public void SelectElementASTGeneration()
{
ReferencePoint refPoint;
using (var trans = new Transaction(DocumentManager.Instance.CurrentDBDocument, "CreateAndDeleteAreReferencePoint"))
{
trans.Start();
FailureHandlingOptions fails = trans.GetFailureHandlingOptions();
fails.SetClearAfterRollback(true);
trans.SetFailureHandlingOptions(fails);
refPoint = DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewReferencePoint(new XYZ());
trans.Commit();
}
var sel = new DSModelElementSelection { SelectedElement = refPoint.Id };
var buildOutput = sel.BuildOutputAst(new List<AssociativeNode>());
//function call node builds this
/*return new IdentifierListNode
{
LeftNode = new IdentifierNode(className),
RightNode = AstFactory.BuildFunctionCall(functionName, arguments)
};*/
var funCall = (FunctionCallNode)(((IdentifierListNode)((BinaryExpressionNode)buildOutput.First()).RightNode)).RightNode;
Assert.IsInstanceOf<IdentifierNode>(funCall.Function);
Assert.AreEqual(1, funCall.FormalArguments.Count);
Assert.IsInstanceOf<IntNode>(funCall.FormalArguments[0]);
Assert.AreEqual(refPoint.Id.IntegerValue, ((IntNode)funCall.FormalArguments[0]).Value);
}
public void SelectElementsASTGeneration()
{
var refPoints = new List<ReferencePoint>();
using (var trans = new Transaction(DocumentManager.Instance.CurrentDBDocument, "Create some ReferencePoints"))
{
trans.Start();
FailureHandlingOptions fails = trans.GetFailureHandlingOptions();
fails.SetClearAfterRollback(true);
trans.SetFailureHandlingOptions(fails);
refPoints.Add(DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewReferencePoint(new XYZ(0,0,0)));
refPoints.Add(DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewReferencePoint(new XYZ(0,0,1)));
refPoints.Add(DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewReferencePoint(new XYZ(0,0,2)));
trans.Commit();
}
var sel = new DSModelElementsSelection { SelectedElement = refPoints.Cast<Element>().Select(x => x.UniqueId).ToList() };
var buildOutput = sel.BuildOutputAst(new List<AssociativeNode>());
var funCall = (ExprListNode)((BinaryExpressionNode)buildOutput.First()).RightNode;
Assert.AreEqual(funCall.list.Count, 3);
Assert.Inconclusive("Need more robust testing here.");
}
public void CurveByPoints()
{
var model = dynSettings.Controller.DynamoModel;
string samplePath = Path.Combine(_testPath, @".\Curve\CurveByPoints.dyn");
string testPath = Path.GetFullPath(samplePath);
Controller.DynamoViewModel.OpenCommand.Execute(testPath);
Assert.DoesNotThrow(() => dynSettings.Controller.RunExpression());
//cerate some points and wire them
//to the selections
ReferencePoint p1, p2, p3, p4;
using (_trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document))
{
_trans.Start("Create reference points for testing.");
p1 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(1, 5, 12));
p2 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 1, 12));
p3 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(12, 1, 5));
p4 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 12, 1));
_trans.Commit();
}
var ptSelectNodes = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is DSModelElementSelection);
if (!ptSelectNodes.Any())
Assert.Fail("Could not find point selection nodes in dynamo graph.");
((DSModelElementSelection)ptSelectNodes.ElementAt(0)).SelectedElement = p1.Id;
((DSModelElementSelection)ptSelectNodes.ElementAt(1)).SelectedElement = p2.Id;
((DSModelElementSelection)ptSelectNodes.ElementAt(2)).SelectedElement = p3.Id;
((DSModelElementSelection)ptSelectNodes.ElementAt(3)).SelectedElement = p4.Id;
dynSettings.Controller.RunExpression(true);
FilteredElementCollector fec = new FilteredElementCollector(DocumentManager.Instance.CurrentUIDocument.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsTrue(mc.IsReferenceLine);
//now flip the switch for creating a reference curve
var boolNode = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is DSCoreNodesUI.BoolSelector).First();
((DSCoreNodesUI.BasicInteractive<bool>)boolNode).Value = false;
dynSettings.Controller.RunExpression(true);
Assert.AreEqual(fec.ToElements().Count(), 1);
mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsFalse(mc.IsReferenceLine);
}
/// <summary>
/// This function gets all the walls in the current Revit document
/// </summary>
/// <param name="startNewTransaction">whether do the filtering in a new transaction</param>
/// <returns>the walls</returns>
private static IList<Element> GetAllWallElements(bool startNewTransaction)
{
if (startNewTransaction)
{
using (var trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document, "FilteringElements"))
{
trans.Start();
ElementClassFilter ef = new ElementClassFilter(typeof(Wall));
FilteredElementCollector fec = new FilteredElementCollector(DocumentManager.Instance.CurrentUIDocument.Document);
fec.WherePasses(ef);
trans.Commit();
return fec.ToElements();
}
}
else
{
ElementClassFilter ef = new ElementClassFilter(typeof(Wall));
FilteredElementCollector fec = new FilteredElementCollector(DocumentManager.Instance.CurrentUIDocument.Document);
fec.WherePasses(ef);
return fec.ToElements();
}
}
public void SelectReferenceASTGeneration()
{
Form extrude;
using (var trans = new Transaction(DocumentManager.Instance.CurrentDBDocument, "Create an extrusion Form"))
{
trans.Start();
FailureHandlingOptions fails = trans.GetFailureHandlingOptions();
fails.SetClearAfterRollback(true);
trans.SetFailureHandlingOptions(fails);
var p = new Plane(new XYZ(0, 0, 1), new XYZ());
var arc = Arc.Create(p, 2, 0, System.Math.PI);
var sp = SketchPlane.Create(DocumentManager.Instance.CurrentDBDocument, p);
var mc = DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewModelCurve(arc, sp);
var profiles = new ReferenceArray();
profiles.Append(mc.GeometryCurve.Reference);
extrude = DocumentManager.Instance.CurrentDBDocument.FamilyCreate.NewExtrusionForm(false, profiles, new XYZ(0,0,1));
trans.Commit();
}
var geom = extrude.get_Geometry(new Options()
{
ComputeReferences = true,
DetailLevel = ViewDetailLevel.Medium,
IncludeNonVisibleObjects = true
});
var solid = geom.FirstOrDefault(x => x is Solid) as Solid;
var face = solid.Faces.get_Item(0);
Assert.Greater(solid.Faces.Size, 0);
var sel = new DSFaceSelection() { SelectedElement = face.Reference };
var buildOutput = sel.BuildOutputAst(new List<AssociativeNode>());
var funCall = (FunctionCallNode)((IdentifierListNode)((BinaryExpressionNode)buildOutput.First()).RightNode).RightNode;
Assert.IsInstanceOf<IdentifierNode>(funCall.Function);
Assert.AreEqual(1, funCall.FormalArguments.Count);
Assert.IsInstanceOf<StringNode>(funCall.FormalArguments[0]);
var stableRef = face.Reference.ConvertToStableRepresentation(DocumentManager.Instance.CurrentDBDocument);
Assert.AreEqual(stableRef, ((StringNode)funCall.FormalArguments[0]).value);
}
public void CreateInRevitSelectInDynamoSelectDifferentElement()
{
//This is to test that when a node is binding with a new element, the information related to binding
//has actually changed.
//Create two reference points in Revit
string rpID1, rpID2;
ReferencePoint rp1, rp2;
using (var trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document, "CreateInRevit"))
{
trans.Start();
rp1 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ());
rpID1 = rp1.UniqueId;
rp2 = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ(10, 0, 0));
rpID2 = rp2.UniqueId;
trans.Commit();
}
//Select the first reference point in Dynamo
string dynFilePath = Path.Combine(workingDirectory, @".\ElementBinding\SelectInDynamo.dyn");
string testPath = Path.GetFullPath(dynFilePath);
ViewModel.OpenCommand.Execute(testPath);
var model = ViewModel.Model;
var selNodes = model.AllNodes.Where(x => x is ElementSelection<Autodesk.Revit.DB.Element>);
var selNode = selNodes.First() as ElementSelection<Autodesk.Revit.DB.Element>;
IEnumerable<Element> selection1 = new[] { rp1 };
selNode.UpdateSelection(selection1);
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
var id1 = selNode.SelectionResults.First();
//Select the second reference point in Dynamo
IEnumerable<Element> selection2 = new[] { rp2 };
selNode.UpdateSelection(selection2);
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
var id2 = selNode.SelectionResults.First();
//Ensure the element binding is not the same
Assert.IsTrue(!id1.Equals(id2));
}
public void CreateInDynamoModifyInRevit()
{
//Create a wall in Dynamo
string dynFilePath = Path.Combine(workingDirectory, @".\ElementBinding\CreateWallInDynamo.dyn");
string testPath = Path.GetFullPath(dynFilePath);
ViewModel.OpenCommand.Execute(testPath);
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
//Modify the wall in Revit
using (var trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document, "DeleteInRevit"))
{
trans.Start();
IList<Element> rps = GetAllWallElements(false);
Assert.AreEqual(1, rps.Count);
Wall wall = rps.First() as Wall;
//Modify the wall to cause a failure
Assert.Inconclusive("TO DO");
wall.Flip();
DocumentManager.Instance.CurrentDBDocument.Delete(wall);
trans.Commit();
}
}
public void CreateInRevitSelectInDynamoUndoInRevit()
{
//Create a reference point in Revit
string rpID;
ReferencePoint rp;
using (var trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document, "CreateInRevit"))
{
trans.Start();
rp = DocumentManager.Instance.CurrentUIDocument.Document.FamilyCreate.NewReferencePoint(new XYZ());
rpID = rp.UniqueId;
trans.Commit();
}
//Select the reference point in Dynamo
string dynFilePath = Path.Combine(workingDirectory, @".\ElementBinding\SelectInDynamo.dyn");
string testPath = Path.GetFullPath(dynFilePath);
ViewModel.OpenCommand.Execute(testPath);
var model = ViewModel.Model;
var selNodes = model.AllNodes.Where(x => x is ElementSelection<Autodesk.Revit.DB.Element>);
var selNode = selNodes.First() as ElementSelection<Autodesk.Revit.DB.Element>;
//selNode.SelectionResults.Add(rp);
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
//Undo the creation of a reference point in Revit
Assert.Inconclusive("TO DO");
}
public void CreateInDynamoDeleteInRevit()
{
//This test case is to test that elements can be created via Dynamo.
//After they are deleted in Revit, we can still create them via Dynamo.
//Create a reference point in Dynamo
string dynFilePath = Path.Combine(workingDirectory, @".\ElementBinding\CreateInDynamo.dyn");
string testPath = Path.GetFullPath(dynFilePath);
ViewModel.OpenCommand.Execute(testPath);
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
var model = ViewModel.Model;
var selNodes = model.AllNodes.Where(x => string.Equals(x.GUID.ToString(), "6a79717b-7438-458a-a725-587be0ba84fd"));
Assert.IsTrue(selNodes.Any());
var node = selNodes.First();
var id1 = GetBindingElementIdForNode(node.GUID);
//Delete all reference points in Revit
using (var trans = new Transaction(DocumentManager.Instance.CurrentUIDocument.Document, "DeleteInRevit"))
{
trans.Start();
IList<Element> rps = GetAllReferencePointElements(false);
var rpIDs = rps.Select(x => x.Id);
DocumentManager.Instance.CurrentDBDocument.Delete(rpIDs.ToList());
trans.Commit();
}
//Run the graph again
Assert.DoesNotThrow(() =>ViewModel.Model.RunExpression());
var id2 = GetBindingElementIdForNode(node.GUID);
//Check the number of reference points
//This also verifies MAGN-2317
IList<Element> newRps = GetAllReferencePointElements(true);
Assert.AreEqual(1, newRps.Count());
//Ensure the binding elements are different
Assert.IsTrue(!id1.Equals(id2));
}
public void XYZFromReferencePointNode()
{
DynamoViewModel vm = dynSettings.Controller.DynamoViewModel;
string samplePath = Path.Combine(_testPath, @".\XYZFromReferencePoint.dyn");
string testPath = Path.GetFullPath(samplePath);
dynSettings.Controller.RunCommand(vm.OpenCommand, testPath);
//dynSettings.Controller.RunCommand(vm.RunExpressionCommand, true);
ReferencePoint rp;
using(_trans = new Transaction(dynRevitSettings.Doc.Document))
{
_trans.Start("Create a reference point.");
rp = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ());
_trans.Commit();
}
FSharpList<Value> args = FSharpList<Value>.Empty;
args = FSharpList<Value>.Cons(Value.NewContainer(rp), args);
//find the XYZFromReferencePoint node
var node = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is dynXYZFromReferencePoint).First();
Value v = ((dynNodeWithOneOutput)node).Evaluate(args);
Assert.IsInstanceOf(typeof(XYZ), ((Value.Container)v).Item);
}
public void CurveByPointsNode()
{
DynamoViewModel vm = dynSettings.Controller.DynamoViewModel;
string samplePath = Path.Combine(_testPath, @".\CurveByPoints.dyn");
string testPath = Path.GetFullPath(samplePath);
dynSettings.Controller.RunCommand(vm.OpenCommand, testPath);
//cerate some points and wire them
//to the selections
ReferencePoint p1, p2, p3, p4;
using(_trans = new Transaction(dynRevitSettings.Doc.Document))
{
_trans.Start("Create reference points for testing.");
p1 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(1, 5, 12));
p2 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 1, 12));
p3 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(12, 1, 5));
p4 = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ(5, 12, 1));
_trans.Commit();
}
var ptSelectNodes = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is dynPointBySelection);
if (!ptSelectNodes.Any())
Assert.Fail("Could not find point selection nodes in dynamo graph.");
((dynPointBySelection)ptSelectNodes.ElementAt(0)).SelectedElement = p1;
((dynPointBySelection)ptSelectNodes.ElementAt(1)).SelectedElement = p2;
((dynPointBySelection)ptSelectNodes.ElementAt(2)).SelectedElement = p3;
((dynPointBySelection)ptSelectNodes.ElementAt(3)).SelectedElement = p4;
dynSettings.Controller.RunCommand(vm.RunExpressionCommand, true);
FilteredElementCollector fec = new FilteredElementCollector(dynRevitSettings.Doc.Document);
fec.OfClass(typeof(CurveElement));
Assert.AreEqual(fec.ToElements().Count(), 1);
CurveByPoints mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsTrue(mc.IsReferenceLine);
//now flip the switch for creating a reference curve
var boolNode = dynSettings.Controller.DynamoModel.Nodes.Where(x => x is dynBoolSelector).First();
((dynBasicInteractive<bool>)boolNode).Value = false;
dynSettings.Controller.RunCommand(vm.RunExpressionCommand, true);
Assert.AreEqual(fec.ToElements().Count(), 1);
mc = (CurveByPoints)fec.ToElements().ElementAt(0);
Assert.IsFalse(mc.IsReferenceLine);
}
public void CanCreateAndDeleteAReferencePoint()
{
using (_trans = _trans = new Transaction(dynRevitSettings.Doc.Document, "CreateAndDeleteAreReferencePoint"))
{
_trans.Start();
FailureHandlingOptions fails = _trans.GetFailureHandlingOptions();
fails.SetClearAfterRollback(true);
_trans.SetFailureHandlingOptions(fails);
ReferencePoint rp = dynRevitSettings.Doc.Document.FamilyCreate.NewReferencePoint(new XYZ());
//make a filter for reference points.
ElementClassFilter ef = new ElementClassFilter(typeof(ReferencePoint));
FilteredElementCollector fec = new FilteredElementCollector(dynRevitSettings.Doc.Document);
fec.WherePasses(ef);
Assert.AreEqual(1, fec.ToElements().Count());
dynRevitSettings.Doc.Document.Delete(rp);
_trans.Commit();
}
}
/// <summary>
/// Creates two model curves separated in Z.
/// </summary>
/// <param name="mc1"></param>
/// <param name="mc2"></param>
private void CreateTwoModelCurves(out ModelCurve mc1, out ModelCurve mc2)
{
//create two model curves
using (_trans = _trans = new Transaction(dynRevitSettings.Doc.Document, "CreateTwoModelCurves"))
{
_trans.Start();
Plane p1 = new Plane(XYZ.BasisZ, XYZ.Zero);
Plane p2 = new Plane(XYZ.BasisZ, new XYZ(0, 0, 5));
SketchPlane sp1 = dynRevitSettings.Doc.Document.FamilyCreate.NewSketchPlane(p1);
SketchPlane sp2 = dynRevitSettings.Doc.Document.FamilyCreate.NewSketchPlane(p2);
Curve c1 = dynRevitSettings.Revit.Application.Create.NewLineBound(XYZ.Zero, new XYZ(1, 0, 0));
Curve c2 = dynRevitSettings.Revit.Application.Create.NewLineBound(new XYZ(0, 0, 5), new XYZ(1, 0, 5));
mc1 = dynRevitSettings.Doc.Document.FamilyCreate.NewModelCurve(c1, sp1);
mc2 = dynRevitSettings.Doc.Document.FamilyCreate.NewModelCurve(c2, sp2);
_trans.Commit();
}
}