private void LogicWeight(int Capacity, bool Load_Process, string Scrap_Weight, string Expiry_Time, bool Force_Scrap, string Syringe_Weight)
{
try
{
if (!StaticRes.Global.Need_Homing)
{
#region ***(W000)*** Weighing tray cylinder forward and check X204
if (StaticRes.Global.Process_Code.Weighting == "W000")
{
step("W000 - Weighing tray cylinder forward and check X204");
if (IO_Control.X204_Weighing_Tray_Cylinder_Forward_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W100";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_tray_cylinder_forward_failed, "W000");
return;
}
}
#endregion
#region ***(W100)*** Open weighting door and check X300 sensor to ask user put in material
if (StaticRes.Global.Process_Code.Weighting == "W100")
{
step("W100 - Open weighing door and check X300");
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
weightcontinue(Weight_Return);
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W100");
return;
}
}
#endregion
#region ***(W200)*** Close weight door and check X301 sensor
if (StaticRes.Global.Process_Code.Weighting == "W200")
{
step("W200 - Close weighing door and check X301");
if (IO_Control.X301_Weighing_Door_Close_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W300";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_closed, "W200");
return;
}
}
#endregion
#region ***(W300)*** Check cap present sensor base on cap type
if (StaticRes.Global.Process_Code.Weighting == "W300")
{
switch (Capacity)
{
case 5:
{
step("W300 - Check 5CC cap present sensor X305");
if (StaticRes.Global.System_Setting.Bypass_Syringe_5cc_Cap_Present_Sensor == "Y")
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (Hardware.IO_LIST.Input.X305_5cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Syringe_5cc_cap_not_present, "W300");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W300");
return;
}
}
}
}
break;
case 10:
{
step("W300 - Check 10CC cap present sensor X304");
if (StaticRes.Global.System_Setting.Bypass_Syringe_10cc_Cap_Present_Sensor == "Y")
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (Hardware.IO_LIST.Input.X304_10cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Syringe_10cc_cap_not_present, "W300");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W300");
return;
}
}
}
}
break;
case 30:
{
step("W300 - Check 30CC cap present sensor X303");
if (StaticRes.Global.System_Setting.Bypass_Syringe_30cc_Cap_Present_Sensor == "Y")
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (Hardware.IO_LIST.Input.X303_30cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W400";
}
else
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Syringe_30cc_cap_not_present, "W300");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W300");
return;
}
}
}
}
break;
}
}
#endregion
#region ***(W400)*** Check syringe top cover present sensor X302
if (StaticRes.Global.Process_Code.Weighting == "W400")
{
step("W400 - Check syringe top cover present sensor X302");
if (StaticRes.Global.System_Setting.Bypass_Syringe_Top_Cover_Sensor == "Y")
{
StaticRes.Global.Process_Code.Weighting = "W500";
}
else
{
if (Hardware.IO_LIST.Input.X302_Syringe_Top_Cover_Present())
{
StaticRes.Global.Process_Code.Weighting = "W500";
}
else
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Syringe_top_cover_not_present, "W400");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W400");
return;
}
}
}
}
#endregion
#region ***(W500)*** Check syringe present sensor X306
if (StaticRes.Global.Process_Code.Weighting == "W500")
{
step("W500 - Check syringe present sensor X306");
if (Hardware.IO_LIST.Input.X306_Syringe_Present())
{
StaticRes.Global.Process_Code.Weighting = "W600";
}
else
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Syringe_not_present, "W500");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W500");
return;
}
}
}
#endregion
#region ***(W600)*** Weighting And Read Data
if (StaticRes.Global.Process_Code.Weighting == "W600")
{
try
{
Open_WeightScale_ComPort();
step("W600 - Weighting....Result:" + Weight_Return.ToString() + "");
DateTime Start_Time = System.DateTime.Now;
System.Threading.Thread.Sleep(1000);
while (Weight_Return < float.Parse(Syringe_Weight))
{
TimeSpan ts = System.DateTime.Now - Start_Time;
if (ts.TotalMilliseconds > 10000)
{
break;
}
}
Close_WeightScale_ComPort();
if (Weight_Return >= float.Parse(Syringe_Weight))
{
StaticRes.Global.Process_Code.Weighting = "W700";
}
else
{
Common.Reports.LogFile.Log("Weighting Error [W600] -- " + Weight_Return.ToString() + "<" + Syringe_Weight.ToString());
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Weighing_Failed, "W600");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W600");
return;
}
}
}
catch
{
Common.Reports.LogFile.Log("Weighting Error [W600] -- " + Weight_Return.ToString() + "<" + Syringe_Weight.ToString());
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Weighing_Failed, "W600");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W600");
return;
}
}
}
#endregion
#region ***(W700)*** Check either is load or return , if load-go W1000,if return- go W800
if (StaticRes.Global.Process_Code.Weighting == "W700")
{
if (Load_Process)
{
StaticRes.Global.Process_Code.Weighting = "W1000";
}
else
{
StaticRes.Global.Process_Code.Weighting = "W800";
}
}
#endregion
#region ***(W800)*** Check either is scrap or reuse , if reuse-go W1000, if scrap-go W900
if (StaticRes.Global.Process_Code.Weighting == "W800")
{
try
{
string Status = string.Empty;
if (Force_Scrap)
{
Status = StaticRes.Global.Status.Scrap;
}
else
{
if (DateTime.Parse(Expiry_Time) <= System.DateTime.Now)
{
Status = StaticRes.Global.Status.Scrap;
}
else if (Weight_Return <= float.Parse(Scrap_Weight))
{
Status = StaticRes.Global.Status.Scrap;
}
else if (DateTime.Parse(Expiry_Time) <= System.DateTime.Now.AddHours(StaticRes.Global.System_Setting.Time_1))//yakun.zhoou 2015/06/30
{
Status = StaticRes.Global.Status.Scrap;
}
else
{
Status = StaticRes.Global.Status.Reuse;
}
}
if (Status == StaticRes.Global.Status.Reuse)
{
StaticRes.Global.Process_Code.Weighting = "W1000";
}
else
{
StaticRes.Global.Process_Code.Weighting = "W900";
}
step("W800 - Syringe go " + Status + "");
}
catch
{
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W200";
Error_Throw(StaticRes.Global.Error_List.Weighing_Failed, "W800");
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W800");
return;
}
}
}
#endregion
#region ***(W900)*** if force scrap , scrap chute open
if (StaticRes.Global.Process_Code.Weighting == "W900")
{
if (Force_Scrap)
{
step("W900 - Force scrap ,open scrap chute to scrap drawer 2 and check X203 sensor");
if (IO_Control.X203_Scrap_Chute_To_Drawer_2_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W910";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Scrap_shute_cyiinder_to_drawer_2_failed, "W900");
return;
}
}
else
{
step("W900 - Normal scrap , open scrap chute to scrap drawer 1 and check X202 sensor");
if (IO_Control.X202_Scrap_Chute_To_Drawer_1_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W910";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Scrap_chute_cylinder_to_drawer_1_failed, "W900");
return;
}
}
}
#endregion
#region ***(W910)*** Weighting tray cylinder backward and check X205
if (StaticRes.Global.Process_Code.Weighting == "W910")
{
step("W910 - Weighting tray cylinder backward and check X205");
if (IO_Control.X205_Weighing_Tray_Cylinder_Backward_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W920";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_tray_cylinder_backward_failed, "W910");
return;
}
}
#endregion
#region ***(W920)*** Null
if (StaticRes.Global.Process_Code.Weighting == "W920")
{
StaticRes.Global.Process_Code.Weighting = "W930";
}
#endregion
#region ***(W930)*** Weighting tray cylinder backward and check X205
if (StaticRes.Global.Process_Code.Weighting == "W930")
{
step("W930 - Weighting tray cylinder forward and check X204");
if (IO_Control.X204_Weighing_Tray_Cylinder_Forward_and_Check())
{
Weight_Return = 100 + Weight_Return; //for indicate whether need update server after weighing
StaticRes.Global.Process_Code.Weighting = "W1600";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_tray_cylinder_forward_failed, "W930");
return;
}
}
#endregion
#region ***(W1000)*** Open Weight Scale door and check X300 sensor to ask user take out material
if (StaticRes.Global.Process_Code.Weighting == "W1000")
{
step("W1000 - Open weighting door and check X300");
if (IO_Control.X300_Weighing_Door_Open_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W1100";
weightcontinue(Weight_Return);
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_opened, "W1000");
return;
}
}
#endregion
#region ***(W1100)*** Check syringe top cover present sensor X302
if (StaticRes.Global.Process_Code.Weighting == "W1100")
{
step("W1100 - Check syringe top cover present sensor X302");
if (!Hardware.IO_LIST.Input.X302_Syringe_Top_Cover_Present())
{
StaticRes.Global.Process_Code.Weighting = "W1200";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Syringe_top_cover_present, "W1100");
return;
}
}
#endregion
#region ***(W1200)*** Check 30cc cap present sensor X303
if (StaticRes.Global.Process_Code.Weighting == "W1200")
{
step("W1200 - Check 30cc cap present sensor X303");
if (!Hardware.IO_LIST.Input.X303_30cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W1300";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Syringe_30cc_cap_present, "W1200");
return;
}
}
#endregion
#region ***(W1300)*** Check 10cc cap present sensor X304
if (StaticRes.Global.Process_Code.Weighting == "W1300")
{
step("W1300 - Check 10cc syringe cap present sensor X304");
if (!Hardware.IO_LIST.Input.X304_10cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W1400";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Syringe_10cc_cap_present, "W1300");
return;
}
}
#endregion
#region ***(W1400)*** Check 5cc cap present sensor X305
if (StaticRes.Global.Process_Code.Weighting == "W1400")
{
step("W1400 - Check 5cc cap present sensor X305");
if (!Hardware.IO_LIST.Input.X305_5cc_Syringe_Cap_Present())
{
StaticRes.Global.Process_Code.Weighting = "W1500";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Syringe_5cc_cap_present, "W1400");
return;
}
}
#endregion
#region ***(W1500)*** Check syringe present sensor X306
if (StaticRes.Global.Process_Code.Weighting == "W1500")
{
step("W1500 - Check syringe present sensor X306");
if (!Hardware.IO_LIST.Input.X306_Syringe_Present())
{
StaticRes.Global.Process_Code.Weighting = "W1600";
}
else
{
Error_Throw(StaticRes.Global.Error_List.Syringe_present, "W1500");
return;
}
}
#endregion
#region ***(W1600)*** Close weight scale door and check X301 sensor
if (StaticRes.Global.Process_Code.Weighting == "W1600")
{
step("W1600 - Close weighing door and check X301 sensor");
if (IO_Control.X301_Weighing_Door_Close_and_Check())
{
StaticRes.Global.Process_Code.Weighting = "W000";
StaticRes.Global.IsOnProgress = false;
weightcomplete(Weight_Return);
return;
}
else
{
Error_Throw(StaticRes.Global.Error_List.Weighing_door_not_closed, "W1600");
return;
}
}
#endregion
}
}
catch (Exception ee)
{
Common.Reports.LogFile.Log("Weighting Error -- " + ee.Message + ",W000 , user:"******"From Weighting Exception");
return;
}
}
