/***************************************************/
/**** Private methods ****/
/***************************************************/
private bool CreateCollection(IEnumerable <Bar> bars)
{
if (bars.Count() > 0)
{
int barIdNum = 0;
int lineIdNum = 0;
List <Bar> barList = bars.ToList();
rf.Member[] rfBars = new rf.Member[barList.Count()];
for (int i = 0; i < bars.Count(); i++)
{
barIdNum = GetAdapterId <int>(barList[i]);
//create line
lineIdNum = modelData.GetLineCount() + 1;
rf.Line centreLine = new rf.Line();
int startNodeId = GetAdapterId <int>(barList[i].StartNode);
int endNodeId = GetAdapterId <int>(barList[i].EndNode);
centreLine.NodeList = String.Join(",", new int[] { startNodeId, endNodeId });
centreLine.Type = rf.LineType.PolylineType;
modelData.SetLine(centreLine);
rfBars[i] = barList[i].ToRFEM(barIdNum, lineIdNum);
modelData.SetMember(rfBars[i]);
}
//modelData.SetMembers(rfBars);
}
return(true);
}
/***************************************************/
/**** Private methods ****/
/***************************************************/
private bool CreateCollection(IEnumerable <RigidLink> links)
{
if (links.Count() > 0)
{
int linkIdNum = 0;
int lineIdNum = 0;
List <RigidLink> linkList = links.ToList();
rf.Member[] rfLinks = new rf.Member[linkList.Count()];
for (int i = 0; i < links.Count(); i++)
{
linkIdNum = GetAdapterId <int>(linkList[i]);
//check for multiple secondary nodes
if (linkList[i].SecondaryNodes.Count > 1)
{
Engine.Base.Compute.RecordWarning("Multiple secondary nodes detected! Link no. " + linkIdNum + " was created using only the first secondary node!");
}
//create line
lineIdNum = modelData.GetLineCount() + 1;
rf.Line centreLine = new rf.Line();
int startNodeId = GetAdapterId <int>(linkList[i].PrimaryNode);
int endNodeId = GetAdapterId <int>(linkList[i].SecondaryNodes[0]);
centreLine.NodeList = String.Join(",", new int[] { startNodeId, endNodeId });
centreLine.Type = rf.LineType.PolylineType;
modelData.SetLine(centreLine);
rf.Member rfLink = new rf.Member();
rfLink.No = linkIdNum;
rfLink.LineNo = lineIdNum;
rfLink.Type = rf.MemberType.Rigid;
LinkConstraint lc = linkList[0].Constraint;
if (lc != null)
{
if (lc.XtoX != true || lc.YtoY != true || lc.ZtoZ != true || lc.XXtoXX != true || lc.YYtoYY != true || lc.ZZtoZZ != true)
{
Engine.Base.Compute.RecordWarning("Hinges on RigidLinks are not supported. Member no. " + linkIdNum + " created as fixed!");
}
}
modelData.SetMember(rfLink);
}
//modelData.SetMembers(rfBars);
}
return(true);
}
/***************************************************/
/**** Public Methods ****/
/***************************************************/
public static rf.Member ToRFEM(this Bar bar, int barId, int lineId)
{
rf.Member rfBar = new rf.Member();
rfBar.No = barId;
rfBar.LineNo = lineId;
rfBar.StartCrossSectionNo = bar.SectionProperty.AdapterId <int>(typeof(RFEMId));
rf.Rotation rotation = new rf.Rotation();
rotation.Angle = bar.OrientationAngle;
rotation.Type = rf.RotationType.Angle;
rfBar.Rotation = rotation;
return(rfBar);
}
/***************************************************/
/**** Public Methods ****/
/***************************************************/
public static Bar FromRFEM(this rf.Member member, rf.Line line, ISectionProperty sectionProperty)
{
rf.Point3D sPt = line.ControlPoints.First();
rf.Point3D ePt = line.ControlPoints.Last();
BH.oM.Geometry.Line ln = new oM.Geometry.Line()
{
Start = new oM.Geometry.Point()
{
X = sPt.X, Y = sPt.Y, Z = sPt.Z
}, End = new oM.Geometry.Point()
{
X = ePt.X, Y = ePt.Y, Z = ePt.Z
}
};
Bar bhBar = BH.Engine.Structure.Create.Bar(ln, sectionProperty, member.Rotation.Angle);
bhBar.SetAdapterId(typeof(RFEMId), member.No);
return(bhBar);
}
/***************************************************/
/**** Private methods ****/
/***************************************************/
private List <Bar> ReadBars(List <string> ids = null)
{
List <Bar> barList = new List <Bar>();
rf.Line line;
ISectionProperty sectionProperty;
if (ids == null)
{
foreach (rf.Member member in modelData.GetMembers())
{
if (member.Type == rf.MemberType.Rigid |
member.Type == rf.MemberType.CouplingHingeHinge |
member.Type == rf.MemberType.CouplingHingeRigid |
member.Type == rf.MemberType.CouplingRigidHinge |
member.Type == rf.MemberType.CouplingRigidRigid)
{
continue;
}
line = modelData.GetLine(member.LineNo, rf.ItemAt.AtNo).GetData();
int firstSectionNo = 0;
int secondSectionNo = 0;
if (member.StartCrossSectionNo == 0 & member.EndCrossSectionNo != 0)
{
firstSectionNo = member.EndCrossSectionNo;
}
else
{
firstSectionNo = member.StartCrossSectionNo;
secondSectionNo = member.EndCrossSectionNo;
}
if (firstSectionNo == secondSectionNo)
{
secondSectionNo = 0;
}
sectionProperty = GetSectionProperty(firstSectionNo);
//check for tapered section
if (secondSectionNo != 0)
{
ISectionProperty startSectionProperty = sectionProperty;
ISectionProperty endSectionProperty = GetSectionProperty(secondSectionNo);
sectionProperty = GetTaperedSectionProperty(startSectionProperty, endSectionProperty);
}
barList.Add(member.FromRFEM(line, sectionProperty));
}
}
else
{
foreach (string id in ids)
{
rf.Member member = modelData.GetMember(Int32.Parse(id), rf.ItemAt.AtNo).GetData();
if (member.Type == rf.MemberType.Rigid)
{
continue;
}
line = modelData.GetLine(member.LineNo, rf.ItemAt.AtNo).GetData();
int firstSectionNo = 0;
int secondSectionNo = 0;
if (member.StartCrossSectionNo == 0 & member.EndCrossSectionNo != 0)
{
firstSectionNo = member.EndCrossSectionNo;
}
else
{
firstSectionNo = member.StartCrossSectionNo;
secondSectionNo = member.EndCrossSectionNo;
}
sectionProperty = GetSectionProperty(firstSectionNo);
//check for tapered section
if (secondSectionNo != 0)
{
ISectionProperty startSectionProperty = sectionProperty;
ISectionProperty endSectionProperty = GetSectionProperty(secondSectionNo);
sectionProperty = GetTaperedSectionProperty(startSectionProperty, endSectionProperty);
}
barList.Add(member.FromRFEM(line, sectionProperty));
}
}
return(barList);
}
/***************************************************/
/**** Private methods ****/
/***************************************************/
private List <RigidLink> ReadLinks(List <string> ids = null)
{
List <RigidLink> linkList = new List <RigidLink>();
rf.Line line;
if (ids == null)
{
rf.Member[] allLinks = modelData.GetMembers().Where(x => (x.Type == rf.MemberType.Rigid) |
(x.Type == rf.MemberType.CouplingHingeHinge) |
(x.Type == rf.MemberType.CouplingHingeRigid) |
(x.Type == rf.MemberType.CouplingRigidHinge) |
(x.Type == rf.MemberType.CouplingRigidRigid)).ToArray();
foreach (rf.Member link in allLinks)
{
line = modelData.GetLine(link.LineNo, rf.ItemAt.AtNo).GetData();
rf.Point3D sPt = line.ControlPoints.First();
rf.Point3D ePt = line.ControlPoints.Last();
Node startNode = new Node {
Position = new oM.Geometry.Point()
{
X = sPt.X, Y = sPt.Y, Z = sPt.Z
}
};
Node endNode = new Node {
Position = new oM.Geometry.Point()
{
X = ePt.X, Y = ePt.Y, Z = ePt.Z
}
};
RigidLink bhLink = new RigidLink {
PrimaryNode = startNode, SecondaryNodes = new List <Node> {
endNode
}
};
if (link.StartHingeNo == 0 && link.EndHingeNo == 0)
{
//no hinges set, then all fixed
bhLink.Constraint = Engine.Structure.Create.LinkConstraintFixed();
}
else
{
Engine.Base.Compute.RecordWarning("Hinges on Rigid links are not supported. See member No. " + link.No.ToString());
}
bhLink.SetAdapterId(typeof(RFEMId), link.No);
linkList.Add(bhLink);
}
}
else
{
foreach (string id in ids)
{
rf.Member link = modelData.GetMember(Int32.Parse(id), rf.ItemAt.AtNo).GetData();
if (link.Type != rf.MemberType.Rigid | link.Type != rf.MemberType.CouplingHingeHinge | link.Type != rf.MemberType.CouplingHingeRigid | link.Type != rf.MemberType.CouplingRigidHinge | link.Type != rf.MemberType.CouplingRigidRigid)
{
continue;
}
line = modelData.GetLine(link.LineNo, rf.ItemAt.AtNo).GetData();
rf.Point3D sPt = line.ControlPoints.First();
rf.Point3D ePt = line.ControlPoints.Last();
Node startNode = new Node {
Position = new oM.Geometry.Point()
{
X = sPt.X, Y = sPt.Y, Z = sPt.Z
}
};
Node endNode = new Node {
Position = new oM.Geometry.Point()
{
X = ePt.X, Y = ePt.Y, Z = ePt.Z
}
};
RigidLink bhLink = new RigidLink {
PrimaryNode = startNode, SecondaryNodes = new List <Node> {
endNode
}
};
if (link.StartHingeNo == 0 && link.EndHingeNo == 0)
{
//no hinges set, then all fixed
bhLink.Constraint.XtoX = true;
bhLink.Constraint.YtoY = true;
bhLink.Constraint.ZtoZ = true;
bhLink.Constraint.XXtoXX = true;
bhLink.Constraint.YYtoYY = true;
bhLink.Constraint.ZZtoZZ = true;
}
else
{
Engine.Base.Compute.RecordWarning("Hinges on Rigid links are not supported. See member No. " + link.No.ToString());
}
bhLink.SetAdapterId(typeof(RFEMId), link.No);
linkList.Add(bhLink);
}
}
return(linkList);
}
private List <Dlubal.RFEM5.Member> CreateRfemMembers(List <Dlubal.RFEM5.Line> rfemLineMethodIn, string sectionIdMethodIn, string materialIdMethodIn, Dlubal.RFEM5.MemberHinge rfemHingeStartMethodIn, Dlubal.RFEM5.MemberHinge rfemHingeEndMethodIn, double rotationMethodIn, string commentsListMethodIn)
{
//---- Interface with RFEM, getting available element numbers ----
#region Estabilishing connection with RFEM, getting available element numbers
// Gets interface to running RFEM application.
IApplication app = Marshal.GetActiveObject("RFEM5.Application") as IApplication;
// Locks RFEM licence
app.LockLicense();
// Gets interface to active RFEM model.
IModel model = app.GetActiveModel();
// Gets interface to model data.
IModelData data = model.GetModelData();
// Gets Max node, line , line support numbers
int currentNewMemberNo = data.GetLastObjectNo(ModelObjectType.MemberObject) + 1;
int currentNewSectionNo = data.GetLastObjectNo(ModelObjectType.CrossSectionObject) + 1;
int currentNewMaterialNo = data.GetLastObjectNo(ModelObjectType.MaterialObject) + 1;
int currentNewHingeNo = data.GetLastObjectNo(ModelObjectType.MemberHingeObject) + 1;
#endregion
//---- Defining material, cross section and releases ----
#region Defining material, cross section and releases
//define material
Dlubal.RFEM5.Material material = new Dlubal.RFEM5.Material();
material.No = currentNewMaterialNo;
material.TextID = materialIdMethodIn;
material.ModelType = MaterialModelType.IsotropicLinearElasticType;
//define cross section
CrossSection tempCrossSection = new CrossSection();
tempCrossSection.No = currentNewSectionNo;
tempCrossSection.TextID = sectionIdMethodIn;
tempCrossSection.MaterialNo = currentNewMaterialNo;
//define member hinge numbers
if (rfemHingeStartInput.No != -1)
{
rfemHingeStartInput.No = currentNewHingeNo;
}
if (rfemHingeEndInput.No != -1)
{
rfemHingeEndMethodIn.No = currentNewHingeNo + 1;
}
#endregion
//---- Process all lines and create members on those ----
#region Processing all lines, creating RFEM member objects
for (int i = 0; i < rfemLineMethodIn.Count; i++)
{
//test if line exists
try
{
data.GetLine(rfemLineMethodIn[i].No, ItemAt.AtNo);
}
catch
{
continue;
}
//assign member properties
Dlubal.RFEM5.Member tempMember = new Dlubal.RFEM5.Member();
tempMember.No = currentNewMemberNo;
tempMember.LineNo = rfemLineMethodIn[i].No;
tempMember.EndCrossSectionNo = currentNewSectionNo;
tempMember.StartCrossSectionNo = currentNewSectionNo;
tempMember.TaperShape = TaperShapeType.Linear;
tempMember.Rotation.Type = RotationType.Angle;
tempMember.Rotation.Angle = rotationMethodIn * (Math.PI / 180);
if (rfemHingeStartInput.No != -1)
{
tempMember.StartHingeNo = currentNewHingeNo;
}
if (rfemHingeEndInput.No != -1)
{
tempMember.EndHingeNo = currentNewHingeNo + 1;
}
tempMember.Comment = commentsListMethodIn;
// if -1 is input as section, member is created as rigid, otherwise it is "standard"
if (sectionIdInput == "-1")
{
tempMember.Type = MemberType.Rigid;
}
else if (sectionIdInput == "0")
{
tempMember.Type = MemberType.NullMember;
}
else
{
tempMember.Type = MemberType.Beam;
}
RfemMemberList.Add(tempMember);
currentNewMemberNo++;
}
#endregion
//---- Writing information in RFEM ----
#region Writing info to RFEM
try
{
// modification - set model in modification mode, new information can be written
data.PrepareModification();
//set material, cross section and start&end hinges
if (sectionIdInput != "-1")
{
data.SetMaterial(material);
data.SetCrossSection(tempCrossSection);
}
if (rfemHingeStartInput.No != -1)
{
data.SetMemberHinge(rfemHingeStartInput);
}
if (rfemHingeEndInput.No != -1)
{
data.SetMemberHinge(rfemHingeEndMethodIn);
}
//This version writes members one-by-one because the data.SetNodes() for array appears not to be working
//data.SetMembers(RfemMembers);
foreach (Member currentRfemMember in RfemMemberList)
{
data.SetMember(currentRfemMember);
}
// finish modification - RFEM regenerates the data
data.FinishModification();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "Error - Member Write", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
#endregion
//---- Releases interface to RFEM model -----
#region Releasing interface to RFEM
model = null;
// Unlocks licence and releases interface to RFEM application.
if (app != null)
{
app.UnlockLicense();
app = null;
}
// Cleans Garbage Collector and releases all cached COM interfaces.
System.GC.Collect();
System.GC.WaitForPendingFinalizers();
#endregion
//output 'success' as true and return member list
writeSuccess = true;
return(RfemMemberList);
}
