/// <summary>
/// Выполняет поиск стандартных элементов, представляющих флажки в документе,
/// по значению параметра <paramref name="name"/> и заполняет их значением параметра <paramref name="value"/>.
/// Если элементы не найдены, действие не выполняется.
/// </summary>
/// <param name="name">Имя целевого(ых) стандартных элементов.</param>
/// <param name="value">Значение для вставки в стандартные элементы.</param>
/// <exception cref="InvalidSdtElementException">
/// Возникает если дерево дочерних элементов <see cref="SdtElement"/> содержит недопустимые элементы
/// или отсутствует обязательный дочерний элемент.
/// </exception>
protected void FillSdtElement(string name, bool value)
{
name.ThrowIfNullOrWhiteSpace(nameof(name));
try
{
foreach (SdtElement element in _elemetns.Where(element => element.SdtProperties.GetFirstChild <SdtAlias>()?.Val == name))
{
if (element.SdtProperties.GetFirstChild <W14.SdtContentCheckBox>() is W14.SdtContentCheckBox contentCheckBox)
{
contentCheckBox.Checked = new W14.Checked()
{
Val = value ? W14.OnOffValues.One : W14.OnOffValues.Zero
};
var sdtContentBlock = new SdtContentBlock();
Run run = sdtContentBlock.AppendChild(new Run());
if (element.SdtProperties.GetFirstChild <RunProperties>() is RunProperties properties)
{
run.AppendChild(properties.CloneNode(true));
}
element.SdtProperties.RemoveAllChildren <SdtPlaceholder>();
run.AppendChild(new Text(contentCheckBox.Checked.Val == W14.OnOffValues.One ? "☒" : "☐"));
element.ReplaceChild(sdtContentBlock, element.LastChild);
}
}
}
catch (InvalidOperationException)
{
throw new InvalidSdtElementException(name);
}
}
/// <summary>
/// Выполняет поиск стандартных элементов в документе по значению <paramref name="name"/>
/// и заполняет их значением <c><paramref name="value"/>.ToString()</c>.
/// Если элементы не найдены, действие не выполняется.
/// </summary>
/// <param name="name">Имя целевого(ых) стандартных элементов.</param>
/// <param name="value">Ссылка на объект, строковое представление которого необходимо поместить в элемент.</param>
/// <exception cref="InvalidSdtElementException">
/// Возникает если дерево дочерних элементов <see cref="SdtElement"/> содержит недопустимые элементы
/// или отсутствует обязательный дочерний элемент.
/// </exception>
protected void FillSdtElement(string name, object value)
{
name.ThrowIfNullOrWhiteSpace(nameof(name));
value.ThrowIfNull(nameof(value));
try
{
foreach (SdtElement element in _elemetns.Where(element => element.SdtProperties.GetFirstChild <SdtAlias>()?.Val == name))
{
var newContentBlock = new SdtContentRun();
Run run = newContentBlock.AppendChild(new Run());
if (element.SdtProperties.GetFirstChild <RunProperties>() is RunProperties properties)
{
run.AppendChild(properties.CloneNode(true));
}
element.SdtProperties.RemoveAllChildren <SdtPlaceholder>();
run.AppendChild(new Text(value.ToString()));
element.ReplaceChild(newContentBlock, element.LastChild);
}
}
catch (InvalidOperationException)
{
throw new InvalidSdtElementException(name);
}
}
public static void InsertText(String text, String styleXml, OpenXmlElement parentNode)
{
// Разделить строку на подстроки
//String[] runs = macroVarValue.Split(new char[] { '\r', '\n' });
//String[] runs = Regex.Split(macroVarValue, "\r\n|\r|\n");
String[] runs = Regex.Split(text, "\r\n");
// Вставить текст
foreach (String run in runs)
{
// Создать новый Paragraph
Paragraph newParagraph = parentNode.AppendChild(new Paragraph());
// Вернуть старый стиль в Paragraph
ParagraphProperties newParagraphProperties = newParagraph.AppendChild(new ParagraphProperties());
newParagraphProperties.InnerXml = styleXml;
// Создать новый Run
Run newRun = newParagraph.AppendChild(new Run());
// Вернуть старый стиль в Run
RunProperties newRunProperties = newRun.AppendChild(new RunProperties());
newRunProperties.InnerXml = styleXml;
// Вставить в него текст
newRun.AppendChild(new Text(run));
}
}
private void AddPersonalRow(Body body, OpenXmlElement after, string firstName, string lastName, string city)
{
Paragraph par = new Paragraph();
var run = new Run();
run.RunProperties = new RunProperties();
run.RunProperties.FontSize = new FontSize();
run.RunProperties.FontSize.Val = new StringValue("28");
run.AppendChild(new Break());
run.AppendChild(new TabChar());
run.AppendChild(new Text($"{firstName} {lastName}, {city}"));
par.AppendChild(run);
body.InsertAfter(par, after);
}
/**public void getFooterWithPageNumber()
* {
* foreach (Section wordSection in this.adoc.Sections)
* {
* Range footerRange = wordSection.Footers[WdHeaderFooterIndex.wdHeaderFooterPrimary].Range;
* footerRange.InlineShapes.AddHorizontalLineStandard();
* footerRange.Font.ColorIndex = WdColorIndex.wdDarkRed;
* footerRange.Font.Size = 10;
* footerRange.ParagraphFormat.Alignment = WdParagraphAlignment.wdAlignParagraphCenter;
* adoc.Sections[1].Footers[WdHeaderFooterIndex.wdHeaderFooterPrimary].PageNumbers.Add();
* }
* }**/
public void generateCoverPage(string data)
{
body.Append(new Paragraph(new Run(new Break())));
body.Append(new Paragraph(new Run(new Break())));
body.Append(new Paragraph(new Run(new Break())));
body.Append(new Paragraph(new Run(new Break())));
//heading
Paragraph heading = new Paragraph();
ParagraphProperties hp = new ParagraphProperties();
hp.Justification = new Justification()
{
Val = JustificationValues.Center
};
heading.Append(hp);
Run r = new Run();
RunProperties runProperties = r.AppendChild(new RunProperties());
Bold bold = new Bold();
bold.Val = OnOffValue.FromBoolean(true);
FontSize size = new FontSize();
size.Val = "60";
runProperties.AppendChild(bold);
runProperties.AppendChild(size);
Text t = new Text(data);
r.Append(t);
heading.Append(r);
body.Append(heading);
//subheading
Paragraph subheading = new Paragraph();
ParagraphProperties shp = new ParagraphProperties();
shp.Justification = new Justification()
{
Val = JustificationValues.Center
};
subheading.Append(shp);
Run rs = new Run();
RunProperties rhProperties = rs.AppendChild(new RunProperties());
Bold bs = new Bold();
bs.Val = OnOffValue.FromBoolean(true);
FontSize sh = new FontSize();
sh.Val = "40";
rhProperties.AppendChild(bs);
rhProperties.AppendChild(sh);
Text subhead = new Text("BUSINESS PLAN");
rs.Append(subhead);
subheading.Append(rs);
body.Append(subheading);
addPageBreak();
}
private static Run CreateParagraphRun(RunProperties runProperties, string paragraphText)
{
var run = new Run();
run.AppendChild(runProperties.CloneNode(true));
ParseTextForOpenXml(run, paragraphText);
return(run);
}
// Add the bold style at a Run object used by a Paragraph in order to insert text in a Document.
public RunProperties getBold(Run run)
{
RunProperties runProperties = run.AppendChild(new RunProperties());
var bold = new Bold();
bold.Val = OnOffValue.FromBoolean(true);
runProperties.AppendChild(bold);
return(runProperties);
}
public static void CreateWordprocessingDocument(string filepath, List <Student> st)
{
String fileName = Constants.Locations.ImagesFolder + "/" + Constants.Locations.ImageFile;
using (WordprocessingDocument wordDocument =
WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
// Add a main document part.
MainDocumentPart mainPart = wordDocument.AddMainDocumentPart();
// Create the document structure and add some text.
mainPart.Document = new Document();
Body body = mainPart.Document.AppendChild(new Body());
foreach (var stu in st)
{
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
run.AppendChild(new Text("Hello , my name is " + stu.FirstName + " " + stu.LastName + "\n\n"));
string imageFilePath = stu.FullPathUrl + "/" + Constants.Locations.ImageFile;
var ImageBytes = FTP.DownloadFileBytes(imageFilePath);
SaveBytesToFile(fileName, ImageBytes);
ImagePart imagePart = mainPart.AddImagePart(ImagePartType.Jpeg);
using (FileStream stream = new FileStream(fileName, FileMode.Open))
{
imagePart.FeedData(stream);
}
AddImageToBody(wordDocument, mainPart.GetIdOfPart(imagePart));
Paragraph PageBreakParagraph = new Paragraph(new DocumentFormat.OpenXml.Wordprocessing.Run(new DocumentFormat.OpenXml.Wordprocessing.Break()
{
Type = BreakValues.Page
}));
body.Append(PageBreakParagraph);
}
// var styles = ExtractStylesPart(filepath, true);
}
}
public void InsertDecisionDetailViewMessage()
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(new Text(++_diagmarCounter + ". Decision Detail View"));
// _body.AppendChild(new Paragraph(new Run(new Text(++_diagmarCounter + ". Decision Detail View"))));
_body.AppendChild(new Paragraph());
}
public void InsertDecisionWithoutTopicMessage()
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(new Text(++_diagmarCounter + ". Decisions without topic"));
//_body.AppendChild(new Paragraph(new Run(new Text("Decisions not included in a topic:"))));
_body.AppendChild(new Paragraph());
}
public static WP.Paragraph GenerateParagraphWithText(string content)
{
var p = new WP.Paragraph();
var r = new WP.Run();
var text = new WP.Text(content);
r.AppendChild(text);
p.AppendChild(r);
return(p);
}
/// <summary>
/// Create a new document, append a single paragraph, set font and color.
/// </summary>
/// <returns>Is valid document</returns>
public bool CreateDocumentWithSimpleParagraph(string pFileName)
{
mHasException = false;
var fileName = Path.Combine(DocumentFolder, pFileName);
if (File.Exists(fileName))
{
File.Delete(fileName);
}
using (var document = WordprocessingDocument.Create(fileName, WordprocessingDocumentType.Document))
{
MainDocumentPart mainPart = document.AddMainDocumentPart();
mainPart.Document = new Document();
var body = mainPart.Document.AppendChild(new Body());
var para = body.AppendChild(new Paragraph());
Run runPara = para.AppendChild(new Run());
// Set the font to Arial to the first Run.
var runProperties = new RunProperties(
new RunFonts()
{
Ascii = "Arial"
});
var color = new Color {
Val = Helpers.ColorConverter(System.Drawing.Color.SandyBrown)
};
runProperties.Append(color);
Run run = document.MainDocumentPart.Document.Descendants <Run>().First();
run.PrependChild <RunProperties>(runProperties);
var paragraphText =
"The most basic unit of block-level content within a Word processing document, paragraphs are " +
"stored using the <p> element. A paragraph defines a distinct division of content that begins on " +
"a new line. A paragraph can contain three pieces of information: optional paragraph properties, " +
"inline content (typically runs), and a set of optional revision IDs used to compare the content " +
"of two documents.";
runPara.AppendChild(new Text(paragraphText));
mainPart.Document.Save();
}
return(Helpers.ValidateWordDocument(fileName) == 0);
}
public static void InsertHeader(string header, WordprocessingDocument wordDoc, string currentHeader)
{
if (header != currentHeader)
{
//if currentHeader is not equal to new header, insert new header.
currentHeader = header;
Body body = wordDoc.MainDocumentPart.Document.Body;
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
run.AppendChild(new Text(currentHeader));
}
}
public static void CreateWordprocessingDocument(string filepath)
{
// Create a document by supplying the filepath.
using (var wordprocessingDocument = WordprocessingDocument.Create(filepath, DocumentFormat.OpenXml.WordprocessingDocumentType.Document))
{
MainDocumentPart mainPart = wordprocessingDocument.AddMainDocumentPart();
mainPart.Document = new DocumentFormat.OpenXml.Wordprocessing.Document();
Body body = mainPart.Document.AppendChild(new Body());
DocumentFormat.OpenXml.Wordprocessing.Paragraph para = body.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Paragraph());
DocumentFormat.OpenXml.Wordprocessing.Run run = para.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Run());
run.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Text("siddiq"));
wordprocessingDocument.MainDocumentPart.Document.Save();
}
}
public void InsertTopicTable(ITopic topic)
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading3(run);
run.AppendChild(new Text(_diagmarCounter + "." + (++_topicCounter) + ". " + topic.Name));
//_body.AppendChild(new Paragraph(new Run(new Text(_diagmarCounter + "." + (++_topicCounter) + ". " + topic.Name)))); //Topic Name
if (topic.Description != "")
{
_body.AppendChild(new Paragraph(new Run(new Text(topic.Description)))); //Topic Desc
}
_body.AppendChild(new Paragraph());
}
public void InsertDiagramImage(IEADiagram diagram)
{
if (diagram.IsRelationshipView())
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(new Text(++_diagmarCounter + ". Relationship View: " + diagram.Name));
//_body.AppendChild(new Paragraph(new Run(new Text(++_diagmarCounter + ". Relationship Viewpoint"))));
}
else if (diagram.IsStakeholderInvolvementView())
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(
new Text(++_diagmarCounter + ". Decision Stakeholder Involvement View: " + diagram.Name));
//_body.AppendChild(new Paragraph(new Run(new Text(++_diagmarCounter + ". Decision Stakeholder Involvement Viewpoint"))));
}
else if (diagram.IsChronologicalView())
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(new Text(++_diagmarCounter + ". Decision Chronological View: " + diagram.Name));
//_body.AppendChild(new Paragraph(new Run(new Text(++_diagmarCounter + ". Decision Chronological Viewpoint"))));
}
else
{
return;
}
_body.AppendChild(new Paragraph(new Run(new Text())));
ImagePart imagePart = _mainPart.AddImagePart(ImagePartType.Emf);
FileStream fs = diagram.DiagramToStream();
imagePart.FeedData(fs);
Image image = Image.FromFile(fs.Name);
AddImageToBody(_mainPart.GetIdOfPart(imagePart), Utils.GetImageSize(image));
//cleanup:
fs.Close();
image.Dispose();
File.Delete(fs.Name);
}
private void NextLevel_1(string pFileName)
{
var fileName = Path.Combine(DocumentFolder, pFileName);
if (File.Exists(fileName))
{
File.Delete(fileName);
}
using (var document = WordprocessingDocument.Create(fileName, WordprocessingDocumentType.Document))
{
MainDocumentPart mainPart = document.AddMainDocumentPart();
mainPart.Document = new Document();
var body = mainPart.Document.AppendChild(new Body());
var para = body.AppendChild(new Paragraph());
Run runPara = para.AppendChild(new Run());
// Set the font to Arial to the first Run.
var runProperties = new RunProperties(
new RunFonts()
{
Ascii = "Arial"
});
var color = new Color {
Val = Helpers.ColorConverter(System.Drawing.Color.SandyBrown)
};
runProperties.Append(color);
Run run = document.MainDocumentPart.Document.Descendants <Run>().First();
run.PrependChild <RunProperties>(runProperties);
var paragraphText = "Styling paragraph with font color";
runPara.AppendChild(new Text(paragraphText));
mainPart.Document.Save();
}
Console.WriteLine(Helpers.ValidateWordDocument(fileName));
}
public static void createDocument(string filepath)
{
// Create a document by supplying the filepath.
using (WordprocessingDocument wordDocument =
WordprocessingDocument.Create(filepath, DocumentFormat.OpenXml.WordprocessingDocumentType.Document))
{
// Add a main document part.
MainDocumentPart mainPart = wordDocument.AddMainDocumentPart();
// Create the document structure and add some text.
mainPart.Document = new Document();
Body body = mainPart.Document.AppendChild(new Body());
DocumentFormat.OpenXml.Wordprocessing.Paragraph para = body.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Paragraph());
DocumentFormat.OpenXml.Wordprocessing.Run run = para.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Run());
run.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Text("HQ - QUANTUM 2012"));
}
}
// Add properties with a stykle similar to Heading 3 style at a Run object used by a Paragraph in order to insert text in a Document.
public RunProperties getHeading3(Run run)
{
RunProperties runProperties = run.AppendChild(new RunProperties());
var bold = new Bold();
bold.Val = OnOffValue.FromBoolean(true);
var color = new Color {
Val = "365F91", ThemeColor = ThemeColorValues.Accent1, ThemeShade = "BF"
};
var size = new FontSize {
Val = new StringValue("25")
};
runProperties.AppendChild(bold);
runProperties.AppendChild(color);
runProperties.AppendChild(size);
return(runProperties);
}
private List <string> ExtractImages(Body content, MainDocumentPart wDoc, string imageFolderPath)
{
List <string> imageList = new List <string>();
foreach (DocumentFormat.OpenXml.Wordprocessing.Paragraph par in content.Descendants <DocumentFormat.OpenXml.Wordprocessing.Paragraph>())
{
ParagraphProperties paragraphProperties = par.ParagraphProperties;
for (int i = 0; i < par.Descendants <Run>().Count(); i++)
{
Run run = par.Descendants <Run>().ElementAt(i);
Drawing image =
run.Descendants <Drawing>().FirstOrDefault();
if (image != null)
{
var imageFirst = image.Inline.Graphic.GraphicData.Descendants <DocumentFormat.OpenXml.Drawing.Pictures.Picture>().FirstOrDefault();
var blip = imageFirst.BlipFill.Blip.Embed.Value;
ImagePart img = (ImagePart)wDoc.Document.MainDocumentPart.GetPartById(blip);
string imageFileName = string.Empty;
string imageFilePath = string.Empty;
using (Image toSaveImage = Bitmap.FromStream(img.GetStream()))
{
imageFileName = "Img_" + imageCount;
imageFilePath = imageFolderPath + "\\" + imageFileName + ".png";
try
{
toSaveImage.Save(imageFilePath, ImageFormat.Png);
}
catch (Exception ex)
{
}
}
imageList.Add(imageFilePath);
Run run2 = par.Descendants <Run>().ElementAt(i - 1);
run2.AppendChild(new Text(" Images/" + imageFileName + ".png"));
image.Remove();
imageCount++;
}
}
}
return(imageList);
}
public WordDocument(string filename)
{
_filename = filename;
using (
WordprocessingDocument wordDoc = WordprocessingDocument.Create(_filename,
WordprocessingDocumentType.Document))
{
_mainPart = wordDoc.AddMainDocumentPart();
_mainPart.Document = new Document();
_body = _mainPart.Document.AppendChild(new Body());
DateTime saveNow = DateTime.Now;
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading1(run);
run.AppendChild(new Text("Decision Report [" + saveNow + "]"));
//_body.Append(new Paragraph(new Run(new Text("Decision Report [" + saveNow + "]"))));
_body.AppendChild(new Paragraph());
}
}
/// <summary>
/// Add the text paragraph.
/// </summary>
/// <param name="txt">The text.</param>
/// <param name="boldStyle">if set to <c>true</c> [bold style].</param>
public void AddTextParagraph(
string txt,
bool boldStyle)
{
// Assign a reference to the existing document body.
Body body = _wordProcessingDocument.MainDocumentPart.Document.Body;
// Add new text.
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
run.AppendChild(new Text(txt));
//create RunProperties and append styles
RunProperties runProperties = new RunProperties();
if (boldStyle)
{
runProperties.Append(new Bold());
}
// Set the RunProperties to the RunProperties containing the styles
run.RunProperties = runProperties;
}
public static void CreateWordprocessingDocument(string filepath, string myimage, List <Student> students)
{
// Create a document by supplying the filepath.
using (WordprocessingDocument wordDocument =
WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
// Add a main document part.
MainDocumentPart mainPart = wordDocument.AddMainDocumentPart();
ImagePart imagePart = mainPart.AddImagePart(ImagePartType.Jpeg);
// Create the document structure and add some text.
mainPart.Document = new Document();
Body body = mainPart.Document.AppendChild(new Body());
Paragraph para = body.AppendChild(new Paragraph());
Run run1 = para.AppendChild(new Run());
run1.AppendChild(new Text("Here is a list of students from the ftp directory, with each student getting their own page: "));
foreach (var student in students)
{
Paragraph para2 = body.AppendChild(new Paragraph());
Run run2 = para2.AppendChild(new Run(
new Break()
{
Type = BreakValues.Page
}));
run2.AppendChild(new Text(student.FirstName + " " + student.LastName));
if (student.MyRecord == true)
{
using (FileStream stream = new FileStream(Constants.Locations.imgpath, FileMode.Open))
{
imagePart.FeedData(stream);
}
AddImageToBody(wordDocument, mainPart.GetIdOfPart(imagePart));
}
}
}
}
public static void Insert(string fullPathToDocument, string fullPathToImageFile)
{
List <KeyValuePair <string, string> > keyValuePairs = new List <KeyValuePair <string, string> >();
keyValuePairs.Add(new KeyValuePair <string, string>("Deponi", "Picture 1"));
keyValuePairs.Add(new KeyValuePair <string, string>("Deponi", "Picture 2"));
keyValuePairs.Add(new KeyValuePair <string, string>("Deponi", "Picture 3"));
keyValuePairs.Add(new KeyValuePair <string, string>("Have", "Picture 4"));
keyValuePairs.Add(new KeyValuePair <string, string>("Metal", "Picture 5"));
keyValuePairs.Add(new KeyValuePair <string, string>("Metal", "Picture 6"));
using (WordprocessingDocument wordDoc = WordprocessingDocument.Open(fullPathToDocument, true))
{
string currentHeader = "";
foreach (var keyValuePair in keyValuePairs)
{
if (currentHeader != keyValuePair.Key)
{
if (!string.IsNullOrEmpty(currentHeader))
{
// insert pakebreak
Body body = wordDoc.MainDocumentPart.Document.Body;
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
Break pageBreak = run.AppendChild(new Break());
pageBreak.Type = BreakValues.Page;
}
InsertHeader(keyValuePair.Key, wordDoc, currentHeader);
currentHeader = keyValuePair.Key;
}
InsertPicture(keyValuePair.Value, wordDoc);
}
}
}
/// <summary>
/// Creates an image paragraph.
/// </summary>
/// <param name="relationshipId">The relationship id.</param>
/// <param name="name">The name.</param>
/// <param name="description">The description.</param>
/// <param name="width">The width.</param>
/// <param name="height">The height.</param>
/// <returns>The <see cref="Paragraph" /> containing the image.</returns>
private DocumentFormat.OpenXml.Wordprocessing.Paragraph CreateImageParagraph(
string relationshipId, string name, string description, double width, double height)
{
// http://msdn.microsoft.com/en-us/library/documentformat.openxml.drawing.extents.aspx
// http://polymathprogrammer.com/2009/10/22/english-metric-units-and-open-xml/
// cx (Extent Length)
// Specifies the length of the extents rectangle in EMUs. This rectangle shall dictate the size of the object as displayed (the result of any scaling to the original object).
// Example: Consider a DrawingML object specified as follows:
// <… cx="1828800" cy="200000"/>
// The cx attributes specifies that this object has a height of 1828800 EMUs (English Metric Units). end example]
// The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§20.1.10.42).
// cy (Extent Width)
// Specifies the width of the extents rectangle in EMUs. This rectangle shall dictate the size of the object as displayed (the result of any scaling to the original object).
// Example: Consider a DrawingML object specified as follows:
// < … cx="1828800" cy="200000"/>
// The cy attribute specifies that this object has a width of 200000 EMUs (English Metric Units). end example]
// The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§20.1.10.42).
var paragraph1 = new DocumentFormat.OpenXml.Wordprocessing.Paragraph
{
RsidParagraphAddition = "00D91137",
RsidRunAdditionDefault = "00AC08EB"
};
var run1 = new Run();
var runProperties1 = new RunProperties();
var noProof1 = new NoProof();
runProperties1.AppendChild(noProof1);
var drawing1 = new Drawing();
var inline1 = new Inline
{
DistanceFromTop = 0U,
DistanceFromBottom = 0U,
DistanceFromLeft = 0U,
DistanceFromRight = 0U
};
var extent1 = new Extent {
Cx = 5753100L, Cy = 3600450L
};
extent1.Cx = (long)(width * 914400);
extent1.Cy = (long)(height * 914400);
var effectExtent1 = new EffectExtent {
LeftEdge = 0L, TopEdge = 0L, RightEdge = 0L, BottomEdge = 0L
};
var docProperties1 = new DocProperties {
Id = 1U, Name = name, Description = description
};
var nonVisualGraphicFrameDrawingProperties1 = new NonVisualGraphicFrameDrawingProperties();
var graphicFrameLocks1 = new GraphicFrameLocks {
NoChangeAspect = true
};
graphicFrameLocks1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
nonVisualGraphicFrameDrawingProperties1.AppendChild(graphicFrameLocks1);
var graphic1 = new Graphic();
graphic1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
var graphicData1 = new GraphicData {
Uri = "http://schemas.openxmlformats.org/drawingml/2006/picture"
};
var picture1 = new Picture();
picture1.AddNamespaceDeclaration("pic", "http://schemas.openxmlformats.org/drawingml/2006/picture");
var nonVisualPictureProperties1 = new NonVisualPictureProperties();
var nonVisualDrawingProperties1 = new NonVisualDrawingProperties
{
Id = 0U,
Name = name,
Description = description
};
var nonVisualPictureDrawingProperties1 = new NonVisualPictureDrawingProperties();
var pictureLocks1 = new PictureLocks {
NoChangeAspect = true, NoChangeArrowheads = true
};
nonVisualPictureDrawingProperties1.AppendChild(pictureLocks1);
nonVisualPictureProperties1.AppendChild(nonVisualDrawingProperties1);
nonVisualPictureProperties1.AppendChild(nonVisualPictureDrawingProperties1);
var blipFill1 = new BlipFill();
var blip1 = new Blip {
Embed = relationshipId
};
var blipExtensionList1 = new BlipExtensionList();
var blipExtension1 = new BlipExtension {
Uri = "{28A0092B-C50C-407E-A947-70E740481C1C}"
};
var useLocalDpi1 = new UseLocalDpi {
Val = false
};
useLocalDpi1.AddNamespaceDeclaration("a14", "http://schemas.microsoft.com/office/drawing/2010/main");
blipExtension1.AppendChild(useLocalDpi1);
blipExtensionList1.AppendChild(blipExtension1);
blip1.AppendChild(blipExtensionList1);
var sourceRectangle1 = new SourceRectangle();
var stretch1 = new Stretch();
var fillRectangle1 = new FillRectangle();
stretch1.AppendChild(fillRectangle1);
blipFill1.AppendChild(blip1);
blipFill1.AppendChild(sourceRectangle1);
blipFill1.AppendChild(stretch1);
var shapeProperties1 = new ShapeProperties {
BlackWhiteMode = BlackWhiteModeValues.Auto
};
var transform2D1 = new Transform2D();
var offset1 = new Offset {
X = 0L, Y = 0L
};
var extents1 = new Extents {
Cx = extent1.Cx, Cy = extent1.Cy
};
transform2D1.AppendChild(offset1);
transform2D1.AppendChild(extents1);
var presetGeometry1 = new PresetGeometry {
Preset = ShapeTypeValues.Rectangle
};
var adjustValueList1 = new AdjustValueList();
presetGeometry1.AppendChild(adjustValueList1);
var noFill1 = new NoFill();
var outline1 = new Outline();
var noFill2 = new NoFill();
outline1.AppendChild(noFill2);
shapeProperties1.AppendChild(transform2D1);
shapeProperties1.AppendChild(presetGeometry1);
shapeProperties1.AppendChild(noFill1);
shapeProperties1.AppendChild(outline1);
picture1.AppendChild(nonVisualPictureProperties1);
picture1.AppendChild(blipFill1);
picture1.AppendChild(shapeProperties1);
graphicData1.AppendChild(picture1);
graphic1.AppendChild(graphicData1);
inline1.AppendChild(extent1);
inline1.AppendChild(effectExtent1);
inline1.AppendChild(docProperties1);
inline1.AppendChild(nonVisualGraphicFrameDrawingProperties1);
inline1.AppendChild(graphic1);
drawing1.AppendChild(inline1);
run1.AppendChild(runProperties1);
run1.AppendChild(drawing1);
paragraph1.AppendChild(run1);
return(paragraph1);
}
//replaces all relative subflow file paths with absolute subflow file path
private void ProcessSubFlows(string originalDocFilePath, string duplicateDocFilePath, bool deploy)
{
WordprocessingDocument duplicateDoc = WordprocessingDocument.Open(duplicateDocFilePath, true);
var paragraphs = duplicateDoc.MainDocumentPart.RootElement.Descendants <DocumentFormat.OpenXml.Wordprocessing.Paragraph>();
foreach (DocumentFormat.OpenXml.Wordprocessing.Paragraph paragraph in paragraphs)
{
string firstWord = paragraph.InnerText.ToLower().TrimStart().Split(' ')[0];
if (firstWord == "tagui")
{
subFlowCount++;
subFlowTotal++;
string subflowFilePath = "";
string[] arr = paragraph.InnerText.ToLower().TrimStart().Split(' ');
for (int i = 1; i < arr.Length; i++)
{
subflowFilePath += arr[i] + " ";
}
string subflowAbsFilePath = subflowFilePath;
if (!subflowFilePath.Contains(":"))
{
subflowAbsFilePath = GetFlowFolderPath() + subflowFilePath;
}
foreach (Run run in paragraph.Descendants <Run>())
{
run.RemoveAllChildren <Text>();
}
Run newRun = paragraph.AppendChild(new Run());
string workingFolder = GetWorkingFolderPath(deploy);
newRun.AppendChild(new Text("tagui " + workingFolder + "WorkFlow" + subFlowCount + ".tag"));
subFlowFilePaths.Add(subflowAbsFilePath);
}
if (firstWord == "write" || firstWord == "dump" || firstWord == "save" || firstWord == "table")
{
string[] arr = paragraph.InnerText.ToLower().TrimStart().Split(' ');
string lastWord = arr[arr.Length - 1];
if (lastWord.Substring(lastWord.Length - 3).ToLower() == "csv")
{
for (int i = arr.Length - 1; i > 0; i--)
{
if (arr[i] == "to")
{
string csvFile = GetSavedFolderPath();
for (int j = i + 1; j < arr.Length; j++)
{
csvFile += arr[j];
if (j != arr.Length - 1)
{
csvFile += " ";
}
}
if (!csvList.Any(x => csvList.Contains(csvFile)))
{
csvList.Add(csvFile);
}
break;
}
}
}
}
}
duplicateDoc.Close();
}
public void InsertForcesTable(IForcesModel forces)
{
Paragraph para = _body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
RunProperties runProperties = getHeading2(run);
run.AppendChild(new Text(++_diagmarCounter + ". Decision Forces Viewpoint: " + forces.Name));
//_body.AppendChild(new Paragraph(new Run(new Text(++_diagmarCounter + ". Decision Forces Viewpoint"))));
_body.AppendChild(new Paragraph(new Run(new Text())));
var table = new Table();
var props = new TableProperties(
new TableBorders(
new TopBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
},
new BottomBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
},
new LeftBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
},
new RightBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
},
new InsideHorizontalBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
},
new InsideVerticalBorder
{
Val = new EnumValue <BorderValues>(BorderValues.Single),
Size = 11
}));
table.AppendChild(props);
var emptyCell = new TableCell();
// insert an empty cell in tol left of forces table
var decRow = new TableRow();
decRow.AppendChild(emptyCell);
emptyCell.AppendChild(new Paragraph(new Run(new Text(""))));
// insert the concern header and the decisions names
var concCellHeader = new TableCell(new Paragraph(new Run(new Text("Concerns"))));
decRow.AppendChild(concCellHeader);
foreach (
TableCell decCell in
forces.GetDecisions()
.Select(decision => new TableCell(new Paragraph(new Run(new Text(decision.Name))))))
{
decRow.AppendChild(decCell);
}
table.AppendChild(decRow);
foreach (var concernsPerForces in forces.GetConcernsPerForce())
{
IEAElement force = concernsPerForces.Key;
List <IEAElement> concerns = concernsPerForces.Value;
foreach (IEAElement concern in concerns)
{
var forceRow = new TableRow();
var forceCell = new TableCell(new Paragraph(new Run(new Text(force.Name))));
forceRow.AppendChild(forceCell);
var concCell = new TableCell();
concCell.AppendChild(new Paragraph(new Run(new Text(concern.Name))));
forceRow.AppendChild(concCell);
// insert ratings
foreach (Rating rating in forces.GetRatings())
{
if (rating.ForceGUID != force.GUID || rating.ConcernGUID != concern.GUID)
{
continue;
}
if (forces.GetDecisions().Any(decision => rating.DecisionGUID == decision.GUID))
{
var ratCell = new TableCell();
ratCell.AppendChild(new Paragraph(new Run(new Text(rating.Value))));
forceRow.AppendChild(ratCell);
}
}
table.AppendChild(forceRow);
}
}
_body.AppendChild(table);
_body.AppendChild(new Paragraph());
}
public static void CreateWordprocessingDocumentFromApi(string filepath, List <StudentNewModel> st)
{
String fileName = "Users/kavyaarora/Downloads/CSV-2 3/Content/Images/MyImage.jpg";
using (WordprocessingDocument wordDocument =
WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
// Add a main document part.
MainDocumentPart mainPart = wordDocument.AddMainDocumentPart();
// Create the document structure and add some text.
mainPart.Document = new Document();
Body body = mainPart.Document.AppendChild(new Body());
foreach (var stu in st)
{
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
run.AppendChild(new Text("Id: " + stu.Id));
Paragraph para0 = body.AppendChild(new Paragraph());
Run run0 = para0.AppendChild(new Run());
run0.AppendChild(new Text("Username: "******"Name: " + stu.Name));
Paragraph para2 = body.AppendChild(new Paragraph());
Run run2 = para2.AppendChild(new Run());
run2.AppendChild(new Text("Phone: " + stu.Phone));
Paragraph para3 = body.AppendChild(new Paragraph());
Run run3 = para3.AppendChild(new Run());
run3.AppendChild(new Text("Email: " + stu.Email));
Paragraph para4 = body.AppendChild(new Paragraph());
Run run4 = para4.AppendChild(new Run());
run4.AppendChild(new Text("Website: " + stu.Website));
Paragraph PageBreakParagraph = new Paragraph(new DocumentFormat.OpenXml.Wordprocessing.Run(new DocumentFormat.OpenXml.Wordprocessing.Break()
{
Type = BreakValues.Page
}));
body.Append(PageBreakParagraph);
}
// var styles = ExtractStylesPart(filepath, true);
}
}
Word.TableRow CreateRow(ArrayList cellText)
{
Word.TableRow tr = new Word.TableRow();
// Create cells with simple text.
foreach (string s in cellText)
{
Word.TableCell tc = new Word.TableCell();
Word.Paragraph p = new Word.Paragraph();
Word.Run r = new Word.Run();
Word.Text t = new Word.Text(s);
r.AppendChild(t);
p.AppendChild(r);
tc.AppendChild(p);
tr.AppendChild(tc);
}
return tr;
}
/// <summary>
/// Create a new document, append a single paragraph, set font and color.
/// - add first paragraph with normal style, color brown
/// - add second paragraph with normal style, default color
/// - add a third paragraph with part bold and highlight/shade, part normal.
/// </summary>
/// <returns>Is valid document</returns>
public bool CreateDocumentWithMultipleParagraphAndImage(string pFileName)
{
mHasException = false;
var fileName = Path.Combine(DocumentFolder, pFileName);
if (File.Exists(fileName))
{
File.Delete(fileName);
}
using (var document = WordprocessingDocument.Create(fileName, WordprocessingDocumentType.Document))
{
MainDocumentPart mainPart = document.AddMainDocumentPart();
mainPart.Document = new Document();
var body = mainPart.Document.AppendChild(new Body());
var para = body.AppendChild(new Paragraph());
Run runPara = para.AppendChild(new Run());
// Set the font to Arial to the first Run.
var runProperties = new RunProperties(
new RunFonts()
{
Ascii = "Arial"
});
var color = new Color {
Val = Helpers.ColorConverter(System.Drawing.Color.Brown)
};
runProperties.Append(color);
Run run = document.MainDocumentPart.Document.Descendants <Run>().First();
run.PrependChild <RunProperties>(runProperties);
var paragraphText =
"The most basic unit of block-level content within a Word processing document, paragraphs are " +
"stored using the <p> element. A paragraph defines a distinct division of content that begins on " +
"a new line. A paragraph can contain three pieces of information: optional paragraph properties, " +
"inline content (typically runs), and a set of optional revision IDs used to compare the content " +
"of two documents.";
runPara.AppendChild(new Text(paragraphText));
// add second paragraph
para = body.AppendChild(new Paragraph());
runPara = para.AppendChild(new Run());
paragraphText =
"A paragraph's properties are specified via the <pPr>element. Some examples of paragraph properties " +
"are alignment, border, hyphenation override, indentation, line spacing, shading, text direction, " +
"and widow/orphan control.";
runPara.AppendChild(new Text(paragraphText));
// Highlight and bold some text.
para = body.AppendChild(new Paragraph());
run = para.AppendChild(new Run());
runProperties = run.AppendChild(new RunProperties());
runProperties.AppendChild(new Bold {
Val = OnOffValue.FromBoolean(true)
});
var shading = new Shading()
{
Val = ShadingPatternValues.Clear,
Fill = Helpers.ColorConverter(System.Drawing.Color.Yellow)
};
runProperties.Append(shading);
run.AppendChild(new Text("This is highlight/bold"));
// back to normal text
run = para.AppendChild(new Run());
run.AppendChild(new Text(", and this text is normal."));
int imageWidth = 0;
int imageHeight = 0;
ImagePart imagePart = mainPart.AddImagePart(ImagePartType.Jpeg);
var imageFileName = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "Images", "F2.png");
using (var image = new System.Drawing.Bitmap(imageFileName))
{
imageWidth = image.Width;
imageHeight = image.Height;
}
using (var stream = new FileStream(imageFileName, FileMode.Open))
{
imagePart.FeedData(stream);
}
Helpers.AddImageToBody(document, mainPart.GetIdOfPart(imagePart), imageWidth.PixelToEmu(), imageHeight.PixelToEmu());
para = body.AppendChild(new Paragraph());
run = para.AppendChild(new Run());
run.AppendChild(new Text("We just inserted an image."));
mainPart.Document.Save();
}
return(Helpers.ValidateWordDocument(fileName) == 0);
}
/// <summary>
/// Creates an image paragraph.
/// </summary>
/// <param name="relationshipId">The relationship id.</param>
/// <param name="name">The name.</param>
/// <param name="description">The description.</param>
/// <param name="width">The width.</param>
/// <param name="height">The height.</param>
/// <returns>The <see cref="Paragraph" /> containing the image.</returns>
private DocumentFormat.OpenXml.Wordprocessing.Paragraph CreateImageParagraph(
string relationshipId, string name, string description, double width, double height)
{
// http://msdn.microsoft.com/en-us/library/documentformat.openxml.drawing.extents.aspx
// http://polymathprogrammer.com/2009/10/22/english-metric-units-and-open-xml/
// cx (Extent Length)
// Specifies the length of the extents rectangle in EMUs. This rectangle shall dictate the size of the object as displayed (the result of any scaling to the original object).
// Example: Consider a DrawingML object specified as follows:
// <… cx="1828800" cy="200000"/>
// The cx attributes specifies that this object has a height of 1828800 EMUs (English Metric Units). end example]
// The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§20.1.10.42).
// cy (Extent Width)
// Specifies the width of the extents rectangle in EMUs. This rectangle shall dictate the size of the object as displayed (the result of any scaling to the original object).
// Example: Consider a DrawingML object specified as follows:
// < … cx="1828800" cy="200000"/>
// The cy attribute specifies that this object has a width of 200000 EMUs (English Metric Units). end example]
// The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§20.1.10.42).
var paragraph1 = new DocumentFormat.OpenXml.Wordprocessing.Paragraph
{
RsidParagraphAddition = "00D91137",
RsidRunAdditionDefault = "00AC08EB"
};
var run1 = new Run();
var runProperties1 = new RunProperties();
var noProof1 = new NoProof();
runProperties1.AppendChild(noProof1);
var drawing1 = new Drawing();
var inline1 = new Inline
{
DistanceFromTop = 0U,
DistanceFromBottom = 0U,
DistanceFromLeft = 0U,
DistanceFromRight = 0U
};
var extent1 = new Extent { Cx = 5753100L, Cy = 3600450L };
extent1.Cx = (long)(width * 914400);
extent1.Cy = (long)(height * 914400);
var effectExtent1 = new EffectExtent { LeftEdge = 0L, TopEdge = 0L, RightEdge = 0L, BottomEdge = 0L };
var docProperties1 = new DocProperties { Id = 1U, Name = name, Description = description };
var nonVisualGraphicFrameDrawingProperties1 = new NonVisualGraphicFrameDrawingProperties();
var graphicFrameLocks1 = new GraphicFrameLocks { NoChangeAspect = true };
graphicFrameLocks1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
nonVisualGraphicFrameDrawingProperties1.AppendChild(graphicFrameLocks1);
var graphic1 = new Graphic();
graphic1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
var graphicData1 = new GraphicData { Uri = "http://schemas.openxmlformats.org/drawingml/2006/picture" };
var picture1 = new Picture();
picture1.AddNamespaceDeclaration("pic", "http://schemas.openxmlformats.org/drawingml/2006/picture");
var nonVisualPictureProperties1 = new NonVisualPictureProperties();
var nonVisualDrawingProperties1 = new NonVisualDrawingProperties
{
Id = 0U,
Name = name,
Description = description
};
var nonVisualPictureDrawingProperties1 = new NonVisualPictureDrawingProperties();
var pictureLocks1 = new PictureLocks { NoChangeAspect = true, NoChangeArrowheads = true };
nonVisualPictureDrawingProperties1.AppendChild(pictureLocks1);
nonVisualPictureProperties1.AppendChild(nonVisualDrawingProperties1);
nonVisualPictureProperties1.AppendChild(nonVisualPictureDrawingProperties1);
var blipFill1 = new BlipFill();
var blip1 = new Blip { Embed = relationshipId };
var blipExtensionList1 = new BlipExtensionList();
var blipExtension1 = new BlipExtension { Uri = "{28A0092B-C50C-407E-A947-70E740481C1C}" };
var useLocalDpi1 = new UseLocalDpi { Val = false };
useLocalDpi1.AddNamespaceDeclaration("a14", "http://schemas.microsoft.com/office/drawing/2010/main");
blipExtension1.AppendChild(useLocalDpi1);
blipExtensionList1.AppendChild(blipExtension1);
blip1.AppendChild(blipExtensionList1);
var sourceRectangle1 = new SourceRectangle();
var stretch1 = new Stretch();
var fillRectangle1 = new FillRectangle();
stretch1.AppendChild(fillRectangle1);
blipFill1.AppendChild(blip1);
blipFill1.AppendChild(sourceRectangle1);
blipFill1.AppendChild(stretch1);
var shapeProperties1 = new ShapeProperties { BlackWhiteMode = BlackWhiteModeValues.Auto };
var transform2D1 = new Transform2D();
var offset1 = new Offset { X = 0L, Y = 0L };
var extents1 = new Extents { Cx = extent1.Cx, Cy = extent1.Cy };
transform2D1.AppendChild(offset1);
transform2D1.AppendChild(extents1);
var presetGeometry1 = new PresetGeometry { Preset = ShapeTypeValues.Rectangle };
var adjustValueList1 = new AdjustValueList();
presetGeometry1.AppendChild(adjustValueList1);
var noFill1 = new NoFill();
var outline1 = new Outline();
var noFill2 = new NoFill();
outline1.AppendChild(noFill2);
shapeProperties1.AppendChild(transform2D1);
shapeProperties1.AppendChild(presetGeometry1);
shapeProperties1.AppendChild(noFill1);
shapeProperties1.AppendChild(outline1);
picture1.AppendChild(nonVisualPictureProperties1);
picture1.AppendChild(blipFill1);
picture1.AppendChild(shapeProperties1);
graphicData1.AppendChild(picture1);
graphic1.AppendChild(graphicData1);
inline1.AppendChild(extent1);
inline1.AppendChild(effectExtent1);
inline1.AppendChild(docProperties1);
inline1.AppendChild(nonVisualGraphicFrameDrawingProperties1);
inline1.AppendChild(graphic1);
drawing1.AppendChild(inline1);
run1.AppendChild(runProperties1);
run1.AppendChild(drawing1);
paragraph1.AppendChild(run1);
return paragraph1;
}
static void Main(string[] args)
{
Student myrecord = new Student {
StudentId = "200430242", FirstName = "BalaPrathima", LastName = "Gade"
};
Student student1 = new Student();
List <string> directories = FTP.GetDirectory(Constants.FTP.BaseUrl);
List <Student> students = new List <Student>();
foreach (var directory in directories)
{
Student student = new Student()
{
AbsoluteUrl = Constants.FTP.BaseUrl
};
student.UID = Guid.NewGuid().ToString();
student.FromDirectory(directory);
if (student.StudentId == "200430242")
{
student.IsMe = true;
}
students.Add(student);
}
HttpWebRequest WebReq = (HttpWebRequest)WebRequest.Create(string.Format("https://jsonplaceholder.typicode.com/users"));
WebReq.Method = "GET";
HttpWebResponse WebResp = (HttpWebResponse)WebReq.GetResponse();
Console.WriteLine(WebResp.StatusCode);
Console.WriteLine(WebResp.Server);
string jsonString;
using (Stream stream = WebResp.GetResponseStream()) //modified from your code since the using statement disposes the stream automatically when done
{
StreamReader reader = new StreamReader(stream, System.Text.Encoding.UTF8);
jsonString = reader.ReadToEnd();
}
List <Model.Users> users = JsonConvert.DeserializeObject <List <Model.Users> >(jsonString);
Console.WriteLine(users.Count());
Console.WriteLine(jsonString);
/*-----------------------WORD DOCUMENT-------------------------------------- */
string docxFilePath = $"{Constants.Locations.DataFolder}//info.docx";
//string ftpImagePath = Constants.FTP.BaseUrl + "/200430242 BalaPrathima Gade/myimage.jpg";
string studentsImagePath = $"{Constants.Locations.ImagesFolder}//myimage.jpg";
// Create a document by supplying the filepath.
using (WordprocessingDocument wordDocument =
WordprocessingDocument.Create(docxFilePath, WordprocessingDocumentType.Document))
{
// Add a main document part.
MainDocumentPart mainPart = wordDocument.AddMainDocumentPart();
// Create the document structure and add some text.
mainPart.Document = new Document();
Body body = mainPart.Document.AppendChild(new Body());
ImagePart imagePart = mainPart.AddImagePart(ImagePartType.Jpeg);
Paragraph para = body.AppendChild(new Paragraph());
Run run = para.AppendChild(new Run());
foreach (var user in users)
{
run.AppendChild(new Text("Id:"));
run.AppendChild(new Text(user.Id.ToString()));
run.AppendChild(new Text(" "));
run.AppendChild(new Text("My Name is: "));
run.AppendChild(new Text(user.Name.ToString()));
run.AppendChild(new Text(" "));
run.AppendChild(new Text("My Email is: "));
run.AppendChild(new Text(user.Email.ToString()));
run.AppendChild(new Text(" "));
run.AppendChild(new Break());
using (FileStream stream = new FileStream(studentsImagePath, FileMode.Open))
{
imagePart.FeedData(stream);
}
Word.AddImageToBody(wordDocument, mainPart.GetIdOfPart(imagePart));
run.AppendChild(new Break()
{
Type = BreakValues.Page
});
}
}
/*-----------------------------EXCEL DOCUMENT-------------------------------------------*/
string xlsxFilePath = $"{Constants.Locations.DataFolder}//info.xlsx";
// Create a spreadsheet document by supplying the filepath.
// By default, AutoSave = true, Editable = true, and Type = xlsx.
SpreadsheetDocument spreadsheetDocument = SpreadsheetDocument.Create(xlsxFilePath, SpreadsheetDocumentType.Workbook);
//Creating Excel Document Structure//
// Add a WorkbookPart to the document.
WorkbookPart workbookpart = spreadsheetDocument.AddWorkbookPart();
workbookpart.Workbook = new Workbook();
// Add a WorksheetPart to the WorkbookPart.
WorksheetPart worksheetPart = workbookpart.AddNewPart <WorksheetPart>();
worksheetPart.Worksheet = new Worksheet(new SheetData());
// Add Sheets to the Workbook.
Sheets sheets = spreadsheetDocument.WorkbookPart.Workbook.AppendChild <Sheets>(new Sheets());
SharedStringTablePart shareStringPart;
shareStringPart = spreadsheetDocument.WorkbookPart.AddNewPart <SharedStringTablePart>();
WorksheetPart worksheetPart2 = workbookpart.AddNewPart <WorksheetPart>();
worksheetPart2.Worksheet = new Worksheet(new SheetData());
Sheet sheet = new Sheet()
{
Id = spreadsheetDocument.WorkbookPart.GetIdOfPart(worksheetPart2),
SheetId = 1,
Name = "studentdata"
};
sheets.Append(sheet);
//Creating Heading Row
string[] headingRow = { "UID", "StudentID", "FirstName", "LastName", "DateofBirth", "IsMe", "Age" };
char headingIndex = 'A';
for (int i = 0; i < headingRow.Count(); i++)
{
Excel.InsertCellInWorksheet(headingIndex.ToString(), 1, worksheetPart2).CellValue = new CellValue(Excel.InsertSharedStringItem(headingRow[i], shareStringPart).ToString());
Excel.InsertCellInWorksheet(headingIndex.ToString(), 1, worksheetPart2).DataType = new EnumValue <CellValues>(CellValues.SharedString);
headingIndex++;
}
//Processing student Data
uint rowIndex = 2;
foreach (var student in students)
{
char columnIndex = 'A';
int uidIndex = Excel.InsertSharedStringItem(student.UID.ToString(), shareStringPart);
Cell uidCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
uidCell.CellValue = new CellValue(uidIndex.ToString());
uidCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
string ID = student.StudentId;
int studentIdIndex = Excel.InsertSharedStringItem(ID, shareStringPart);
Cell studentCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
studentCell.CellValue = new CellValue(studentIdIndex.ToString());
studentCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
int firstIndex = Excel.InsertSharedStringItem(student.FirstName.ToString(), shareStringPart);
Cell firstCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
firstCell.CellValue = new CellValue(firstIndex.ToString());
firstCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
int Lastindex = Excel.InsertSharedStringItem(student.LastName.ToString(), shareStringPart);
Cell LastCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
LastCell.CellValue = new CellValue(Lastindex.ToString());
LastCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
int DOBIndex = Excel.InsertSharedStringItem(student.DateOfBirthDT.ToShortDateString(), shareStringPart);
Cell DOBCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
DOBCell.CellValue = new CellValue(DOBIndex.ToString());
DOBCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
int IsMeIndex = Excel.InsertSharedStringItem(student.IsMe.ToString(), shareStringPart);
Cell IsMeCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
IsMeCell.CellValue = new CellValue(IsMeIndex.ToString());
IsMeCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
columnIndex++;
int ageIndex = Excel.InsertSharedStringItem(student.Age.ToString(), shareStringPart);
Cell ageCell = Excel.InsertCellInWorksheet(columnIndex.ToString(), rowIndex, worksheetPart2);
ageCell.CellValue = new CellValue(ageIndex.ToString());
ageCell.DataType = new EnumValue <CellValues>(CellValues.SharedString);
rowIndex++;
}
// Save and Close the document.
workbookpart.Workbook.Save();
spreadsheetDocument.Close();
}