/// <summary>
/// Adds a folder to the collection of ProjectItems with the given name.
///
/// The kind must be null, empty string, or the string value of vsProjectItemKindPhysicalFolder.
/// Virtual folders are not supported by this implementation.
/// </summary>
/// <param name="name">The name of the new folder to add</param>
/// <param name="kind">A string representing a Guid of the folder kind.</param>
/// <returns>A ProjectItem representing the newly added folder.</returns>
public override ProjectItem AddFolder(string name, string kind)
{
Project.CheckProjectIsValid();
//Verify name is not null or empty
Utilities.ValidateFileName(this.Project.Project.Site, name);
//Verify that kind is null, empty, or a physical folder
if (!(string.IsNullOrEmpty(kind) || kind.Equals(EnvDTE.Constants.vsProjectItemKindPhysicalFolder)))
{
throw new ArgumentException("Parameter specification for AddFolder was not meet", "kind");
}
for (HierarchyNode child = this.NodeWithItems.FirstChild; child != null; child = child.NextSibling)
{
if (child.Caption.Equals(name, StringComparison.OrdinalIgnoreCase))
{
throw new ArgumentException(String.Format(CultureInfo.CurrentCulture, "Folder already exists with the name '{0}'", name));
}
}
ProjectNode proj = this.Project.Project;
HierarchyNode newFolder = null;
using (AutomationScope scope = new AutomationScope(this.Project.Project.Site))
{
//In the case that we are adding a folder to a folder, we need to build up
//the path to the project node.
name = Path.Combine(this.NodeWithItems.VirtualNodeName, name);
newFolder = proj.CreateFolderNodes(name);
}
return newFolder.GetAutomationObject() as ProjectItem;
}
/// <summary>
/// Saves or Save Asthe project.
/// </summary>
/// <param name="isCalledFromSaveAs">Flag determining which Save method called , the SaveAs or the Save.</param>
/// <param name="fileName">The name of the project file.</param>
private void DoSave(bool isCalledFromSaveAs, string fileName)
{
Utilities.ArgumentNotNull("fileName", fileName);
CheckProjectIsValid();
using (AutomationScope scope = new AutomationScope(this.project.Site))
{
// If an empty file name is passed in for Save then make the file name the project name.
if (!isCalledFromSaveAs && string.IsNullOrEmpty(fileName))
{
// Use the solution service to save the project file. Note that we have to use the service
// so that all the shell's elements are aware that we are inside a save operation and
// all the file change listenters registered by the shell are suspended.
// Get the cookie of the project file from the RTD.
IVsRunningDocumentTable rdt = this.project.Site.GetService(typeof(SVsRunningDocumentTable)) as IVsRunningDocumentTable;
Utilities.CheckNotNull(rdt);
IVsHierarchy hier;
uint itemid;
IntPtr unkData;
uint cookie;
ErrorHandler.ThrowOnFailure(rdt.FindAndLockDocument((uint)_VSRDTFLAGS.RDT_NoLock, this.project.Url, out hier,
out itemid, out unkData, out cookie));
if (IntPtr.Zero != unkData)
{
Marshal.Release(unkData);
}
// Verify that we have a cookie.
if (0 == cookie)
{
// This should never happen because if the project is open, then it must be in the RDT.
throw new InvalidOperationException();
}
// Get the IVsHierarchy for the project.
IVsHierarchy prjHierarchy = HierarchyNode.GetOuterHierarchy(this.project);
// Now get the soulution.
IVsSolution solution = this.project.Site.GetService(typeof(SVsSolution)) as IVsSolution;
// Verify that we have both solution and hierarchy.
Utilities.CheckNotNull(prjHierarchy);
Utilities.CheckNotNull(solution);
ErrorHandler.ThrowOnFailure(solution.SaveSolutionElement((uint)__VSSLNSAVEOPTIONS.SLNSAVEOPT_SaveIfDirty, prjHierarchy, cookie));
}
else
{
// We need to make some checks before we can call the save method on the project node.
// This is mainly because it is now us and not the caller like in case of SaveAs or Save that should validate the file name.
// The IPersistFileFormat.Save method only does a validation that is necessary to be performed. Example: in case of Save As the
// file name itself is not validated only the whole path. (thus a file name like file\file is accepted, since as a path is valid)
// 1. The file name has to be valid.
string fullPath = fileName;
try
{
fullPath = CommonUtils.GetAbsoluteFilePath(this.Project.ProjectFolder, fileName);
}
// We want to be consistent in the error message and exception we throw. fileName could be for example #¤&%"¤&"% and that would trigger an ArgumentException on Path.IsRooted.
catch (ArgumentException ex)
{
throw new InvalidOperationException(String.Format(SR.GetString(SR.ErrorInvalidFileName, CultureInfo.CurrentUICulture), fileName), ex);
}
// It might be redundant but we validate the file and the full path of the file being valid. The SaveAs would also validate the path.
// If we decide that this is performance critical then this should be refactored.
Utilities.ValidateFileName(this.project.Site, fullPath);
if (!isCalledFromSaveAs)
{
// 2. The file name has to be the same
if (!CommonUtils.IsSamePath(fullPath, this.project.Url))
{
throw new InvalidOperationException();
}
ErrorHandler.ThrowOnFailure(this.project.Save(fullPath, 1, 0));
}
else
{
ErrorHandler.ThrowOnFailure(this.project.Save(fullPath, 0, 0));
}
}
}
}
/// <summary>
/// Removes the project from the current solution.
/// </summary>
public virtual void Delete()
{
CheckProjectIsValid();
using (AutomationScope scope = new AutomationScope(this.project.Site))
{
this.project.Remove(false);
}
}
/// <summary>
/// Adds an item to the project.
/// </summary>
/// <param name="path">The full path of the item to add.</param>
/// <param name="op">The <paramref name="VSADDITEMOPERATION"/> to use when adding the item.</param>
/// <returns>A ProjectItem object. </returns>
protected virtual EnvDTE.ProjectItem AddItem(string path, VSADDITEMOPERATION op)
{
CheckProjectIsValid();
string ext = Path.GetExtension(path);
foreach (var extension in this.Project.Project.CodeFileExtensions) {
// http://pytools.codeplex.com/workitem/617
// We are currently in create project from existing code mode. The wizard walks all of the top-level
// files and adds them. It then lets us handle any subdirectories by calling AddFromDirectory.
// But we want to filter the files for both top-level and subdirectories. Therefore we derive from
// PageManager and track when we're running the wizard and adding files for the wizard. If we are
// currently adding them ignore anything other than a .py/.pyw files - returnning null is fine
// here, the wizard doesn't care about the result.
if (String.Compare(ext, extension, StringComparison.OrdinalIgnoreCase) == 0) {
ProjectNode proj = this.Project.Project;
EnvDTE.ProjectItem itemAdded = null;
using (AutomationScope scope = new AutomationScope(this.Project.Project.Site)) {
VSADDRESULT[] result = new VSADDRESULT[1];
ErrorHandler.ThrowOnFailure(proj.AddItem(this.NodeWithItems.ID, op, path, 0, new string[1] { path }, IntPtr.Zero, result));
string fileName = System.IO.Path.GetFileName(path);
string fileDirectory = proj.GetBaseDirectoryForAddingFiles(this.NodeWithItems);
string filePathInProject = System.IO.Path.Combine(fileDirectory, fileName);
itemAdded = this.EvaluateAddResult(result[0], filePathInProject);
}
return itemAdded;
}
}
return null;
}
/// <summary>
/// Creates a new project item from an existing item template file and adds it to the project.
/// </summary>
/// <param name="fileName">The full path and file name of the template project file.</param>
/// <param name="name">The file name to use for the new project item.</param>
/// <returns>A ProjectItem object. </returns>
public override EnvDTE.ProjectItem AddFromTemplate(string fileName, string name)
{
CheckProjectIsValid();
ProjectNode proj = this.Project.Project;
EnvDTE.ProjectItem itemAdded = null;
using (AutomationScope scope = new AutomationScope(this.Project.Project.Site))
{
// Determine the operation based on the extension of the filename.
// We should run the wizard only if the extension is vstemplate
// otherwise it's a clone operation
VSADDITEMOPERATION op;
if (Utilities.IsTemplateFile(fileName))
{
op = VSADDITEMOPERATION.VSADDITEMOP_RUNWIZARD;
}
else
{
op = VSADDITEMOPERATION.VSADDITEMOP_CLONEFILE;
}
VSADDRESULT[] result = new VSADDRESULT[1];
// It is not a very good idea to throw since the AddItem might return Cancel or Abort.
// The problem is that up in the call stack the wizard code does not check whether it has received a ProjectItem or not and will crash.
// The other problem is that we cannot get add wizard dialog back if a cancel or abort was returned because we throw and that code will never be executed. Typical catch 22.
ErrorHandler.ThrowOnFailure(proj.AddItem(this.NodeWithItems.ID, op, name, 0, new string[1] { fileName }, IntPtr.Zero, result));
string fileDirectory = proj.GetBaseDirectoryForAddingFiles(this.NodeWithItems);
string templateFilePath = System.IO.Path.Combine(fileDirectory, name);
itemAdded = this.EvaluateAddResult(result[0], templateFilePath);
}
return itemAdded;
}