public FormDevices()
{
InitializeComponent();
//Populate entries with stored entries, if any
ResetConfiguration();
NHUtil.ButtonGreen(RefreshFiltersButton);
}
private void AutoGuideOnButton_Click(object sender, EventArgs e)
{
//Execute TSX_AutoGuide class
// Open and connect to autoguider
// if (not calibrated,) { abort
// Find guidestar
// Turn on Autoguide
SessionControl openSession = new SessionControl();
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
if (NHUtil.IsButtonRed(AutoGuideOnButton))
{
AutoGuide.AutoGuideStop();
AutoGuideOnButton.Text = "Start\r\nAutoguiding";
NHUtil.ButtonGreen(AutoGuideOnButton);
}
else
{
//First, save the guider cycle time and anything else in the future that might be hanging around
tPlan.GuiderCycleTime = (double)GuiderCycleTimeNum.Value;
if (tPlan.DitherEnabled)
{
AutoGuide.DitherAndStart();
}
else
{
AutoGuide.AutoGuideStart();
}
AutoGuideOnButton.Text = "Stop\r\nAutoguiding";
NHUtil.ButtonRed(AutoGuideOnButton);
}
}
private void FindStarButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(FindStarButton);
SessionControl openSession = new SessionControl();
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
bool fsbresult = AutoGuide.SetAutoGuideStar();
//if there is an error, then assume that the exposure is just too low
// reset the guide exposure to maximum and try again
if (!fsbresult)
{
tPlan.GuideExposure = tPlan.MaximumGuiderExposure;
GuideExposureTimeBox.Value = (decimal)tPlan.MaximumGuiderExposure;
fsbresult = AutoGuide.SetAutoGuideStar();
}
//If it worked this time then update the guide star position, otherwise just leave it
if (fsbresult)
{
GuideStarXBox.Text = Convert.ToInt32(tPlan.GuideStarX).ToString();
GuideStarYBox.Text = Convert.ToInt32(tPlan.GuideStarY).ToString();
}
NHUtil.ButtonGreen(FindStarButton);
}
private void ToTSXButton_Click(object sender, EventArgs e)
{
//Tries to look up the name in the target box. If found, then a new target plan is
//opened. Disconnect the telescope (in case centering is forced), use the target box to find
//and and center the star chart and FOV on the target.
//If not throw a log entry and return;
//Remove spaces from target name if any
//PlanTargetBox.Text = PlanTargetBox.Text.Replace(" ", "");
LogEvent lg = new LogEvent();
SessionControl openSession = new SessionControl();
NHUtil.ButtonRed(SelectButton);
TSXLink.Target tgt = TSXLink.StarChart.FindTarget(PlanTargetBox.Text);
if (tgt != null)
{
TSXLink.Connection.DisconnectDevice(TSXLink.Connection.Devices.Mount);
TargetPlan newtPlan = new TargetPlan(tgt.Name);
newtPlan.TargetPA = TSXLink.FOVI.GetFOVPA;
newtPlan.TargetAdjustEnabled = false;
PlanTargetBox.Text = newtPlan.TargetName;
TSXLink.StarChart.SetFOV(2);
LoadTargetPlanList();
openSession.CurrentTargetName = newtPlan.TargetName;
lg.LogIt("A new target plan has been created for " + newtPlan.TargetName);
}
else
{
lg.LogIt(PlanTargetBox.Text + ": target not found.");
}
NHUtil.ButtonGreen(SelectButton);
Show();
}
private void CalibrateButton_Click(object sender, EventArgs e)
{
//Calibrate the mount (direct guide), then calibrate AO, if set
NHUtil.ButtonRed(CalibrateButton);
AutoGuide.CalibrateAutoguiding(SubframeCheckBox.Checked, (double)XAxisMoveTime.Value, (double)YAxisMoveTime.Value);
//Restore original target position if (a new star was used
NHUtil.ButtonGreen(CalibrateButton);
}
private void ColorButtonsGreen()
{
NHUtil.ButtonGreen(AutoGuideOnButton);
NHUtil.ButtonGreen(FindStarButton);
NHUtil.ButtonGreen(OptimizeExposureButton);
NHUtil.ButtonGreen(CalibrateButton);
NHUtil.ButtonGreen(GuiderAutoCalibrateButton);
}
private void ConnectButton_Click(object sender, EventArgs e)
{
if (NHUtil.IsButtonGreen(ConnectButton))
{
NHUtil.ButtonRed(ConnectButton);
Operations.InitializeSystem();
NHUtil.ButtonGreen(ConnectButton);
}
}
private void FlatManStageButton_Click(object sender, EventArgs e)
{
FlatMan flmn = new FlatMan();
NHUtil.ButtonRed(FlatManStageButton);
flmn.FlatManStage();
NHUtil.ButtonGreen(FlatManStageButton);
return;
}
private void AbortButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(AbortButton);
//AbortEvent ab = new AbortEvent();
SetAbort();
//ab.AbortIt("Abort Button Clicked");
NHUtil.ButtonGreen(AbortButton);
StartButton.Text = "Aborted";
NHUtil.ButtonRed(StartButton);
}
private void SaveDefaultButton_Click(object sender, EventArgs e)
{
//Saves the current active target file as the default file
SessionControl openSession = new SessionControl();
NHUtil.ButtonRed(SaveDefaultButton);
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
tPlan.SavePlanAsDefaultPlan();
NHUtil.ButtonGreen(SaveDefaultButton);
}
private void TakeFlatsButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(TakeFlatsButton);
SessionControl openSession = new SessionControl();
FlatManager fmgr = new FlatManager();
fmgr.TakeFlats();
FlatManBrightnessNum.Value = openSession.FlatManBrightness;
NHUtil.ButtonGreen(TakeFlatsButton);
return;
}
public FormAutoFocus()
{
InitializeComponent();
{
ResetConfiguration();
//Set button colors
NHUtil.ButtonGreen(Presetbutton);
NHUtil.ButtonGreen(AtFocus2Button);
NHUtil.ButtonGreen(AtFocus3Button);
}
}
private void Presetbutton_Click(object sender, EventArgs e)
{
//Moves focuser to critical focus position for current temperature based on "Current.foc" focus training file:
// Checks for focuser connection
// Gets current temperature from focuser
// Calls function to compute new position from a selected focus training data file and current temperature
// Moves focuser to new position from current position
NHUtil.ButtonRed(Presetbutton);
LogEvent lg = new LogEvent();
SessionControl openSession = new SessionControl();
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
//Get a filter focus file path from the configuration file, then validate/change via dialog
FilterFileDialog.InitialDirectory = openSession.FocuserDataFolder;
FilterFileDialog.FileName = "";
DialogResult focusfilelist = FilterFileDialog.ShowDialog();
//Check for a null return (e.g. no file selected)
// just log it and return if nothing there
if (focusfilelist != DialogResult.OK)
{
lg.LogIt("No focus preset file selected");
NHUtil.ButtonGreen(Presetbutton);
return;
}
//Else...
string focusfile = FilterFileDialog.FileNames[0];
//Save the new (or unchanged) file path
int baseFilterId = tPlan.FocusFilter;
lg.LogIt("Presetting focus position");
double currenttemp = TSXLink.Focus.GetTemperature();
double newfocusposition = AutoFocus.ComputeNewFocusPosition(focusfile, currenttemp, baseFilterId);
if (newfocusposition == 0)
{
//Insufficient data to compute new position so, just leave it.
lg.LogIt("Focus preset aborted -- insufficient data to compute new position");
NHUtil.ButtonGreen(Presetbutton);
return;
}
else
{
TSXLink.Focus.MoveTo(newfocusposition);
}
lg.LogIt("Focus preset completed");
NHUtil.ButtonGreen(Presetbutton);
return;
}
private void LoadPlanButton_Click(object sender, EventArgs e)
{
//Sets the active plan to the plan selected in the target list box
NHUtil.ButtonRed(LoadPlanButton);
if (!(PlanListBox.SelectedItem == null))
{
string tname = PlanListBox.SelectedItem.ToString();
LoadNewTargetPlan(tname);
}
LoadTargetPlanList();
NHUtil.ButtonGreen(LoadPlanButton);
}
private void OptimizeExposureButton_Click(object sender, EventArgs e)
{
SessionControl openSession = new SessionControl();
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
NHUtil.ButtonRed(OptimizeExposureButton);
double optExposure = AutoGuide.OptimizeExposure();
GuideExposureTimeBox.Value = (decimal)optExposure;
tPlan.GuideExposure = optExposure;
NHUtil.ButtonGreen(OptimizeExposureButton);
}
private void ColorButtonsGreen()
{
NHUtil.ButtonGreen(ConnectButton);
NHUtil.ButtonGreen(CloseButton);
NHUtil.ButtonGreen(DisconnectButton);
NHUtil.ButtonGreen(StartButton);
NHUtil.ButtonGreen(AbortButton);
NHUtil.ButtonGreen(CloseButton);
NHUtil.ButtonGreen(OptionsButton);
NHUtil.ButtonGreen(AboutButton);
return;
}
private void MosaicButton_Click(object sender, EventArgs e)
{
//Reads and constructs mosaic entry as a set of target plans after a mosaic has
// been constructed and copied to the clipboard in TSX
//
// Button will be held red until the user has prepared mosaic in TSX and
// copied to clipboard
SessionControl openSession = new SessionControl();
if (NHUtil.IsButtonGreen(MosaicButton))
{
//Verify that a target has been loaded, if not, post error and return
// otherwise, set the button color to read, change the text and zero the FOVI
// in anticipation of loading a mosaic target set
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
if (TSXLink.StarChart.IsValidTarget(tPlan))
{
NHUtil.ButtonRed(MosaicButton);
MosaicButton.Text = "Clipboard Ready";
TSXLink.FOVI.SetFOVPA(0);
}
}
else
{
Mosaic nhms = new Mosaic();
List <Mosaic.MosaicTarget> nhmtgts = nhms.ReadTSXMosaic();
//Just return if no targets are found
if (nhmtgts != null)
{
//Save the mosaic entries as versions of the current configuration file
// For each of the entries in the mosaic,
// Load the values into the configuration file
// Save the configuration file with a prefix tName-Set-Frame
string tName = openSession.CurrentTargetName;
foreach (Mosaic.MosaicTarget mt in nhmtgts)
{
string prefixName = tName + "-" + mt.Set + "-" + mt.Frame;
TargetPlan tPlan = new TargetPlan(prefixName)
{
TargetName = prefixName,
TargetRA = mt.RA,
TargetDec = mt.Dec,
TargetPA = mt.PositionAngle,
TargetAdjustEnabled = true
};
}
}
LoadTargetPlanList();
MosaicButton.Text = "Build Mosaic";
NHUtil.ButtonGreen(MosaicButton);
}
}
private void RotateToRPAButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(RotateToRPAButton);
Rotator.PlateSolveIt();
DisplayResults();
double rotate = (double)MoveToRPANum.Value;
Rotator.RotateToRotatorPA(rotate);
Rotator.PlateSolveIt();
DisplayResults();
NHUtil.ButtonGreen(RotateToRPAButton);
return;
}
public FormPlan()
{
InitializeComponent();
PlanTargetBox.Text = FormHumason.fTargetForm.TargetBox.Text;
NHUtil.ButtonGreen(AcquireButton);
NHUtil.ButtonGreen(SelectButton);
NHUtil.ButtonGreen(AdjustButton);
NHUtil.ButtonGreen(MosaicButton);
NHUtil.ButtonGreen(LoadPlanButton);
NHUtil.ButtonGreen(ImageForecastButton);
LoadTargetPlanList();
}
private void RotateToIPAButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(RotateToIPAButton);
DisplayResults();
double rotate = (double)MoveToIPANum.Value;
if (Rotator.RotateToImagePA(rotate))
{
DisplayResults();
}
NHUtil.ButtonGreen(RotateToIPAButton);
return;
}
private void InitializeButton_Click(object sender, EventArgs e)
{
//Get location and PA of FOV on chart
NHUtil.ButtonRed(InitializeButton);
LogEvent lg = new LogEvent();
DisplayResults();
Show();
Rotator.CalibrateRotator();
DisplayResults();
Show();
NHUtil.ButtonGreen(InitializeButton);
return;
}
private void FromTSXButton_Click(object sender, EventArgs e)
{
/* Method gets whatever target is showing in the find function in TSX
* normally by using a click on a star chart object. If no object has been
* choosen (Mouse click position) or simply no target (null) then return
* Otherwise, clear the spaces out of the name and check for characters (like ":")
* that won't work in a file name. If illegal characters, then return
* Otherwise, find an existing or open new target plan for this target name
* and make it the target plan for the current session
*/
LogEvent lg = new LogEvent();
SessionControl openSession = new SessionControl();
//get the current target name from TSX and save it.
NHUtil.ButtonRed(AcquireButton);
//Retrieve current target from TSX
TSXLink.Target tgt = TSXLink.StarChart.FindTarget();
//Check to see if we're looking at a "Mouse Click Postion"
// if so, just get out of this
if ((tgt.Name != "Mouse click position") && (tgt != null))
{
//Remove spaces from target name if any
tgt.Name = tgt.Name.Replace(" ", "");
//Remove known "illegal" characters
if (tgt.Name.Contains(":"))
{
lg.LogIt("Unsupported filename characters in target name " + tgt.Name);
MessageBox.Show("Unsupported characters in target name : " + tgt.Name);
}
else
{
TargetPlan newtPlan = new TargetPlan(tgt.Name)
{
TargetAdjustEnabled = false,
TargetRA = tgt.RA,
TargetDec = tgt.Dec
};
newtPlan.TargetPA = TSXLink.FOVI.GetFOVPA;
PlanTargetBox.Text = newtPlan.TargetName;
TSXLink.StarChart.SetFOV(2);
LoadTargetPlanList();
openSession.CurrentTargetName = newtPlan.TargetName;
lg.LogIt("A new target plan has been created for " + newtPlan.TargetName);
}
}
NHUtil.ButtonGreen(AcquireButton);
this.Show();
}
private void AtFocus2Button_Click(object sender, EventArgs e)
{
//Execute TSX_AutoFocus class
// Save current object information
// Open and connect Autofocus
// Run Focus@2 for all five filters
// Save datepoints
// Turn on temperature compensation
// Return telescope to object with CloseLoopSlew
NHUtil.ButtonRed(AtFocus2Button);
AutoFocus.FocusIt(2);
NHUtil.ButtonGreen(AtFocus2Button);
return;
}
private void ImageForecastButton_Click(object sender, EventArgs e)
{
//Launches ImageForecast to create target plans
NHUtil.ButtonRed(ImageForecastButton);
string toolName = "Image Planner.appref-ms";
string ttdir = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData) + "\\Microsoft\\Windows\\Start Menu\\Programs\\TSXToolkit\\TSXToolkit";
Process pSystemExe = new Process();
string ifbPath = ttdir + "\\" + toolName;
pSystemExe.StartInfo.FileName = ifbPath;
if (System.IO.File.Exists(ifbPath))
{
pSystemExe.Start();
}
NHUtil.ButtonGreen(ImageForecastButton);
}
private void DisconnectButton_Click(object sender, EventArgs e)
{
LogEvent lg = new LogEvent();
NHUtil.ButtonRed(DisconnectButton);
lg.LogIt("Disconnecting");
if (ParkMountCheckBox.Checked)
{
lg.LogIt("Parking mount");
TSXLink.Connection.SecureMount();
ParkMountCheckBox.Checked = false;
}
TSXLink.Connection.DisconnectAllDevices();
NHUtil.ButtonGreen(DisconnectButton);
return;
}
public FormTarget()
{
//Build form
InitializeComponent();
//Initialize from/to configuration file
SBInitialConfiguration();
//Create default sequence
imgseq = new Sequencer();
//Subscribe this form to the log event
ProgressEvent prgEvent = new ProgressEvent();
prgEvent.ProgressUpdateEventHandler += ProgressUpdate_Handler;
//Set command button colors
NHUtil.ButtonGreen(UpdateButton);
NHUtil.ButtonGreen(SaveDefaultButton);
//Add the method for handling target reset events to the queue of such handlers (if any others.._
targetreset.TargetEventHandler += TargetResetEvent_Handler;
}
private void PlateSolveButton_Click(object sender, EventArgs e)
{
//Run a plate solve (image link) to determine the current rotator PA
//Connect to camera.
//Set autosave.
//Take an image
NHUtil.ButtonRed(PlateSolveButton);
LogEvent lg = new LogEvent();
if (!Rotator.PlateSolveIt())
{
NHUtil.ButtonGreen(PlateSolveButton);
return;
}
DisplayResults();
NHUtil.ButtonGreen(PlateSolveButton);
return;
}
private void TargetButton_Click(object sender, EventArgs e)
{
//POint telescope at target RA/Dec and rotate to PA
//Slew scope to RA,Dec
NHUtil.ButtonRed(TargetButton);
SessionControl openSession = new SessionControl();
TargetPlan tPlan = new TargetPlan(openSession.CurrentTargetName);
TSXLink.StarChart.ChartRA = tPlan.TargetRA;
TSXLink.StarChart.ChartDec = tPlan.TargetDec;
DisplayResults();
if (Rotator.RotateToImagePA(tPlan.TargetPA))
{
DisplayResults();
}
NHUtil.ButtonGreen(TargetButton);
return;
}
private void FlatManOnButton_Click(object sender, EventArgs e)
{
SessionControl openSession = new SessionControl();
SessionControl tplan = openSession;
if (NHUtil.IsButtonGreen(FlatManOnButton))
{
FlatMan flmn = new FlatMan();
NHUtil.ButtonRed(FlatManOnButton);
FlatManOnButton.Text = "Turn Off";
flmn.Light = true;
}
else
{
NHUtil.ButtonGreen(FlatManOnButton);
FlatManOnButton.Text = "Turn On";
FlatMan flmn = new FlatMan();
flmn.Light = false;
}
}
private void StartButton_Click(object sender, EventArgs e)
{
NHUtil.ButtonRed(StartButton);
StartButton.Text = "Running";
SetRunning();
//One can minimize TSX to help with performance, but don't
//ManageTSX.MinimizeTSX();
//Set the form to display the target tab
HumasonTabs.SelectedIndex = 1;
SessionState = SessionStateFlag.Running;
//Light off the overall imaging control process
bool successReport = Operations.ImagingControl();
//All done
//Clear the Running and Abort buttons
StartButton.Text = "Start";
NHUtil.ButtonGreen(StartButton);
AbortButton.Text = "Stop";
NHUtil.ButtonGreen(AbortButton);
}