コード例 #1
0
		void RunMednaDisc()
		{
			var disc = new Disc();
			OUT_Disc = disc;

			//create a MednaDisc and give it to the disc for ownership
			var md = new MednaDisc(IN_FromPath);
			disc.DisposableResources.Add(md);

			//"length of disc" for bizhawk's purposes (NOT a robust concept!) is determined by beginning of leadout track
			var m_leadoutTrack = md.TOCTracks[100];
			int nSectors = (int)m_leadoutTrack.lba;

			//make synth param memos
			disc.SynthParams.MednaDisc = md;

			//this is the sole sector synthesizer we'll need
			var synth = new SS_MednaDisc();
			OUT_Disc.SynthProvider = new SimpleSectorSynthProvider() { SS = synth };

			//ADR (q-Mode) is necessarily 0x01 for a RawTOCEntry
			const int kADR = 1;
			const int kUnknownControl = 0;

			//mednafen delivers us what is essentially but not exactly (or completely) a TOCRaw.
			//we need to synth RawTOCEntries from this and then turn it into a proper TOCRaw
			//when coming from mednafen, there are 101 entries.
			//entry[0] is placeholder junk, not to be used
			//entry[100] is the leadout track (A0)
			//A1 and A2 are in the form of FirstRecordedTrackNumber and LastRecordedTrackNumber
			for (int i = 1; i < 101; i++)
			{
				var m_te = md.TOCTracks[i];

				//dont add invalid (absent) items
				if (!m_te.Valid)
					continue;

				var m_ts = new Timestamp((int)m_te.lba + 150); //these are supposed to be absolute timestamps

				var q = new SubchannelQ
				{
					q_status = SubchannelQ.ComputeStatus(kADR, (EControlQ)m_te.control), 
					q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
					q_index = BCD2.FromDecimal(i),
					min = BCD2.FromDecimal(0), //unknown with mednadisc
					sec = BCD2.FromDecimal(0), //unknown with mednadisc
					frame = BCD2.FromDecimal(0), //unknown with mednadisc
					zero = 0, //unknown with mednadisc
					ap_min = BCD2.FromDecimal(m_ts.MIN),
					ap_sec = BCD2.FromDecimal(m_ts.SEC),
					ap_frame = BCD2.FromDecimal(m_ts.FRAC),
					q_crc = 0 //meaningless
				};

				//a special fixup: mednafen's entry 100 is the lead-out track, so change it into the A2 raw toc entry
				if (i == 100)
				{
					q.q_index.BCDValue = 0xA2;
				}

				disc.RawTOCEntries.Add(new RawTOCEntry { QData = q });
			}

			//synth A0 and A1 entries (indicating first and last recorded tracks and also session type)
			var qA0 = new SubchannelQ
			{
				q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
				q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
				q_index = BCD2.FromBCD(0xA0),
				min = BCD2.FromDecimal(0), //unknown with mednadisc
				sec = BCD2.FromDecimal(0), //unknown with mednadisc
				frame = BCD2.FromDecimal(0), //unknown with mednadisc
				zero = 0, //unknown with mednadisc
				ap_min = BCD2.FromDecimal(md.TOC.first_track),
				ap_sec = BCD2.FromDecimal(md.TOC.disc_type),
				ap_frame = BCD2.FromDecimal(0),
				q_crc = 0, //meaningless
			};
			disc.RawTOCEntries.Add(new RawTOCEntry { QData = qA0 });
			var qA1 = new SubchannelQ
			{
				q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
				q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
				q_index = BCD2.FromBCD(0xA1),
				min = BCD2.FromDecimal(0), //unknown with mednadisc
				sec = BCD2.FromDecimal(0), //unknown with mednadisc
				frame = BCD2.FromDecimal(0), //unknown with mednadisc
				zero = 0, //unknown with mednadisc
				ap_min = BCD2.FromDecimal(md.TOC.last_track),
				ap_sec = BCD2.FromDecimal(0),
				ap_frame = BCD2.FromDecimal(0),
				q_crc = 0, //meaningless
			};
			disc.RawTOCEntries.Add(new RawTOCEntry { QData = qA1 });

		}
コード例 #2
0
        void RunMednaDisc()
        {
            var disc = new Disc();

            OUT_Disc = disc;

            //create a MednaDisc and give it to the disc for ownership
            var md = new MednaDisc(IN_FromPath);

            disc.DisposableResources.Add(md);

            //"length of disc" for bizhawk's purposes (NOT a robust concept!) is determined by beginning of leadout track
            var m_leadoutTrack = md.TOCTracks[100];
            int nSectors       = (int)m_leadoutTrack.lba;

            //make synth param memos
            disc.SynthParams.MednaDisc = md;

            //this is the sole sector synthesizer we'll need
            var synth = new SS_MednaDisc();

            OUT_Disc.SynthProvider = new SimpleSectorSynthProvider()
            {
                SS = synth
            };

            //ADR (q-Mode) is necessarily 0x01 for a RawTOCEntry
            const int kADR            = 1;
            const int kUnknownControl = 0;

            //mednafen delivers us what is essentially but not exactly (or completely) a TOCRaw.
            //we need to synth RawTOCEntries from this and then turn it into a proper TOCRaw
            //when coming from mednafen, there are 101 entries.
            //entry[0] is placeholder junk, not to be used
            //entry[100] is the leadout track (A0)
            //A1 and A2 are in the form of FirstRecordedTrackNumber and LastRecordedTrackNumber
            for (int i = 1; i < 101; i++)
            {
                var m_te = md.TOCTracks[i];

                //dont add invalid (absent) items
                if (!m_te.Valid)
                {
                    continue;
                }

                var m_ts = new Timestamp((int)m_te.lba + 150);                 //these are supposed to be absolute timestamps

                var q = new SubchannelQ
                {
                    q_status = SubchannelQ.ComputeStatus(kADR, (EControlQ)m_te.control),
                    q_tno    = BCD2.FromDecimal(0), //unknown with mednadisc
                    q_index  = BCD2.FromDecimal(i),
                    min      = BCD2.FromDecimal(0), //unknown with mednadisc
                    sec      = BCD2.FromDecimal(0), //unknown with mednadisc
                    frame    = BCD2.FromDecimal(0), //unknown with mednadisc
                    zero     = 0,                   //unknown with mednadisc
                    ap_min   = BCD2.FromDecimal(m_ts.MIN),
                    ap_sec   = BCD2.FromDecimal(m_ts.SEC),
                    ap_frame = BCD2.FromDecimal(m_ts.FRAC),
                    q_crc    = 0                  //meaningless
                };

                //a special fixup: mednafen's entry 100 is the lead-out track, so change it into the A2 raw toc entry
                if (i == 100)
                {
                    q.q_index.BCDValue = 0xA2;
                }

                disc.RawTOCEntries.Add(new RawTOCEntry {
                    QData = q
                });
            }

            //synth A0 and A1 entries (indicating first and last recorded tracks and also session type)
            var qA0 = new SubchannelQ
            {
                q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
                q_tno    = BCD2.FromDecimal(0), //unknown with mednadisc
                q_index  = BCD2.FromBCD(0xA0),
                min      = BCD2.FromDecimal(0), //unknown with mednadisc
                sec      = BCD2.FromDecimal(0), //unknown with mednadisc
                frame    = BCD2.FromDecimal(0), //unknown with mednadisc
                zero     = 0,                   //unknown with mednadisc
                ap_min   = BCD2.FromDecimal(md.TOC.first_track),
                ap_sec   = BCD2.FromDecimal(md.TOC.disc_type),
                ap_frame = BCD2.FromDecimal(0),
                q_crc    = 0,              //meaningless
            };

            disc.RawTOCEntries.Add(new RawTOCEntry {
                QData = qA0
            });
            var qA1 = new SubchannelQ
            {
                q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
                q_tno    = BCD2.FromDecimal(0), //unknown with mednadisc
                q_index  = BCD2.FromBCD(0xA1),
                min      = BCD2.FromDecimal(0), //unknown with mednadisc
                sec      = BCD2.FromDecimal(0), //unknown with mednadisc
                frame    = BCD2.FromDecimal(0), //unknown with mednadisc
                zero     = 0,                   //unknown with mednadisc
                ap_min   = BCD2.FromDecimal(md.TOC.last_track),
                ap_sec   = BCD2.FromDecimal(0),
                ap_frame = BCD2.FromDecimal(0),
                q_crc    = 0,              //meaningless
            };

            disc.RawTOCEntries.Add(new RawTOCEntry {
                QData = qA1
            });
        }