// Create and open an instance of an input port,
/// with embedded auto-repeat capabilities
/// </summary>
/// <param name="port">The I/O pin selected for the input</param>
/// <param name="resistor">The resistor wired-logic easing</param>
/// <param name="activeLevel">The level on which the input has to be considered active</param>
public AutoRepeatInputPort(
Cpu.Pin port,
Port.ResistorMode resistor,
bool activeLevel)
: base(port, false, resistor)
{
this.ActiveLevel = activeLevel;
//create, then start the working thread
this._workingThread = new Thread(this.Worker);
this._workingThread.Start();
}
public CPUInputPort(Cpu.Pin inputPin, bool glitchFilter, Port.ResistorMode resister)
{
this.inputPut = new InputPort(inputPin, glitchFilter, resister);
}
