private static void UpdateButton()
{
if (m_iStep != EN_SEQ_STEP.Idle)
{
InspectHomeDone();
if (!OM.CmnOptn.bIgnrDoor)
{
InspectDoor();
}
}
//Local Var.
bool isErr = ML.ER_IsErr();
bool isHomeEnd = ML.MT_GetHomeDoneAll();
//vision manual button.
//CDelayTimer tmVisnCycle ;
//if(IO_GetX(xETC_LStopSw)&& m_iSeqStat == ssStop ){
//if(tmVisnCycle.OnDelay(true , 1000)) {
// tmVisnCycle.Clear();
// if(MM.GetManNo() == mcNoneCycle) {
// MM.SetManCycle(mcVSN_CycleWork);
// }
//}
//}
//else {
//tmVisnCycle.Clear();
//}
bool bStartSw = ML.IO_GetXUp(xi.ETC_LStartSw) || ML.IO_GetXUp(xi.ETC_RStartSw) || m_bBtnStart; // || ML.IO_GetXUp(xi.ETC_StartSwR) || m_bBtnStart ;
bool bStopSw = ML.IO_GetXUp(xi.ETC_LStopSw) || ML.IO_GetXUp(xi.ETC_RStopSw) || m_bBtnStop; // || ML.IO_GetXUp(xi.ETC_StopSwR ) || m_bBtnStop ;
bool bResetSw = ML.IO_GetXUp(xi.ETC_LResetSw) || ML.IO_GetXUp(xi.ETC_RResetSw) || m_bBtnReset; // || ML.IO_GetXUp(xi.ETC_ResetSwR) || m_bBtnReset ;
bool bAirSw = ML.IO_GetXUp(xi.ETC_LAirSw) || ML.IO_GetXUp(xi.ETC_RAirSw) || m_bBtnAir;
bool bInitSw = ML.IO_GetXUp(xi.ETC_LInitSw) || ML.IO_GetXUp(xi.ETC_RInitSw);
bool bVisnSw = ML.IO_GetXUp(xi.ETC_LVisnSw) || ML.IO_GetXUp(xi.ETC_RVisnSw);
if (m_bBtnStart)
{
Log.Trace("m_bBtnStart", "true");
}
if (bStartSw)
{
Log.Trace("bStartSw", "Started");
if (MM.GetManNo() != (int)mc.NoneCycle)
{
Log.Trace("ManCycle", string.Format(MM.GetManNo().ToString()));
bStartSw = false;
}
}
//Update Switch's Lamp
bool bStopBtnFlick = (m_iStep == EN_SEQ_STEP.ToStopCon || m_iStep == EN_SEQ_STEP.ToStop) && m_bFlick;
//버튼 클릭시나
ML.IO_SetY(yi.ETC_LStartLp, ML.IO_GetX(xi.ETC_LStartSw) || m_bRun);
ML.IO_SetY(yi.ETC_RStartLp, ML.IO_GetX(xi.ETC_RStartSw) || m_bRun);
ML.IO_SetY(yi.ETC_LStopLp, ML.IO_GetX(xi.ETC_LStopSw) || !m_bRun || bStopBtnFlick);
ML.IO_SetY(yi.ETC_RStopLp, ML.IO_GetX(xi.ETC_RStopSw) || !m_bRun || bStopBtnFlick);
ML.IO_SetY(yi.ETC_LResetLp, ML.IO_GetX(xi.ETC_LResetSw) || (m_bFlick && isErr));
ML.IO_SetY(yi.ETC_RResetLp, ML.IO_GetX(xi.ETC_RResetSw) || (m_bFlick && isErr));
ML.IO_SetY(yi.ETC_LAirLp, ML.IO_GetX(xi.ETC_LAirSw) || ML.IO_GetY(yi.ETC_MainAirOnOff));
ML.IO_SetY(yi.ETC_RAirLp, ML.IO_GetX(xi.ETC_RAirSw) || ML.IO_GetY(yi.ETC_MainAirOnOff));
ML.IO_SetY(yi.ETC_LInitLp, ML.IO_GetX(xi.ETC_LInitSw));
ML.IO_SetY(yi.ETC_RInitLp, ML.IO_GetX(xi.ETC_RInitSw));
ML.IO_SetY(yi.ETC_LVisnLp, ML.IO_GetX(xi.ETC_LVisnSw));
ML.IO_SetY(yi.ETC_RVisnLp, ML.IO_GetX(xi.ETC_RVisnSw));
//Center Man Button
m_bBtnStart = false;
m_bBtnStop = false;
m_bBtnReset = false;
m_bBtnAir = false;
//Init. Button Flags.
if (bStartSw)
{
if (!isHomeEnd)
{
Log.ShowMessage("Error", "Machine Needed Initial"); bStartSw = false;
}
if (!LOT.GetLotOpen() && LOT.GetNextMgz() == "")
{
Log.ShowMessage("Error", "Machine Need to Lot "); bStartSw = false;
} //기존 랏오픈 패턴
//if(LOT.GetNextMgz()=="") { Log.ShowMessage("Error" , "Machine Needed Lot List Registration" ); bStartSw = false ; } //기존 랏오픈 패턴
if (m_iSeqStat == EN_SEQ_STAT.WorkEnd || m_iSeqStat == EN_SEQ_STAT.RunWarn)
{
Reset();
}
}
if (bInitSw)
{
if (!ML.IO_GetY(yi.ETC_MainAirOnOff))
{
ML.ER_SetErr(ei.ETC_MainAir, "Check Main Air");
return;
}
MM.SetManCycle(mc.AllHome);
}
//Vision버튼 추가. 진섭
if (bVisnSw)
{
if (!isHomeEnd)
{
Log.ShowMessage("Error", "Machine Needed Initial");
//ML.ER_SetErr(ei.MTR_HomeEnd, "Machine Needed Initial");
return;
}
if (m_iSeqStat == EN_SEQ_STAT.Running || m_iSeqStat == EN_SEQ_STAT.Manual)
{
Log.ShowMessage("Error", "Machine is not stopped.");
//ML.ER_SetErr(ei.)
return;
}
MM.SetManCycle(mc.VSNZ_Insp);
}
//Air Switch.
if (bAirSw && !m_bRun && m_iSeqStat != EN_SEQ_STAT.Init)
{
ML.IO_SetY(yi.ETC_MainAirOnOff, !ML.IO_GetY(yi.ETC_MainAirOnOff));
}
//Buzzer Off.
if (isErr && bStopSw)
{
ML.TL_SetBuzzOff(true);
}
//Set Condition Flags.
if (bStartSw) //스타트버튼 안눌리는것 때문에 테스트.
{
Log.Trace("isErr", isErr ? "true":"false");
Log.Trace("ManualMan.GetManNo()", string.Format(MM.GetManNo().ToString()));
}
if (bStopSw)
{
if (!_bRun && !MM.Working())
{
ML.IO_SetY(yi.RAIL_FeedingAC1, false);
ML.IO_SetY(yi.RAIL_FeedingAC2, false);
ML.IO_SetY(yi.RAIL_FeedingAC3, false);
}
MM.Stop = true;
Log.Trace("Stop", "Stop");
}
bool isStopCon = bStopSw || (isErr && !m_bReqStop && m_bRun);
bool isRunCon = bStartSw && !isErr /*&& ManualMan.GetManNo() == mcNone*/;
bool isResetCon = bResetSw && !m_bRun;
//Run.
if (isRunCon && (m_iStep == EN_SEQ_STEP.Idle))
{
m_iStep = EN_SEQ_STEP.ToStartCon;
ML.TL_SetBuzzOff(false);
ML.ER_SetDisp(true);
}
if (isRunCon && (m_iStep == EN_SEQ_STEP.Idle)) //스타트버튼 안눌리는것 때문에 테스트.
{
Log.Trace("isRunCon && m_iStep", string.Format(m_iStep.ToString()));
}
if (isStopCon && (m_iStep != EN_SEQ_STEP.Idle)) //스타트버튼 안눌리는것 때문에 테스트.
{
Log.Trace("isStopCon && m_iStep", string.Format(m_iStep.ToString()));
Log.Trace("bStopSw", bStopSw ? "True" : "False");
Log.Trace("isErr", isErr ? "True" : "False");
Log.Trace("m_bReqStop", m_bReqStop ? "True" : "False");
Log.Trace("m_bRun", m_bRun ? "True" : "False");
m_bReqStop = true;
}
if (isResetCon && (m_iStep == EN_SEQ_STEP.Idle))
{
Reset();
}
if (m_tmToStrt.OnDelay(m_iStep == EN_SEQ_STEP.ToStartCon || m_iStep == EN_SEQ_STEP.ToStart, 10000))
{
//Trace Log.
string Msg;
Msg = string.Format("ToStrtTimeOut : m_iStep=", m_iStep.ToString());
Log.Trace("SEQ", Msg);
ML.ER_SetErr(ei.ETC_ToStartTO);
m_iStep = EN_SEQ_STEP.Idle;
m_bRun = false;
}
//CDelayTimer StopBtn = null;
//StopBtn = new CDelayTimer();
//if(m_iStep == EN_SEQ_STEP.scToStopCon)
//{
// if(StopBtn.OnDelay(ML.IO_GetX((int)IP.xETC_StopSw)||ML.IO_GetX((int)IP.xETC_StopSw) , 5000))
// {
// Log.Trace("SEQ","Forced Stop");
// m_bRun = false ;
// m_iStep = EN_SEQ_STEP.scIdle;
// m_bReqStop = false;
// }
//}
//else
//{
// StopBtn.Clear();
//}
bool bVisnInsp = VSNZ.GetSeqStep() == (int)VisnZone.sc.Insp;
if (m_tmToStop.OnDelay((m_iStep == EN_SEQ_STEP.ToStopCon || m_iStep == EN_SEQ_STEP.ToStop) && !bVisnInsp, 10000))
{
//Trace Log.
string Msg;
Msg = string.Format("ToStopTimeOut : m_iStep=", m_iStep.ToString());
Log.Trace("SEQ", Msg);
m_bRun = false;
ML.ER_SetErr(ei.ETC_ToStopTO);
m_iStep = EN_SEQ_STEP.Idle;
m_bReqStop = false;
}
EN_SEQ_STEP iPreStep = m_iStep;
if (iPreStep != m_iStep)
{
string sMsg = "";
sMsg = "Step Changed" + string.Format(iPreStep.ToString()) + " -> " + string.Format(m_iStep.ToString());
Log.Trace("SEQ", sMsg);
}
iPreStep = m_iStep;
//이상하게 중간에 랏엔드가 되는 현상 발견해서 넣어둠.
bool bPreLotEnd = LOT.GetLotEnd();
if (LOT.GetLotEnd() != bPreLotEnd)
{
Log.Trace("SEQ", LOT.GetLotEnd() ? "LotEnd True" : "LotEnd False");
}
bPreLotEnd = LOT.GetLotEnd();
//Running Step.
switch (m_iStep)
{
case EN_SEQ_STEP.Idle:
return;
case EN_SEQ_STEP.ToStartCon:
if (!ToStartCon())
{
return;
}
m_iStep = EN_SEQ_STEP.ToStart;
Log.Trace("SEQ", "scToStartCon END");
return;
case EN_SEQ_STEP.ToStart:
if (!ToStart())
{
return;
}
m_bRun = true;
m_bRunEdge = true;
m_iStep = EN_SEQ_STEP.Run;
Log.Trace("SEQ", "scToStart END");
return;
case EN_SEQ_STEP.Run:
if (!m_bReqStop)
{
if (Autorun())
{
//랏엔드 상황.
LOT.LotEnd();
Log.ShowMessage("Checked", "Lot Ended.");
Log.Trace("SEQ", LOT.GetLotNo() + "LotEnd");
m_bRunEnd = true;
m_iStep = EN_SEQ_STEP.ToStopCon;
}
return;
}
m_bReqStop = false;
m_iStep = EN_SEQ_STEP.ToStopCon;
Log.Trace("SEQ", "scRun END");
return;
case EN_SEQ_STEP.ToStopCon:
if (!ToStopCon())
{
if (Autorun())
{
//랏엔드 상황.
LOT.LotEnd();
Log.Trace("SEQ", "scToStopCon LotEnd");
}
return;
}
m_bRun = false;
m_iStep = EN_SEQ_STEP.ToStop;
Log.Trace("SEQ", "scToStopCon END");
return;
case EN_SEQ_STEP.ToStop:
if (!ToStop())
{
return;
}
m_iStep = EN_SEQ_STEP.Idle;
m_bReqStop = false;
DM.SaveMap();
Log.Trace("SEQ", "scToStop END");
return;
}
}