/// <summary>
/// This method will reload the artifact from the XLinq tree. This *DOES NOT* do a 'deep reloading', i.e. reloading from disk.
/// </summary>
internal virtual void ReloadArtifact()
{
try
{
IsArtifactReloading = true;
// clear out the artifact set of our information
ArtifactSet.RemoveArtifact(this);
ArtifactSet.Add(this);
// reparse this artifact
State = EFElementState.None;
Parse(new List <XName>());
if (State == EFElementState.Parsed)
{
XmlModelHelper.NormalizeAndResolve(this);
}
// this will do some analysis to determine if the artifact is safe for the designer, or should be displayed in the xml editor
DetermineIfArtifactIsDesignerSafe();
FireArtifactReloadedEvent();
_requiresReloading = false;
IsDirty = false;
}
finally
{
IsArtifactReloading = false;
}
}
/// <summary>
/// Reload the EntityDesignArtifact and DiagramArtifact (if available).
/// </summary>
internal override void ReloadArtifact()
{
try
{
IsArtifactReloading = true;
// clear out the artifact set of our information
ArtifactSet.RemoveArtifact(this);
ArtifactSet.Add(this);
// Reparse the artifact.
State = EFElementState.None;
Parse(new List <XName>());
if (State == EFElementState.Parsed)
{
XmlModelHelper.NormalizeAndResolve(this);
}
// NOTE: DiagramArtifact must be reloaded after EntityDesignArtifact finishes reloading but before we fire artifact reloaded event.
if (DiagramArtifact != null)
{
DiagramArtifact.ReloadArtifact();
}
// this will do some analysis to determine if the artifact is safe for the designer, or should be displayed in the xml editor
DetermineIfArtifactIsDesignerSafe();
FireArtifactReloadedEvent();
RequireDelayedReload = false;
IsDirty = false;
}
finally
{
IsArtifactReloading = false;
}
}
private void ProcessExternalAddOrUpdateChange(
EfiChangeGroup changeGroup, List <EFContainer> containersToRenormalize, ExternalXMLModelChange undoModelChange)
{
var changedEFObject = undoModelChange.ChangedEFObject;
var parentEFObject = undoModelChange.Parent;
if (parentEFObject != null)
{
var parentEFContainer = parentEFObject as EFContainer;
Debug.Assert(parentEFContainer != null, "parentEFObject was not an EFContainer!");
// if this is an "add" for an element, then the parent will parse the new child.
// if this is an "add" for an attribute, then we have to directly set the XObject
// if this is an "update" then we will just record it in our model
if (parentEFContainer != null
&&
undoModelChange.Action == XObjectChange.Add)
{
var newXElement = undoModelChange.XNode as XElement;
if (newXElement != null
&&
parentEFContainer.ReparseSingleElement(new List <XName>(), newXElement))
{
var newEFObject = ModelItemAnnotation.GetModelItem(undoModelChange.XNode);
Debug.Assert(newEFObject != null, "Couldn't find the ModelItemAnnotation for the newly created XLinq node");
if (newEFObject != null)
{
var newEFElement = newEFObject as EFElement;
Debug.Assert(newEFElement != null, "If the XObject was an XElement, then we should have an EFElement as well");
if (newEFElement != null)
{
XmlModelHelper.NormalizeAndResolve(newEFElement);
}
// we need to rediscover the XLinq annotation to pick up the new EFObject that just got created
changedEFObject = ModelItemAnnotation.GetModelItem(undoModelChange.XNode);
}
}
else if (undoModelChange.XNode is XAttribute)
{
var staleItemBinding = changedEFObject as ItemBinding;
var staleDefaultableValue = changedEFObject as DefaultableValue;
// item bindings might have gotten added after their parents got added in which case the MIA will be stale.
// we have to step through the new parent, set the xobject manually, rebind, and reset the annotation on the xlinq node.
if (staleItemBinding != null)
{
foreach (var child in parentEFContainer.Children)
{
var updatedItemBinding = child as ItemBinding;
if (updatedItemBinding != null &&
updatedItemBinding.EFTypeName == staleItemBinding.EFTypeName)
{
updatedItemBinding.SetXObject(undoModelChange.XNode);
updatedItemBinding.Rebind();
changedEFObject = updatedItemBinding;
}
}
}
// for defaultable values that got added after parents were added, we have to discover the actual EFObject in the Escher tree,
// set the xobject, and reset the annotation on the existing xlinq node
else if (staleDefaultableValue != null)
{
foreach (var child in parentEFContainer.Children)
{
var updatedDefaultableValue = child as DefaultableValue;
if (updatedDefaultableValue != null &&
updatedDefaultableValue.EFTypeName == staleDefaultableValue.EFTypeName)
{
updatedDefaultableValue.SetXObject(undoModelChange.XNode);
changedEFObject = updatedDefaultableValue;
}
}
}
ModelItemAnnotation.SetModelItem(undoModelChange.XNode, changedEFObject);
}
}
else if (undoModelChange.Action == XObjectChange.Value)
{
Debug.Assert(undoModelChange.XNode is XAttribute, "The only 'value' change Escher supports is to XAttributes");
if (undoModelChange.XNode is XAttribute)
{
var existingItemBinding = changedEFObject as ItemBinding;
if (existingItemBinding != null)
{
existingItemBinding.Rebind();
}
// we have to normalize and resolve the parents of DefaultableValues
// because this change could affect the parent's RefName, affecting SingleItemBindings
var defaultableValue = changedEFObject as DefaultableValue;
if (defaultableValue != null)
{
XmlModelHelper.NormalizeAndResolve(parentEFContainer);
#if DEBUG
var xattr = undoModelChange.XNode as XAttribute;
var defaultableValueValue = defaultableValue.ObjectValue as string;
if (defaultableValueValue != null)
{
// verify that the defaultableValue's value & the XAttribute's value are the same
Debug.Assert(xattr.Value == defaultableValueValue);
}
#endif
}
}
}
else
{
Debug.Assert(false, "Encountered a non-valid type of change to the XML: " + undoModelChange.Action.ToString());
throw new ChangeProcessingFailedException();
}
// if an object's state is unresolved, then queue it for re-normalization. This occurs
// for example, if itembinding changes occur before the 'add' changes for their targeted objects
var itemBinding = changedEFObject as ItemBinding;
if ((itemBinding != null && false == itemBinding.Resolved) ||
parentEFContainer.State != EFElementState.Resolved)
{
containersToRenormalize.Add(parentEFContainer);
}
CheckObjectToRenormalize(changedEFObject, ref containersToRenormalize);
// now tell the views that a new item has been created; this will happen for both an 'add' and a 'change'
string oldValue = null;
string newValue = null;
string property = null;
GetOldAndNewValues(undoModelChange.XmlChange, out property, out oldValue, out newValue);
changeGroup.RecordModelChange(GetChangeType(undoModelChange.XmlChange), changedEFObject, property, oldValue, newValue);
}
else
{
// we got a change event on a root-node in the document.
// This will cause an NRE when looking for the model-item annotation,
// so throw this exception to cause the caller to reload the doc
throw new ChangeProcessingFailedException();
}
}
private EfiChangeGroup ProcessUndoRedoChanges(XmlTransactionEventArgs xmlTransactionEventArgs)
{
using (var tx = new EfiTransaction(this, EfiTransactionOriginator.UndoRedoOriginatorId, xmlTransactionEventArgs.Transaction))
{
var changeGroup = tx.ChangeGroup;
var undoChanges = new List <ExternalXMLModelChange>();
var containersToRenormalize = new List <EFContainer>();
var bindingsForRebind = new List <ItemBinding>();
var namespaces = GetNamespaces();
// filter the changes received from XmlEditor and resolve changed EFObjects and their parents
foreach (var xmlChange in xmlTransactionEventArgs.Transaction.Changes())
{
// determine how to process this edit
if (xmlChange.Node.NodeType == XmlNodeType.Element ||
xmlChange.Node.NodeType == XmlNodeType.Attribute ||
xmlChange.Node.NodeType == XmlNodeType.Document)
{
if (xmlChange.Node.NodeType == XmlNodeType.Element &&
xmlChange.Action == XObjectChange.Value)
{
var nodeValueChange = xmlChange as IXmlNodeValueChange;
Debug.Assert(
nodeValueChange != null &&
string.IsNullOrEmpty(nodeValueChange.OldValue) &&
string.IsNullOrEmpty(nodeValueChange.NewValue));
// in cases where we are undoing the addition of all children to an element A, the Xml Model
// will forcibly add an empty string to the element A so that a "short" end tag "/>" is not created
// in this case, the change we will receive is a set value change on an element; we ignore this
}
else
{
var emc = new ExternalXMLModelChange(xmlChange, ExpectEFObjectForXObject);
if (emc.IsAnnotationChange(namespaces))
{
continue;
}
undoChanges.Add(emc);
}
}
}
// go through the undo changes and make changes to the model
foreach (var undoModelChange in undoChanges)
{
// Should ignore other artifact changes.
if (undoModelChange.ChangedEFObject.Artifact != this)
{
continue;
}
if (undoModelChange.Action == XObjectChange.Remove)
{
ProcessExternalRemoveChange(changeGroup, bindingsForRebind, undoModelChange);
}
else
{
ProcessExternalAddOrUpdateChange(changeGroup, containersToRenormalize, undoModelChange);
}
}
// because of the order in which elements were possibly added, certain ItemBindings were not resolved;
// therefore we have to step through the normalized EFElements again and normalize/resolve so their child
// ItemBindings will get resolved.
foreach (var container in containersToRenormalize)
{
XmlModelHelper.NormalizeAndResolve(container);
}
XmlModelHelper.RebindItemBindings(bindingsForRebind);
#if DEBUG
var visitor = GetVerifyModelIntegrityVisitor();
visitor.Traverse(this);
if (visitor.ErrorCount > 0)
{
Debug.WriteLine("Model Integrity Verifier found " + visitor.ErrorCount + " error(s):");
Debug.WriteLine(visitor.AllSerializedErrors);
Debug.Assert(
false, "Model Integrity Verifier found " + visitor.ErrorCount + " error(s). See the Debug console for details.");
}
#endif
return(changeGroup);
}
}
