public Int32 LoadChunkData(byte[] data, Int32 p)
{
int P = p;
DataSize = Midi.readMSB32(data, P); P += 4;
Console.WriteLine("HeaderSize : " + DataSize);
MidiType = Midi.readMSB16(data, P); P += 2;
Tracks = Midi.readMSB16(data, P); P += 2;
Division = Midi.readMSB16(data, P); P += 2;
Console.WriteLine("Midi Format : " + this.MidiType);
Console.WriteLine("Traks : " + this.Tracks);
if ((Division & 0x8000) == 0)
{
Console.WriteLine("Division : " + this.Division);
}
else
{
Smpte_fps = (Int16)(Division >> 8);
Smpte_tpf = (Int16)(Division & 0x00ff);
Console.WriteLine("SMPTE FPS : " + this.Smpte_fps);
Console.WriteLine("SMPTE TPF : " + this.Smpte_tpf);
}
return(DataSize + 4);
}
public byte[] toDJZ20()
{
////文件结构
////*文件开始*//
//u32 FileSize ; //文件大小
//u32 EndTime ; //结束时间
//u32 NoteCount ; //音符数量
//Note* Notes ; //音符数据
//u32 MetaCount ; //控制数量
//Meta* Controls ; //控制数据
////*文件结束*//
////文件字节流按照 高位存高字节 低位存低字节的顺序
////音符结构体 (就是游戏中落下的块)
//typedef struct {
//u32 Time ; //时间 单位 ms , 该音符在什么时间激发
//u8 Line ; //游戏中的轨道：将由编辑器编辑
//u8 Data ; //发音 (就是MIDI事件的发音)
//}Note;
////控制结构体 (就是游戏中落下的块)
//typedef struct {
//u32 Time ; //时间 单位 ms , 在什么时间激发
//u8 Type ; //类型
//u32 Data ; //数据
//}Meta;
EventComparerDJZTime ec = new EventComparerDJZTime();
Events.Sort(ec);
Controls.Sort(ec);
Int32 FileSize = 4 + 4 + 4 + Events.Count * 6 + 4 + Controls.Count * 9;
byte[] data = new byte[FileSize];
int P = 0;
Midi.write32(data, P, (Int32)FileSize); P += 4; //文件大小
Midi.write32(data, P, (Int32)EndTime); P += 4; //结束时间
Midi.write32(data, P, (Int32)Events.Count); P += 4; //音符数量
for (int i = 0; i < Events.Count; i++) //音符数据序列
{
Midi.write32(data, P, (Int32)(((EventDJZ)Events[i]).time)); P += 4;
Midi.write8(data, P, ((EventDJZ)Events[i]).pos); P += 1;
Midi.write8(data, P, ((EventDJZ)Events[i]).note); P += 1;
}
Midi.write32(data, P, (Int32)Controls.Count); P += 4; //控制数量
for (int i = 0; i < Controls.Count; i++) //控制数据序列
{
Midi.write32(data, P, (Int32)(((EventDJZ)Controls[i]).time)); P += 4;
Midi.write8(data, P, ((EventDJZ)Controls[i]).note); P += 1;
Midi.write32(data, P, ((EventDJZ)Controls[i]).metadata); P += 4;
}
return(data);
}
public byte[] toDJZ10()
{
////文件结构
////*文件开始*//
//u32 FileSize ; //文件大小
//u32 BPM ; //歌曲速度 (Beat Per Min 拍/分钟)
//u32 NoteCount ; //音符数量
//Node* Notes ; //音符数据
////*文件结束*//
////文件字节流按照 高位存高字节 低位存低字节的顺序
////音符结构体 (就是游戏中落下的块)
//typedef struct {
//u32 Time ; //时间 单位 ms , 该音符在什么时间激发
//u8 Line ; //游戏中的轨道 ：将由编辑器编辑
//u8 Data ; //发音 (就是MIDI事件的发音)
//}Node;
EventComparerDJZTime ec = new EventComparerDJZTime();
Events.Sort(ec);
Int32 FileSize = 4 + 4 + 4 + Events.Count * 6;
byte[] data = new byte[FileSize];
int P = 0;
Midi.write32(data, P, (Int32)FileSize); P += 4; //文件大小
Midi.write32(data, P, (Int32)BPM); P += 4; //歌曲速度 (Beat Per Min 拍/分钟)
Midi.write32(data, P, (Int32)Events.Count); P += 4; //音符数量
for (int i = 0; i < Events.Count; i++) //音符数据序列
{
Midi.write32(data, P, (Int32)(((EventDJZ)Events[i]).time)); P += 4;
Midi.write8(data, P, ((EventDJZ)Events[i]).pos); P += 1;
Midi.write8(data, P, ((EventDJZ)Events[i]).note); P += 1;
//Console.WriteLine("Note[" + i + "].time = " + (Int32)(((Event)Events[i]).time));
}
return(data);
}
public BMS(Midi mid)
{
midi = mid;
Events = new ArrayList[midi.header.Tracks];
for (int t = 0; t < midi.header.Tracks; t++)
{
Events[t] = new ArrayList();
int position = 0;
for (int i = 0; i < midi.track[t].DeltaTime.Count; i++)
{
int deltatime = Util.stringDigitToInt(((string)midi.track[t].DeltaTime[i]), 0, ((string)midi.track[t].DeltaTime[i]).Length);
position += deltatime;
if (EndPos < position)
{
EndPos = position;
}
if (midi.track[t].Event[i].ToString() == "Note On")
{
string str = (string)midi.track[t].Discription[i];
int c = str.IndexOf("Channel=");
int n = str.IndexOf("Note=");
int v = str.IndexOf("Velocity=");
c = Util.stringDigitToInt(str, c + "Channel=".Length, str.Length);
n = Util.stringDigitToInt(str, n + "Note=".Length, str.Length);
v = Util.stringDigitToInt(str, v + "Velocity=".Length, str.Length);
//Console.WriteLine(" c=" + c + " n=" + n + " v=" + v);
if (v > 0)
{
EventBMS ev = new EventBMS();
ev.time = position;
ev.note = (byte)n;
ev.pos = (byte)n;
ev.track = t;
ev.used = false;
ev.selected = false;
ev.dragged = false;
Events[t].Add(ev);
}
}
if (midi.track[t].Event[i].ToString() == "Meta : Set Tempo")
{
string str = (string)midi.track[t].Discription[i];
int tempo = str.IndexOf("Microseconds/Quarter Note=");
tempo = Util.stringDigitToInt(str, tempo + "Microseconds/Quarter Note=".Length, str.Length);
//Console.WriteLine("tempo="+tempo);
EventBMS ev = new EventBMS();
ev.time = position;
ev.metadata = tempo;
keyBPM.Add(ev);
}
}
}
}
public Int32 LoadChunkData(byte[] data, Int32 p)
{
Int32 P = p;
DataSize = Midi.readMSB32(data, P); P += 4;
Console.WriteLine("TrackSize : " + DataSize);
byte MidiStatus = 0;
while ((P - p) < DataSize + 4)
{
int DataStart = P;
/* delta time */
Int32 val = 0;
Int32[] vlq = Midi.readVLQ(data, P);
P += vlq[0];
val = vlq[1];
String dt = val.ToString();
DeltaTime.Add(dt);
//DeltaTime.
// Console.Write("DeltaTime : ");
// Console.WriteLine(value);
/* events */
byte CurByte = Midi.readMSB8(data, P);
//midi status changed
if (CurByte >= 0x80)
{
MidiStatus = CurByte;
P++;
}
//8x 1000xxxx nn vv 音符关闭 (释放键盘) nn=音符号 vv=速度
if (MidiStatus >= 0x80 && MidiStatus <= 0x8f)
{
Event.Add("Note Off");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"Note=" + Midi.readMSB8(data, P++) + "," +
"Velocity=" + Midi.readMSB8(data, P++)
);
//P+=2;
}
//9x 1001xxxx nn vv 音符打开 (按下键盘) nn=音符号 vv=速度
if (MidiStatus >= 0x90 && MidiStatus <= 0x9f)
{
Event.Add("Note On");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"Note=" + Midi.readMSB8(data, P++) + "," +
"Velocity=" + Midi.readMSB8(data, P++)
);
//P+=2;
}
//Ax 1010xxxx nn vv 触摸键盘以后 nn=音符号 vv=速度
if (MidiStatus >= 0xa0 && MidiStatus <= 0xaf)
{
Event.Add("Polyphone Key Pressure(Aftertouch)");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"Note=" + Midi.readMSB8(data, P++) + "," +
"Velocity=" + Midi.readMSB8(data, P++)
);
//P+=2;
}
//Bx 1011xxxx cc vv 调换控制 cc=控制号 vv=新值
if (MidiStatus >= 0xb0 && MidiStatus <= 0xbf)
{
Event.Add("Control Change");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"Controller Number=" + Midi.readMSB8(data, P++) + "," +
"New Value=" + Midi.readMSB8(data, P++)
);
//P+=2;
}
//Cx 1100xxxx pp 改变程序（片断） pp=新的程序号
if (MidiStatus >= 0xc0 && MidiStatus <= 0xcf)
{
Event.Add("Program Change");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"New Program Number=" + Midi.readMSB8(data, P++)
);
//P+=1;
}
//Dx 1101xxxx cc 在通道后接触 cc=管道号
if (MidiStatus >= 0xd0 && MidiStatus <= 0xdf)
{
Event.Add("Channel Pressure(Aftertouch)");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"cc=" + Midi.readMSB8(data, P++)
);
P += 1;
}
//Ex 1110xxxx bb tt 改变互相咬和的齿轮 (2000H 表明缺省或没有改变)(颤音轮)
// bb=值的低7位(least sig)
// tt=值的高7位 (most sig)
if (MidiStatus >= 0xe0 && MidiStatus <= 0xef)
{
Event.Add("Pitch Wheel Change");
Discription.Add(
"Channel=" + (MidiStatus & 0x0f) + "," +
"Bottom=" + Midi.readMSB8(data, P++) + "," +
"Top=" + Midi.readMSB8(data, P++)
);
//P+=2;
}
//f0 SYSEX events
if (MidiStatus == 0xf0)
{
int len = 0;
vlq = Midi.readVLQ(data, P);
P += vlq[0];
Event.Add("SYSEX : (0xf0)");
Discription.Add("...");
len = vlq[1];
P += len;
}
//F1 MIDI时间代码转换信息
if (MidiStatus == 0xf1)
{
Event.Add("SYSEX : MIDI Time Code");
Discription.Add("");
}
//F2 乐曲位置指针信息
if (MidiStatus == 0xf2)
{
Event.Add("SYSEX : Song Position Pointer");
Discription.Add("...");
P += 2;
}
//F3 乐曲选择信息
if (MidiStatus == 0xf3)
{
Event.Add("SYSEX : Song Select");
Discription.Add("Song=" + Midi.readMSB8(data, P++));
}
//F4 (未定义)
if (MidiStatus == 0xf4)
{
Event.Add("(Undefined) (0xf4)");
Discription.Add("...");
}
//F5 (未定义)
if (MidiStatus == 0xf5)
{
Event.Add("(Undefined) (0xf5)");
Discription.Add("...");
}
//F6 音调调整要求信息
if (MidiStatus == 0xf6)
{
Event.Add("SYSEX : Tune Request");
Discription.Add("");
}
//F7 结束系统专用信息
if (MidiStatus == 0xf7)
{
Event.Add("SYSEX : End of Exclusive");
Discription.Add("");
}
//F8 同步所必须的计时器
if (MidiStatus == 0xf8)
{
Event.Add("SYSEX : Synchronise Timer");
Discription.Add("");
}
//F9 (未定义)
if (MidiStatus == 0xf9)
{
Event.Add("(Undefined) (0xf9)");
Discription.Add("...");
}
//FA 开始当前的队列
if (MidiStatus == 0xfa)
{
Event.Add("SYSEX : Start");
Discription.Add("");
}
//FB 从停止的地方继续一个队列
if (MidiStatus == 0xfb)
{
Event.Add("SYSEX : Continue");
Discription.Add("");
}
//FC 停止一个队列
if (MidiStatus == 0xfc)
{
Event.Add("SYSEX : Stop");
Discription.Add("");
}
//FD (未定义)
if (MidiStatus == 0xfd)
{
Event.Add("(Undefined) (0xfd)");
Discription.Add("...");
}
//FE 联系激活信息
if (MidiStatus == 0xfe)
{
Event.Add("SYSEX : Active Sending");
Discription.Add("");
}
//FF 复位信息
//if(MidiStatus==0xff){}
//ff Meta-Events
if (MidiStatus == 0xff)
{
byte MetaType = Midi.readMSB8(data, P++);
byte[] MetaData;
int len = 0;
vlq = Midi.readVLQ(data, P);
P += vlq[0];
len = vlq[1];
MetaData = new byte[len];
System.Array.Copy(data, P, MetaData, 0, len);
P += len;
//int mp = 0;
String text = "";
switch (MetaType)
{
//00 nn ssss 设定轨道的序号 nn=02 (两字节长度的序号) ssss=序号
case 0x00:
Event.Add("Meta : Set Track Number");
Discription.Add("");
break;
//01 nn tt .. 你需要的所有文本事件 nn=以字节为单位的文本长度 tt=文本字符
case 0x01:
Event.Add("Meta : Text");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//02 nn tt .. 同文本的事件, 但是用于版权信息 nn tt=同文本事件
case 0x02:
Event.Add("Meta : Copyright");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//03 nn tt .. 序列或者轨道名 nn tt=同文本事件
case 0x03:
Event.Add("Meta : Track Name");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//04 nn tt .. 轨道乐器名 nn tt=同文本事件
case 0x04:
Event.Add("Meta : Instrument Name");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//05 nn tt .. 歌词 nn tt=同文本事件
case 0x05:
Event.Add("Meta : Lyric");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//06 nn tt .. 标签 nn tt=同文本事件
case 0x06:
Event.Add("Meta : Label");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//07 nn tt .. 浮点音符 nn tt=同文本事件
case 0x07:
Event.Add("Meta : Float Note");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
//20 01 cc MIDI Channel 前缀
case 0x20:
Event.Add("Meta : MIDI Channel Prefixal");
Discription.Add(MetaData[0].ToString());
break;
//2F 00 这个事件一定在每个轨道的结尾出现
case 0x2f:
Event.Add("Meta : Track End");
Discription.Add("");
break;
//51 03 tttttt 设定拍子 tttttt=微秒/四分音符
case 0x51:
Event.Add("Meta : Set Tempo");
int tempo = Midi.readMSB24(MetaData, 0);
Discription.Add("Microseconds/Quarter Note=" + tempo + "");
break;
//54 05 hh mm ss fr ff SMTPE 偏移量
case 0x54:
Event.Add("Meta : SMTPE Offset");
Discription.Add(
"HH=" + MetaData[0] + "," +
"MM=" + MetaData[1] + "," +
"SS=" + MetaData[2] + "," +
"FR=" + MetaData[3] + "," +
"FF=" + MetaData[4]
);
break;
//58 04 nn dd cc bb 拍子记号 nn=拍子记号分子 dd=拍子记号分母2=四分之一 3=8分拍, 等等. cc=节拍器的节奏 bb=对四分之一音符标注的第32号数字
case 0x58:
Event.Add("Meta : Time Signature");
Discription.Add(
"Numerator=" + MetaData[0] + "," +
"Denominator=" + MetaData[1] + "," +
"Number of Ticks in Metronome Click=" + MetaData[2] + "," +
"Number of 32nd Notes to the Quarternote=" + MetaData[3]
);
break;
//59 02 sf mi 音调符号 sf=升调/降调(-7=7 降调, 0=基准C调,7=7 升调) mi=大调/小调(0=大调, 1=小调)
case 0x59:
Event.Add("Meta : Key Signature");
Discription.Add(
"Sharps or Flats=" + MetaData[0] + "," +
"Major or Minor=" + MetaData[1]
);
break;
//7F xx dd .. 音序器的详细信息 xx=被发送的字节数 dd=数据
case 0x7f:
Event.Add("Meta : Synthesizer Info");
for (int i = 0; i < MetaData.Length; i++)
{
text += ((char)MetaData[i]).ToString();
}
Discription.Add(text);
break;
default:
Event.Add("Meta : " + MetaType.ToString("X2"));
Discription.Add("");
break;
}
}
String st = "";
for (int i = 0; i < P - DataStart; i++)
{
st += (data[DataStart + i]).ToString("X2");
st += " ";
}
HexData.Add(st);
byte[] ddata = new byte[P - DataStart];
Array.Copy(data, DataStart, ddata, 0, P - DataStart);
dData.Add(ddata);
}
//P += DataSize;
return(DataSize + 4);
}
public DJZ(Midi mid, int lineCount)
{
midi = mid;
LineCount = lineCount;
Clock = 0;
Division = (UInt32)midi.header.Division;
Tempo = 500000;
SetTempo(Tempo);
TrackCount = midi.header.Tracks;
Events = new ArrayList[TrackCount];
MidiStatus = new byte[TrackCount];
TrackIndex = new int[TrackCount];
CurClock = new UInt32[TrackCount];
CurTime = new double[TrackCount];
PlayNode = new ArrayList();
Controls = new ArrayList();
Lines = new ArrayList();
LastTime = 0;
for (int i = 0; i < TrackCount; i++)
{
Events[i] = new ArrayList();
MidiStatus[i] = 0;
TrackIndex[i] = 0;
CurClock[i] = 0;
CurTime[i] = 0;
}
Int32 newTempo = -1;
Program = new byte[16];
for (int i = 0; i < Program.Length; i++)
{
Program[i] = 0;
}
while (true)
{
bool end = true;
for (int t = 0; t < TrackCount; t++)
{
while (TrackIndex[t] < midi.track[t].dData.Count)
{
//End of track
end = false;
int p = 0;
byte[] data = (byte[])(midi.track[t].dData[TrackIndex[t]]);
Int32[] vlq = Midi.readVLQ(data, p); p += vlq[0];
Int32 deltatime = vlq[1];
//Track timer is zero
if (CurClock[t] == deltatime)
{
TrackIndex[t]++;
CurClock[t] = 0;
byte state = Midi.readMSB8(data, p);
//midi status changed
if (state >= 0x80)
{
MidiStatus[t] = state;
p += 1;
}
else
{
state = MidiStatus[t];
}
//note on/off
if (state >= 0x80 && state <= 0x9f)
{
EventDJZ ev = new EventDJZ();
ev.time = (UInt32)(CurTime[t] / 1000);
ev.state = MidiStatus[t];
ev.note = Midi.readMSB8(data, p); p += 1;
ev.channel = (byte)(state & 0x0f);
ev.program = Program[ev.channel];
ev.pos = (byte)(ev.note % LineCount);
ev.track = t;
ev.metadata = 0;
ev.fullnote = (int)(Clock / (Division * 4));
ev.used = false;
ev.selected = false;
ev.dragged = false;
ev.DeltaTime = (int)Clock;
ev.velo = Midi.readMSB8(data, p); p += 1;
//Console.WriteLine("Note : " + ev.time + " : " + ev.note + " : " + ev.track);
if (ev.velo != 0 && (state >= 0x90 && state <= 0x9f))
{
Events[t].Add(ev);
}
else//note off
{
setLastNoteOnLength(Events[t], ev);
}
}
//program change
if (state >= 0xc0 && state <= 0xcf)
{
int channel = (byte)(state & 0x0f);
int program = Midi.readMSB8(data, p); p += 1;
Program[channel] = (byte)program;
}
//meta
if (state == 0xff)
{
byte meta = Midi.readMSB8(data, p); p += 1;
vlq = Midi.readVLQ(data, p); p += vlq[0];
//meta tempo change
if (meta == 0x51)
{
EventDJZ ev = new EventDJZ();
ev.time = (UInt32)(CurTime[t] / 1000);
ev.state = MidiStatus[t];
ev.note = EventDJZ.CONTROL_BPM;
ev.pos = 0;
ev.track = 0;
ev.metadata = 0;
ev.fullnote = (int)(Clock / (Division * 4));
ev.used = false;
ev.selected = false;
ev.dragged = false;
ev.DeltaTime = (int)Clock;
newTempo = (Int32)Midi.readMSB24(data, p); p += 3;
SetTempo((UInt32)newTempo);//Tempo changed !
//Console.WriteLine("Tempo Changed : " + newTempo);
ev.metadata = (int)BPM;
ev.BPM1000 = (int)(60000000000 / newTempo);
Controls.Add(ev);
}
}
}
else
{
break;
}
}
CurTime[t] += TickTime;
CurClock[t]++;
}//track end
if (Clock % (Division * 4) == 0)
{
EventDJZ ev = new EventDJZ();
ev.time = (UInt32)(LastTime / 1000);
ev.fullnote = (int)(Clock / (Division * 4));
ev.DeltaTime = (int)Clock;
Lines.Add(ev);
// Util.println("count = " + ev.metadata);
}
LastTime += TickTime;
Clock++;
if (end)
{
break;
}
}
LastTime /= 1000;
Console.WriteLine("LastTime=" + LastTime + "(ms)");
}
