/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client message.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_ClientMessage owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pOwner = owner;
m_pPop3Client = owner.m_Pop3Client;
SetState(AsyncOP_State.Active);
try{
/* RFC 1939 5. RETR
Arguments:
a message-number (required) which may NOT refer to a
message marked as deleted
Restrictions:
may only be given in the TRANSACTION state
Discussion:
If the POP3 server issues a positive response, then the
response given is multi-line. After the initial +OK, the
POP3 server sends the message corresponding to the given
message-number, being careful to byte-stuff the termination
character (as with all multi-line responses).
Possible Responses:
+OK message follows
-ERR no such message
Examples:
C: RETR 1
S: +OK 120 octets
S: <the POP3 server sends the entire message here>
S: .
*/
byte[] buffer = Encoding.UTF8.GetBytes("RETR " + owner.SequenceNumber.ToString() + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"RETR " + owner.SequenceNumber.ToString());
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.RetrCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client message.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_ClientMessage owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pOwner = owner;
m_pPop3Client = owner.m_Pop3Client;
SetState(AsyncOP_State.Active);
try{
/* RFC 1939 7. TOP
Arguments:
a message-number (required) which may NOT refer to to a
message marked as deleted, and a non-negative number
of lines (required)
Restrictions:
may only be given in the TRANSACTION state
Discussion:
If the POP3 server issues a positive response, then the
response given is multi-line. After the initial +OK, the
POP3 server sends the headers of the message, the blank
line separating the headers from the body, and then the
number of lines of the indicated message's body, being
careful to byte-stuff the termination character (as with
all multi-line responses).
Note that if the number of lines requested by the POP3
client is greater than than the number of lines in the
body, then the POP3 server sends the entire message.
Possible Responses:
+OK top of message follows
-ERR no such message
Examples:
C: TOP 1 10
S: +OK
S: <the POP3 server sends the headers of the
message, a blank line, and the first 10 lines
of the body of the message>
S: .
...
C: TOP 100 3
S: -ERR no such message
*/
byte[] buffer = Encoding.UTF8.GetBytes("TOP " + owner.SequenceNumber.ToString()+ " " + m_LineCount.ToString() + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"TOP " + owner.SequenceNumber.ToString()+ " " + m_LineCount.ToString());
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.TopCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client message.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_ClientMessage owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pOwner = owner;
m_pPop3Client = owner.m_Pop3Client;
SetState(AsyncOP_State.Active);
try{
/* RFC 1939 5. DELE
Arguments:
a message-number (required) which may NOT refer to a
message marked as deleted
Restrictions:
may only be given in the TRANSACTION state
Discussion:
The POP3 server marks the message as deleted. Any future
reference to the message-number associated with the message
in a POP3 command generates an error. The POP3 server does
not actually delete the message until the POP3 session
enters the UPDATE state.
Possible Responses:
+OK message deleted
-ERR no such message
Examples:
C: DELE 1
S: +OK message 1 deleted
...
C: DELE 2
S: -ERR message 2 already deleted
*/
byte[] buffer = Encoding.UTF8.GetBytes("DELE " + owner.SequenceNumber.ToString() + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"DELE " + owner.SequenceNumber.ToString());
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.DeleCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 2595 4. POP3 STARTTLS extension.
Arguments: none
Restrictions:
Only permitted in AUTHORIZATION state.
Possible Responses:
+OK -ERR
Examples:
C: STLS
S: +OK Begin TLS negotiation
<TLS negotiation, further commands are under TLS layer>
...
C: STLS
S: -ERR Command not permitted when TLS active
*/
byte[] buffer = Encoding.UTF8.GetBytes("STLS\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"STLS");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.StlsCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 5034 4. The AUTH Command.
AUTH mechanism [initial-response]
Arguments:
mechanism: A string identifying a SASL authentication mechanism.
initial-response: An optional initial client response, as
defined in Section 3 of [RFC4422]. If present, this response
MUST be encoded as Base64 (specified in Section 4 of
[RFC4648]), or consist only of the single character "=", which
represents an empty initial response.
*/
if(m_pSASL.SupportsInitialResponse){
byte[] buffer = Encoding.UTF8.GetBytes("AUTH " + m_pSASL.Name + " " + Convert.ToBase64String(m_pSASL.Continue(null)) + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,Encoding.UTF8.GetString(buffer).TrimEnd());
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.AuthCommandSendingCompleted,null);
}
else{
byte[] buffer = Encoding.UTF8.GetBytes("AUTH " + m_pSASL.Name + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"AUTH " + m_pSASL.Name);
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.AuthCommandSendingCompleted,null);
}
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 1935.5. LIST
Arguments:
a message-number (optional), which, if present, may NOT
refer to a message marked as deleted
Restrictions:
may only be given in the TRANSACTION state
Discussion:
If an argument was given and the POP3 server issues a
positive response with a line containing information for
that message. This line is called a "scan listing" for
that message.
If no argument was given and the POP3 server issues a
positive response, then the response given is multi-line.
After the initial +OK, for each message in the maildrop,
the POP3 server responds with a line containing
information for that message. This line is also called a
"scan listing" for that message. If there are no
messages in the maildrop, then the POP3 server responds
with no scan listings--it issues a positive response
followed by a line containing a termination octet and a
CRLF pair.
In order to simplify parsing, all POP3 servers are
required to use a certain format for scan listings. A
scan listing consists of the message-number of the
message, followed by a single space and the exact size of
the message in octets. Methods for calculating the exact
size of the message are described in the "Message Format"
section below. This memo makes no requirement on what
follows the message size in the scan listing. Minimal
implementations should just end that line of the response
with a CRLF pair. More advanced implementations may
include other information, as parsed from the message.
NOTE: This memo STRONGLY discourages implementations
from supplying additional information in the scan
listing. Other, optional, facilities are discussed
later on which permit the client to parse the messages
in the maildrop.
Note that messages marked as deleted are not listed.
Possible Responses:
+OK scan listing follows
-ERR no such message
Examples:
C: LIST
S: +OK 2 messages (320 octets)
S: 1 120
S: 2 200
S: .
...
C: LIST 2
S: +OK 2 200
...
C: LIST 3
S: -ERR no such message, only 2 messages in maildrop
*/
byte[] buffer = Encoding.UTF8.GetBytes("LIST\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"LIST");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.ListCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 1935.7. UIDL
Arguments:
a message-number (optional), which, if present, may NOT
refer to a message marked as deleted
Restrictions:
may only be given in the TRANSACTION state.
Discussion:
If an argument was given and the POP3 server issues a positive
response with a line containing information for that message.
This line is called a "unique-id listing" for that message.
If no argument was given and the POP3 server issues a positive
response, then the response given is multi-line. After the
initial +OK, for each message in the maildrop, the POP3 server
responds with a line containing information for that message.
This line is called a "unique-id listing" for that message.
In order to simplify parsing, all POP3 servers are required to
use a certain format for unique-id listings. A unique-id
listing consists of the message-number of the message,
followed by a single space and the unique-id of the message.
No information follows the unique-id in the unique-id listing.
The unique-id of a message is an arbitrary server-determined
string, consisting of one to 70 characters in the range 0x21
to 0x7E, which uniquely identifies a message within a
maildrop and which persists across sessions. This
persistence is required even if a session ends without
entering the UPDATE state. The server should never reuse an
unique-id in a given maildrop, for as long as the entity
using the unique-id exists.
Note that messages marked as deleted are not listed.
While it is generally preferable for server implementations
to store arbitrarily assigned unique-ids in the maildrop,
this specification is intended to permit unique-ids to be
calculated as a hash of the message. Clients should be able
to handle a situation where two identical copies of a
message in a maildrop have the same unique-id.
Possible Responses:
+OK unique-id listing follows
-ERR no such message
Examples:
C: UIDL
S: +OK
S: 1 whqtswO00WBw418f9t5JxYwZ
S: 2 QhdPYR:00WBw1Ph7x7
S: .
...
C: UIDL 2
S: +OK 2 QhdPYR:00WBw1Ph7x7
...
C: UIDL 3
S: -ERR no such message, only 2 messages in maildrop
*/
byte[] buffer = Encoding.UTF8.GetBytes("UIDL\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"UIDL");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.UidlCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
// Start executing LIST command.
POP3_Client.ListAsyncOP listOP = new ListAsyncOP();
listOP.CompletedAsync += delegate(object sender,EventArgs<ListAsyncOP> e){
ListCompleted(listOP);
};
if(!m_pPop3Client.ListAsync(listOP)){
ListCompleted(listOP);
}
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 1939 5. RSET.
Arguments: none
Restrictions:
may only be given in the TRANSACTION state
Discussion:
If any messages have been marked as deleted by the POP3
server, they are unmarked. The POP3 server then replies
with a positive response.
Possible Responses:
+OK
Examples:
C: RSET
S: +OK maildrop has 2 messages (320 octets)
*/
byte[] buffer = Encoding.UTF8.GetBytes("RSET\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"RSET");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.RsetCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 2449 CAPA
Arguments:
none
Restrictions:
none
Discussion:
An -ERR response indicates the capability command is not
implemented and the client will have to probe for
capabilities as before.
An +OK response is followed by a list of capabilities, one
per line. Each capability name MAY be followed by a single
space and a space-separated list of parameters. Each
capability line is limited to 512 octets (including the
CRLF). The capability list is terminated by a line
containing a termination octet (".") and a CRLF pair.
Possible Responses:
+OK -ERR
Examples:
C: CAPA
S: +OK Capability list follows
S: TOP
S: USER
S: SASL CRAM-MD5 KERBEROS_V4
S: RESP-CODES
S: LOGIN-DELAY 900
S: PIPELINING
S: EXPIRE 60
S: UIDL
S: IMPLEMENTATION Shlemazle-Plotz-v302
S: .
*/
byte[] buffer = Encoding.UTF8.GetBytes("CAPA\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"CAPA");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.CapaCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
/* RFC 1939 5 NOOP.
Arguments: none
Restrictions:
may only be given in the TRANSACTION state
Discussion:
The POP3 server does nothing, it merely replies with a
positive response.
Possible Responses:
+OK
Examples:
C: NOOP
S: +OK
*/
byte[] buffer = Encoding.UTF8.GetBytes("NOOP\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"NOOP");
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.NoopCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
/// <summary>
/// Starts operation processing.
/// </summary>
/// <param name="owner">Owner POP3 client.</param>
/// <returns>Returns true if asynchronous operation in progress or false if operation completed synchronously.</returns>
/// <exception cref="ArgumentNullException">Is raised when <b>owner</b> is null reference.</exception>
internal bool Start(POP3_Client owner)
{
if(owner == null){
throw new ArgumentNullException("owner");
}
m_pPop3Client = owner;
SetState(AsyncOP_State.Active);
try{
byte[] buffer = Encoding.UTF8.GetBytes("USER " + m_User + "\r\n");
// Log
m_pPop3Client.LogAddWrite(buffer.Length,"USER " + m_User);
// Start command sending.
m_pPop3Client.TcpStream.BeginWrite(buffer,0,buffer.Length,this.UserCommandSendingCompleted,null);
}
catch(Exception x){
m_pException = x;
m_pPop3Client.LogAddException("Exception: " + x.Message,x);
SetState(AsyncOP_State.Completed);
}
// Set flag rise CompletedAsync event flag. The event is raised when async op completes.
// If already completed sync, that flag has no effect.
lock(m_pLock){
m_RiseCompleted = true;
return m_State == AsyncOP_State.Active;
}
}
