public void ChangeToMacroDetail(CustomCommands macro = null)
{
this.ActiveMacro = macro;
UiThread.RunOnIdle(DoChangeToMacroDetail);
}
public MacroListWidget(EditMacrosWindow windowController)
{
this.windowController = windowController;
linkButtonFactory.fontSize = 10;
FlowLayoutWidget topToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom);
topToBottom.AnchorAll();
topToBottom.Padding = new BorderDouble(3, 0, 3, 5);
FlowLayoutWidget headerRow = new FlowLayoutWidget(FlowDirection.LeftToRight);
headerRow.HAnchor = HAnchor.ParentLeftRight;
headerRow.Margin = new BorderDouble(0, 3, 0, 0);
headerRow.Padding = new BorderDouble(0, 3, 0, 3);
{
string macroPresetsLabel = LocalizedString.Get("Macro Presets");
string macroPresetsLabelFull = string.Format("{0}:", macroPresetsLabel);
TextWidget elementHeader = new TextWidget(macroPresetsLabelFull, pointSize: 14);
elementHeader.TextColor = ActiveTheme.Instance.PrimaryTextColor;
elementHeader.HAnchor = HAnchor.ParentLeftRight;
elementHeader.VAnchor = Agg.UI.VAnchor.ParentBottom;
headerRow.AddChild(elementHeader);
}
topToBottom.AddChild(headerRow);
FlowLayoutWidget presetsFormContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
{
presetsFormContainer.HAnchor = HAnchor.ParentLeftRight;
presetsFormContainer.VAnchor = VAnchor.ParentBottomTop;
presetsFormContainer.Padding = new BorderDouble(3);
presetsFormContainer.BackgroundColor = ActiveTheme.Instance.SecondaryBackgroundColor;
}
topToBottom.AddChild(presetsFormContainer);
IEnumerable <DataStorage.CustomCommands> macroList = GetMacros();
foreach (DataStorage.CustomCommands currentCommand in macroList)
{
FlowLayoutWidget macroRow = new FlowLayoutWidget();
macroRow.Margin = new BorderDouble(3, 0, 3, 3);
macroRow.HAnchor = Agg.UI.HAnchor.ParentLeftRight;
macroRow.Padding = new BorderDouble(3);
macroRow.BackgroundColor = RGBA_Bytes.White;
TextWidget buttonLabel = new TextWidget(currentCommand.Name);
macroRow.AddChild(buttonLabel);
FlowLayoutWidget hSpacer = new FlowLayoutWidget();
hSpacer.HAnchor = Agg.UI.HAnchor.ParentLeftRight;
macroRow.AddChild(hSpacer);
Button editLink = linkButtonFactory.Generate(LocalizedString.Get("edit"));
editLink.Margin = new BorderDouble(right: 5);
// You can't pass a foreach variable into a link function or it wall always be the last item.
// So we make a local variable copy of it and pass that. This will get the right one.
DataStorage.CustomCommands currentCommandForLinkFunction = currentCommand;
editLink.Click += (sender, e) =>
{
windowController.ChangeToMacroDetail(currentCommandForLinkFunction);
};
macroRow.AddChild(editLink);
Button removeLink = linkButtonFactory.Generate(LocalizedString.Get("remove"));
removeLink.Click += (sender, e) =>
{
currentCommandForLinkFunction.Delete();
windowController.functionToCallOnSave(this, null);
windowController.ChangeToMacroList();
};
macroRow.AddChild(removeLink);
presetsFormContainer.AddChild(macroRow);
}
Button addMacroButton = textImageButtonFactory.Generate(LocalizedString.Get("Add"), "icon_circle_plus.png");
addMacroButton.Click += new ButtonBase.ButtonEventHandler(addMacro_Click);
Button cancelPresetsButton = textImageButtonFactory.Generate(LocalizedString.Get("Close"));
cancelPresetsButton.Click += (sender, e) => {
UiThread.RunOnIdle((state) =>
{
this.windowController.Close();
});
};
FlowLayoutWidget buttonRow = new FlowLayoutWidget();
buttonRow.HAnchor = HAnchor.ParentLeftRight;
buttonRow.Padding = new BorderDouble(0, 3);
GuiWidget hButtonSpacer = new GuiWidget();
hButtonSpacer.HAnchor = HAnchor.ParentLeftRight;
buttonRow.AddChild(addMacroButton);
buttonRow.AddChild(hButtonSpacer);
buttonRow.AddChild(cancelPresetsButton);
topToBottom.AddChild(buttonRow);
AddChild(topToBottom);
this.AnchorAll();
}
public void ChangeToMacroList()
{
this.ActiveMacro = null;
UiThread.RunOnIdle(DoChangeToMacroList);
}
public void LoadSetupSettings(string make, string model)
{
Dictionary<string, string> settingsDict = LoadPrinterSetupFromFile(make, model);
Dictionary<string, string> macroDict = new Dictionary<string, string>();
macroDict["Lights On"] = "M42 P6 S255";
macroDict["Lights Off"] = "M42 P6 S0";
macroDict["Offset 0.8"] = "M565 Z0.8;\nM500";
macroDict["Offset 0.9"] = "M565 Z0.9;\nM500";
macroDict["Offset 1"] = "M565 Z1;\nM500";
macroDict["Offset 1.1"] = "M565 Z1.1;\nM500";
macroDict["Offset 1.2"] = "M565 Z1.2;\nM500";
macroDict["Z Offset"] = "G1 Z10;\nG28;\nG29;\nG1 Z10;\nG1 X5 Y5 F4000;\nM117;";
//Determine if baud rate is needed and show controls if required
string baudRate;
if (settingsDict.TryGetValue("baud_rate", out baudRate))
{
ActivePrinter.BaudRate = baudRate;
}
string defaultSliceEngine;
if (settingsDict.TryGetValue("default_slice_engine", out defaultSliceEngine))
{
if (Enum.IsDefined(typeof(ActivePrinterProfile.SlicingEngineTypes), defaultSliceEngine))
{
ActivePrinter.CurrentSlicingEngine = defaultSliceEngine;
}
}
string defaultPrinterDriver;
if (settingsDict.TryGetValue("driver_type", out defaultPrinterDriver))
{
ActivePrinter.DriverType = defaultPrinterDriver;
}
settingsDict.TryGetValue("default_material_presets", out defaultMaterialPreset);
settingsDict.TryGetValue("default_quality_preset", out defaultQualityPreset);
settingsDict.TryGetValue("default_movement_speeds", out defaultMovementSpeeds);
string defaultMacros;
printerCustomCommands = new List<CustomCommands>();
if (settingsDict.TryGetValue("default_macros", out defaultMacros))
{
string[] macroList = defaultMacros.Split(',');
foreach (string macroName in macroList)
{
string macroValue;
if (macroDict.TryGetValue(macroName.Trim(), out macroValue))
{
CustomCommands customMacro = new CustomCommands();
customMacro.Name = macroName.Trim();
customMacro.Value = macroValue;
printerCustomCommands.Add(customMacro);
}
}
}
//Determine what if any drivers are needed
string infFileNames;
if (settingsDict.TryGetValue("windows_driver", out infFileNames))
{
string[] fileNames = infFileNames.Split(',');
foreach (string fileName in fileNames)
{
switch (OsInformation.OperatingSystem)
{
case OSType.Windows:
string pathForInf = Path.GetFileNameWithoutExtension(fileName);
// TODO: It's really unexpected that the driver gets copied to the temp folder everytime a printer is setup. I'd think this only needs
// to happen when the infinstaller is run (More specifically - move this to *after* the user clicks Install Driver)
string infPath = Path.Combine("Drivers", pathForInf);
string infPathAndFileToInstall = Path.Combine(infPath, fileName);
if (StaticData.Instance.FileExists(infPathAndFileToInstall))
{
// Ensure the output directory exists
string destTempPath = Path.GetFullPath(Path.Combine(ApplicationDataStorage.ApplicationUserDataPath, "data", "temp", "inf", pathForInf));
if (!Directory.Exists(destTempPath))
{
Directory.CreateDirectory(destTempPath);
}
string destTempInf = Path.GetFullPath(Path.Combine(destTempPath, fileName));
// Sync each file from StaticData to the location on disk for serial drivers
foreach (string file in StaticData.Instance.GetFiles(infPath))
{
using (Stream outstream = File.OpenWrite(Path.Combine(destTempPath, Path.GetFileName(file))))
using (Stream instream = StaticData.Instance.OpenSteam(file))
{
instream.CopyTo(outstream);
}
}
DriversToInstall.Add(destTempInf);
}
break;
default:
break;
}
}
}
}
public void ChangeToMacroDetail(CustomCommands macro = null)
{
this.ActiveMacro = macro;
UiThread.RunOnIdle(DoChangeToMacroDetail);
}
public void ChangeToMacroList()
{
this.ActiveMacro = null;
UiThread.RunOnIdle(DoChangeToMacroList);
}
private void LoadSetupSettings(string make, string model)
{
Dictionary<string, string> settingsDict = LoadPrinterSetupFromFile(make, model);
Dictionary<string, string> macroDict = new Dictionary<string, string>();
macroDict["Lights On"] = "M42 P6 S255";
macroDict["Lights Off"] = "M42 P6 S0";
//Determine if baud rate is needed and show controls if required
string baudRate;
if (settingsDict.TryGetValue("baud_rate", out baudRate))
{
ActivePrinter.BaudRate = baudRate;
}
string defaultSliceEngine;
if (settingsDict.TryGetValue("default_slice_engine", out defaultSliceEngine))
{
if (Enum.IsDefined(typeof(ActivePrinterProfile.SlicingEngineTypes), defaultSliceEngine))
{
ActivePrinter.CurrentSlicingEngine = defaultSliceEngine;
}
}
string defaultMacros;
printerCustomCommands = new List<CustomCommands>();
if (settingsDict.TryGetValue("default_macros", out defaultMacros))
{
string[] macroList = defaultMacros.Split(',');
foreach (string macroName in macroList)
{
string macroValue;
if (macroDict.TryGetValue(macroName.Trim(), out macroValue))
{
CustomCommands customMacro = new CustomCommands();
customMacro.Name = macroName.Trim();
customMacro.Value = macroValue;
printerCustomCommands.Add(customMacro);
}
}
}
//Determine what if any drivers are needed
if (settingsDict.TryGetValue("windows_driver", out driverFile))
{
string infPathAndFileToInstall = Path.Combine(ApplicationDataStorage.Instance.ApplicationStaticDataPath, "Drivers", driverFile);
switch (MatterHackers.Agg.UI.WindowsFormsAbstract.GetOSType())
{
case Agg.UI.WindowsFormsAbstract.OSType.Windows:
if (File.Exists(infPathAndFileToInstall))
{
PrinterSetupStatus.DriverNeedsToBeInstalled = true;
PrinterSetupStatus.DriverFilePath = infPathAndFileToInstall;
}
break;
default:
break;
}
}
}
private void LoadSetupSettings(string make, string model)
{
Dictionary<string, string> settingsDict = LoadPrinterSetupFromFile(make, model);
Dictionary<string, string> macroDict = new Dictionary<string, string>();
macroDict["Lights On"] = "M42 P6 S255";
macroDict["Lights Off"] = "M42 P6 S0";
//Determine if baud rate is needed and show controls if required
string baudRate;
if (settingsDict.TryGetValue("baud_rate", out baudRate))
{
ActivePrinter.BaudRate = baudRate;
}
// Check if we need to run the print level wizard before printing
PrintLevelingData levelingData = PrintLevelingData.GetForPrinter(ActivePrinter);
string needsPrintLeveling;
if (settingsDict.TryGetValue("needs_print_leveling", out needsPrintLeveling))
{
levelingData.needsPrintLeveling = true;
}
string printLevelingType;
if (settingsDict.TryGetValue("print_leveling_type", out printLevelingType))
{
levelingData.levelingSystem = PrintLevelingData.LevelingSystem.Probe2Points;
}
string defaultSliceEngine;
if (settingsDict.TryGetValue("default_slice_engine", out defaultSliceEngine))
{
if (Enum.IsDefined(typeof(ActivePrinterProfile.SlicingEngineTypes), defaultSliceEngine))
{
ActivePrinter.CurrentSlicingEngine = defaultSliceEngine;
}
}
settingsDict.TryGetValue("default_material_presets", out defaultMaterialPreset);
settingsDict.TryGetValue("default_quality_preset", out defaultQualityPreset);
settingsDict.TryGetValue("default_movement_speeds", out defaultMovementSpeeds);
string defaultMacros;
printerCustomCommands = new List<CustomCommands>();
if (settingsDict.TryGetValue("default_macros", out defaultMacros))
{
string[] macroList = defaultMacros.Split(',');
foreach (string macroName in macroList)
{
string macroValue;
if (macroDict.TryGetValue(macroName.Trim(), out macroValue))
{
CustomCommands customMacro = new CustomCommands();
customMacro.Name = macroName.Trim();
customMacro.Value = macroValue;
printerCustomCommands.Add(customMacro);
}
}
}
//Determine what if any drivers are needed
if (settingsDict.TryGetValue("windows_driver", out driverFile))
{
string infPathAndFileToInstall = Path.Combine(ApplicationDataStorage.Instance.ApplicationStaticDataPath, "Drivers", driverFile);
switch (OsInformation.OperatingSystem)
{
case OSType.Windows:
if (File.Exists(infPathAndFileToInstall))
{
PrinterSetupStatus.DriverNeedsToBeInstalled = true;
PrinterSetupStatus.DriverFilePath = infPathAndFileToInstall;
}
break;
default:
break;
}
}
}
