public void SwitchingToCustomWorkspaceWithSelectionShouldNotAllowGeometricOperations()
{
var model = ViewModel.Model; // The current DynamoModel instance.
// Step 0: Create a new node in Home workspace.
var addNode = new DSFunction(model.LibraryServices.GetFunctionDescriptor("+"));
model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(model.CurrentWorkspace.Nodes.Count(), 1);
// Step 1: Select the newly node, geometry operation should be enabled.
DynamoSelection.Instance.Selection.Add(addNode);
Assert.AreEqual(true, ViewModel.CurrentSpaceViewModel.HasSelection);
Assert.AreEqual(true, ViewModel.CurrentSpaceViewModel.IsGeometryOperationEnabled);
// Step 2: Open a Custom workspace.
var customNodePath = Path.Combine(TestDirectory, @"core\CustomNodes\NoInput.dyf");
ViewModel.OpenCommand.Execute(customNodePath);
var customWorkspace = model.Workspaces.FirstOrDefault(x => x is CustomNodeWorkspaceModel);
Assert.IsNotNull(customWorkspace);
// Step 3: Switch over from home workspace to custom workspace.
Assert.IsTrue(ViewModel.CurrentSpaceViewModel.Model is HomeWorkspaceModel);
ViewModel.CurrentWorkspaceIndex = 1;
Assert.IsTrue(ViewModel.CurrentSpaceViewModel.Model is CustomNodeWorkspaceModel);
// Step 4: Verify that the geometry operations are
// disabled despite the fact that there is still selection.
Assert.AreEqual(true, ViewModel.CurrentSpaceViewModel.HasSelection);
Assert.AreEqual(false, ViewModel.CurrentSpaceViewModel.IsGeometryOperationEnabled);
}
public void CanAddToSelectionCommand()
{
int numNodes = 100;
// create 100 nodes, and select them as you go
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.AddToSelection(addNode);
Assert.AreEqual(i + 1, DynamoSelection.Instance.Selection.Count);
}
}
private List<NodeModel> SetupNumberNodesAndPresets()
{
var model = CurrentDynamoModel;
//create some numbers
var numberNode1 = new DoubleInput();
numberNode1.Value = "1";
var numberNode2 = new DoubleInput();
numberNode2.Value = "2";
var addNode = new DSFunction(model.LibraryServices.GetFunctionDescriptor("+"));
model.ExecuteCommand(new DynamoModel.CreateNodeCommand(numberNode1,0,0,true,false));
model.ExecuteCommand(new DynamoModel.CreateNodeCommand(numberNode2, 0, 0, true, false));
model.ExecuteCommand(new DynamoModel.CreateNodeCommand(addNode, 0, 0, true, false));
//connect them up
model.ExecuteCommand(new DynamoModel.MakeConnectionCommand(numberNode1.GUID,0,PortType.Output,DynCmd.MakeConnectionCommand.Mode.Begin));
model.ExecuteCommand(new DynamoModel.MakeConnectionCommand(addNode.GUID,0,PortType.Input,DynCmd.MakeConnectionCommand.Mode.End));
model.ExecuteCommand(new DynamoModel.MakeConnectionCommand(numberNode2.GUID,0,PortType.Output,DynCmd.MakeConnectionCommand.Mode.Begin));
model.ExecuteCommand(new DynamoModel.MakeConnectionCommand(addNode.GUID,1,PortType.Input,DynCmd.MakeConnectionCommand.Mode.End));
Assert.AreEqual(model.CurrentWorkspace.Nodes.Count(), 3);
Assert.AreEqual(model.CurrentWorkspace.Connectors.Count(), 2);
DynamoSelection.Instance.ClearSelection();
//create the first state with the numbers selected
DynamoSelection.Instance.Selection.Add(numberNode1);
DynamoSelection.Instance.Selection.Add(numberNode2);
var ids = DynamoSelection.Instance.Selection.OfType<NodeModel>().Select(x => x.GUID).ToList();
//create the preset from 2 nodes
model.ExecuteCommand(new DynamoModel.AddPresetCommand("state1", "3", ids));
//change values
numberNode1.Value = "2";
numberNode2.Value = "3";
DynamoSelection.Instance.ClearSelection();
DynamoSelection.Instance.Selection.Add(numberNode1);
DynamoSelection.Instance.Selection.Add(numberNode2);
ids = DynamoSelection.Instance.Selection.OfType<NodeModel>().Select(x => x.GUID).ToList();
model.ExecuteCommand(new DynamoModel.AddPresetCommand("state2", "5", ids));
return new List<NodeModel>() { numberNode1, numberNode2,addNode };
}
public void TooglePresetVisibilityWithUndoRedo()
{
//Create a Node
var addNode = new DSFunction(ViewModel.Model.LibraryServices.GetFunctionDescriptor("+"));
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
//verify the node was created
Assert.AreEqual(1, ViewModel.Model.CurrentWorkspace.Nodes.Count());
//Check the Preset option visibility.
Assert.AreEqual(false, ViewModel.EnablePresetOptions);
DynamoSelection.Instance.Selection.Add(addNode);
var ids = DynamoSelection.Instance.Selection.OfType<NodeModel>().Select(x => x.GUID).ToList();
//create the preset from 2 nodes
ViewModel.Model.ExecuteCommand(new DynamoModel.AddPresetCommand("state1", "a state with 2 numbers", ids));
//assert that the preset has been created
Assert.AreEqual(ViewModel.Model.CurrentWorkspace.Presets.Count(), 1);
Assert.AreEqual(ViewModel.Model.CurrentWorkspace.Presets.First().Nodes.Count(), 1);
//Check the Preset option visibility.
Assert.AreEqual(true, ViewModel.EnablePresetOptions);
//undo the preset creation
ViewModel.CurrentSpace.UndoRecorder.Undo();
Assert.AreEqual(ViewModel.Model.CurrentWorkspace.Presets.Count(), 0);
//Check the Preset option visibility.
Assert.AreEqual(false, ViewModel.EnablePresetOptions);
//redo the preset creation
ViewModel.CurrentSpace.UndoRecorder.Redo();
Assert.AreEqual(ViewModel.Model.CurrentWorkspace.Presets.Count(), 1);
//Check the Preset option visibility.
Assert.AreEqual(true, ViewModel.EnablePresetOptions);
}
public void CanSumTwoNumbers()
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(new CodeBlockNodeModel("2", 100.0, 100.0, CurrentDynamoModel.LibraryServices, CurrentDynamoModel.CurrentWorkspace.ElementResolver), false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(new CodeBlockNodeModel("2", 100.0, 100.0, CurrentDynamoModel.LibraryServices, CurrentDynamoModel.CurrentWorkspace.ElementResolver), false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(new Watch { X = 100, Y = 300 }, false);
ConnectorModel.Make(CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(1), CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(0), 0, 0);
ConnectorModel.Make(CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(2), CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(0), 0, 1);
ConnectorModel.Make(CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(0), CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3), 0, 0);
BeginRun();
Thread.Sleep(250);
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3) is Watch, true);
var w = (Watch)CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3);
Assert.AreEqual(4.0, w.CachedValue);
}
public void CannotSavePopulatedWorkspaceIfSaveIsCalledWithoutSettingPath()
{
int numNodes = 100;
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
CurrentDynamoModel.CurrentWorkspace.Save(CurrentDynamoModel.EngineController.LiveRunnerRuntimeCore);
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.FileName, string.Empty);
}
public void CanSaveAsFileWithNodesInIt()
{
int numNodes = 100;
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
string fn = "ruthlessTurtles.dyn";
string path = Path.Combine(TempFolder, fn);
CurrentDynamoModel.CurrentWorkspace.SaveAs(
path,
CurrentDynamoModel.EngineController.LiveRunnerRuntimeCore);
var tempFldrInfo = new DirectoryInfo(TempFolder);
Assert.AreEqual(1, tempFldrInfo.GetFiles().Length);
Assert.AreEqual(fn, tempFldrInfo.GetFiles()[0].Name);
}
public void CanAddANodeByName()
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.Nodes.Count(), 1);
}
public void TestDraggedNode()
{
var addNode = new DSFunction(ViewModel.Model.LibraryServices.GetFunctionDescriptor("+")) { X = 16, Y = 32 };
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
NodeModel locatable = ViewModel.Model.CurrentWorkspace.Nodes.First();
var startPoint = new Point2D(8, 64);
var dn = new WorkspaceViewModel.DraggedNode(locatable, startPoint);
// Initial node position.
Assert.AreEqual(16, locatable.X);
Assert.AreEqual(32, locatable.Y);
// Move the mouse cursor to move node.
dn.Update(new Point2D(-16, 72));
Assert.AreEqual(-8, locatable.X);
Assert.AreEqual(40, locatable.Y);
}
internal MousePointManipulator(DSFunction node, DynamoManipulationExtension manipulatorContext)
: base(node, manipulatorContext)
{
}
internal PointOnCurveManipulator(DSFunction node, DynamoManipulationExtension manipulatorContext)
: base(node, manipulatorContext)
{
}
public void AddPresetShouldSetDirtyFlag()
{
var model = CurrentDynamoModel;
//create some numbers
var numberNode1 = new DoubleInput();
numberNode1.Value = "1";
var numberNode2 = new DoubleInput();
numberNode2.Value = "2";
var addNode = new DSFunction(model.LibraryServices.GetFunctionDescriptor("+"));
//Check for Dirty flag
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges,false);
//add the nodes
model.CurrentWorkspace.AddAndRegisterNode(numberNode1, false);
model.CurrentWorkspace.AddAndRegisterNode(numberNode2, false);
model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
//Check for Dirty flag
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges, true);
//Set the dirty flag to false. Mocking the save.
model.CurrentWorkspace.HasUnsavedChanges = false;
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges, false);
//connect them up
ConnectorModel.Make(numberNode1, addNode, 0, 0);
ConnectorModel.Make(numberNode2, addNode, 0, 1);
//Check for Dirty flag - After the connection the dirty flag should be set.
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges, true);
//Set the dirty flag to false. Mocking the save.
model.CurrentWorkspace.HasUnsavedChanges = false;
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges, false);
Assert.AreEqual(model.CurrentWorkspace.Nodes.Count(), 3);
Assert.AreEqual(model.CurrentWorkspace.Connectors.Count(), 2);
//create the first state with the numbers selected
DynamoSelection.Instance.Selection.Add(numberNode1);
DynamoSelection.Instance.Selection.Add(numberNode2);
var ids = DynamoSelection.Instance.Selection.OfType<NodeModel>().Select(x => x.GUID).ToList();
//create the preset from 2 nodes
model.CurrentWorkspace.AddPreset(
"state1",
"3", ids);
Assert.AreEqual(1, model.CurrentWorkspace.Presets.Count());
//change values
numberNode1.Value = "2";
numberNode2.Value = "3";
DynamoSelection.Instance.ClearSelection();
DynamoSelection.Instance.Selection.Add(numberNode1);
DynamoSelection.Instance.Selection.Add(numberNode2);
ids = DynamoSelection.Instance.Selection.OfType<NodeModel>().Select(x => x.GUID).ToList();
model.CurrentWorkspace.AddPreset(
"state2",
"5", ids);
//Check for Dirty flag - After the Preset the dirty flag should be set.
Assert.AreEqual(model.CurrentWorkspace.HasUnsavedChanges, true);
}
public override object ReadJson(JsonReader reader, Type objectType, object existingValue, JsonSerializer serializer)
{
NodeModel node = null;
var obj = JObject.Load(reader);
var type = Type.GetType(obj["$type"].Value<string>());
var guid = Guid.Parse(obj["Uuid"].Value<string>());
var displayName = obj["DisplayName"].Value<string>();
//var x = obj["X"].Value<double>();
//var y = obj["Y"].Value<double>();
var inPorts = obj["InputPorts"].ToArray().Select(t => t.ToObject<PortModel>()).ToArray();
var outPorts = obj["OutputPorts"].ToArray().Select(t => t.ToObject<PortModel>()).ToArray();
var resolver = (IdReferenceResolver)serializer.ReferenceResolver;
if (type == typeof(Function))
{
var functionId = Guid.Parse(obj["FunctionUuid"].Value<string>());
node = manager.CreateCustomNodeInstance(functionId);
RemapPorts(node, inPorts, outPorts, resolver);
}
else if(type == typeof(CodeBlockNodeModel))
{
var code = obj["Code"].Value<string>();
node = new CodeBlockNodeModel(code, guid, 0.0, 0.0, libraryServices, ElementResolver);
RemapPorts(node, inPorts, outPorts, resolver);
}
else if(typeof(DSFunctionBase).IsAssignableFrom(type))
{
var mangledName = obj["FunctionName"].Value<string>();
var description = libraryServices.GetFunctionDescriptor(mangledName);
if(type == typeof(DSVarArgFunction))
{
node = new DSVarArgFunction(description);
// The node syncs with the function definition.
// Then we need to make the inport count correct
var varg = (DSVarArgFunction)node;
varg.VarInputController.SetNumInputs(inPorts.Count());
}
else if(type == typeof(DSFunction))
{
node = new DSFunction(description);
}
RemapPorts(node, inPorts, outPorts, resolver);
}
else if (type == typeof(DSVarArgFunction))
{
var functionId = Guid.Parse(obj["FunctionUuid"].Value<string>());
node = manager.CreateCustomNodeInstance(functionId);
RemapPorts(node, inPorts, outPorts, resolver);
}
else
{
node = (NodeModel)obj.ToObject(type);
}
node.GUID = guid;
node.NickName = displayName;
//node.X = x;
//node.Y = y;
// Add references to the node and the ports to the reference resolver,
// so that they are available for entities which are deserialized later.
serializer.ReferenceResolver.AddReference(serializer.Context, node.GUID.ToString(), node);
foreach(var p in node.InPorts)
{
serializer.ReferenceResolver.AddReference(serializer.Context, p.GUID.ToString(), p);
}
foreach (var p in node.OutPorts)
{
serializer.ReferenceResolver.AddReference(serializer.Context, p.GUID.ToString(), p);
}
return node;
}
public void CanCreatePreset()
{
//Create a Node
var numberNode = new DoubleInput();
numberNode.Value = "1";
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(numberNode, false);
//verify the node was created
Assert.AreEqual(1, ViewModel.Model.CurrentWorkspace.Nodes.Count());
DynamoSelection.Instance.Selection.Add(numberNode);
//Check for input nodes
Assert.AreEqual(true, ViewModel.GetInputNodesFromSelectionForPresets().Any());
var addNode = new DSFunction(ViewModel.Model.LibraryServices.GetFunctionDescriptor("+"));
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
DynamoSelection.Instance.ClearSelection();
DynamoSelection.Instance.Selection.Add(addNode);
Assert.AreEqual(false, ViewModel.GetInputNodesFromSelectionForPresets().Any());
DynamoSelection.Instance.Selection.Add(numberNode);
//Check for input nodes
Assert.AreEqual(true, ViewModel.GetInputNodesFromSelectionForPresets().Any());
}
public void SelectionDoesNotChangeWhenAddingAlreadySelectedNode()
{
int numNodes = 100;
// create 100 nodes, and select them as you go
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.Nodes.Last());
Assert.AreEqual(i + 1, DynamoSelection.Instance.Selection.Count);
}
// the number selected stays the same
for (int i = 0; i < numNodes; i++)
{
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.Nodes.Last());
Assert.AreEqual(numNodes, DynamoSelection.Instance.Selection.Count);
}
}
public void CanClearWorkspaceWithNodes()
{
Assert.AreEqual(0, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(new DoubleInput(), false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(new DoubleInput(), false);
Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.ClearCurrentWorkspace();
Assert.AreEqual(0, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
public void CanCopydAndPaste2NodesWithRightOffset()
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
addNode.Height = 2;
addNode.Width = 2;
addNode.CenterX = 3;
addNode.CenterY = 2;
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.AddToSelection(addNode);
addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
addNode.Height = 2;
addNode.Width = 2;
addNode.CenterX = 6;
addNode.CenterY = 8;
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.AddToSelection(addNode);
CurrentDynamoModel.Copy();
Assert.AreEqual(2, CurrentDynamoModel.ClipBoard.Count);
CurrentDynamoModel.Paste();
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(22, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(2).X);
Assert.AreEqual(21, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(2).Y);
Assert.AreEqual(25, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3).X);
Assert.AreEqual(27, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3).Y);
}
public void Defect_MAGN_3599()
{
// Create the initial code block node.
var codeBlockNode = CreateCodeBlockNode();
UpdateCodeBlockNodeContent(codeBlockNode, @"Circle.ByCenterPointRadius(pt,5)");
// Create the Point.Origin node.
var pointOriginNode =
new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("Point.Origin"));
var command = new DynCmd.CreateNodeCommand(pointOriginNode, 0, 0, true, false);
CurrentDynamoModel.ExecuteCommand(command);
// Connect the two nodes
ConnectorModel.Make(pointOriginNode, codeBlockNode, 0, 0);
Assert.AreEqual(1, codeBlockNode.InPortData.Count);
// Update the code block node
UpdateCodeBlockNodeContent(codeBlockNode, "pt = Point.ByCoordinates(0,0,0);\nCircle.ByCenterPointRadius(pt,5)");
Assert.AreEqual(0, codeBlockNode.InPortData.Count);
}
public void CanAdd100NodesToClipboardAndPaste3Times()
{
int numNodes = 100;
// create 100 nodes, and select them as you go
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.Nodes.Last());
Assert.AreEqual(i + 1, DynamoSelection.Instance.Selection.Count);
}
CurrentDynamoModel.Copy();
Assert.AreEqual(numNodes, CurrentDynamoModel.ClipBoard.Count);
int numPastes = 3;
for (int i = 1; i <= numPastes; i++)
{
CurrentDynamoModel.Paste();
Assert.AreEqual(numNodes, CurrentDynamoModel.ClipBoard.Count);
Assert.AreEqual(numNodes * (i + 1), CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
}
public void TestDefaultArgumentTooltip()
{
var node =
new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double"));
CurrentDynamoModel.ExecuteCommand(new Dynamo.Models.DynamoModel.CreateNodeCommand(node, 0, 0, true, false));
Assert.IsTrue(node.InPorts[0].ToolTipContent.Equals("double\nDefault value : 0"));
node.InPorts[0].UsingDefaultValue = false;
Assert.IsTrue(node.InPorts[0].ToolTipContent.Equals("double\nDefault value : 0 (disabled)"));
}
public void CanCreatePreset()
{
// Positive test for input node
// Create a valid input node
var numberNode = new DoubleInput();
numberNode.Value = "1";
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(numberNode, false);
// Verify the node was created and select it
Assert.AreEqual(1, ViewModel.Model.CurrentWorkspace.Nodes.Count());
DynamoSelection.Instance.Selection.Add(numberNode);
// Check for input nodes in selection (should pass)
Assert.AreEqual(true, ViewModel.GetInputNodesFromSelectionForPresets().Any());
// Negative test for input node
// Create a non-input node and select it
var addNode = new DSFunction(ViewModel.Model.LibraryServices.GetFunctionDescriptor("+"));
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(addNode, false);
DynamoSelection.Instance.ClearSelection();
DynamoSelection.Instance.Selection.Add(addNode);
// Check for input nodes in selection (should fail)
Assert.AreEqual(false, ViewModel.GetInputNodesFromSelectionForPresets().Any());
// Re-test positive test for input node
// Select the first created input node
DynamoSelection.Instance.Selection.Add(numberNode);
// Check for input nodes in selection (should pass)
Assert.AreEqual(true, ViewModel.GetInputNodesFromSelectionForPresets().Any());
// Positive test for File Path node
// Create a File Path input node and select it
var filePathNode = new Filename();
filePathNode.Value = "C:\\foo.txt";
ViewModel.Model.CurrentWorkspace.AddAndRegisterNode(filePathNode, false);
DynamoSelection.Instance.ClearSelection();
DynamoSelection.Instance.Selection.Add(filePathNode);
// Check for input nodes in selection (should pass)
Assert.AreEqual(true, ViewModel.GetInputNodesFromSelectionForPresets().Any());
}
