//Based on http://www.holoborodko.com/pavel/downloads/NoiseRobustSecondDerivative.pdf
unsafe void CalculateCrossSectionSecondDerivs(VoxelCrossSection[] vehicleCrossSection, int oneSidedFilterLength, int frontIndex, int backIndex, double sectionThickness)
{
int M, N;
if (oneSidedFilterLength < 2)
{
oneSidedFilterLength = 2;
ThreadSafeDebugLogger.Instance.RegisterMessage("Needed to adjust filter length up");
}
else if (oneSidedFilterLength > 40)
{
oneSidedFilterLength = 40;
ThreadSafeDebugLogger.Instance.RegisterMessage("Reducing filter length to prevent overflow");
}
M = oneSidedFilterLength;
N = M * 2 + 1;
long* sK = stackalloc long[M + 1];
//double* areas = stackalloc double[N + 2];
for (int i = 0; i <= M; i++)
{
sK[i] = CalculateSk(i, M, N);
}
double denom = Math.Pow(2, N - 3);
denom *= sectionThickness * sectionThickness;
denom = 1 / denom;
int lowIndex, highIndex;
lowIndex = Math.Max(frontIndex - 1, 0);
highIndex = Math.Min(backIndex + 1, vehicleCrossSection.Length - 1);
for (int i = lowIndex + M; i <= highIndex - M; i++)
{
double secondDeriv = 0;
if(i >= frontIndex && i <= backIndex)
secondDeriv = sK[0] * vehicleCrossSection[i].area;
for (int k = 1; k <= M; k++)
{
double forwardArea, backwardArea;
if (i + k <= backIndex)
backwardArea = vehicleCrossSection[i + k].area;
else
backwardArea = 0;// (vehicleCrossSection[backIndex].area - vehicleCrossSection[backIndex - 1].area) * (i + k - backIndex) + vehicleCrossSection[backIndex].area;
if (i - k >= frontIndex)
forwardArea = vehicleCrossSection[i - k].area;
else
forwardArea = 0;// (vehicleCrossSection[frontIndex].area - vehicleCrossSection[frontIndex + 1].area) * (i - k - frontIndex) + vehicleCrossSection[frontIndex].area; ;// vehicleCrossSection[frontIndex].area;
secondDeriv += sK[k] * (forwardArea + backwardArea);
}
vehicleCrossSection[i].secondAreaDeriv = secondDeriv * denom;
//ThreadSafeDebugLogger.Instance.RegisterMessage(vehicleCrossSection[i].secondAreaDeriv.ToString());
}
//forward difference
for (int i = frontIndex; i < lowIndex + M; i++)
{
double secondDeriv = 0;
secondDeriv += vehicleCrossSection[i].area;
if(i + 2 <= backIndex)
secondDeriv += vehicleCrossSection[i + 2].area;
if (i + 1 <= backIndex)
secondDeriv -= 2 * vehicleCrossSection[i + 1].area;
secondDeriv /= sectionThickness * sectionThickness;
vehicleCrossSection[i].secondAreaDeriv = secondDeriv;
}
//backward difference
for (int i = highIndex - M + 1; i <= backIndex; i++)
{
double secondDeriv = 0;
secondDeriv += vehicleCrossSection[i].area;
if (i - 2 >= frontIndex)
secondDeriv += vehicleCrossSection[i - 2].area;
if (i - 1 >= frontIndex)
secondDeriv -= 2 * vehicleCrossSection[i - 1].area;
secondDeriv /= sectionThickness * sectionThickness;
vehicleCrossSection[i].secondAreaDeriv = secondDeriv;
}
}
unsafe void AdjustCrossSectionForAirDucting(VoxelCrossSection[] vehicleCrossSection, List<GeometryPartModule> geometryModules, int front, int back, ref double maxCrossSectionArea)
{
//double* areaAdjustment = stackalloc double[vehicleCrossSection.Length];
for (int i = 0; i < geometryModules.Count; i++)
{
GeometryPartModule g = geometryModules[i];
g.GetICrossSectionAdjusters(activeAdjusters, _worldToLocalMatrix, _vehicleMainAxis);
}
double intakeArea = 0;
double engineExitArea = 0;
for (int i = 0; i < activeAdjusters.Count; i++) //get all forward facing engines / intakes
{
ICrossSectionAdjuster adjuster = activeAdjusters[i];
if (adjuster is AirbreathingEngineCrossSectonAdjuster)
engineExitArea += Math.Abs(adjuster.AreaRemovedFromCrossSection());
if (adjuster is IntakeCrossSectionAdjuster)
intakeArea += Math.Abs(adjuster.AreaRemovedFromCrossSection());
if(adjuster is IntegratedIntakeEngineCrossSectionAdjuster)
{
engineExitArea += Math.Abs(adjuster.AreaRemovedFromCrossSection());
intakeArea += Math.Abs(adjuster.AreaRemovedFromCrossSection());
}
}
//ThreadSafeDebugLogger.Instance.RegisterMessage(intakeArea + " " + engineExitArea);
if (intakeArea != 0 && engineExitArea != 0) //if they exist, go through the calculations
{
if (_ductedAreaAdjustment.Length != vehicleCrossSection.Length)
_ductedAreaAdjustment = new double[vehicleCrossSection.Length];
int frontMostIndex = -1, backMostIndex = -1;
//sweep through entire vehicle
for (int i = 0; i < _ductedAreaAdjustment.Length; i++)
{
double ductedArea = 0; //area based on the voxel size
//double actualArea = 0; //area based on intake and engine data
double voxelCountScale = _voxelElementSize * _voxelElementSize;
//and all the intakes / engines
if (i >= front && i <= back)
{
for (int j = 0; j < activeAdjusters.Count; j++)
{
ICrossSectionAdjuster adjuster = activeAdjusters[j];
if (adjuster.IntegratedCrossSectionIncreaseDecrease())
continue;
if (adjuster.AreaRemovedFromCrossSection() == 0)
continue;
VoxelCrossSection.SideAreaValues val;
Part p = adjuster.GetPart();
//see if you can find that in this section
if (vehicleCrossSection[i].partSideAreaValues.TryGetValue(p, out val))
{
if (adjuster.AreaRemovedFromCrossSection() > 0)
{
//actualArea += adjuster.AreaRemovedFromCrossSection();
ductedArea += Math.Max(0, val.crossSectionalAreaCount * voxelCountScale + adjuster.AreaThreshold());
}
else
{
//actualArea -= adjuster.AreaRemovedFromCrossSection();
ductedArea -= Math.Max(0, val.crossSectionalAreaCount * voxelCountScale + adjuster.AreaThreshold());
}
}
}
ductedArea *= 0.75;
//if (Math.Abs(actualArea) < Math.Abs(ductedArea))
// ductedArea = actualArea;
if (ductedArea != 0)
if (frontMostIndex < 0)
frontMostIndex = i;
else
backMostIndex = i;
}
_ductedAreaAdjustment[i] = ductedArea;
}
double tmpArea = _ductedAreaAdjustment[0];
for (int i = 1; i < _ductedAreaAdjustment.Length; i++)
{
double areaAdjustment = _ductedAreaAdjustment[i];
double prevAreaAdjustment = tmpArea;
tmpArea = areaAdjustment; //store for next iteration
if (areaAdjustment > 0 && prevAreaAdjustment > 0)
{
double areaChange = areaAdjustment - prevAreaAdjustment;
if (areaChange > 0)
_ductedAreaAdjustment[i] = areaChange; //this transforms this into a change in area, but only for increases (intakes)
else
{
tmpArea = prevAreaAdjustment;
_ductedAreaAdjustment[i] = 0;
}
}
}
tmpArea = _ductedAreaAdjustment[_ductedAreaAdjustment.Length - 1];
for (int i = _ductedAreaAdjustment.Length - 1; i >= 0; i--)
{
double areaAdjustment = _ductedAreaAdjustment[i];
double prevAreaAdjustment = tmpArea;
tmpArea = areaAdjustment; //store for next iteration
if (areaAdjustment < 0 && prevAreaAdjustment < 0)
{
double areaChange = areaAdjustment - prevAreaAdjustment;
if (areaChange < 0)
_ductedAreaAdjustment[i] = areaChange; //this transforms this into a change in area, but only for decreases (engines)
else
{
tmpArea = prevAreaAdjustment;
_ductedAreaAdjustment[i] = 0;
}
}
}
for (int i = _ductedAreaAdjustment.Length - 1; i >= 0; i--)
{
double areaAdjustment = 0;
for (int j = 0; j <= i; j++)
areaAdjustment += _ductedAreaAdjustment[j];
_ductedAreaAdjustment[i] = areaAdjustment;
//ThreadSafeDebugLogger.Instance.RegisterMessage(areaAdjustment.ToString());
}
for (int i = 0; i < vehicleCrossSection.Length; i++)
{
double ductedArea = 0; //area based on the voxel size
double actualArea = 0; //area based on intake and engine data
//and all the intakes / engines
for (int j = 0; j < activeAdjusters.Count; j++)
{
ICrossSectionAdjuster adjuster = activeAdjusters[j];
if (!adjuster.IntegratedCrossSectionIncreaseDecrease())
continue;
VoxelCrossSection.SideAreaValues val;
Part p = adjuster.GetPart();
//see if you can find that in this section
if (vehicleCrossSection[i].partSideAreaValues.TryGetValue(p, out val))
{
ductedArea += val.crossSectionalAreaCount;
actualArea += adjuster.AreaRemovedFromCrossSection();
}
//ThreadSafeDebugLogger.Instance.RegisterMessage(ductedArea.ToString());
}
ductedArea *= _voxelElementSize * _voxelElementSize * 0.75;
if (Math.Abs(actualArea) < Math.Abs(ductedArea))
ductedArea = actualArea;
if (ductedArea != 0)
if (i < frontMostIndex)
frontMostIndex = i;
else if (i > backMostIndex)
backMostIndex = i;
_ductedAreaAdjustment[i] += ductedArea;
}
int index = _ductedAreaAdjustment.Length - 1;
double endVoxelArea = _ductedAreaAdjustment[index];
double currentArea = endVoxelArea;
while(currentArea > 0)
{
currentArea -= endVoxelArea;
_ductedAreaAdjustment[index] = currentArea;
--index;
if (index < 0)
break;
currentArea = _ductedAreaAdjustment[index];
}
maxCrossSectionArea = 0;
//put upper limit on area lost
for (int i = 0; i < vehicleCrossSection.Length; i++)
{
double areaUnchanged = vehicleCrossSection[i].area;
double areaChanged = -_ductedAreaAdjustment[i];
if (areaChanged > 0)
areaChanged = 0;
areaChanged += areaUnchanged;
double tmpTotalArea = Math.Max(0.15 * areaUnchanged, areaChanged);
if (tmpTotalArea > maxCrossSectionArea)
maxCrossSectionArea = tmpTotalArea;
vehicleCrossSection[i].area = tmpTotalArea;
}
}
activeAdjusters.Clear();
}
private double CriticalMachFactorForUnsmoothCrossSection(VoxelCrossSection[] crossSections, double finenessRatio, double sectionThickness)
{
double maxAbsRateOfChange = 0;
double maxSecondDeriv = 0;
double prevArea = 0;
double invSectionThickness = 1/ sectionThickness;
for(int i = 0; i < crossSections.Length; i++)
{
double currentArea = crossSections[i].area;
double absRateOfChange = Math.Abs(currentArea - prevArea) * invSectionThickness;
if (absRateOfChange > maxAbsRateOfChange)
maxAbsRateOfChange = absRateOfChange;
prevArea = currentArea;
maxSecondDeriv = Math.Max(maxSecondDeriv, Math.Abs(crossSections[i].secondAreaDeriv));
}
//double normalizedRateOfChange = maxAbsRateOfChange / _maxCrossSectionArea;
double maxCritMachAdjustmentFactor = 2 * _maxCrossSectionArea + 5 * (0.5 * maxAbsRateOfChange + 0.3 * maxSecondDeriv);
maxCritMachAdjustmentFactor = 0.5 + (_maxCrossSectionArea - 0.5 * (0.5 * maxAbsRateOfChange + 0.3 * maxSecondDeriv)) / maxCritMachAdjustmentFactor; //will vary based on x = maxAbsRateOfChange / _maxCrossSectionArea from 1 @ x = 0 to 0.5 as x -> infinity
double critAdjustmentFactor = 4 + finenessRatio;
critAdjustmentFactor = 2 * (1 - maxCritMachAdjustmentFactor) / critAdjustmentFactor;
critAdjustmentFactor += maxCritMachAdjustmentFactor;
if (critAdjustmentFactor > 1)
critAdjustmentFactor = 1;
return critAdjustmentFactor;
}
//Smooths out area and area 2nd deriv distributions to deal with noise in the representation
unsafe void GaussianSmoothCrossSections(VoxelCrossSection[] vehicleCrossSection, double stdDevCutoff, double lengthPercentFactor, double sectionThickness, double length, int frontIndex, int backIndex, int areaSmoothingIterations, int derivSmoothingIterations)
{
double stdDev = length * lengthPercentFactor;
int numVals = (int)Math.Ceiling(stdDevCutoff * stdDev / sectionThickness);
if (numVals <= 1)
return;
double* gaussianFactors = stackalloc double[numVals];
double* prevUncorrectedVals = stackalloc double[numVals];
double* futureUncorrectedVals = stackalloc double[numVals - 1];
/* double[] gaussianFactors = new double[numVals];
double[] prevUncorrectedVals = new double[numVals];
double[] futureUncorrectedVals = new double[numVals - 1];*/
double invVariance = 1 / (stdDev * stdDev);
//calculate Gaussian factors for each of the points that will be hit
for (int i = 0; i < numVals; i++)
{
double factor = (i * sectionThickness);
factor *= factor;
gaussianFactors[i] = Math.Exp(-0.5 * factor * invVariance);
}
//then sum them up...
double sum = 0;
for (int i = 0; i < numVals; i++)
if (i == 0)
sum += gaussianFactors[i];
else
sum += 2 * gaussianFactors[i];
double invSum = 1 / sum; //and then use that to normalize the factors
for (int i = 0; i < numVals; i++)
{
gaussianFactors[i] *= invSum;
}
//first smooth the area itself. This has a greater effect on the 2nd deriv due to the effect of noise on derivatives
for (int j = 0; j < areaSmoothingIterations; j++)
{
for (int i = 0; i < numVals; i++)
prevUncorrectedVals[i] = vehicleCrossSection[frontIndex].area; //set all the vals to 0 to prevent screwups between iterations
for (int i = frontIndex; i <= backIndex; i++) //area smoothing pass
{
for (int k = numVals - 1; k > 0; k--)
{
prevUncorrectedVals[k] = prevUncorrectedVals[k - 1]; //shift prev vals down
}
double curValue = vehicleCrossSection[i].area;
prevUncorrectedVals[0] = curValue; //and set the central value
for (int k = 0; k < numVals - 1; k++) //update future vals
{
if (i + k < backIndex)
futureUncorrectedVals[k] = vehicleCrossSection[i + k + 1].area;
else
futureUncorrectedVals[k] = vehicleCrossSection[backIndex].area;
}
curValue = 0; //zero for coming calculations...
double borderScaling = 1; //factor to correct for the 0s lurking at the borders of the curve...
for (int k = 0; k < numVals; k++)
{
double val = prevUncorrectedVals[k];
double gaussianFactor = gaussianFactors[k];
curValue += gaussianFactor * val; //central and previous values;
if (val == 0)
borderScaling -= gaussianFactor;
}
for (int k = 0; k < numVals - 1; k++)
{
double val = futureUncorrectedVals[k];
double gaussianFactor = gaussianFactors[k + 1];
curValue += gaussianFactor * val; //future values
if (val == 0)
borderScaling -= gaussianFactor;
}
if (borderScaling > 0)
curValue /= borderScaling; //and now all of the 0s beyond the edge have been removed
vehicleCrossSection[i].area = curValue;
}
}
CalculateCrossSectionSecondDerivs(vehicleCrossSection, numVals, frontIndex, backIndex, sectionThickness);
//and now smooth the derivs
for (int j = 0; j < derivSmoothingIterations; j++)
{
for (int i = 0; i < numVals; i++)
prevUncorrectedVals[i] = vehicleCrossSection[frontIndex].secondAreaDeriv; //set all the vals to 0 to prevent screwups between iterations
for (int i = frontIndex; i <= backIndex; i++) //deriv smoothing pass
{
for (int k = numVals - 1; k > 0; k--)
{
prevUncorrectedVals[k] = prevUncorrectedVals[k - 1]; //shift prev vals down
}
double curValue = vehicleCrossSection[i].secondAreaDeriv;
prevUncorrectedVals[0] = curValue; //and set the central value
for (int k = 0; k < numVals - 1; k++) //update future vals
{
if (i + k < backIndex)
futureUncorrectedVals[k] = vehicleCrossSection[i + k + 1].secondAreaDeriv;
else
futureUncorrectedVals[k] = vehicleCrossSection[backIndex].secondAreaDeriv;
}
curValue = 0; //zero for coming calculations...
double borderScaling = 1; //factor to correct for the 0s lurking at the borders of the curve...
for (int k = 0; k < numVals; k++)
{
double val = prevUncorrectedVals[k];
double gaussianFactor = gaussianFactors[k];
curValue += gaussianFactor * val; //central and previous values;
if (val == 0)
borderScaling -= gaussianFactor;
}
for (int k = 0; k < numVals - 1; k++)
{
double val = futureUncorrectedVals[k];
double gaussianFactor = gaussianFactors[k + 1];
curValue += gaussianFactor * val; //future values
if (val == 0)
borderScaling -= gaussianFactor;
}
if (borderScaling > 0)
curValue /= borderScaling; //and now all of the 0s beyond the edge have been removed
vehicleCrossSection[i].secondAreaDeriv = curValue;
}
}
}
private double CalcAllTransonicWaveDrag(VoxelCrossSection[] sections, int front, int numSections, double sectionThickness)
{
double drag = 0;
double Lj;
for(int j = 0; j < numSections; j++)
{
double accumulator = 0;
Lj = (j + 0.5) * Math.Log(j + 0.5);
if (j > 0)
Lj -= (j - 0.5) * Math.Log(j - 0.5);
for(int i = j; i < numSections; i++)
{
accumulator += sections[front + i].secondAreaDeriv * sections[front + i - j].secondAreaDeriv;
}
drag += accumulator * Lj;
}
drag *= -sectionThickness * sectionThickness / Math.PI;
return drag;
}
private double CalculateCpLinearBackward(VoxelCrossSection[] vehicleCrossSection, int index, int back, double beta, double sectionThickness, double maxCrossSection)
{
double cP = 0;
double cutoff = maxCrossSection * 2;//Math.Min(maxCrossSection * 0.1, vehicleCrossSection[index].area * 0.25);
double tmp1, tmp2;
tmp1 = indexSqrt[back + 2 - index];
for (int i = back + 1; i >= index; i--)
{
double tmp;
//tmp2 = Math.Sqrt(tmp);
tmp2 = indexSqrt[i - index];
tmp = tmp1 - tmp2;
tmp1 = tmp2;
if (i < vehicleCrossSection.Length)
tmp *= MathClampAbs(vehicleCrossSection[i].secondAreaDeriv, cutoff);
else
tmp *= 0;
cP += tmp;
}
double avgArea = vehicleCrossSection[index].area;
/*if (index < vehicleCrossSection.Length - 1)
{
avgArea += vehicleCrossSection[index + 1].area;
}
avgArea *= 0.5;*/
cP *= Math.Sqrt(0.5 * sectionThickness / (beta * Math.Sqrt(Math.PI * avgArea)));
return cP;
}
//Taken from Appendix A of NASA TR R-213
private double CalculateCpLinearForward(VoxelCrossSection[] vehicleCrossSection, int index, int front, double beta, double sectionThickness, double maxCrossSection)
{
double cP = 0;
double cutoff = maxCrossSection * 2;//Math.Min(maxCrossSection * 0.1, vehicleCrossSection[index].area * 0.25);
double tmp1, tmp2;
tmp1 = indexSqrt[index - (front - 2)];
for (int i = front - 1; i <= index; i++)
{
double tmp;
//tmp2 = Math.Sqrt(tmp);
tmp2 = indexSqrt[index - i];
tmp = tmp1 - tmp2;
tmp1 = tmp2;
if (i >= 0)
tmp *= MathClampAbs(vehicleCrossSection[i].secondAreaDeriv, cutoff);
else
tmp *= 0;
cP += tmp;
}
double avgArea = vehicleCrossSection[index].area;
/*if(index > 0)
{
avgArea += vehicleCrossSection[index - 1].area;
}
avgArea *= 0.5;*/
cP *= Math.Sqrt(0.5 * sectionThickness / (beta * Math.Sqrt(Math.PI * avgArea)));
return cP;
}
private void CalculateSonicPressure(VoxelCrossSection[] vehicleCrossSection, int front, int back, double sectionThickness, double maxCrossSection)
{
lock (_commonLocker)
if (vehicleCrossSection.Length > indexSqrt.Length + 1)
indexSqrt = GenerateIndexSqrtLookup(vehicleCrossSection.Length + 2);
double machTest = 1.2;
double beta = Math.Sqrt(machTest * machTest - 1);
double cP90 = CalcMaxCp(machTest);
//double noseAreaSlope = (vehicleCrossSection[front].area) / sectionThickness;
for (int i = front; i <= back; i++)
{
double cP = CalculateCpLinearForward(vehicleCrossSection, i, front, beta, sectionThickness, double.PositiveInfinity);
//cP += CalculateCpNoseDiscont(i - front, noseAreaSlope, sectionThickness);
cP *= -0.5;
cP = AdjustVelForFinitePressure(cP);
cP *= -2;
if (cP < 0)
cP = AdjustCpForNonlinearEffects(cP, beta, machTest);
if (cP > cP90)
cP = cP90;
vehicleCrossSection[i].cpSonicForward = cP;
}
//noseAreaSlope = (vehicleCrossSection[back].area) / sectionThickness;
for (int i = back; i >= front; i--)
{
double cP = CalculateCpLinearBackward(vehicleCrossSection, i, back, beta, sectionThickness, double.PositiveInfinity);
//cP += CalculateCpNoseDiscont(back - i, noseAreaSlope, sectionThickness);
cP *= -0.5;
cP = AdjustVelForFinitePressure(cP);
cP *= -2;
if (cP < 0)
cP = AdjustCpForNonlinearEffects(cP, beta, machTest);
if (cP > cP90)
cP = cP90;
vehicleCrossSection[i].cpSonicBackward = cP;
}
}
public void CrossSectionData(VoxelCrossSection[] crossSections, Vector3 orientationVector, out int frontIndex, out int backIndex, out double sectionThickness, out double maxCrossSectionArea)
{
//TODO: Look into setting better limits for iterating over sweep plane to improve off-axis performance
double wInc;
Vector4d plane = CalculateEquationOfSweepPlane(orientationVector, out wInc);
double x, y, z;
x = Math.Abs(plane.x);
y = Math.Abs(plane.y);
z = Math.Abs(plane.z);
double elementArea = elementSize * elementSize;
bool frontIndexFound = false;
frontIndex = 0;
backIndex = crossSections.Length - 1;
sectionThickness = elementSize;
Matrix4x4 sectionNormalToVesselCoords = Matrix4x4.TRS(Vector3.zero, Quaternion.FromToRotation(new Vector3(0, 0, 1), orientationVector), Vector3.one);
Matrix4x4 vesselToSectionNormal = sectionNormalToVesselCoords.inverse;
//Code has multiple optimizations to take advantage of the limited rnage of values that are included. They are listed below
//(int)Math.Ceiling(x) -> (int)(x + 1) for x > 0
//(int)Math.Round(x) -> (int)(x + 0.5f) for x > 0
//(int)Math.Floor(x) -> (int)(x) for x > 0
//Check y first, since it is most likely to be the flow direction
if (y >= z && y >= x)
{
int sectionCount = yCellLength + (int)(xCellLength * x / y + 1) + (int)(zCellLength * z / y + 1);
sectionCount = Math.Min(sectionCount, crossSections.Length);
double angleSizeIncreaseFactor = Math.Sqrt((x + y + z) / y);
elementArea *= angleSizeIncreaseFactor; //account for different angles effects on voxel cube's projected area
double invMag = 1 / Math.Sqrt(x * x + y * y + z * z);
sectionThickness *= y * invMag;
double xNorm, yNorm, zNorm;
xNorm = plane.x * invMag;
yNorm = plane.y * invMag;
zNorm = plane.z * invMag;
double yAbsNorm = Math.Abs(yNorm);
int xSectArrayLength = (int)(xCellLength * yAbsNorm + yCellLength * Math.Abs(xNorm) + 1);
//Stack allocation of array allows removal of garbage collection issues
//bool* sectionArray = stackalloc bool[xSectArrayLength * (int)(zCellLength * yAbsNorm + yCellLength * Math.Abs(zNorm) + 1)];
//bool[,] sectionRepresentation = new bool[(int)Math.Ceiling(xCellLength * Math.Abs(yNorm) + yCellLength * Math.Abs(xNorm)), (int)Math.Ceiling(zCellLength * Math.Abs(yNorm) + yCellLength * Math.Abs(zNorm))];
double invYPlane = 1 / plane.y;
plane.x *= invYPlane;
plane.z *= invYPlane;
plane.w *= invYPlane;
wInc *= invYPlane;
plane.w -= 0.5; //shift the plane to auto-account for midpoint rounding, allowing it to be simple casts to int
for (int m = 0; m < sectionCount; m++)
{
double areaCount = 0;
//Vector3d centroid = Vector3d.zero;
double centx, centy, centz;
centx = centy = centz = 0;
//int unshadowedAreaCount = 0;
//Vector3d unshadowedCentroid = Vector3d.zero;
//int unshadowedCentx, unshadowedCenty, unshadowedCentz;
//unshadowedCentx = unshadowedCenty = unshadowedCentz = 0;
double i_xx = 0, i_xy = 0, i_yy = 0;
Dictionary<Part, VoxelCrossSection.SideAreaValues> partSideAreas = crossSections[m].partSideAreaValues;
partSideAreas.Clear();
for (int iOverall = 0; iOverall < xCellLength; iOverall += 8) //Overall ones iterate over the actual voxel indices (to make use of the equation of the plane) but are used to get chunk indices
for (int kOverall = 0; kOverall < zCellLength; kOverall += 8)
{
int jSect1, jSect2, jSect3;
if (plane.x * plane.z > 0.0) //Determine high and low points on this quad of the plane
{
jSect1 = (int)(-(plane.x * iOverall + plane.z * kOverall + plane.w)); //End points of the plane
jSect3 = (int)(-(plane.x * (iOverall + 7) + plane.z * (kOverall + 7) + plane.w));
}
else
{
jSect1 = (int)(-(plane.x * (iOverall + 7) + plane.z * kOverall + plane.w));
jSect3 = (int)(-(plane.x * iOverall + plane.z * (kOverall + 7) + plane.w));
}
jSect2 = (int)((jSect1 + jSect3) * 0.5); //Central point
int jMin = Math.Min(jSect1, jSect3);
int jMax = Math.Max(jSect1, jSect3) + 1;
jSect1 = jMin >> 3;
jSect2 = jSect2 >> 3;
jSect3 = (jMax - 1) >> 3;
if (jSect1 >= yLength) //if the smallest sect is above the limit, they all are
continue;
if (jSect3 < 0) //if the largest sect is below the limit, they all are
continue;
if (jSect1 == jSect3) //If chunk indices are identical, only get that one and it's very simple; only need to check 1 and 3, because if any are different, it must be those
{
if (jSect1 < 0)
continue;
VoxelChunk sect = voxelChunks[iOverall >> 3, jSect1, kOverall >> 3];
if (sect == null)
continue;
for (int i = iOverall; i < iOverall + 8; i++) //Finally, iterate over the chunk
{
double tmp = plane.x * i + plane.w;
for (int k = kOverall; k < kOverall + 8; k++)
{
int j = (int)(-(plane.z * k + tmp));
if (j < jMin || j > jMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair = sect.GetVoxelPartSizePairGlobalIndex(index);
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
else //Two or three different indices requires separate handling
{
VoxelChunk sect1 = null, sect2 = null, sect3 = null;
int iSect = iOverall >> 3;
int kSect = kOverall >> 3;
bool validSects = false;
if (!(jSect1 < 0)) //this block ensures that there are sections here to check
{
sect1 = voxelChunks[iSect, jSect1, kSect];
if (sect1 != null)
validSects = true;
}
if (!(jSect2 < 0 || jSect2 >= yLength))
{
sect2 = voxelChunks[iSect, jSect2, kSect];
if (sect2 != null && sect2 != sect1)
validSects |= true;
}
if (!(jSect3 >= yLength))
{
sect3 = voxelChunks[iSect, jSect3, kSect];
if (sect3 != null && (sect3 != sect2 && sect3 != sect1))
validSects |= true;
}
if (!validSects)
continue;
for (int i = iOverall; i < iOverall + 8; i++)
{
double tmp = plane.x * i + plane.w;
for (int k = kOverall; k < kOverall + 8; k++)
{
int j = (int)(-(plane.z * k + tmp));
if (j < jMin || j > jMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair;
int jSect = j >> 3;
if (jSect == jSect1 && sect1 != null)
pair = sect1.GetVoxelPartSizePairGlobalIndex(index);
else if (jSect == jSect2 && sect2 != null)
pair = sect2.GetVoxelPartSizePairGlobalIndex(index);
else if (jSect == jSect3 && sect3 != null)
pair = sect3.GetVoxelPartSizePairGlobalIndex(index);
else
continue;
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
}
Vector3d centroid = new Vector3d(centx, centy, centz);
//Vector3d unshadowedCentroid = new Vector3d(unshadowedCentx, unshadowedCenty, unshadowedCentz);
if (areaCount > 0)
{
if (frontIndexFound)
backIndex = m;
else
{
frontIndexFound = true;
frontIndex = m;
}
centroid /= areaCount;
/*if (unshadowedAreaCount != 0)
unshadowedCentroid /= unshadowedAreaCount;
else
unshadowedCentroid = centroid;*/
}
Vector3 localCentroid = vesselToSectionNormal.MultiplyVector(centroid);
i_xx -= areaCount * localCentroid.x * localCentroid.x;
i_xy -= areaCount * localCentroid.x * localCentroid.y;
i_yy -= areaCount * localCentroid.y * localCentroid.y;
double tanPrinAngle = TanPrincipalAxisAngle(i_xx, i_yy, i_xy);
Vector3 axis1 = new Vector3(1, 0, 0), axis2 = new Vector3(0, 0, 1);
double flatnessRatio = 1;
if (tanPrinAngle != 0)
{
axis1 = new Vector3(1, 0, (float)tanPrinAngle);
axis1.Normalize();
axis2 = new Vector3(axis1.z, 0, -axis1.x);
flatnessRatio = i_xy * axis2.z / axis2.x + i_xx;
flatnessRatio = (i_xy * tanPrinAngle + i_xx) / flatnessRatio;
flatnessRatio = Math.Sqrt(Math.Sqrt(flatnessRatio));
}
if (double.IsNaN(flatnessRatio))
flatnessRatio = 1;
Vector3 principalAxis;
if (flatnessRatio > 1)
principalAxis = axis1;
else
{
flatnessRatio = 1 / flatnessRatio;
principalAxis = axis2;
}
if (flatnessRatio > 10)
flatnessRatio = 10;
principalAxis = sectionNormalToVesselCoords.MultiplyVector(principalAxis);
crossSections[m].centroid = centroid * elementSize + lowerRightCorner;
crossSections[m].area = areaCount * elementArea;
crossSections[m].flatnessRatio = flatnessRatio;
crossSections[m].flatNormalVector = principalAxis;
plane.w += wInc;
}
}
else if (x > y && x > z)
{
int sectionCount = xCellLength + (int)(yCellLength * y / x + 1) + (int)(zCellLength * z / x + 1);
sectionCount = Math.Min(sectionCount, crossSections.Length);
double angleSizeIncreaseFactor = Math.Sqrt((x + y + z) / x);
elementArea *= angleSizeIncreaseFactor; //account for different angles effects on voxel cube's projected area
double invMag = 1 / Math.Sqrt(x * x + y * y + z * z);
sectionThickness *= x * invMag;
double xNorm, yNorm, zNorm;
xNorm = plane.x * invMag;
yNorm = plane.y * invMag;
zNorm = plane.z * invMag;
double xAbsNorm = Math.Abs(xNorm);
double i_xx = 0, i_xy = 0, i_yy = 0;
int ySectArrayLength = (int)(xCellLength * Math.Abs(yNorm) + yCellLength * xAbsNorm + 1);
//Stack allocation of array allows removal of garbage collection issues
//bool* sectionArray = stackalloc bool[ySectArrayLength * (int)(zCellLength * xAbsNorm + xCellLength * Math.Abs(zNorm) + 1)];
//bool[,] sectionRepresentation = new bool[(int)Math.Ceiling(xCellLength * Math.Abs(yNorm) + yCellLength * Math.Abs(xNorm)), (int)Math.Ceiling(zCellLength * Math.Abs(xNorm) + xCellLength * Math.Abs(zNorm))];
double invXPlane = 1 / plane.x;
plane.y *= invXPlane;
plane.z *= invXPlane;
plane.w *= invXPlane;
wInc *= invXPlane;
for (int m = 0; m < sectionCount; m++)
{
double areaCount = 0;
//Vector3d centroid = Vector3d.zero;
double centx, centy, centz;
centx = centy = centz = 0;
//int unshadowedAreaCount = 0;
//Vector3d unshadowedCentroid = Vector3d.zero;
//int unshadowedCentx, unshadowedCenty, unshadowedCentz;
//unshadowedCentx = unshadowedCenty = unshadowedCentz = 0;
Dictionary<Part, VoxelCrossSection.SideAreaValues> partSideAreas = crossSections[m].partSideAreaValues;
partSideAreas.Clear();
for (int jOverall = 0; jOverall < yCellLength; jOverall += 8)
for (int kOverall = 0; kOverall < zCellLength; kOverall += 8)
{
int iSect1, iSect2, iSect3;
if (plane.y * plane.z > 0)
{
iSect1 = (int)(-(plane.y * jOverall + plane.z * kOverall + plane.w) + 0.5);
iSect3 = (int)(-(plane.y * (jOverall + 7) + plane.z * (kOverall + 7) + plane.w) + 0.5);
}
else
{
iSect1 = (int)(-(plane.y * (jOverall + 7) + plane.z * kOverall + plane.w) + 0.5);
iSect3 = (int)(-(plane.y * jOverall + plane.z * (kOverall + 7) + plane.w) + 0.5);
}
iSect2 = (int)((iSect1 + iSect3) * 0.5);
int iMin = Math.Min(iSect1, iSect3);
int iMax = Math.Max(iSect1, iSect3) + 1;
iSect1 = iMin >> 3;
iSect2 = iSect2 >> 3;
iSect3 = (iMax - 1) >> 3;
if (iSect1 >= xLength) //if the smallest sect is above the limit, they all are
continue;
if (iSect3 < 0) //if the largest sect is below the limit, they all are
continue;
if (iSect1 == iSect3)
{
if (iSect1 < 0)
continue;
VoxelChunk sect = voxelChunks[iSect1, jOverall >> 3, kOverall >> 3];
if (sect == null)
continue;
for (int j = jOverall; j < jOverall + 8; j++)
{
double tmp = plane.y * j + plane.w;
for (int k = kOverall; k < kOverall + 8; k++)
{
int i = (int)(-(plane.z * k + tmp) + 0.5);
if (i < iMin || i > iMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair = sect.GetVoxelPartSizePairGlobalIndex(index);
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
else
{
VoxelChunk sect1 = null, sect2 = null, sect3 = null;
int jSect = jOverall >> 3;
int kSect = kOverall >> 3;
bool validSects = false;
if (!(iSect1 < 0))
{
sect1 = voxelChunks[iSect1, jSect, kSect];
if (sect1 != null)
validSects = true;
}
if (!(iSect2 < 0 || iSect2 >= xLength))
{
sect2 = voxelChunks[iSect2, jSect, kSect];
if (sect2 != null && sect2 != sect1)
validSects |= true;
}
if (!(iSect3 >= xLength))
{
sect3 = voxelChunks[iSect3, jSect, kSect];
if (sect3 != null && (sect3 != sect2 && sect3 != sect1))
validSects |= true;
}
if (!validSects)
continue;
for (int j = jOverall; j < jOverall + 8; j++)
{
double tmp = plane.y * j + plane.w;
for (int k = kOverall; k < kOverall + 8; k++)
{
int i = (int)(-(plane.z * k + tmp) + 0.5);
if (i < iMin || i > iMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair;
int iSect = i >> 3;
if (iSect == iSect1 && sect1 != null)
pair = sect1.GetVoxelPartSizePairGlobalIndex(index);
else if (iSect == iSect2 && sect2 != null)
pair = sect2.GetVoxelPartSizePairGlobalIndex(index);
else if (iSect == iSect3 && sect3 != null)
pair = sect3.GetVoxelPartSizePairGlobalIndex(index);
else
continue;
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
}
Vector3d centroid = new Vector3d(centx, centy, centz);
//Vector3d unshadowedCentroid = new Vector3d(unshadowedCentx, unshadowedCenty, unshadowedCentz);
if (areaCount > 0)
{
if (frontIndexFound)
backIndex = m;
else
{
frontIndexFound = true;
frontIndex = m;
}
centroid /= areaCount;
/*if (unshadowedAreaCount != 0)
unshadowedCentroid /= unshadowedAreaCount;
else
unshadowedCentroid = centroid;*/
}
Vector3 localCentroid = vesselToSectionNormal.MultiplyVector(centroid);
i_xx -= areaCount * localCentroid.x * localCentroid.x;
i_xy -= areaCount * localCentroid.x * localCentroid.y;
i_yy -= areaCount * localCentroid.y * localCentroid.y;
double tanPrinAngle = TanPrincipalAxisAngle(i_xx, i_yy, i_xy);
Vector3 axis1 = new Vector3(1, 0, 0), axis2 = new Vector3(0, 0, 1);
double flatnessRatio = 1;
if (tanPrinAngle != 0)
{
axis1 = new Vector3(1, 0, (float)tanPrinAngle);
axis1.Normalize();
axis2 = new Vector3(axis1.z, 0, -axis1.x);
flatnessRatio = i_xy * axis2.z / axis2.x + i_xx;
flatnessRatio = (i_xy * tanPrinAngle + i_xx) / flatnessRatio;
flatnessRatio = Math.Sqrt(Math.Sqrt(flatnessRatio));
}
if (double.IsNaN(flatnessRatio))
flatnessRatio = 1;
Vector3 principalAxis;
if (flatnessRatio > 1)
principalAxis = axis1;
else
{
flatnessRatio = 1 / flatnessRatio;
principalAxis = axis2;
}
if (flatnessRatio > 10)
flatnessRatio = 10;
principalAxis = sectionNormalToVesselCoords.MultiplyVector(principalAxis);
crossSections[m].centroid = centroid * elementSize + lowerRightCorner;
//crossSections[m].additonalUnshadowedCentroid = unshadowedCentroid * elementSize + lowerRightCorner;
crossSections[m].area = areaCount * elementArea;
crossSections[m].flatnessRatio = flatnessRatio;
crossSections[m].flatNormalVector = principalAxis;
//crossSections[m].additionalUnshadowedArea = unshadowedAreaCount * elementArea;
plane.w += wInc;
}
}
else
{
int sectionCount = zCellLength + (int)(xCellLength * x / z + 1) + (int)(yCellLength * y / z + 1);
sectionCount = Math.Min(sectionCount, crossSections.Length);
double angleSizeIncreaseFactor = Math.Sqrt((x + y + z) / z); //account for different angles effects on voxel cube's projected area
elementArea *= angleSizeIncreaseFactor; //account for different angles effects on voxel cube's projected area
double invMag = 1 / Math.Sqrt(x * x + y * y + z * z);
sectionThickness *= z * invMag;
double xNorm, yNorm, zNorm;
xNorm = plane.x * invMag;
yNorm = plane.y * invMag;
zNorm = plane.z * invMag;
double zAbsNorm = Math.Abs(zNorm);
double i_xx = 0, i_xy = 0, i_yy = 0;
int xSectArrayLength = (int)(xCellLength * zAbsNorm + zCellLength * Math.Abs(xNorm) + 1);
//Stack allocation of array allows removal of garbage collection issues
//bool* sectionArray = stackalloc bool[xSectArrayLength * (int)(yCellLength * zAbsNorm + zCellLength * Math.Abs(yNorm) + 1)];
//bool[,] sectionRepresentation = new bool[(int)Math.Ceiling(xCellLength * Math.Abs(zNorm) + zCellLength * Math.Abs(xNorm)), (int)Math.Ceiling(yCellLength * Math.Abs(zNorm) + zCellLength * Math.Abs(yNorm))];
double invZPlane = 1 / plane.z;
plane.y *= invZPlane;
plane.x *= invZPlane;
plane.w *= invZPlane;
wInc *= invZPlane;
for (int m = 0; m < sectionCount; m++)
{
double areaCount = 0;
//Vector3d centroid = Vector3d.zero;
double centx, centy, centz;
centx = centy = centz = 0;
//int unshadowedAreaCount = 0;
//Vector3d unshadowedCentroid = Vector3d.zero;
//int unshadowedCentx, unshadowedCenty, unshadowedCentz;
//unshadowedCentx = unshadowedCenty = unshadowedCentz = 0;
Dictionary<Part, VoxelCrossSection.SideAreaValues> partSideAreas = crossSections[m].partSideAreaValues;
partSideAreas.Clear();
for (int iOverall = 0; iOverall < xCellLength; iOverall += 8) //Overall ones iterate over the actual voxel indices (to make use of the equation of the plane) but are used to get chunk indices
for (int jOverall = 0; jOverall < yCellLength; jOverall += 8)
{
int kSect1, kSect2, kSect3;
if (plane.x * plane.y > 0) //Determine high and low points on this quad of the plane
{
kSect1 = (int)(-(plane.x * iOverall + plane.y * jOverall + plane.w) + 0.5);
kSect3 = (int)(-(plane.x * (iOverall + 7) + plane.y * (jOverall + 7) + plane.w) + 0.5);
}
else
{
kSect1 = (int)(-(plane.x * (iOverall + 7) + plane.y * jOverall + plane.w) + 0.5);
kSect3 = (int)(-(plane.x * iOverall + plane.y * (jOverall + 7) + plane.w) + 0.5);
}
kSect2 = (int)((kSect1 + kSect3) * 0.5);
int kMin = Math.Min(kSect1, kSect3);
int kMax = Math.Max(kSect1, kSect3) + 1;
kSect1 = kMin >> 3;
kSect2 = kSect2 >> 3;
kSect3 = (kMax - 1) >> 3;
if (kSect1 >= zLength) //if the smallest sect is above the limit, they all are
continue;
if (kSect3 < 0) //if the largest sect is below the limit, they all are
continue;
if (kSect1 == kSect3) //If chunk indices are identical, only get that one and it's very simple
{
if (kSect1 < 0)
continue;
VoxelChunk sect = voxelChunks[iOverall >> 3, jOverall >> 3, kSect1];
if (sect == null)
continue;
for (int i = iOverall; i < iOverall + 8; i++) //Finally, iterate over the chunk
{
double tmp = plane.x * i + plane.w;
for (int j = jOverall; j < jOverall + 8; j++)
{
int k = (int)(-(plane.y * j + tmp) + 0.5);
if (k < kMin || k > kMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair = sect.GetVoxelPartSizePairGlobalIndex(index);
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
else
{
VoxelChunk sect1 = null, sect2 = null, sect3 = null;
int iSect = iOverall >> 3;
int jSect = jOverall >> 3;
bool validSects = false;
if (!(kSect1 < 0)) //If indices are different, this section of the plane crosses two chunks
{
sect1 = voxelChunks[iSect, jSect, kSect1];
if (sect1 != null)
validSects = true;
}
if (!(kSect2 < 0 || kSect2 >= zLength))
{
sect2 = voxelChunks[iSect, jSect, kSect2];
if (sect2 != null && sect2 != sect1)
validSects |= true;
}
if (!(kSect3 >= zLength))
{
sect3 = voxelChunks[iSect, jSect, kSect3];
if (sect3 != null && (sect3 != sect2 && sect3 != sect1))
validSects |= true;
}
if (!validSects)
continue;
for (int i = iOverall; i < iOverall + 8; i++)
{
double tmp = plane.x * i + plane.w;
for (int j = jOverall; j < jOverall + 8; j++)
{
int k = (int)(-(plane.y * j + tmp) + 0.5);
if (k < kMin || k > kMax)
continue;
int index = i + 8 * j + 64 * k;
VoxelChunk.PartSizePair pair;
int kSect = k >> 3;
if (kSect == kSect1 && sect1 != null)
pair = sect1.GetVoxelPartSizePairGlobalIndex(index);
else if (kSect == kSect2 && sect2 != null)
pair = sect2.GetVoxelPartSizePairGlobalIndex(index);
else if (kSect == kSect3 && sect3 != null)
pair = sect3.GetVoxelPartSizePairGlobalIndex(index);
else
continue;
if ((object)pair.part != null)
{
DetermineIfPartGetsForcesAndAreas(partSideAreas, pair, i, j, k);
double size = pair.GetSize();
if (size > 1.0)
size = 1.0;
areaCount += size;
centx += i * size;
centy += j * size;
centz += k * size;
Vector3 location = vesselToSectionNormal.MultiplyVector(new Vector3(i, j, k));
i_xx += location.x * location.x * size;
i_xy += location.x * location.y * size;
i_yy += location.y * location.y * size;
}
}
}
}
}
Vector3d centroid = new Vector3d(centx, centy, centz);
//Vector3d unshadowedCentroid = new Vector3d(unshadowedCentx, unshadowedCenty, unshadowedCentz);
if (areaCount > 0)
{
if (frontIndexFound)
backIndex = m;
else
{
frontIndexFound = true;
frontIndex = m;
}
centroid /= areaCount;
/*if (unshadowedAreaCount != 0)
unshadowedCentroid /= unshadowedAreaCount;
else
unshadowedCentroid = centroid;*/
}
Vector3 localCentroid = vesselToSectionNormal.MultiplyVector(centroid);
i_xx -= areaCount * localCentroid.x * localCentroid.x;
i_xy -= areaCount * localCentroid.x * localCentroid.y;
i_yy -= areaCount * localCentroid.y * localCentroid.y;
double tanPrinAngle = TanPrincipalAxisAngle(i_xx, i_yy, i_xy);
Vector3 axis1 = new Vector3(1, 0, 0), axis2 = new Vector3(0, 0, 1);
double flatnessRatio = 1;
if (tanPrinAngle != 0)
{
axis1 = new Vector3(1, 0, (float)tanPrinAngle);
axis1.Normalize();
axis2 = new Vector3(axis1.z, 0, -axis1.x);
flatnessRatio = i_xy * axis2.z / axis2.x + i_xx;
flatnessRatio = (i_xy * tanPrinAngle + i_xx) / flatnessRatio;
flatnessRatio = Math.Sqrt(Math.Sqrt(flatnessRatio));
}
if (double.IsNaN(flatnessRatio))
flatnessRatio = 1;
Vector3 principalAxis;
if (flatnessRatio > 1)
principalAxis = axis1;
else
{
flatnessRatio = 1 / flatnessRatio;
principalAxis = axis2;
}
if (flatnessRatio > 10)
flatnessRatio = 10;
principalAxis = sectionNormalToVesselCoords.MultiplyVector(principalAxis);
crossSections[m].centroid = centroid * elementSize + lowerRightCorner;
//crossSections[m].additonalUnshadowedCentroid = unshadowedCentroid * elementSize + lowerRightCorner;
crossSections[m].area = areaCount * elementArea;
crossSections[m].flatnessRatio = flatnessRatio;
crossSections[m].flatNormalVector = principalAxis;
//crossSections[m].additionalUnshadowedArea = unshadowedAreaCount * elementArea;
plane.w += wInc;
}
}
double denom = 1 / (sectionThickness * sectionThickness);
maxCrossSectionArea = 0;
for (int i = frontIndex; i <= backIndex; i++) //calculate 2nd derivs, raw
{
double areaM1, area0, areaP1;
if(i == frontIndex) //forward difference for frontIndex
{
areaM1 = crossSections[i].area;
area0 = crossSections[i + 1].area;
areaP1 = crossSections[i + 2].area;
}
else if (i == backIndex) //backward difference for backIndex
{
areaM1 = crossSections[i - 2].area;
area0 = crossSections[i - 1].area;
areaP1 = crossSections[i].area;
}
else //central difference for all others
{
areaM1 = crossSections[i - 1].area;
area0 = crossSections[i].area;
areaP1 = crossSections[i + 1].area;
}
double areaSecondDeriv = (areaM1 + areaP1) - 2 * area0;
areaSecondDeriv *= denom;
crossSections[i].secondAreaDeriv = areaSecondDeriv;
if (crossSections[i].area > maxCrossSectionArea)
maxCrossSectionArea = crossSections[i].area;
}
}
