public Form1()
{
InitializeComponent();
infodata = new InfoData();
czxdata = new CzxData();
listinfodata = new List <InfoData>();
listczxdata = new List <CzxData>();
fileper = new FileHelper();
caldev = new CalDev();
listcaldevdata = new List <CalDevData>();
math_lb = new Mathematics_lb();
chatra_lb = new CharacteristicTrack_lb();
latdev_lb = new LateralDeviationSet_lb();
ContextReport = new StringBuilder();
tabcontrol = new TabControl();
OpenFilesBut = new ToolStripButton();
SaveResBut = new ToolStripButton();
CalBut = new ToolStripButton();
DrawingBut = new ToolStripButton();
HelpBut = new ToolStripButton();
}
public List <CalDevData> CalDevRes(List <InfoData> ListInfoDa, List <CzxData> ListCzxDa)
{
List <CalDevData> ListCalDevDa = new List <CalDevData>();
Mathematics_lb Math_lb = new Mathematics_lb();
CharacteristicTrack_lb Chatra_lb = new CharacteristicTrack_lb();
LateralDeviationSet_lb Latdev_lb = new LateralDeviationSet_lb();
double N_L_DETA = 0.0;
double detax_jd21 = ListInfoDa[0].X - ListInfoDa[1].X;
double detay_jd21 = ListInfoDa[0].Y - ListInfoDa[1].Y;
double azimuth_jd21 = Math_lb.Math_AZIMUTH(detax_jd21, detay_jd21);
double azimuth_jd12 = Math_lb.Math_AZIMUTH(-detax_jd21, -detay_jd21);
double detax_jd23 = ListInfoDa[2].X - ListInfoDa[1].X;
double detay_jd23 = ListInfoDa[2].Y - ListInfoDa[1].Y;
double azimuth_jd23 = Math_lb.Math_AZIMUTH(detax_jd23, detay_jd23); // 计算交点到后一个交点的方位角,JD(i)到JD(i+1)的方位角
double azimuth_jd32 = Math_lb.Math_AZIMUTH(-detax_jd23, -detay_jd23); // 计算JD(i+1)到JD(i)的方位角
Chatra_lb.l0 = ListInfoDa[1].l0; // 缓和曲线
Chatra_lb.Rad = ListInfoDa[1].Rad; // 半径
Chatra_lb.erfa = Chatra_lb.ERFAFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.beta0 = Chatra_lb.BRTA0Fun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.m = Chatra_lb.MFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.p = Chatra_lb.PFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.T = Chatra_lb.TFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.L = Chatra_lb.LFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.E0 = Chatra_lb.E0Fun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.q = Chatra_lb.QFun(ListInfoDa[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
// 曲线特征点HY、YH点方位角
double azimuth_HY = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_jd12 + ListInfoDa[1].K * Chatra_lb.beta0);
double azimuth_YHJ = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_jd23 + ListInfoDa[1].K * (-1.0 * Chatra_lb.beta0));
double azimuth_YH = azimuth_YHJ;
double jd_mileage = ListInfoDa[1].Mil + Chatra_lb.T; // 交点的里程
Chatra_lb.ZH_XY = Chatra_lb.ZH_XYFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.HY_xy = Chatra_lb.HY_xyFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.HY_XY = Chatra_lb.HY_XYFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.QZ_xy = Chatra_lb.QZ_xyFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.QZ_XY = Chatra_lb.QZ_XYFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.YH_xy = Chatra_lb.YH_xyFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.YH_XY = Chatra_lb.YH_XYFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
Chatra_lb.HZ_XY = Chatra_lb.HZ_XYFun(ListInfoDa[1].X, ListInfoDa[1].Y, azimuth_jd12, azimuth_jd21, azimuth_jd23, azimuth_jd32, Chatra_lb.l0, Chatra_lb.Rad, ListInfoDa[1].K, ListInfoDa[1].erfa);
// 交点JD与曲中点QZ的方位角
double detax_JQ = Chatra_lb.QZ_XY[0, 0] - ListInfoDa[1].X;
double detay_JQ = Chatra_lb.QZ_XY[0, 1] - ListInfoDa[1].Y;
double azimuth_JQ = Math_lb.Math_AZIMUTH(detax_JQ, detay_JQ);
int befqzsl = 0;
int befqzc = 0;
int befqzcc = 0;
int aftqzcc = 0;
int aftqzc = 0;
int aftqzsl = 0;
string[,] radQZ = new string[1, 4];
double[,] T_N_L_befQZc = new double[ListCzxDa.Count, 13];
double[,] T_N_L_aftQZc = new double[ListCzxDa.Count, 13];
double detax_temp = 0.0; // 高斯坐标系下的X差
double detay_temp = 0.0; // 高斯坐标系下的Y差
double d_temp = 0.0;
double azimuth_temp = 0.0;
double angle_temp = 0.0;
double jdH_temp = 0.0;
double x_temp = 0.0; // 切线坐标系下测点的x坐标
double y_temp = 0.0; // 切线坐标系下测点的y坐标
double lx_temp = 0.0;
double ly_temp = 0.0;
double l_temp = 0.0;
double mileage_temp1 = 0.0;
double[,] Newton_L_temp = new double[1, 13];
double N_L_L0; // 储存初值
string[,] zx_temp = new string[ListCzxDa.Count, 1];
string[,] dis_temp = new string[ListCzxDa.Count, 2];
double[,] func_singleone = new double[1, 2]; // 临时变量供函数输出值
string[,] qx_calculate = new string[ListCzxDa.Count, 2];
double[,] XY_Simpson = new double[1, 2];
for (int i = 0; i < ListCzxDa.Count; i++)
{
CalDevData CalDevDa = new CalDevData();
ListCalDevDa.Add(CalDevDa);
detax_temp = ListCzxDa[i].X - ListInfoDa[1].X;
detay_temp = ListCzxDa[i].Y - ListInfoDa[1].Y;
d_temp = Math.Sqrt((detax_temp) * (detax_temp) + (detay_temp) * (detay_temp)); // 测点与交点的距离
azimuth_temp = Math_lb.Math_AZIMUTH(detax_temp, detay_temp);
if (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21) < Math_lb.Math_ANGLE(azimuth_jd21, azimuth_JQ)) // 若测点不在内侧，其与JD21方向的夹角也不会超过偏转角的1/2
{
angle_temp = Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21);
if ((d_temp * (Math.Cos(angle_temp))) >= Chatra_lb.T)
{
ListCalDevDa[befqzsl].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl].Y = ListCzxDa[i].Y;
mileage_temp1 = jd_mileage - d_temp * Math.Cos(angle_temp);
ListCalDevDa[befqzsl].PMil = mileage_temp1; // 里程
ListCalDevDa[befqzsl].Length = d_temp * (Math.Cos(angle_temp)) - Chatra_lb.T;
lx_temp = -(d_temp * (Math.Cos(angle_temp)) - Chatra_lb.T);
ly_temp = 0.0;
func_singleone = Math_lb.Math_xytoXYFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], lx_temp, ly_temp, azimuth_jd12, ListInfoDa[1].K);
ListCalDevDa[befqzsl].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl].DY = func_singleone[0, 1];
if ((Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23)) && (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23))) // 判断实测点是否在JD(i)到JD(i-1)与JD(i)到JD(i+1)所组成的夹角之间
{
ListCalDevDa[befqzsl].VDevVal = 1000.0 * d_temp * (Math.Sin(angle_temp)); // 横向偏差为正(mm)
}
else
{
ListCalDevDa[befqzsl].VDevVal = -1000.0 * d_temp * (Math.Sin(angle_temp)); // 横向偏差为负(mm)
}
ListCalDevDa[befqzsl].TAzi = azimuth_jd12;
ListCalDevDa[befqzsl].Poslabel = "Line"; // 位置标签
befqzsl++;
}
else
{
if ((Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23)) && (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23))) // 判断实测点是否在JD(i)到JD(i-1)与JD(i)到JD(i+1)所组成的夹角之间
{
jdH_temp = (Chatra_lb.T - Chatra_lb.HY_xy[0, 0] - Chatra_lb.HY_xy[0, 1] * (Math.Tan(Chatra_lb.beta0))) * (Math.Sin((Math.PI / 2.0) + Chatra_lb.beta0)) / (Math.Sin((Math.PI / 2.0) - angle_temp - Chatra_lb.beta0));
}
else
{
jdH_temp = (Chatra_lb.T - Chatra_lb.HY_xy[0, 0] - Chatra_lb.HY_xy[0, 1] * (Math.Tan(Chatra_lb.beta0))) * (Math.Sin((Math.PI / 2.0) - Chatra_lb.beta0)) / (Math.Sin((Math.PI / 2.0) - angle_temp + Chatra_lb.beta0));
}
if (d_temp > jdH_temp)
{
ListCalDevDa[befqzsl + befqzc].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl + befqzc].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl + befqzc].Y = ListCzxDa[i].Y;
func_singleone = Math_lb.Math_XYtoxyFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], ListCzxDa[i].X, ListCzxDa[i].Y, azimuth_jd12, ListInfoDa[1].K);
x_temp = func_singleone[0, 0];
y_temp = func_singleone[0, 1];
ListCalDevDa[befqzsl + befqzc].TCorx = x_temp;
ListCalDevDa[befqzsl + befqzc].TCory = y_temp; // 计算测点切线坐标系下坐标
if (befqzc == 0)
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Math.Sqrt((ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) * (ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) + (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1]) * (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1])));
}
else
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Convert.ToDouble(dis_temp[i - 1, 1]) + Math.Sqrt((ListCzxDa[i].X - ListCzxDa[i - 1].X) * (ListCzxDa[i].X - ListCzxDa[i - 1].X) + (ListCzxDa[i].Y - ListCzxDa[i - 1].Y) * (ListCzxDa[i].Y - ListCzxDa[i - 1].Y)));
}
//=================================================================
//
N_L_L0 = Convert.ToDouble(dis_temp[i, 1]);
Newton_L_temp = Latdev_lb.Lateral_TraCURVE_Dis(Chatra_lb.Rad, Chatra_lb.l0, x_temp, y_temp, N_L_L0, N_L_DETA); // 存储迭代次数及迭代值
for (int j = 0; j < 13; j++)
{
T_N_L_befQZc[befqzc, j] = Newton_L_temp[0, j];
}
l_temp = T_N_L_befQZc[befqzc, 0];
ListCalDevDa[befqzsl + befqzc].TAzi = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_jd12 + ListInfoDa[1].K * l_temp * l_temp / (2.0 * Chatra_lb.Rad * Chatra_lb.l0));
//
//=================================================================
ListCalDevDa[befqzsl + befqzc].Length = l_temp;
mileage_temp1 = jd_mileage - Chatra_lb.T + l_temp;
ListCalDevDa[befqzsl + befqzc].PMil = mileage_temp1;
func_singleone = Chatra_lb.CharaTrack_TangentxyT(Chatra_lb.l0, Chatra_lb.Rad, l_temp);
lx_temp = func_singleone[0, 0];
ly_temp = func_singleone[0, 1];
//=================================================================
//
if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) > Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (-1000.0 * ListInfoDa[1].K); // mm
}
else if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) < Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (1000.0 * ListInfoDa[1].K); // mm
}
else // 万一不在上述范围内,给出指示值以方便检查
{
ListCalDevDa[befqzsl + befqzc].VDevVal = 10000000000;
}
//
//=================================================================
func_singleone = Math_lb.Math_xytoXYFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], lx_temp, ly_temp, azimuth_jd12, ListInfoDa[1].K);
ListCalDevDa[befqzsl + befqzc].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl + befqzc].DY = func_singleone[0, 1];
//=================================================================
ListCalDevDa[befqzsl + befqzc].Poslabel = "FirstTransitionCurve"; // 位置标签
befqzc++;
}
else
{
ListCalDevDa[befqzsl + befqzc + befqzcc].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl + befqzc + befqzcc].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl + befqzc + befqzcc].Y = ListCzxDa[i].Y;
func_singleone = Math_lb.Math_XYtoxyFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], ListCzxDa[i].X, ListCzxDa[i].Y, azimuth_jd12, ListInfoDa[1].K);
x_temp = func_singleone[0, 0];
y_temp = func_singleone[0, 1];
ListCalDevDa[befqzsl + befqzc + befqzcc].TCorx = x_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc].TCory = y_temp;
if ((befqzcc == 0) && (i == 0))
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Math.Sqrt((ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) * (ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) + (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1]) * (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1])));
}
else
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Convert.ToDouble(dis_temp[i - 1, 1]) + Math.Sqrt((ListCzxDa[i].X - ListCzxDa[i - 1].X) * (ListCzxDa[i].X - ListCzxDa[i - 1].X) + (ListCzxDa[i].Y - ListCzxDa[i - 1].Y) * (ListCzxDa[i].Y - ListCzxDa[i - 1].Y)));
}
//=================================================================
//
l_temp = Latdev_lb.Lateral_CirCURVE(Chatra_lb.Rad, Chatra_lb.l0, Chatra_lb.beta0, Chatra_lb.m, Chatra_lb.p, x_temp, y_temp);
ListCalDevDa[befqzsl + befqzc + befqzcc].TAzi = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_HY + ListInfoDa[1].K * (l_temp - Chatra_lb.l0) / Chatra_lb.Rad);
//
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc].Length = l_temp;
mileage_temp1 = jd_mileage - Chatra_lb.T + l_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc].PMil = mileage_temp1;
func_singleone = Chatra_lb.CharaTrack_TangentxyC(Chatra_lb.l0, Chatra_lb.Rad, l_temp, ListInfoDa[1].erfa);
lx_temp = func_singleone[0, 0];
ly_temp = func_singleone[0, 1];
//=================================================================
//
if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) > Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (-1000.0 * ListInfoDa[1].K); // mm
}
else if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) < Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (1000.0 * ListInfoDa[1].K); // mm
}
else // 万一不在上述范围内,给出指示值以方便检查
{
ListCalDevDa[befqzsl + befqzc + befqzcc].VDevVal = 10000000000;
}
//
//=================================================================
func_singleone = Math_lb.Math_xytoXYFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], lx_temp, ly_temp, azimuth_jd12, ListInfoDa[1].K);
ListCalDevDa[befqzsl + befqzc + befqzcc].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl + befqzc + befqzcc].DY = func_singleone[0, 1];
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc].Poslabel = "CircularCurve"; // 位置标签
befqzcc++;
}
}
}
else if (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23) < Math_lb.Math_ANGLE(azimuth_JQ, azimuth_jd23)) // 若测点不在内侧，其与JD23方向的夹角也不会超过偏转角的1/2
{
angle_temp = Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23);
if ((d_temp * (Math.Cos(angle_temp))) >= Chatra_lb.T)
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].Y = ListCzxDa[i].Y;
mileage_temp1 = jd_mileage + d_temp * (Math.Cos(angle_temp)) - Chatra_lb.q;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].PMil = mileage_temp1; // 里程
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].Length = d_temp * Math.Cos(angle_temp) - Chatra_lb.T;
lx_temp = -(d_temp * (Math.Cos(angle_temp)) - Chatra_lb.T);
ly_temp = 0.0;
func_singleone = Math_lb.Math_xytoXYSCoordinateTransformation(Chatra_lb.HZ_XY[0, 0], Chatra_lb.HZ_XY[0, 1], lx_temp, ly_temp, azimuth_jd32, ListInfoDa[1].K);
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].DY = func_singleone[0, 1];
if ((Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23)) && (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23))) // 判断实测点是否在JD(i)到JD(i-1)与JD(i)到JD(i+1)所组成的夹角之间
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].VDevVal = 1000.0 * d_temp * (Math.Sin(angle_temp)); // mm
}
else
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].VDevVal = -1000.0 * d_temp * (Math.Sin(angle_temp)); // mm
}
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].TAzi = azimuth_jd23;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc + aftqzsl].Poslabel = "Line"; // 位置标签
aftqzsl++;
}
else
{
if ((Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd21)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23)) && (Math_lb.Math_ANGLE(azimuth_temp, azimuth_jd23)) < (Math_lb.Math_ANGLE(azimuth_jd21, azimuth_jd23)))//判断实测点是否在JD(i)到JD(i-1)与JD(i)到JD(i+1)所组成的夹角之间
{
jdH_temp = (Chatra_lb.T - Chatra_lb.YH_xy[0, 0] - Chatra_lb.YH_xy[0, 1] * (Math.Tan(Chatra_lb.beta0))) * (Math.Sin((Math.PI / 2.0) + Chatra_lb.beta0)) / (Math.Sin((Math.PI / 2.0) - angle_temp - Chatra_lb.beta0));
}
else
{
jdH_temp = (Chatra_lb.T - Chatra_lb.YH_xy[0, 0] - Chatra_lb.YH_xy[0, 1] * (Math.Tan(Chatra_lb.beta0))) * (Math.Sin((Math.PI / 2.0) - Chatra_lb.beta0)) / (Math.Sin((Math.PI / 2.0) - angle_temp + Chatra_lb.beta0));
}
if (d_temp > jdH_temp)
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].Y = ListCzxDa[i].Y;
func_singleone = Math_lb.Math_XYtoxySCoordinateTransformation(Chatra_lb.HZ_XY[0, 0], Chatra_lb.HZ_XY[0, 1], ListCzxDa[i].X, ListCzxDa[i].Y, azimuth_jd32, ListInfoDa[1].K);
x_temp = func_singleone[0, 0];
y_temp = func_singleone[0, 1];
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].TCorx = x_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].TCory = y_temp; // 计算测点切线坐标系下坐标
if (aftqzc == 0)
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Math.Sqrt((ListCzxDa[i].X - Chatra_lb.YH_XY[0, 0]) * (ListCzxDa[i].X - Chatra_lb.YH_XY[0, 0]) + (ListCzxDa[i].Y - Chatra_lb.YH_XY[0, 1]) * (ListCzxDa[i].Y - Chatra_lb.YH_XY[0, 1])));
}
else
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Convert.ToDouble(dis_temp[i - 1, 1]) + Math.Sqrt((ListCzxDa[i].X - ListCzxDa[i - 1].X) * (ListCzxDa[i].X - ListCzxDa[i - 1].X) + (ListCzxDa[i].Y - ListCzxDa[i - 1].Y) * (ListCzxDa[i].Y - ListCzxDa[i - 1].Y)));
}
//=================================================================
//
N_L_L0 = Chatra_lb.l0 - Convert.ToDouble(dis_temp[i, 1]);
Newton_L_temp = Latdev_lb.Lateral_TraCURVE_Dis(Chatra_lb.Rad, Chatra_lb.l0, x_temp, y_temp, N_L_L0, N_L_DETA);
for (int j = 0; j < 13; j++)
{
T_N_L_aftQZc[aftqzc, j] = Newton_L_temp[0, j];
}
l_temp = T_N_L_aftQZc[aftqzc, 0]; // 迭代值
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].TAzi = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_YH + ListInfoDa[1].K * ((Chatra_lb.l0 - l_temp) / Chatra_lb.Rad - (Chatra_lb.l0 - l_temp) * (Chatra_lb.l0 - l_temp) / (2.0 * Chatra_lb.Rad * Chatra_lb.l0)));
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].Length = l_temp; // 储存曲线长
mileage_temp1 = jd_mileage - Chatra_lb.T + Chatra_lb.L - l_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].PMil = mileage_temp1; // 计算里程
func_singleone = Chatra_lb.CharaTrack_TangentxyT(Chatra_lb.l0, Chatra_lb.Rad, l_temp);
lx_temp = func_singleone[0, 0];
ly_temp = func_singleone[0, 1];
//=================================================================
//
if (Math_lb.Math_AZIMUTH(ly_temp, lx_temp * ListInfoDa[1].K) > Math_lb.Math_AZIMUTH(y_temp, x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (1000.0 * ListInfoDa[1].K); // mm
}
else if (Math_lb.Math_AZIMUTH(ly_temp, lx_temp * ListInfoDa[1].K) < Math_lb.Math_AZIMUTH(y_temp, x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (-1000.0 * ListInfoDa[1].K); // mm
}
else // 万一不在上述范围内,给出指示值以方便检查
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].VDevVal = 10000000000;
}
//
//=================================================================
func_singleone = Math_lb.Math_xytoXYSCoordinateTransformation(Chatra_lb.HZ_XY[0, 0], Chatra_lb.HZ_XY[0, 1], lx_temp, ly_temp, azimuth_jd32, ListInfoDa[1].K);
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].DY = func_singleone[0, 1];
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc + aftqzc].Poslabel = "SecondTransitionCurve"; // 位置标签
aftqzc++;
}
else
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].Name = ListCzxDa[i].Name;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].X = ListCzxDa[i].X;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].Y = ListCzxDa[i].Y;
func_singleone = Math_lb.Math_XYtoxyFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], ListCzxDa[i].X, ListCzxDa[i].Y, azimuth_jd12, ListInfoDa[1].K);
x_temp = func_singleone[0, 0];
y_temp = func_singleone[0, 1];
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].TCorx = x_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].TCory = y_temp; // 计算测点切线坐标系下坐标
if ((aftqzcc == 0) && (i == 0))
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Math.Sqrt((ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) * (ListCzxDa[i].X - Chatra_lb.ZH_XY[0, 0]) + (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1]) * (ListCzxDa[i].Y - Chatra_lb.ZH_XY[0, 1])));
}
else
{
dis_temp[i, 0] = ListCzxDa[i].Name;
dis_temp[i, 1] = Convert.ToString(Convert.ToDouble(dis_temp[i - 1, 1]) + Math.Sqrt((ListCzxDa[i].X - ListCzxDa[i - 1].X) * (ListCzxDa[i].X - ListCzxDa[i - 1].X) + (ListCzxDa[i].Y - ListCzxDa[i - 1].Y) * (ListCzxDa[i].Y - ListCzxDa[i - 1].Y)));
}
//=================================================================
//
l_temp = Latdev_lb.Lateral_CirCURVE(Chatra_lb.Rad, Chatra_lb.l0, Chatra_lb.beta0, Chatra_lb.m, Chatra_lb.p, x_temp, y_temp);
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].TAzi = Math_lb.Math_ANGLEtoAZIMUTH(azimuth_HY + ListInfoDa[1].K * (l_temp - Chatra_lb.l0) / Chatra_lb.Rad);
//
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].Length = l_temp; // 曲线长
mileage_temp1 = jd_mileage - Chatra_lb.T + l_temp;
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].PMil = mileage_temp1;
func_singleone = Chatra_lb.CharaTrack_TangentxyC(Chatra_lb.l0, Chatra_lb.Rad, l_temp, ListInfoDa[1].erfa);
lx_temp = func_singleone[0, 0];
ly_temp = func_singleone[0, 1];
//=================================================================
//
if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) > Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (-1000.0 * ListInfoDa[1].K); // mm
}
else if (Math_lb.Math_AZIMUTH(ly_temp, -lx_temp * ListInfoDa[1].K) < Math_lb.Math_AZIMUTH(y_temp, -x_temp * ListInfoDa[1].K))
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].VDevVal = Math.Sqrt((lx_temp - x_temp) * (lx_temp - x_temp) + (ly_temp - y_temp) * (ly_temp - y_temp)) * (1000.0 * ListInfoDa[1].K); // mm
}
else // 万一不在上述范围内,给出指示值以方便检查
{
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].VDevVal = 10000000000;
}
//
//=================================================================
func_singleone = Math_lb.Math_xytoXYFCoordinateTransformation(Chatra_lb.ZH_XY[0, 0], Chatra_lb.ZH_XY[0, 1], lx_temp, ly_temp, azimuth_jd12, ListInfoDa[1].K);
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].DX = func_singleone[0, 0];
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].DY = func_singleone[0, 1];
//=================================================================
ListCalDevDa[befqzsl + befqzc + befqzcc + aftqzcc].Poslabel = "CircularCurve"; // 位置标签
aftqzcc++;
}
}
}
}
double[,] N_L_befQZc = new double[befqzc, 13]; // 存储迭代次数及值*******
double[,] N_L_aftQZc = new double[aftqzc, 13];
for (int i = 0; i < befqzc; i++)
{
for (int j = 0; j < 13; j++)
{
N_L_befQZc[i, j] = T_N_L_befQZc[i, j];
}
}
for (int i = 0; i < aftqzc; i++)
{
for (int j = 0; j < 13; j++)
{
N_L_aftQZc[i, j] = T_N_L_aftQZc[i, j];
}
}
return(ListCalDevDa);
}
public StringBuilder OutReport(List <InfoData> ListInfoData, List <CalDevData> ListCalDevDa)
{
Mathematics_lb Math_lb = new Mathematics_lb();
CharacteristicTrack_lb Chatra_lb = new CharacteristicTrack_lb();
LateralDeviationSet_lb Latdev_lb = new LateralDeviationSet_lb();
StringBuilder stringBuilder = new StringBuilder();
stringBuilder.Append("\r\n");
stringBuilder.Append("***********************************************************计算报告***********************************************************\r\n");
stringBuilder.Append("\r\n");
stringBuilder.Append("********************************曲线基本信息*********************************\r\n");
stringBuilder.Append("\r\n");
Chatra_lb.l0 = ListInfoData[1].l0; // 缓和曲线
Chatra_lb.Rad = ListInfoData[1].Rad; // 半径
Chatra_lb.erfa = Chatra_lb.ERFAFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.beta0 = Chatra_lb.BRTA0Fun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.m = Chatra_lb.MFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.p = Chatra_lb.PFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.T = Chatra_lb.TFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.L = Chatra_lb.LFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.E0 = Chatra_lb.E0Fun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
Chatra_lb.q = Chatra_lb.QFun(ListInfoData[1].erfa, Chatra_lb.l0, Chatra_lb.Rad);
// 曲线参数显示
string[] obj1 = new string[33];
obj1[0] = "交点名称：";
obj1[1] = ListInfoData[1].Name;
obj1[2] = "\n";
obj1[3] = "线路偏向角α(°.′ ″)：";
obj1[4] = ListInfoData[1].erfa.ToString("0.000");
obj1[5] = "\n";
obj1[6] = "圆曲线半径R：";
obj1[7] = Chatra_lb.Rad.ToString("0.000");
obj1[8] = "\n";
obj1[9] = "缓和曲线长l0：";
obj1[10] = Chatra_lb.l0.ToString("0.000");
obj1[11] = "\n";
obj1[12] = "缓和曲线切线角β0：";
obj1[13] = Chatra_lb.beta0.ToString("0.000");
obj1[14] = "\n";
obj1[15] = "切垂距m：";
obj1[16] = Chatra_lb.m.ToString("0.000");
obj1[17] = "\n";
obj1[18] = "圆曲线内移量p：";
obj1[19] = Chatra_lb.p.ToString("0.000");
obj1[20] = "\n";
obj1[21] = "切线长T：";
obj1[22] = Chatra_lb.T.ToString("0.000");
obj1[23] = "\n";
obj1[24] = "曲线长L：";
obj1[25] = Chatra_lb.L.ToString("0.000");
obj1[26] = "\n";
obj1[27] = "外矢距E0：";
obj1[28] = Chatra_lb.E0.ToString("0.000");
obj1[29] = "\n";
obj1[30] = "切曲差q：";
obj1[31] = Chatra_lb.q.ToString("0.000");
obj1[32] = "\n";
stringBuilder.Append(string.Concat(obj1));
stringBuilder.Append("\r\n");
stringBuilder.Append("********************************************实测点设计位置及对应横向偏差计算结果*********************************************\r\n");
stringBuilder.Append("\r\n");
stringBuilder.Append("点名\t\tX(设计)\t\t\tY(设计)\t\t\t里程(m)\t\t横向偏差(mm)\t\t标签\r\n");
for (int i = 0; i < ListCalDevDa.Count; i++)
{
StringBuilder stringBuilder2 = stringBuilder;
string[] obj2 = new string[12];
obj2[0] = ListCalDevDa[i].Name;
obj2[1] = ",\t\t";
obj2[2] = ListCalDevDa[i].DX.ToString("0.0000");
obj2[3] = ",\t\t";
obj2[4] = ListCalDevDa[i].DY.ToString("0.0000");
obj2[5] = ",\t\t";
obj2[6] = ListCalDevDa[i].PMil.ToString("0.0000");
obj2[7] = ",\t";
obj2[8] = ListCalDevDa[i].VDevVal.ToString("0.00");
obj2[9] = ",\t\t\t";
obj2[10] = ListCalDevDa[i].Poslabel;
obj2[11] = "\n";
stringBuilder2.Append(string.Concat(obj2));
}
stringBuilder.Append("\r\n");
stringBuilder.Append("**************************************************************END**************************************************************\r\n");
return(stringBuilder);
}
