public void Start()
{
//WUP-028
//VENDORID 0x57E
//PRODUCT ID 0x337
var USBFinder = new UsbDeviceFinder(0x057E, 0x0337);
GCNAdapter = UsbDevice.OpenUsbDevice(USBFinder);
if (GCNAdapter != null)
{
int transferLength;
reader = GCNAdapter.OpenEndpointReader(ReadEndpointID.Ep01);
writer = GCNAdapter.OpenEndpointWriter(WriteEndpointID.Ep02);
//prompt controller to start sending
writer.Write(Convert.ToByte((char)19), 10, out transferLength);
try
{
if (gcn1Enabled && !JoystickHelper.checkJoystick(1))
{
JoystickHelper.CreateJoystick(1);
}
if (gcn2Enabled && !JoystickHelper.checkJoystick(2))
{
JoystickHelper.CreateJoystick(2);
}
if (gcn3Enabled && !JoystickHelper.checkJoystick(3))
{
JoystickHelper.CreateJoystick(3);
}
if (gcn4Enabled && !JoystickHelper.checkJoystick(4))
{
JoystickHelper.CreateJoystick(4);
}
if (gcn1Enabled && JoystickHelper.Acquire(1))
{
gcn1ok = true;
}
if (gcn2Enabled && JoystickHelper.Acquire(2))
{
gcn2ok = true;
}
if (gcn3Enabled && JoystickHelper.Acquire(3))
{
gcn3ok = true;
}
if (gcn4Enabled && JoystickHelper.Acquire(4))
{
gcn4ok = true;
}
}
catch (Exception ex)
{
if (ex.Message.Contains("HRESULT: 0x8007000B"))
{
Log(null, new LogEventArgs("Error: vJoy driver mismatch. Did you install the wrong version (x86/x64)?"));
Driver.run = false;
return;
}
}
if (noEventMode)
{
// PORT 1: bytes 02-09
// PORT 2: bytes 11-17
// PORT 3: bytes 20-27
// PORT 4: bytes 29-36l
byte[] ReadBuffer = new byte[37]; // 32 (4 players x 8) bytes for input, 5 bytes for formatting
byte[] WriteBuffer = new byte[5]; // 1 for command, 4 for rumble state
WriteBuffer[0] = 0x11;
WriteBuffer[1] = 0;
Log(null, new LogEventArgs("Driver successfully started, entering input loop."));
run = true;
Stopwatch sw = Stopwatch.StartNew();
while (run)
{
var ec = reader.Read(ReadBuffer, 10, out transferLength);
var input1 = GCNState.GetState(getFastInput1(ref ReadBuffer));
var input2 = GCNState.GetState(getFastInput2(ref ReadBuffer));
var input3 = GCNState.GetState(getFastInput3(ref ReadBuffer));
var input4 = GCNState.GetState(getFastInput4(ref ReadBuffer));
if (gcn1ok)
{
JoystickHelper.setJoystick(input1, 1, gcn1DZ);
}
if (gcn2ok)
{
JoystickHelper.setJoystick(input2, 2, gcn2DZ);
}
if (gcn3ok)
{
JoystickHelper.setJoystick(input3, 3, gcn3DZ);
}
if (gcn4ok)
{
JoystickHelper.setJoystick(input4, 4, gcn4DZ);
}
long elapsed = sw.ElapsedMilliseconds;
sw.Reset(); sw.Start();
if (Interlocked.Read(ref gcn1Ffb) > 0)
{
if (gcn1FfbInf == false)
{
Interlocked.Add(ref gcn1Ffb, -elapsed);
}
WriteBuffer[1] = (byte)(gcn1FfbActive ? 1 : 0);
}
else
{
WriteBuffer[1] = 0;
}
if (Interlocked.Read(ref gcn2Ffb) > 0)
{
if (gcn2FfbInf == false)
{
Interlocked.Add(ref gcn2Ffb, -elapsed);
}
WriteBuffer[2] = (byte)(gcn2FfbActive ? 1 : 0);
}
else
{
WriteBuffer[2] = 0;
}
if (Interlocked.Read(ref gcn3Ffb) > 0)
{
if (gcn3FfbInf == false)
{
Interlocked.Add(ref gcn3Ffb, -elapsed);
}
WriteBuffer[3] = (byte)(gcn3FfbActive ? 1 : 0);
}
else
{
WriteBuffer[3] = 0;
}
if (Interlocked.Read(ref gcn4Ffb) > 0)
{
if (gcn4FfbInf == false)
{
Interlocked.Add(ref gcn4Ffb, -elapsed);
}
WriteBuffer[4] = (byte)(gcn4FfbActive ? 1 : 0);
}
else
{
WriteBuffer[4] = 0;
}
writer.Write(WriteBuffer, 10, out transferLength);
System.Threading.Thread.Sleep(5);
}
WriteBuffer[1] = 0; WriteBuffer[2] = 0; WriteBuffer[3] = 0; WriteBuffer[4] = 0;
writer.Write(WriteBuffer, 10, out transferLength);
if (GCNAdapter != null)
{
if (GCNAdapter.IsOpen)
{
if (!ReferenceEquals(wholeGCNAdapter, null))
{
wholeGCNAdapter.ReleaseInterface(0);
}
GCNAdapter.Close();
}
GCNAdapter = null;
UsbDevice.Exit();
Log(null, new LogEventArgs("Closing driver thread..."));
}
Log(null, new LogEventArgs("Driver thread has been stopped."));
}
else
{
Log(null, new LogEventArgs("Driver successfully started, entering input loop."));
//using Interrupt request instead of looping behavior.
reader.DataReceivedEnabled = true;
reader.DataReceived += reader_DataReceived;
reader.ReadBufferSize = 37;
reader.ReadThreadPriority = System.Threading.ThreadPriority.Highest;
run = true;
}
}
else
{
Log(null, new LogEventArgs("GCN Adapter not detected."));
Driver.run = false;
}
}
private void btnSave_Click(object sender, EventArgs e)
{
txtSaving.Location = new Point(350, 205);
txtSaving.Visible = true;
txtSaving.Update();
if (Settings.Default.currentVersion)
{
Settings.Default.Upgrade();
Settings.Default.currentVersion = false;
}
Settings.Default["autoStart"] = cbAutoStart.Checked;
Settings.Default["startWithWindows"] = cbStartWithWindows.Checked;
Settings.Default["startInTray"] = cbStartInTray.Checked;
Settings.Default["autoUpdate"] = cbAutoUpdates.Checked;
Settings.Default["disablePortsOnExit"] = cbDisablevJoyOnExit.Checked;
Settings.Default["noEventMode"] = cbNoEventMode.Checked;
//disable joysticks we don't want, but only when a change has occured.
if ((bool)Settings.Default["port1Enabled"] != port1Enabled.Checked)
{
if (!port1Enabled.Checked)
{
JoystickHelper.DestroyJoystick(1);
}
else
{
JoystickHelper.CreateJoystick(1);
}
}
if ((bool)Settings.Default["port2Enabled"] != port2Enabled.Checked)
{
if (!port2Enabled.Checked)
{
JoystickHelper.DestroyJoystick(2);
}
else
{
JoystickHelper.CreateJoystick(2);
}
}
if ((bool)Settings.Default["port3Enabled"] != port3Enabled.Checked)
{
if (!port3Enabled.Checked)
{
JoystickHelper.DestroyJoystick(3);
}
else
{
JoystickHelper.CreateJoystick(3);
}
}
if ((bool)Settings.Default["port4Enabled"] != port4Enabled.Checked)
{
if (!port4Enabled.Checked)
{
JoystickHelper.DestroyJoystick(4);
}
else
{
JoystickHelper.CreateJoystick(4);
}
}
Settings.Default["port1Enabled"] = port1Enabled.Checked;
Settings.Default["port2Enabled"] = port2Enabled.Checked;
Settings.Default["port3Enabled"] = port3Enabled.Checked;
Settings.Default["port4Enabled"] = port4Enabled.Checked;
Settings.Default["port1AX"] = Convert.ToInt32(port1AX.Value);
Settings.Default["port1AY"] = Convert.ToInt32(port1AY.Value);
Settings.Default["port1CX"] = Convert.ToInt32(port1CX.Value);
Settings.Default["port1CY"] = Convert.ToInt32(port1CY.Value);
Settings.Default["port1LT"] = Convert.ToInt32(port1LT.Value);
Settings.Default["port1RT"] = Convert.ToInt32(port1RT.Value);
Settings.Default["port2AX"] = Convert.ToInt32(port2AX.Value);
Settings.Default["port2AY"] = Convert.ToInt32(port2AY.Value);
Settings.Default["port2CX"] = Convert.ToInt32(port2CX.Value);
Settings.Default["port2CY"] = Convert.ToInt32(port2CY.Value);
Settings.Default["port2LT"] = Convert.ToInt32(port2LT.Value);
Settings.Default["port2RT"] = Convert.ToInt32(port2RT.Value);
Settings.Default["port3AX"] = Convert.ToInt32(port3AX.Value);
Settings.Default["port3AY"] = Convert.ToInt32(port3AY.Value);
Settings.Default["port3CX"] = Convert.ToInt32(port3CX.Value);
Settings.Default["port3CY"] = Convert.ToInt32(port3CY.Value);
Settings.Default["port3LT"] = Convert.ToInt32(port3LT.Value);
Settings.Default["port3RT"] = Convert.ToInt32(port3RT.Value);
Settings.Default["port4AX"] = Convert.ToInt32(port4AX.Value);
Settings.Default["port4AY"] = Convert.ToInt32(port4AY.Value);
Settings.Default["port4CX"] = Convert.ToInt32(port4CX.Value);
Settings.Default["port4CY"] = Convert.ToInt32(port4CY.Value);
Settings.Default["port4LT"] = Convert.ToInt32(port4LT.Value);
Settings.Default["port4RT"] = Convert.ToInt32(port4RT.Value);
Settings.Default.Save();
PropogateSettings();
Log(null, new Driver.LogEventArgs("Settings saved, configuration has been updated."));
txtSaving.Visible = false;
}