public BitmapSource WriteToBitmapSource(BitMatrix QrMatrix, Point DPI)
{
int width = QrMatrix == null ? 21 : QrMatrix.Width;
DrawingSize dSize = m_ISize.GetSize(width);
int quietZone = (int)dSize.QuietZoneModules;
GeometryDrawing quietZoneDrawing = ConstructQZDrawing(2 * quietZone + width);
GeometryDrawing qrDrawing = ConstructQrDrawing(QrMatrix, quietZone, quietZone);
DrawingGroup qrGroup = new DrawingGroup();
qrGroup.Children.Add(quietZoneDrawing);
qrGroup.Children.Add(qrDrawing);
DrawingBrush qrBrush = ConstructDrawingBrush(qrGroup);
PixelFormat pixelFormat = PixelFormats.Pbgra32;
RenderTargetBitmap renderbmp = new RenderTargetBitmap(dSize.CodeWidth, dSize.CodeWidth, DPI.X, DPI.Y, pixelFormat);
DrawingVisual drawingVisual = new DrawingVisual();
using (DrawingContext dContext = drawingVisual.RenderOpen())
{
dContext.DrawRectangle(qrBrush, null, new Rect(0, 0, (dSize.CodeWidth / DPI.X) * 96, (dSize.CodeWidth / DPI.Y) * 96));
}
renderbmp.Render(drawingVisual);
return(renderbmp);
}
/// <summary>
/// Saves QrCode Image to specified stream in the specified format
/// </summary>
/// <exception cref="ArgumentNullException">Stream or Format is null</exception>
/// <exception cref="ExternalException">The image was saved with the wrong image format</exception>
/// <remarks>You should avoid saving an image to the same stream that was used to construct. Doing so might damage the stream
/// If any additional data has been written to the stream before saving the image, the image data in the stream will be corrupted</remarks>
public void WriteToStream(BitMatrix QrMatrix, ImageFormat imageFormat, Stream stream)
{
/* if (imageFormat == ImageFormat.Emf || imageFormat == ImageFormat.Wmf)
* {
* this.CreateMetaFile(QrMatrix, stream);
* }
* else if (imageFormat != ImageFormat.Exif
* && imageFormat != ImageFormat.Icon
* && imageFormat != ImageFormat.MemoryBmp)
* {
* DrawingSize size = m_iSize.GetSize(QrMatrix == null ? 21 : QrMatrix.Width);
*
* using (Bitmap bitmap = new Bitmap(size.CodeWidth, size.CodeWidth))
* using (Graphics graphics = Graphics.FromImage(bitmap))
* {
* this.Draw(graphics, QrMatrix);
* bitmap.Save(stream, imageFormat);
* }
* }
*/
if (imageFormat != ImageFormat.Exif &&
imageFormat != ImageFormat.Icon &&
imageFormat != ImageFormat.MemoryBmp)
{
DrawingSize size = m_iSize.GetSize(QrMatrix == null ? 21 : QrMatrix.Width);
using (Bitmap bitmap = new Bitmap(size.CodeWidth, size.CodeWidth))
using (Graphics graphics = Graphics.FromImage(bitmap))
{
this.Draw(graphics, QrMatrix);
bitmap.Save(stream, imageFormat);
}
}
}
/// <summary>
/// Saves QrCode Image to specified stream in the specified format
/// </summary>
/// <exception cref="ArgumentNullException">Stream or Format is null</exception>
/// <exception cref="ExternalException">The image was saved with the wrong image format</exception>
/// <remarks>You should avoid saving an image to the same stream that was used to construct. Doing so might damage the stream
/// If any additional data has been written to the stream before saving the image, the image data in the stream will be corrupted</remarks>
public void WriteToStream(BitMatrix QrMatrix, ImageFormat imageFormat, Stream stream, Point DPI)
{
if (imageFormat == ImageFormat.Emf || imageFormat == ImageFormat.Wmf)
{
this.CreateMetaFile(QrMatrix, stream);
}
else if (imageFormat != ImageFormat.Exif &&
imageFormat != ImageFormat.Icon &&
imageFormat != ImageFormat.MemoryBmp)
{
DrawingSize size = m_iSize.GetSize(QrMatrix == null ? 21 : QrMatrix.Width);
using (Bitmap bitmap = new Bitmap(size.CodeWidth, size.CodeWidth))
{
if (DPI.X != 96 || DPI.Y != 96)
{
bitmap.SetResolution(DPI.X, DPI.Y);
}
using (Graphics graphics = Graphics.FromImage(bitmap))
{
this.Draw(graphics, QrMatrix);
bitmap.Save(stream, imageFormat);
}
}
}
}
/// <summary>
/// Renders the matrix in an Encapsuled PostScript format.
/// </summary>
/// <param name="matrix">The matrix to be rendered</param>
/// <param name="moduleSize">Size in points (1 inch contains 72 point in PostScript) of a module</param>
/// <param name="stream">Output stream that must be writable</param>
public void WriteToStream(BitMatrix matrix, Stream stream)
{
using (var writer = new StreamWriter(stream))
{
int width = matrix == null ? 21 : matrix.Width;
DrawingSize drawingSize = m_iSize.GetSize(width);
OutputHeader(drawingSize, writer);
OutputBackground(writer);
if (matrix != null)
{
switch (m_DrawingTechnique)
{
case EpsModuleDrawingTechnique.Squares:
DrawSquares(matrix, writer);
break;
case EpsModuleDrawingTechnique.Image:
DrawImage(matrix, writer);
break;
default:
throw new ArgumentOutOfRangeException("DrawingTechnique");
}
}
OutputFooter(writer);
}
}
/// <summary>
/// Outputs the EPS header with mandatory declarations, variable declarations and function definitions.
/// </summary>
/// <param name="matrix">The matrix to be rendered</param>
/// <param name="moduleSize">Size in points (1 inch contains 72 point in PostScript) of a module</param>
/// <param name="stream">Output text stream</param>
private void OutputHeader(DrawingSize drawingSize, StreamWriter stream)
{
string strHeader = @"%!PS-Adobe-3.0 EPSF-3.0
%%Creator: Gma.QrCodeNet
%%Title: QR Code
%%CreationDate: {0:yyyyMMdd}
%%Pages: 1
%%BoundingBox: 0 0 {1} {2}
%%Document-Fonts: Times-Roman
%%LanguageLevel: 1
%%EndComments
%%BeginProlog
/w {{ {3} }} def
/h {{ {4} }} def
/q {{ {5} }} def
/s {{ {6} }} def
/W {{ w q q add add }} def
/H {{ h q q add add }} def";
string strBoxFunctions = @"% Define the box functions taking X and Y coordinates of the top left corner and filling a 1 point large square
/b { newpath moveto 1 0 rlineto 0 1 rlineto -1 0 rlineto closepath fill } def
/br { newpath moveto 1.01 0 rlineto 0 1 rlineto -1.01 0 rlineto closepath fill } def
/bb { newpath moveto 1 0 rlineto 0 1.01 rlineto -1 0 rlineto closepath fill } def
/brb { newpath moveto 1.01 0 rlineto 0 1 rlineto -0.01 0 rlineto 0 0.01 rlineto -1 0 rlineto closepath fill } def";
string strHeaderEnd = @"%%EndProlog
%%Page: 1 1
% Save the current state
save
% Invert the Y axis
0 W s mul translate
s s neg scale";
stream.WriteLine(string.Format(strHeader,
DateTime.UtcNow,
// Use invariant culture to ensure that the dot is used as the decimal separator
(drawingSize.CodeWidth).ToString(CultureInfo.InvariantCulture.NumberFormat), // Size in points of the matrix with the quiet zone
(drawingSize.CodeWidth).ToString(CultureInfo.InvariantCulture.NumberFormat),
drawingSize.CodeWidth / drawingSize.ModuleSize - ((int)drawingSize.QuietZoneModules * 2), // Number of modules of the matrix without the quiet zone
drawingSize.CodeWidth / drawingSize.ModuleSize - ((int)drawingSize.QuietZoneModules * 2),
(int)drawingSize.QuietZoneModules, // Number of quiet zone modules
drawingSize.ModuleSize.ToString(CultureInfo.InvariantCulture.NumberFormat))); // Size in points of a single module
if (m_DrawingTechnique == EpsModuleDrawingTechnique.Squares)
{
stream.WriteLine(strBoxFunctions);
}
stream.WriteLine(strHeaderEnd);
}
public void WriteToStream(BitMatrix qrMatrix, ImageFormatEnum imageFormat, Stream stream)
{
DrawingSize dSize = ISize.GetSize(qrMatrix == null ? 21 : qrMatrix.Width);
WriteableBitmap wBitmap = new WriteableBitmap(dSize.CodeWidth, dSize.CodeWidth, 96, 96, PixelFormats.Gray8, null);
this.Draw(wBitmap, qrMatrix);
BitmapEncoder encoder = imageFormat.ChooseEncoder();
encoder.Frames.Add(BitmapFrame.Create(wBitmap));
encoder.Save(stream);
}
/// <summary>
/// Drawing Bitmatrix to winform graphics.
/// </summary>
/// <param name="QrMatrix">Draw background only for null matrix</param>
/// <exception cref="ArgumentNullException">DarkBrush or LightBrush is null</exception>
public void Draw(Graphics graphics, BitMatrix QrMatrix, Point offset)
{
int width = QrMatrix == null ? 21 : QrMatrix.Width;
DrawingSize size = m_iSize.GetSize(width);
graphics.FillRectangle(m_LightBrush, offset.X, offset.Y, size.CodeWidth, size.CodeWidth);
if (QrMatrix == null || size.ModuleSize == 0)
{
return;
}
int padding = (size.CodeWidth - (size.ModuleSize * width)) / 2;
int preX = -1;
for (int y = 0; y < width; y++)
{
for (int x = 0; x < width; x++)
{
if (QrMatrix[x, y])
{
//Set start point if preX == -1
if (preX == -1)
{
preX = x;
}
//If this is last module in that row. Draw rectangle
if (x == width - 1)
{
Point modulePosition = new Point(preX * size.ModuleSize + padding + offset.X,
y * size.ModuleSize + padding + offset.Y);
Size rectSize = new Size((x - preX + 1) * size.ModuleSize, size.ModuleSize);
graphics.FillRectangle(m_DarkBrush, modulePosition.X, modulePosition.Y, rectSize.Width, rectSize.Height);
preX = -1;
}
}
else if (!QrMatrix[x, y] && preX != -1)
{
//Here will be first light module after sequence of dark module.
//Draw previews sequence of dark Module
Point modulePosition = new Point(preX * size.ModuleSize + padding + offset.X,
y * size.ModuleSize + padding + offset.Y);
Size rectSize = new Size((x - preX) * size.ModuleSize, size.ModuleSize);
graphics.FillRectangle(m_DarkBrush, modulePosition.X, modulePosition.Y, rectSize.Width, rectSize.Height);
preX = -1;
}
}
}
}
/// <summary>
/// Outputs the EPS header with mandatory declarations, variable declarations and function definitions.
/// </summary>
/// <param name="matrix">The matrix to be rendered</param>
/// <param name="moduleSize">Size in points (1 inch contains 72 point in PostScript) of a module</param>
/// <param name="stream">Output text stream</param>
private void OutputHeader(DrawingSize drawingSize, StreamWriter stream)
{
string strHeader = @"%!PS-Adobe-3.0 EPSF-3.0
%%Creator: Gma.QrCodeNet
%%Title: QR Code
%%CreationDate: {0:yyyyMMdd}
%%Pages: 1
%%BoundingBox: 0 0 {1} {2}
%%Document-Fonts: Times-Roman
%%LanguageLevel: 1
%%EndComments
%%BeginProlog
/w {{ {3} }} def
/h {{ {4} }} def
/q {{ {5} }} def
/s {{ {6} }} def
/W {{ w q q add add }} def
/H {{ h q q add add }} def";
string strBoxFunctions = @"% Define the box functions taking X and Y coordinates of the top left corner and filling a 1 point large square
/b { newpath moveto 1 0 rlineto 0 1 rlineto -1 0 rlineto closepath fill } def
/br { newpath moveto 1.01 0 rlineto 0 1 rlineto -1.01 0 rlineto closepath fill } def
/bb { newpath moveto 1 0 rlineto 0 1.01 rlineto -1 0 rlineto closepath fill } def
/brb { newpath moveto 1.01 0 rlineto 0 1 rlineto -0.01 0 rlineto 0 0.01 rlineto -1 0 rlineto closepath fill } def";
string strHeaderEnd = @"%%EndProlog
%%Page: 1 1
% Save the current state
save
% Invert the Y axis
0 W s mul translate
s s neg scale";
stream.WriteLine(string.Format(strHeader,
DateTime.UtcNow,
// Use invariant culture to ensure that the dot is used as the decimal separator
(drawingSize.CodeWidth).ToString(CultureInfo.InvariantCulture.NumberFormat), // Size in points of the matrix with the quiet zone
(drawingSize.CodeWidth).ToString(CultureInfo.InvariantCulture.NumberFormat),
drawingSize.CodeWidth / drawingSize.ModuleSize - ((int)drawingSize.QuietZoneModules * 2), // Number of modules of the matrix without the quiet zone
drawingSize.CodeWidth / drawingSize.ModuleSize - ((int)drawingSize.QuietZoneModules * 2),
(int)drawingSize.QuietZoneModules, // Number of quiet zone modules
drawingSize.ModuleSize.ToString(CultureInfo.InvariantCulture.NumberFormat))); // Size in points of a single module
if (m_DrawingTechnique == EpsModuleDrawingTechnique.Squares)
stream.WriteLine(strBoxFunctions);
stream.WriteLine(strHeaderEnd);
}
private void AppendSVGQrCode(StringBuilder sb, BitMatrix matrix, bool includeSize, bool isStream)
{
DrawingSize dsize = m_iSize.GetSize(matrix.Width);
int pixelwidth = m_iSize.GetSize(matrix.Width).CodeWidth;
int quietZone = (int)dsize.QuietZoneModules;
int width = matrix == null ? 21 : matrix.Width;
sb.AppendSVGTag(includeSize ? new MatrixPoint(pixelwidth, pixelwidth) : new MatrixPoint(0, 0),
new MatrixPoint(2 * quietZone + width, 2 * quietZone + width), m_LightColor, m_DarkColor);
if (!isStream)
{
sb.Append(@"<!-- Created with Qrcode.Net (http://qrcodenet.codeplex.com/) -->");
}
AppendDarkCell(sb, matrix, quietZone, quietZone);
sb.AppendSVGTagEnd();
}
/// <summary>
/// Saves QrCode Image to specified stream in the specified format in the parallel safe mode
/// </summary>
/// <param name="qrMatrix"></param>
/// <param name="imageFormat"></param>
/// <param name="stream"></param>
/// <exception cref="ArgumentNullException">Throws when <paramref name="qrMatrix"/> is null</exception>
/// <exception cref="ArgumentException">Throws when <paramref name="imageFormat"/> is Exif, Icon, or MemoryBmp</exception>
/// <remarks>You should avoid saving an image to the same stream that was used to construct. Doing so might damage the stream. If any additional data has been written to the stream before saving the image, the image data in the stream will be corrupted</remarks>
public void WriteToStreamParallelSafe(BitMatrix qrMatrix, ImageFormat imageFormat, Stream stream)
{
if (qrMatrix == null)
{
throw new ArgumentNullException(nameof(qrMatrix));
}
if (imageFormat == ImageFormat.Exif ||
imageFormat == ImageFormat.Icon ||
imageFormat == ImageFormat.MemoryBmp)
{
throw new ArgumentException($"Unsupported {imageFormat}");
}
DrawingSize size = m_iSize.GetSize(qrMatrix.Width);
int width = size.CodeWidth;
int border = 10; // size.ModuleSize * 2 ?
// Assuming that size > qrMatrix.Width is always true
var quality = width / qrMatrix.Width;
using (var bitmap = new Bitmap(
qrMatrix.Width * quality + 2 * border,
qrMatrix.Width * quality + 2 * border))
{
for (var i = 0; i < qrMatrix.Width; i++)
{
for (var j = 0; j < qrMatrix.Width; j++)
{
var color = qrMatrix[i, j]
? Color.Black
: Color.White;
for (var x = 0; x < quality; x++)
{
for (var y = 0; y < quality; y++)
{
bitmap.SetPixel(
border + i * quality + x,
border + j * quality + y,
color);
}
}
}
}
bitmap.Save(stream, imageFormat);
}
}
/// <summary>
/// Draw QrCode at given writeable bitmap at offset location
/// </summary>
public void Draw(WriteableBitmap wBitmap, BitMatrix matrix, int offsetX, int offsetY)
{
DrawingSize size = matrix == null?ISize.GetSize(21) : ISize.GetSize(matrix.Width);
if (wBitmap == null)
{
wBitmap = new WriteableBitmap(size.CodeWidth + offsetX, size.CodeWidth + offsetY, 96, 96, PixelFormats.Gray8, null);
}
else if (wBitmap.PixelHeight == 0 || wBitmap.PixelWidth == 0)
{
return; //writeablebitmap contains no pixel.
}
this.DrawQuietZone(wBitmap, size.CodeWidth, offsetX, offsetY);
if (matrix == null)
{
return;
}
this.DrawDarkModule(wBitmap, matrix, offsetX, offsetY);
}
/// <summary>
/// Draw qrCode dark modules at given position. (It will also include quiet zone area. Set it to zero to exclude quiet zone)
/// </summary>
/// <exception cref="ArgumentNullException">Bitmatrix, wBitmap should not equal to null</exception>
/// <exception cref="ArgumentOutOfRangeException">wBitmap's pixel width or height should not equal to zero</exception>
public void DrawDarkModule(WriteableBitmap wBitmap, BitMatrix matrix, int offsetX, int offsetY)
{
if (matrix == null)
{
throw new ArgumentNullException("Bitmatrix");
}
DrawingSize size = ISize.GetSize(matrix.Width);
if (wBitmap == null)
{
throw new ArgumentNullException("wBitmap");
}
else if (wBitmap.PixelHeight == 0 || wBitmap.PixelWidth == 0)
{
throw new ArgumentOutOfRangeException("wBitmap", "WriteableBitmap's pixelHeight or PixelWidth are equal to zero");
}
int padding = (size.CodeWidth - size.ModuleSize * matrix.Width) / 2;
int preX = -1;
int moduleSize = size.ModuleSize;
if (moduleSize == 0)
{
return;
}
for (int y = 0; y < matrix.Width; y++)
{
for (int x = 0; x < matrix.Width; x++)
{
if (matrix[x, y])
{
if (preX == -1)
{
preX = x;
}
if (x == matrix.Width - 1)
{
Int32Rect moduleArea =
new Int32Rect(preX * moduleSize + padding + offsetX,
y * moduleSize + padding + offsetY,
(x - preX + 1) * moduleSize,
moduleSize);
wBitmap.FillRectangle(moduleArea, DarkColor);
preX = -1;
}
}
else if (preX != -1)
{
Int32Rect moduleArea =
new Int32Rect(preX * moduleSize + padding + offsetX,
y * moduleSize + padding + offsetY,
(x - preX) * moduleSize,
moduleSize);
wBitmap.FillRectangle(moduleArea, DarkColor);
preX = -1;
}
}
}
}