private bool M_Rightstart; //中间变量
private bool Double_Hands_Start(int timeinterval_ms = 500, bool RST_Start = false)
{
if (RST_Start)
{
M_leftstart = false;
m_LeftTimer.Stop();
m_LeftTimer.Reset();
M_Rightstart = false;
m_RightTimer.Stop();
m_RightTimer.Reset();
return(false);
}
else
{
//left
//if (LeftStart.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.左手启动) == 1) && PVar.AutoRunFlag && PVar.IsSysEmcStop == false && Gg.GetDi(0, Gg.InPutMMS0.安全光幕) == 0)//这里需要加很多条件
if (LeftStart.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.左手启动) == 1) && PVar.AutoRunFlag && PVar.IsSysEmcStop == false)//这里需要加很多条件
{
m_LeftTimer.Reset();
m_LeftTimer.Start();
}
if (m_LeftTimer.ElapsedMilliseconds < timeinterval_ms && m_LeftTimer.ElapsedMilliseconds > 0 && AutoRunstep <= 20)
{
M_leftstart = true;
}
else if (m_LeftTimer.ElapsedMilliseconds > timeinterval_ms)
{
M_leftstart = false;
m_LeftTimer.Stop();
m_LeftTimer.Reset();
}
//right
//if (RightStart.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.右手启动) == 1) && PVar.AutoRunFlag && PVar.IsSysEmcStop == false && Gg.GetDi(0, Gg.InPutMMS0.安全光幕) == 0)//这里需要加很多条件
if (RightStart.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.右手启动) == 1) && PVar.AutoRunFlag && PVar.IsSysEmcStop == false && AutoRunstep <= 20)//这里需要加很多条件
{
m_RightTimer.Reset();
m_RightTimer.Start();
}
if (m_RightTimer.ElapsedMilliseconds < timeinterval_ms && m_RightTimer.ElapsedMilliseconds > 0)
{
M_Rightstart = true;
}
else if (m_RightTimer.ElapsedMilliseconds > timeinterval_ms)
{
M_Rightstart = false;
m_RightTimer.Stop();
m_RightTimer.Reset();
}
return(M_leftstart && M_Rightstart);
}
}
private void Btn_Start_Click(object sender, EventArgs e)
{
this.Btn_Start.BackColor = Mycolor.UnselectedBtn;;
this.Btn_Pause.BackColor = Mycolor.None;
this.Btn_Stop.BackColor = Mycolor.None;
if (GoHome.Instance.Reset.Result)
{
if (MessageBox.Show("确定开始自动运行？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Warning) == DialogResult.OK)
{
FileLog.OperateLog("自动运行");
XTaskManager.Instance.FindTaskById((int)TasksId.Manchine).TaskStart(StationRunMode.自动准备);//first run the thread
this.Btn_Start.Enabled = false;
this.Btn_Stop.Enabled = true;
this.Btn_Pause.Enabled = true;
}
}
else
{
if (PVar.AutoRunFlag == false)
{
if (MessageBox.Show("确定开始复位？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Warning) == DialogResult.OK)
{
if (Gg.GetDi(0, Gg.InPutMMS0.紧急停止) == 1)
{
Globals.PostAlarmMachine(XAlarmLevel.STOP, (int)AlarmCode.急停, AlarmCategory.SYSTEM.ToString(), "急停中，复位异常结束！！");
Globals.addList("急停中，复位异常结束！！", Mycolor.ErrorRed);
return;
}
XTaskManager.Instance.FindTaskById((int)TasksId.Manchine).TaskReset();
if (Globals.settingMachineInfo.什么机器 == WhichMachine.MMS)
{
XTaskManager.Instance.FindTaskById((int)TasksId.MMS测试).TaskReset();
}
else
{
XTaskManager.Instance.FindTaskById((int)TasksId.测试).TaskReset();
}
FileLog.OperateLog("初始化");
this.Btn_Start.Enabled = true;
this.Btn_Stop.Enabled = false;
this.Btn_Pause.Enabled = false;
}
}
}
PVar.IsSysEmcStop = false;
}
public static void AutoRun(ref PVar.WorkType StaWork)
{
try
{
switch (StaWork.Step)
{
case 10:
if (PVar.Stop_Flag == false)
{
if (Once == false)
{
if (BVar.FileRorW.ReadINI("Material_index", "是否片料", "有", PVar.PublicParPath) == "有")
{
StaWork.IsHavePianliao = true;
}
else
{
StaWork.IsHavePianliao = false;
}
}
StaWork.State = false;
TimeOut = API.GetTickCount();
//StaWork.Step = 20;
}
break;
case 20:
if (StaWork.State == false && StaWork.Enable)
{
StaWork.State = true;
TimeOut = API.GetTickCount();
StaWork.Step = 30;
}
else
{
if (API.GetTickCount() - TimeOut > 500)
{
TimeOut = API.GetTickCount();
StaWork.Step = 10;
}
}
break;
case 30:
Once = true;
if (StaWork.IsHavePianliao)
{
TimeOut = API.GetTickCount();
StaWork.Step = 10;
}
else
{
TimeOut = API.GetTickCount();
StaWork.Step = 40;
}
break;
case 40:
//判断料仓有无物料
if (Gg.GetDi(0, Gg.InPut0.片料到位检测) == 1)
{
TimeOut = API.GetTickCount();
StaWork.Step = 60;
}
else
{
}
break;
case 60:
Gg.SetExDo(0, 0, Gg.OutPut2.夹上摸气缸, 1);
Gg.SetExDo(0, 0, Gg.OutPut2.撕摸升降气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.片料夹紧气缸左, 1);
Gg.SetExDo(0, 0, Gg.OutPut2.片料夹紧气缸右, 1);
Gg.SetExDo(0, 0, Gg.OutPut2.拉料无杆干气缸, 0);
TimeOut = API.GetTickCount();
StaWork.Step = 70;
break;
case 70:
if (Gg.GetExDi(0, Gg.InPut2.夹上摸气缸伸出) == 1 && Gg.GetExDi(0, Gg.InPut2.夹上摸气缸缩回) == 0 &&
Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 0 &&
Gg.GetExDi(0, Gg.InPut2.片料夹紧气缸左伸出) == 1 && Gg.GetExDi(0, Gg.InPut2.片料夹紧气缸右伸出) == 1 &&
Gg.GetExDi(0, Gg.InPut2.拉料无杆干气缸左) == 1 && Gg.GetExDi(0, Gg.InPut2.拉料无杆干气缸右) == 0)
{
TimeOut = API.GetTickCount();
StaWork.Step = 80;
}
if (API.GetTickCount() - TimeOut > 2000)
{
if (Gg.GetExDi(0, Gg.InPut2.夹上摸气缸伸出) == 0 || Gg.GetExDi(0, Gg.InPut2.夹上摸气缸缩回) == 1)
{
AddList("夹上摸气缸伸出信号异常，请检查！");
ShowList("夹上摸气缸伸出信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 1)
{
AddList("撕摸升降气缸缩回信号异常，请检查！");
ShowList("撕摸升降气缸缩回信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.片料夹紧气缸左伸出) == 0)
{
AddList("片料夹紧气缸左伸出信号异常，请检查！");
ShowList("片料夹紧气缸左伸出信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.片料夹紧气缸右伸出) == 0)
{
AddList("片料夹紧气缸右伸出信号异常，请检查！");
ShowList("片料夹紧气缸右伸出信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.拉料无杆干气缸左) == 0 || Gg.GetExDi(0, Gg.InPut2.拉料无杆干气缸右) == 1)
{
AddList("拉料无杆干气缸左信号异常，请检查！");
ShowList("拉料无杆干气缸左信号异常，请检查！");
}
TimeOut = API.GetTickCount();
BufferStep = 70;
StaWork.Step = 8000;
}
break;
case 80:
//取片料马达和拉料马达回到初始位置
Gg.AbsMotion(0, BVar.S2G_Y, mFunction.Pos.TeachAxis1[3, 0], PVar.ParAxis.Speed[BVar.S2G_Y]);
Gg.AbsMotion(0, BVar.S2L_Z, mFunction.Pos.TeachAxis3[3, 3], PVar.ParAxis.Speed[BVar.S2L_Z]);
TimeOut = API.GetTickCount();
StaWork.Step = 90;
break;
case 90:
if (Gg.ZSPD(0, BVar.S2G_Y) && Gg.ZSPD(0, BVar.S2L_Z))
{
TimeOut = API.GetTickCount();
StaWork.Step = 100;
}
break;
case 100:
Gg.SetExDo(0, 0, Gg.OutPut2.撕摸升降气缸, 1);
TimeOut = API.GetTickCount();
StaWork.Step = 110;
break;
case 110:
if (Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 0 && Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 1)
{
Gg.SetExDo(0, 0, Gg.OutPut2.取底膜破真空, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取片料真空吸, 1);
TimeOut = API.GetTickCount();
StaWork.Step = 120;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("撕摸升降气缸伸出信号异常，请检查！");
TimeOut = API.GetTickCount();
BufferStep = 110;
StaWork.Step = 8000;
}
}
break;
case 120:
if (Gg.GetDi(0, Gg.InPut0.取片料真空检测) == 1)
{
Gg.SetExDo(0, 0, Gg.OutPut2.夹上摸气缸, 0);
TimeOut = API.GetTickCount();
StaWork.Step = 130;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("取片料真空检测信号异常，请检查！");
TimeOut = API.GetTickCount();
BufferStep = 120;
StaWork.Step = 8000;
}
}
break;
case 130:
if (Gg.GetExDi(0, Gg.InPut2.夹上摸气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.夹上摸气缸伸出) == 0)
{
Gg.SetExDo(0, 0, Gg.OutPut2.撕摸升降气缸, 0);
TimeOut = API.GetTickCount();
StaWork.Step = 140;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("夹上摸气缸缩回测信号异常，请检查！");
TimeOut = API.GetTickCount();
BufferStep = 130;
StaWork.Step = 8000;
}
}
break;
case 140:
if (Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 0)
{
Gg.AbsMotion(0, BVar.S2G_Y, mFunction.Pos.TeachAxis1[3, 1], PVar.ParAxis.Speed[BVar.S2G_Y]);
TimeOut = API.GetTickCount();
StaWork.Step = 150;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("撕摸升降气缸缩回信号异常，请检查！");
TimeOut = API.GetTickCount();
BufferStep = 140;
StaWork.Step = 8000;
}
}
break;
case 150:
if (Gg.ZSPD(0, BVar.S2G_Y))
{
Gg.SetExDo(0, 0, Gg.OutPut2.撕摸升降气缸, 1);
TimeOut = API.GetTickCount();
StaWork.Step = 160;
}
break;
case 160:
if (Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 0 && Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 1)
{
Gg.SetExDo(0, 0, Gg.OutPut2.取底膜破真空, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取片料真空吸, 1);
TimeOut = API.GetTickCount();
StaWork.Step = 120;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("撕摸升降气缸伸出信号异常，请检查！");
TimeOut = API.GetTickCount();
BufferStep = 110;
StaWork.Step = 8000;
}
}
break;
case 23320:
TimeOut = API.GetTickCount();
StaWork.Step = 100;
break;
case 800:
StaWork.State = false;
StaWork.Step = 10;
break;
case 1000:
StaWork.Result = false;
StaWork.State = false;
StaWork.Step = 10;
break;
//遇到异常，设备先暂停，确定后处理************************
case 8000:
PVar.IsSystemOnPauseMode = true;
PVar.MacHold = true;
PVar.Stop_Flag = false;
Frm_Main.fMain.Btn_Start.Enabled = false;
Frm_Main.fMain.Btn_Pause.Enabled = true;
Frm_Main.fMain.Btn_Stop.Enabled = false;
Frm_Main.fMain.Btn_Start.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Main.fMain.Btn_Pause.BZ_BackColor = PVar.BZColor_SelectedEndBtn;
Frm_Main.fMain.Btn_Stop.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Engineering.fEngineering.Auto_Timer.Enabled = false;
PVar.LampStatus = 20;
StaWork.Step = BufferStep;
break;
}
}
catch (Exception exc)
{
string Error_Str = "";
string Error_Str1 = "";
Frm_Engineering.fEngineering.MacStop();
MessageBox.Show(exc.Message);
Error_Str = PVar.BZ_LogPath + DateTime.Now.ToString("yyyyMMdd") + "\\" + DateTime.Now.ToString("yyyyMMdd") + "_代码异常记录" + ".txt";
Error_Str1 = "\r\n" + "※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※" + "\r\n" +
"[" + DateTime.Now.ToString("HH:mm:ss") + "]" + "\r\n" + exc.ToString();
FileRw.WriteDattxt(Error_Str, Error_Str1);
}
}
/// <summary>
/// safe door /axis alarm
/// </summary>
private void AlarmReport()
{
#region 急停
Globals.Invoker.SetCtl_BckColor(this.Btn_EMG, Gg.GetDi(0, Gg.InPutMMS0.紧急停止) == 1 ? Mycolor.Red : Color.LimeGreen);
if (EmgSt.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.紧急停止) == 1))
{
EMG();
if (ShowList != null)
{
ShowList("紧急停止按下！");
}
}
EmgSt.Update(Gg.GetDi(0, Gg.InPutMMS0.紧急停止) == 1);
if (EmgSt.PLF)
{
//PVar.LampStatus = 50;
Globals.addList("紧急停止松开！", Mycolor.Red);
}
#endregion
#region 实时扫描 安全门 等
Globals.Invoker.SetCtl_BckColor(this.CurtionSts, Gg.GetDi(0, Gg.InPutMMS0.安全光幕) == 1 ? Mycolor.Red : Color.LimeGreen);
Globals.Invoker.SetCtl_BckColor(this.AirSts, Gg.GetDi(0, Gg.InPutMMS0.正气源感应表) == 1 ? Color.LimeGreen : Mycolor.Red);
if (Globals.settingFunc.打开安全门 && PVar.Stop_Flag == false && PVar.MacHold == false && PVar.AutoRunFlag)
{
string tempStr = "";
string tempStr1 = "";
if (Gg.GetDi(0, Gg.InPutMMS0.后安全门感应器) == 0)
{
tempStr = "后安全门";
}
if (Gg.GetDi(0, Gg.InPutMMS0.左安全门感应器) == 0)
{
tempStr = "左安全门";
}
if (Gg.GetDi(0, Gg.InPutMMS0.右安全门感应器) == 0)
{
tempStr = "右安全门";
}
if (!string.IsNullOrEmpty(tempStr))
{
PVar.MacHold = true;
PVar.Stop_Flag = false;
if (ShowList != null)
{
ShowList("请关闭" + tempStr);
}
if (PauseClick != null)
{
PauseClick(true);
}
PVar.LampStatus = 20;
}
if (CurtionLDPF.Bool_LDP(Gg.GetDi(0, Gg.InPutMMS0.安全光幕) == 1))
{
tempStr1 = "光栅触发！";
}
if (!string.IsNullOrEmpty(tempStr1))
{
PVar.MacHold = true;
PVar.Stop_Flag = false;
Globals.addList(tempStr1, Mycolor.ErrorRed);
if (ShowList != null)
{
ShowList(tempStr1);
}
if (PauseClick != null)
{
PauseClick(true);
}
PVar.LampStatus = 20;
}
//this.SafeDoorSts.Checked = string.IsNullOrEmpty(tempStr);
this.CurtionSts.BackColor = string.IsNullOrEmpty(tempStr1) ? Mycolor.LimeGreen : Color.Red;
this.AirSts.BackColor = (Gg.GetDi(0, Gg.InPutMMS0.正气源感应表) == 1) ? Mycolor.LimeGreen : Color.Red;
}
#endregion
#region 轴报警
if (Gg.Get_AlarmDi(0, Gg.InAlarmMMS0.测试Y轴) == 1)
{
Globals.PostAlarmMachine(XAlarmLevel.STOP, (int)AlarmCode.Y伺服电机驱动器报警, AlarmCategory.SYSTEM.ToString(), "Y伺服电机驱动器报警");
}
if (Gg.GetLimitDi_F(0, (short)Gg.InAlarmMMS0.测试Y轴) == 1 && GoHome.Instance.Reset.Result)
{
Globals.PostAlarmMachine(XAlarmLevel.STOP, (int)AlarmCode.Y伺服电机驱动器报警, AlarmCategory.SYSTEM.ToString(), "Y伺服电机负极限报警");
}
if (Gg.GetLimitDi_Z(0, (short)Gg.InAlarmMMS0.测试Y轴) == 1 && GoHome.Instance.Reset.Result)
{
Globals.PostAlarmMachine(XAlarmLevel.STOP, (int)AlarmCode.Y伺服电机驱动器报警, AlarmCategory.SYSTEM.ToString(), "Y伺服电机正极限报警");
}
#endregion
}
public void HomeSub()
{
switch (StepHome)
{
case 10:
Reset.State = true;
AddList("设备初始化开始，请等待！");
Gg.SetDo(0, Gg.OutPut0.载具真空吸1, 0);
Gg.SetDo(0, Gg.OutPut0.载具真空吸2, 0);
Gg.SetDo(0, Gg.OutPut0.载具真空吸3, 0);
Gg.SetDo(0, Gg.OutPut0.载具真空吸4, 0);
Gg.SetDo(0, Gg.OutPut0.载具破真空1, 0);
Gg.SetDo(0, Gg.OutPut0.载具破真空2, 0);
Gg.SetDo(0, Gg.OutPut0.载具破真空3, 0);
Gg.SetDo(0, Gg.OutPut0.载具破真空4, 0);
Gg.SetDo(0, Gg.OutPut0.保压站刹车继电器, 0);
Gg.SetDo(0, Gg.OutPut0.警示蜂鸣器, 0);
Gg.SetDo(0, Gg.OutPut0.装配站刹车继电器, 0);
Gg.SetDo(0, Gg.OutPut1.取料吸嘴破真空, 0);
Gg.SetDo(0, Gg.OutPut1.取料吸嘴真空吸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.NG蜂鸣器, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.NG指示灯, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.OK指示灯, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.保压升降气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.除底摸平移气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.除底膜吸嘴气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.检气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.拉料无杆干气缸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.片料夹紧气缸右, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.片料夹紧气缸左, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取底膜破真空, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取底膜真空吸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取片料破真空, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.取片料真空吸, 0);
Gg.SetExDo(0, 0, Gg.OutPut2.撕摸升降气缸, 0);
////界面
Frm_Main.fMain.Btn_Stop.Enabled = false;
Frm_Main.fMain.Btn_Pause.Enabled = false;
Frm_Main.fMain.Btn_Stop.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Main.fMain.Btn_Pause.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_ProgressBar.IsShowProgresBar(true);
InitTimeOut = API.GetTickCount();
StepHome = 20;
break;
case 20:
Frm_ProgressBar.SetValueProgressBar(10); //初始化进度条的进度更新显示
if (Gg.GetDi(0, Gg.InPut0.载具真空检测1) == 0 && Gg.GetDi(0, Gg.InPut0.载具真空检测2) == 0 &&
Gg.GetDi(0, Gg.InPut0.载具真空检测3) == 0 && Gg.GetDi(0, Gg.InPut0.载具真空检测4) == 0 &&
Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 0
//&& Gg.GetExDi(0, Gg.InPut2.复检气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.复检气缸伸出) == 0
&& Gg.GetExDi(0, Gg.InPut2.保压升降气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.保压升降气缸伸出) == 0 &&
Gg.GetExDi(0, Gg.InPut2.除底摸平移气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.除底摸平移气缸伸出) == 0 &&
Gg.GetExDi(0, Gg.InPut2.除底膜吸嘴气缸缩回) == 1 && Gg.GetExDi(0, Gg.InPut2.除底膜吸嘴气缸伸出) == 0)
{
InitTimeOut = API.GetTickCount();
StepHome = 30;
}
if (API.GetTickCount() - InitTimeOut > 2000)
{
if (Gg.GetDi(0, Gg.InPut0.载具真空检测1) == 1)
{
AddList("1#载具真空检测1异常，请检查！");
ShowList("1#载具真空检测1异常，请检查！");
}
if (Gg.GetDi(0, Gg.InPut0.载具真空检测2) == 1)
{
AddList("2#载具真空检测2异常，请检查！");
ShowList("2#载具真空检测2异常，请检查！");
}
if (Gg.GetDi(0, Gg.InPut0.载具真空检测3) == 1)
{
AddList("3#载具真空检测3异常，请检查！");
ShowList("3#载具真空检测3异常，请检查！");
}
if (Gg.GetDi(0, Gg.InPut0.载具真空检测4) == 1)
{
AddList("4#载具真空检测3异常，请检查！");
ShowList("4#载具真空检测3异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.撕摸升降气缸伸出) == 1)
{
AddList("撕摸升降气缸缩回信号异常，请检查！");
ShowList("撕摸升降气缸缩回信号异常，请检查！");
}
//if (Gg.GetExDi(0, Gg.InPut2.复检气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.复检气缸伸出) == 1)
// {
// AddList("复检气缸缩回信号异常，请检查！");
// ShowList("复检气缸缩回信号异常，请检查！");
// }
if (Gg.GetExDi(0, Gg.InPut2.保压升降气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.保压升降气缸伸出) == 1)
{
AddList("保压升降气缸缩回信号异常，请检查！");
ShowList("保压升降气缸缩回信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.除底摸平移气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.除底摸平移气缸伸出) == 1)
{
AddList("除底摸平移气缸缩回信号异常，请检查！");
ShowList("除底摸平移气缸缩回信号异常，请检查！");
}
if (Gg.GetExDi(0, Gg.InPut2.除底膜吸嘴气缸缩回) == 0 || Gg.GetExDi(0, Gg.InPut2.除底膜吸嘴气缸伸出) == 1)
{
AddList("除底膜吸嘴气缸缩回信号异常，请检查！");
ShowList("除底膜吸嘴气缸缩回信号异常，请检查！");
}
StepHome = 1000;
}
break;
case 30:
AddList("组装Z轴开始回原点…");
AddList("保压Z轴开始回原点…");
GoHome.Instance.AxisHome[0, 3].Result = false;
GoHome.Instance.AxisHome[0, 8].Result = false;
GoHome.Instance.AxisHome[0, 3].Enable = true;
GoHome.Instance.AxisHome[0, 8].Enable = true;
GoHome.Instance.AxisHome[0, 3].Step = 10;
GoHome.Instance.AxisHome[0, 8].Step = 10;
InitTimeOut = API.GetTickCount();
Frm_ProgressBar.SetValueProgressBar(30);
StepHome = 40;
break;
case 40:
GotoHome(0, 3, 20, -1000, 10, 1, 10);
GotoHome(0, 8, 20, -1000, 10, 1, 10);
if (GoHome.Instance.AxisHome[0, 3].Step == 0 && GoHome.Instance.AxisHome[0, 3].Enable)
{
GoHome.Instance.AxisHome[0, 3].Enable = false;
if (GoHome.Instance.AxisHome[0, 3].Result)
{
AddList("组装Z轴回原点成功！");
}
else
{
AddList("组装Z轴回原点失败！");
ShowList("组装Z轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 8].Step == 0 && GoHome.Instance.AxisHome[0, 8].Enable)
{
GoHome.Instance.AxisHome[0, 8].Enable = false;
if (GoHome.Instance.AxisHome[0, 8].Result)
{
AddList("保压Z轴回原点成功！");
}
else
{
AddList("保压Z轴回原点失败！");
ShowList("保压Z轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 3].Result && GoHome.Instance.AxisHome[0, 8].Result)
{
Frm_ProgressBar.SetValueProgressBar(50);
InitTimeOut = API.GetTickCount();
StepHome = 50;
}
break;
case 50:
AddList("组装X轴开始回原点…");
AddList("组装Y轴开始回原点…");
AddList("组装R轴开始回原点…");
GoHome.Instance.AxisHome[0, 1].Result = false;
GoHome.Instance.AxisHome[0, 2].Result = false;
GoHome.Instance.AxisHome[0, 4].Result = false;
GoHome.Instance.AxisHome[0, 1].Enable = true;
GoHome.Instance.AxisHome[0, 2].Enable = true;
GoHome.Instance.AxisHome[0, 4].Enable = true;
GoHome.Instance.AxisHome[0, 1].Step = 10;
GoHome.Instance.AxisHome[0, 2].Step = 10;
GoHome.Instance.AxisHome[0, 4].Step = 10;
InitTimeOut = API.GetTickCount();
StepHome = 60;
break;
case 60:
GotoHome(0, 1, 20, -1000, 10, 1, 10);
GotoHome(0, 2, 20, -1000, 10, 1, 10);
GotoHome(0, 4, 20, -1000, 10, 1, 10);
if (GoHome.Instance.AxisHome[0, 1].Step == 0 && GoHome.Instance.AxisHome[0, 1].Enable)
{
GoHome.Instance.AxisHome[0, 1].Enable = false;
if (GoHome.Instance.AxisHome[0, 1].Result)
{
AddList("组装X轴回原点成功！");
}
else
{
AddList("组装X轴回原点失败！");
ShowList("组装X轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 2].Step == 0 && GoHome.Instance.AxisHome[0, 2].Enable)
{
GoHome.Instance.AxisHome[0, 2].Enable = false;
if (GoHome.Instance.AxisHome[0, 2].Result)
{
AddList("组装Y轴回原点成功！");
}
else
{
AddList("组装Y轴回原点失败！");
ShowList("组装Y轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 4].Step == 0 && GoHome.Instance.AxisHome[0, 4].Enable)
{
GoHome.Instance.AxisHome[0, 4].Enable = false;
if (GoHome.Instance.AxisHome[0, 4].Result)
{
AddList("组装R轴回原点成功！");
}
else
{
AddList("组装R轴回原点失败！");
ShowList("组装R轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 1].Result && GoHome.Instance.AxisHome[0, 2].Result && GoHome.Instance.AxisHome[0, 4].Result)
{
Frm_ProgressBar.SetValueProgressBar(70);
InitTimeOut = API.GetTickCount();
StepHome = 70;
}
break;
case 70:
AddList("上料Z轴开始回原点…");
AddList("平移Y轴开始回原点…");
AddList("拉料Z轴开始回原点…");
GoHome.Instance.AxisHome[0, 5].Result = false;
GoHome.Instance.AxisHome[0, 6].Result = false;
GoHome.Instance.AxisHome[0, 7].Result = false;
GoHome.Instance.AxisHome[0, 5].Enable = true;
GoHome.Instance.AxisHome[0, 6].Enable = true;
GoHome.Instance.AxisHome[0, 7].Enable = true;
GoHome.Instance.AxisHome[0, 5].Step = 10;
GoHome.Instance.AxisHome[0, 6].Step = 10;
GoHome.Instance.AxisHome[0, 7].Step = 10;
InitTimeOut = API.GetTickCount();
StepHome = 80;
break;
case 80:
GotoHome(0, 5, 20, -1000, 10, 1, 10);
GotoHome(0, 6, 20, -1000, 10, 1, 30);
GotoHome(0, 7, 20, -1000, 10, 1, 10);
if (GoHome.Instance.AxisHome[0, 5].Step == 0 && GoHome.Instance.AxisHome[0, 5].Enable)
{
GoHome.Instance.AxisHome[0, 5].Enable = false;
if (GoHome.Instance.AxisHome[0, 5].Result)
{
AddList("上料Z轴回原点成功！");
}
else
{
AddList("上料Z轴回原点失败！");
ShowList("上料Z轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 6].Step == 0 && GoHome.Instance.AxisHome[0, 6].Enable)
{
GoHome.Instance.AxisHome[0, 6].Enable = false;
if (GoHome.Instance.AxisHome[0, 6].Result)
{
AddList("平移Y轴回原点成功！");
}
else
{
AddList("平移Y轴回原点失败！");
ShowList("平移Y轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 7].Step == 0 && GoHome.Instance.AxisHome[0, 7].Enable)
{
GoHome.Instance.AxisHome[0, 7].Enable = false;
if (GoHome.Instance.AxisHome[0, 7].Result)
{
AddList("拉料Z轴回原点成功！");
}
else
{
AddList("拉料Z轴回原点失败！");
ShowList("拉料Z轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[0, 5].Result && GoHome.Instance.AxisHome[0, 6].Result && GoHome.Instance.AxisHome[0, 7].Result)
{
Frm_ProgressBar.SetValueProgressBar(80);
InitTimeOut = API.GetTickCount();
StepHome = 90;
}
break;
case 90:
AddList("转盘R轴开始回原点…");
GoHome.Instance.AxisHome[1, 2].Result = false;
GoHome.Instance.AxisHome[1, 1].Enable = true;
GoHome.Instance.AxisHome[1, 1].Step = 10;
InitTimeOut = API.GetTickCount();
StepHome = 100;
break;
case 100:
GotoHome(1, 1, 30, -360, 5, mFunction.Pos.TeachAxis1[2, 0], 30);
if (GoHome.Instance.AxisHome[1, 1].Step == 0 && GoHome.Instance.AxisHome[1, 1].Enable)
{
GoHome.Instance.AxisHome[1, 1].Enable = false;
if (GoHome.Instance.AxisHome[1, 1].Result)
{
AddList("转盘R轴回原点成功！");
}
else
{
AddList("转盘R轴回原点失败！");
ShowList("转盘R轴回原点失败！");
StepHome = 1000;
}
}
if (GoHome.Instance.AxisHome[1, 1].Result)
{
Frm_ProgressBar.SetValueProgressBar(90);
InitTimeOut = API.GetTickCount();
StepHome = 150;
}
break;
case 150:
AddList("各轴开始回待机位置…");
//组装站
Gg.AbsMotion(0, 1, mFunction.Pos.TeachAxis1[0, 0], 20);
Gg.AbsMotion(0, 2, mFunction.Pos.TeachAxis2[0, 0], 20);
Gg.AbsMotion(0, 3, mFunction.Pos.TeachAxis3[0, 0], 20);
Gg.AbsMotion(0, 4, mFunction.Pos.TeachAxis4[0, 0], 20);
//保压站
Gg.AbsMotion(0, 8, mFunction.Pos.TeachAxis1[1, 0], 20); //保压初始位置
Tools.AxisTmplPos[1, 1] = 0;
//供料
Gg.AbsMotion(0, 5, mFunction.Pos.TeachAxis2[3, 4], 50); //供料起始位置
Gg.AbsMotion(0, 6, mFunction.Pos.TeachAxis1[3, 6], 100); //避让位置
Gg.AbsMotion(0, 7, mFunction.Pos.TeachAxis3[3, 7], 50); //换料位置
InitTimeOut = API.GetTickCount();
StepHome = 160;
break;
case 160:
if (Gg.ZSPD(0, 1) && Gg.ZSPD(0, 2) && Gg.ZSPD(0, 3) && Gg.ZSPD(0, 4) && Gg.ZSPD(0, 5) && Gg.ZSPD(0, 6) && Gg.ZSPD(0, 7) && Gg.ZSPD(0, 8) && Gg.ZSPD(1, 1))
{
AddList("各轴回待机位置完成！");
InitTimeOut = API.GetTickCount();
StepHome = 170;
}
else
{
if ((API.GetTickCount() - InitTimeOut) > 10000)
{
if (Gg.ZSPD(0, 1) == false)
{
AddList("组装X轴回待机位置失败！");
ShowList("组装X轴回待机位置失败！");
}
if (Gg.ZSPD(0, 2) == false)
{
AddList("组装Y轴回待机位置失败！");
ShowList("组装Y轴回待机位置失败！");
}
if (Gg.ZSPD(0, 3) == false)
{
AddList("组装Z轴回待机位置失败！");
ShowList("组装Z轴回待机位置失败！");
}
if (Gg.ZSPD(0, 4) == false)
{
AddList("组装R轴回待机位置失败！");
ShowList("组装R轴回待机位置失败！");
}
if (Gg.ZSPD(0, 5) == false)
{
AddList("上料Z轴回待机位置失败！");
ShowList("上料Z轴回待机位置失败！");
}
if (Gg.ZSPD(0, 6) == false)
{
AddList("平移Y轴回待机位置失败！");
ShowList("平移Y轴回待机位置失败！");
}
if (Gg.ZSPD(0, 7) == false)
{
AddList("拉料Z轴回待机位置失败！");
ShowList("拉料Z轴回待机位置失败！");
}
if (Gg.ZSPD(0, 8) == false)
{
AddList("保压Z轴回待机位置失败！");
ShowList("保压Z轴回待机位置失败！");
}
if (Gg.ZSPD(1, 1) == false)
{
AddList("转盘R轴回待机位置失败！");
ShowList("转盘R轴回待机位置失败！");
}
StepHome = 1000;
}
}
break;
case 170:
if (API.GetTickCount() - InitTimeOut > 500)
{
//gts.GT_SetPrfPos(1, 1, 0); //规划器置零
//gts.GT_SetEncPos(1, 1, 0); //编码器置零
//gts.GT_SynchAxisPos(1, 1 << 0); //将当前轴进行位置同步
InitTimeOut = API.GetTickCount();
StepHome = 800;
}
break;
case 800:
AddList("初始化完成");
ShowList("初始化完成");
PVar.LampStatus = 20;
PVar.Stop_Flag = true;
PVar.AutoRunFlag = false;
PVar.MacHold = false;
PVar.CPKDoneCounts = 0;
PVar.WorkMode = 0;
Frm_Main.fMain.Panel_CPK.Visible = false;
Frm_Engineering.fEngineering.Btn_SelectMaterial.Enabled = true;
//按钮初始化
Frm_Main.fMain.Btn_Start.Enabled = true;
Frm_Main.fMain.Btn_Pause.Enabled = false;
Frm_Main.fMain.Btn_Stop.Enabled = true;
Frm_Main.fMain.Btn_Start.BZ_BackColor = PVar.BZColor_SelectedBtn; //'主页面初始化和自动运行按钮
Frm_Main.fMain.Btn_Pause.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Main.fMain.Btn_Stop.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Engineering.fEngineering.TabPage3.Parent = Frm_Engineering.fEngineering.TabControl1;
Frm_Engineering.fEngineering.TabPage4.Parent = Frm_Engineering.fEngineering.TabControl1;
Frm_ProgressBar.IsShowProgresBar(false); //'初始化进度条显示
Frm_Engineering.fEngineering.Home_Timer.Enabled = false;
for (int i = 0; i <= 4; i++)
{
PVar.Sta_Work[i].State = false;
PVar.Sta_Work[i].Result = false;
PVar.Sta_Work[i].IsHaveHSG = false;
PVar.Sta_Work[i].Step = 0;
}
Mod_ErrorCode.CheckSystemTimeStep = 0;
GoHome.Instance.Reset.State = false;
GoHome.Instance.Reset.Result = true;
StepHome = 0;
break;
case 1000:
PVar.LampStatus = 10;
PVar.MacHold = false;
PVar.Stop_Flag = true;
Frm_Engineering.fEngineering.Btn_SelectMaterial.Enabled = false;
//按钮初始化
Frm_Main.fMain.Btn_Start.Enabled = true;
Frm_Main.fMain.Btn_Pause.Enabled = false;
Frm_Main.fMain.Btn_Stop.Enabled = false;
Frm_Main.fMain.Btn_Start.BZ_BackColor = PVar.BZColor_UnselectedBtn; //主页面初始化和自动运行按钮
Frm_Main.fMain.Btn_Pause.BZ_BackColor = PVar.BZColor_UnselectedBtn;
Frm_Main.fMain.Btn_Stop.BZ_BackColor = PVar.BZColor_SelectedEndBtn;
Frm_Engineering.fEngineering.Home_Timer.Enabled = false;
Frm_ProgressBar.IsShowProgresBar(false); //初始化进度条显示
GoHome.Instance.Reset.Result = false;
GoHome.Instance.Reset.State = false;
StepHome = 0;
break;
}
}
public static void AutoRun(ref PVar.WorkType StaWork)
{
try
{
switch (StaWork.Step)
{
case 10:
if (PVar.Stop_Flag == false)
{
PVar.Sta_Work[1].IsHaveHSG = false;
StaWork.Result = false;
StaWork.State = false;
StaWork.Step = 20;
//PVar.Sta_Work[1].Step = 20;
}
break;
case 20:
if (PVar.ParList.CheckSts[17] == false)
{
if (StaWork.State == false && Gg.GetDi(0, Gg.InPut0.放料光纤感应) == 1 && Gg.GetDi(0, Gg.InPut0.安全光幕) == 0)
{
AddList("光幕启动开始！");
TimeOut = API.GetTickCount();
StaWork.Step = 30;
}
else
{
if (API.GetTickCount() - TimeOut > 1000)
{
TimeOut = API.GetTickCount();
StaWork.Step = 10;
}
}
}
else
{
if (StaWork.State == false)
{
AddList("光幕启动开始！");
TimeOut = API.GetTickCount();
StaWork.Step = 30;
}
else
{
if (API.GetTickCount() - TimeOut > 1000)
{
TimeOut = API.GetTickCount();
StaWork.Step = 10;
}
}
}
break;
case 30:
if (PVar.ParList.CheckSts[17] == false)
{
if (Gg.GetDi(0, Gg.InPut0.放料光纤感应) == 1 && Gg.GetDi(0, Gg.InPut0.安全光幕) == 1)
{
if (BVar.ProductTakeOut)
{
AddList("启动OK！");
//根据载具编号打开相对应的真空吸
BVar.OpenedVacumeNo = OpenFixtureVocume();
TimeOut = API.GetTickCount();
StaWork.Step = 40;
}
else
{
AddList("请先取出产品！");
ShowList("请先取出产品！");
//蜂鸣器
PVar.Ring_EN = true;
TimeOut = API.GetTickCount();
StaWork.Step = 1000;
}
}
else
{
if (Gg.GetDi(0, Gg.InPut0.放料光纤感应) == 0 && Gg.GetDi(0, Gg.InPut0.安全光幕) == 1)
{
TimeOut = API.GetTickCount();
StaWork.Step = 10;
}
}
}
else
{
AddList("启动OK！");
//根据载具编号打开相对应的真空吸
//BVar.OpenedVacumeNo = OpenFixtureVocume();
TimeOut = API.GetTickCount();
StaWork.Step = 50;
}
break;
case 40:
if (API.GetTickCount() - TimeOut > 1000) //延时1秒，等待真空吸信号
{
TimeOut = API.GetTickCount();
StaWork.Step = 50;
}
break;
case 50:
if (PVar.ParList.CheckSts[17] == false)
{
if (Gg.GetDi(0, BVar.OpenedVacumeNo + 5) == 1) //判断真空吸信号
{
TimeOut = API.GetTickCount();
StaWork.Step = 60;
}
else
{
if (API.GetTickCount() - TimeOut > 2000)
{
AddList("HSG真空吸没达到检测值，请检查产品是否放好！");
ShowList("HSG真空吸没达到检测值，请检查产品是否放好！");
TimeOut = API.GetTickCount();
StaWork.Step = 1000;
}
}
}
else
{
TimeOut = API.GetTickCount();
StaWork.Step = 60;
}
break;
case 60: //等待所有工位结束工作
if (PVar.ParList.CheckSts[17] == false)
{
if (PVar.Stop_Flag == false)
{
if (Gg.GetDi(0, Gg.InPut0.安全光幕) == 1 && Gg.GetDi(0, BVar.OpenedVacumeNo + 5) == 1 && PVar.Sta_Work[2].State == false && PVar.Sta_Work[3].State == false && PVar.Sta_Work[4].State == false)
{
StaWork.State = true;
CT_Start = true;
PVar.Sta_Work[1].IsHaveHSG = true;
Frm_Engineering.fEngineering.OvalShape_Sta0.BackColor = Color.DarkOrange;
Frm_Engineering.fEngineering.Chk_StaRound.BackColor = Color.DarkOrange;
if (Gg.GetPrfPos(1, 1) > 300) //int类型最大值为2^31-1=2147483647
{
gts.GT_SetPrfPos(1, 1, 0); //规划器置零
gts.GT_SetEncPos(1, 1, 0); //编码器置零
gts.GT_SynchAxisPos(1, 1 << 0); //将当前轴进行位置同步
}
AddList("转盘开始转动！");
TimeOut = API.GetTickCount();
StaWork.Step = 70;
}
else
{
if (Gg.GetDi(0, BVar.OpenedVacumeNo + 5) == 0) //判断真空吸信号
{
AddList("HSG真空吸力异常，启动失败，请重新启动！");
ShowList("HSG真空吸力异常，启动失败，请重新启动！");
TimeOut = API.GetTickCount();
StaWork.Step = 1000;
}
}
}
else
{
TimeOut = API.GetTickCount();
StaWork.Step = 1000;
}
}
else
{
if (PVar.Stop_Flag == false)
{
if (Gg.GetDi(0, Gg.InPut0.安全光幕) == 1 && PVar.Sta_Work[2].State == false && PVar.Sta_Work[3].State == false && PVar.Sta_Work[4].State == false)
{
StaWork.State = true;
CT_Start = true;
PVar.Sta_Work[1].IsHaveHSG = true;
Frm_Engineering.fEngineering.OvalShape_Sta0.BackColor = Color.DarkOrange;
Frm_Engineering.fEngineering.Chk_StaRound.BackColor = Color.DarkOrange;
if (Gg.GetPrfPosmm(1, 1) > 300) //int类型最大值为2^31-1=2147483647
{
gts.GT_SetPrfPos(1, 1, 0); //规划器置零
gts.GT_SetEncPos(1, 1, 0); //编码器置零
gts.GT_SynchAxisPos(1, 1 << 0); //将当前轴进行位置同步
}
AddList("转盘开始转动！");
TimeOut = API.GetTickCount();
StaWork.Step = 70;
}
}
else
{
TimeOut = API.GetTickCount();
StaWork.Step = 1000;
}
}
break;
case 70:
StationR_State();
Gg.StepMotion(1, 1, PVar.ParAxis.Speed[9], 90, "+");
TimeOut = API.GetTickCount();
StaWork.Step = 80;
break;
case 80:
if (Gg.ZSPD(1, 1))
{
Frm_Engineering.fEngineering.OvalShape_Sta0.BackColor = Color.FromArgb(192, 255, 192);
Frm_Engineering.fEngineering.Chk_StaRound.BackColor = Color.FromArgb(192, 255, 192);
AddList("转盘转动到位！");
TimeOut = API.GetTickCount();
StaWork.Step = 90;
}
else
{
if (API.GetTickCount() - TimeOut > 10000)
{
AddList("转盘转动超时！");
ShowList("转盘转动超时！");
TimeOut = API.GetTickCount();
StaWork.Step = 10000;
}
}
break;
case 90:
TimeOut = API.GetTickCount();
StaWork.Step = 800;
break;
case 800:
StaWork.Result = true;
StaWork.State = false;
StaWork.Step = 10;
break;
case 1000:
StaWork.Result = false;
StaWork.State = false;
StaWork.Step = 10;
break;
//严重错误，急停处理
case 10000:
Frm_Engineering.fEngineering.MacStop();
break;
}
}
catch (Exception exc)
{
string Error_Str = "";
string Error_Str1 = "";
Frm_Engineering.fEngineering.MacStop();
MessageBox.Show(exc.Message);
Error_Str = PVar.BZ_LogPath + DateTime.Now.ToString("yyyyMMdd") + "\\" + DateTime.Now.ToString("yyyyMMdd") + "_代码异常记录" + ".txt";
Error_Str1 = "\r\n" + "※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※" + "\r\n" +
"[" + DateTime.Now.ToString("HH:mm:ss") + "]" + "\r\n" + exc.ToString();
FileRw.WriteDattxt(Error_Str, Error_Str1);
}
}
/// <summary>
/// 自动运行
/// </summary>
private void AutoRun()
{
#region Switch
switch (AutoRunstep)
{
case 10:
SetStep("CLEAR", Mycolor.None);
TaskIsWorking = true;
EventShowResult(EnumShowResult.Empty);
SetStep("测试工站开始...", Mycolor.None);
AutoRunstep = 20;
break;
#region run to test postion
case 20: //运动到测试位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 2], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
SetStep("测试Y轴运动到测试点开始", Mycolor.None);
AutoRunstep = 30;
break;
case 30:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试Y轴运动到达测试位置", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = (Globals.settingMachineInfo.什么机器 == WhichMachine.IPDM) ? 70 : 40;
}
break;
case 40:
Gg.SetDo(0, Gg.OutPutMMS0.产品定位气缸电磁阀, 1);
SetStep("定位气缸打开", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 50;
break;
case 50:
if (Gg.GetDi(0, Gg.InPutMMS0.气缸到位感应器) == 1)
{
SetStep("定位气缸到定位位置", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 60;
}
else if (API.GetTickCount() - TimeOut > 2000)
{
SetStep("定位气缸缩到定位位置信号异常！", Mycolor.ErrorRed);
PostTaskAlarm(XAlarmLevel.STOP, (int)AlarmCode.载具进出气缸伸出信号异常, AlarmCategory.MOTION.ToString(), "载具进出气缸伸出信号异常");
AutoRunstep = 8000;
}
break;
case 60:
if (API.GetTickCount() - TimeOut > 300)
{
SetStep("延时300ms", Mycolor.None);
AutoRunstep = 70;
}
break;
#endregion
#region start test & collect data
case 70:
//if (Globals.settingFunc.打开SSH通信 && Globals.SSHconnSt)//SSH打开，且SSH连接成功！
{
//SSH.Instance.ExecuteCommand("/Users/gdlocal/Desktop/MMS/" + Globals.settingPara.SSH脚本名字);//运行mini脚本
SetStep("Send SSH command-start to move Motor!", Mycolor.None);
DAQ.Instance.PCI9222StartCollect(); //开始收集高度数据
SetStep("测试开始,开始收集数据", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 80;
}
//else
//{
// SetStep("SSH功能没打开，或SSH连接失败！", Mycolor.ErrorRed);
// SetStep("请确定SSH，退出测试！", Mycolor.ErrorRed);
// TimeOut = API.GetTickCount();
// AutoRunstep = 290;
//}
break;
case 80:
//if (API.GetTickCount() - TimeOut > Globals.settingPara.测试超时)
if (API.GetTickCount() - TimeOut > 2000)
{
SetStep("测试超时，退出测试！", Mycolor.ErrorRed);
TimeOut = API.GetTickCount();
DAQ.Instance.PCI9222StopCollect();
AutoRunstep = 90;
}
//if (Globals.SSHstring.Contains("Motor Run Complete"))//SSH feedback string
//{
// SetStep("收到SSH的Motor Run Complete，测试结束！", Mycolor.None);
// DAQ.Instance.PCI9222Clear();//stop collect the 9222 data
// TimeOut = API.GetTickCount();
// AutoRunstep = 90;
//}
break;
case 90: //save the raw data
ls.Clear();
string[] stringheader = new string[] { "Time", "laer_p0", "laer_p1", "laer_p2", "laer_p3", "laer_p4" };
ls.Add(stringheader);
for (int i = 0; i < DAQ.Instance.listArray[0].Count - 2; i++) //最后两组数据不要
{
string[] strarr = new string[6];
strarr[0] = DAQ.Instance.listArray[0][i].X.ToString(); //time
strarr[1] = DAQ.Instance.listArray[0][i].Y.ToString(); //laser_p0
strarr[2] = DAQ.Instance.listArray[1][i].Y.ToString(); //laser_p1
strarr[3] = DAQ.Instance.listArray[2][i].Y.ToString(); //laser_p2
strarr[4] = DAQ.Instance.listArray[3][i].Y.ToString(); //laser_p3
strarr[5] = DAQ.Instance.listArray[4][i].Y.ToString(); //laser_p4
ls.Add(strarr);
}
string path = PVar.BZ_DataPath + "MMS Data-" + Globals.settingMachineInfo.机器编号 + "\\RAW Displacement Data\\"
+ DateTime.Now.ToString("yyyyMMdd") + "\\";
if (System.IO.Directory.Exists(path) == false)
{
System.IO.Directory.CreateDirectory(path);
}
Globals.csv.WriteCSV(path + DataManager.Instance.CurrentCheckData.SN + "_" + DateTime.Now.ToString("HH_mm_ss_fff") + "_raw.csv", ls);
ls.Clear();
AutoRunstep = 100;
break;
case 100:
AutoRunstep = 110;
break;
case 110:
AutoRunstep = 120;
break;
case 120:
AutoRunstep = 200;
break;
case 200:
AutoRunstep = 210;
break;
case 210:
SetStep("显示测试数据", Mycolor.None);
#region 产生数据 1tray
// "装配时间", "产品条码", "Result", "X", "Y", "A", "Dis"
DataManager.Instance.CurrentCheckData.StartDate = DateTime.Now.ToString("yyyy-MM-dd");
DataManager.Instance.CurrentCheckData.StartTime = DateTime.Now.ToString("HH:mm:ss");
Random rd = new Random();
double m_A = DataManager.Instance.CurrentCheckData.Mod_Brc_A = rd.Next(-1, 1) / 10.0 + rd.Next(-1, 1) / 100.00;
double m_cc = DataManager.Instance.CurrentCheckData.Mod_Brc_CC = 22 + rd.Next(-1, 1) / 100.0 + rd.Next(0, 1) / 1000.00;
double m_x = DataManager.Instance.CurrentCheckData.Mod_Brc_X = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
double m_y = DataManager.Instance.CurrentCheckData.Mod_Brc_Y = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
if (tempi % 2 == 1)
{
DataManager.Instance.CurrentCheckData.PASS = true;
DataManager.Instance.CurrentCheckData.PDCAPASS = true;
SetStep("the result is Passed", Color.LimeGreen);
EventShowResult(EnumShowResult.OK);
DataManager.Instance.currentyield.AddOneResult(true); //update the current yield and month yield
}
else
{
DataManager.Instance.CurrentCheckData.PASS = false;
DataManager.Instance.CurrentCheckData.PDCAPASS = false;
SetStep("the result is Failed", Color.Red);
EventShowResult(EnumShowResult.NG);
DataManager.Instance.currentyield.AddOneResult(false); //update the current yield and month yield
}
DataManager.Instance.chartData.Adddata(m_A.ToString() + "," + m_x.ToString() + "," + m_y.ToString() + "," + m_cc.ToString()); //AddData为更新生产的CPK数据 AddNewData为UPH数据，包括很多东西
DataManager.Instance.uph.UPHupdate(); //UPH update by hour
if (OnCurrentInf != null)
{
OnCurrentInf(DataManager.Instance.CurrentCheckData); //给工程界面的数据显示
}
if (OnFlashDataPage != null)
{
OnFlashDataPage();
}
tempi++;
#endregion
AutoRunstep = 220;
break;
case 220: //PDCA
DataManager.Instance.CurrentCheckData.Operator_ID = "0";
DataManager.Instance.CurrentCheckData.Mode = "0";
DataManager.Instance.CurrentCheckData.TestSeriesID = "'201805070859";
DataManager.Instance.CurrentCheckData.Prioriyt = "0";
PDCA_data[0] = DataManager.Instance.CurrentCheckData.Mod_Brc_X.ToString();
PDCA_data[1] = DataManager.Instance.CurrentCheckData.Mod_Brc_Y.ToString();
PDCA_data[2] = DataManager.Instance.CurrentCheckData.Mod_Brc_A.ToString();
PDCA_data[3] = DataManager.Instance.CurrentCheckData.Mod_Brc_CC.ToString();
PDCA_data[4] = DataManager.Instance.CurrentCheckData.Operator_ID.ToString();
PDCA_data[5] = DataManager.Instance.CurrentCheckData.Mode.ToString();
PDCA_data[6] = DataManager.Instance.CurrentCheckData.TestSeriesID.ToString();
PDCA_data[7] = DataManager.Instance.CurrentCheckData.Prioriyt.ToString();
PDCA_Step = 10;
AutoRunstep = 240;
break;
case 230: //PDCA
if (PDCA_Bali(PDCA_data) == FunctionStatus.Finish)
{
DataManager.Instance.CurrentCheckData.PDCAPASS = true;
AutoRunstep = 240;
}
else if (PDCA_Bali(PDCA_data) == FunctionStatus.Error)
{
DataManager.Instance.CurrentCheckData.PDCAPASS = false;
AutoRunstep = 240;
}
break;
case 240:
#region 从测试数据中取值,保留生产数据
path = PVar.BZ_DataPath + "MMS Data-" + Globals.settingMachineInfo.机器编号 + "\\PDCA Data\\"
+ DateTime.Now.ToString("yyyyMM") + "\\";
StringBuilder stringBuilder = new StringBuilder();
stringBuilder.Clear();
stringBuilder.Append("" + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.StartDate + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.StartTime + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.SN + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.PASS + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.PDCAPASS + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Mod_Brc_X + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Mod_Brc_Y + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Mod_Brc_A + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Mod_Brc_CC + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Operator_ID + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Mode + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.TestSeriesID + ",");
stringBuilder.Append(DataManager.Instance.CurrentCheckData.Prioriyt + ",");
string pathtemp = path + DateTime.Now.ToString("yyyyMMdd") + "_PDCA_Data.csv";
#region save the csv header
if (File.Exists(pathtemp) == false)
{
StringBuilder stringBuilderHeader = new StringBuilder();
stringBuilderHeader.Clear();
stringBuilderHeader.Append(" ,StartDate,StartTime,SN,Result,PDCA_Result,X,Y,A,CC,Operator_ID,Mode,TestSeriesID,Prioriyt,\t\n");
stringBuilderHeader.Append("Upper Limit,NA,NA,NA,NA,NA,1,2,3,4,\t\n");
stringBuilderHeader.Append("Lower Limit,NA,NA,NA,NA,NA,-1,-2,-3,-4,\t\n");
stringBuilderHeader.Append("Units,NA,NA,NA,NA,NA,mm,mm,mm,mm,");
CsvServer.Instance.WriteLine(pathtemp, stringBuilderHeader.ToString());
stringBuilderHeader.Clear();
}
#endregion
CsvServer.Instance.WriteLine(pathtemp, stringBuilder.ToString());
stringBuilder.Clear();
#endregion
AutoRunstep = 290;
break;
case 290:
DAQ.Instance.PCI9222StopCollect();
AutoRunstep = 300;
break;
#endregion
#region back to wait postion
case 300:
Gg.SetDo(0, Gg.OutPutMMS0.产品定位气缸电磁阀, 0);
SetStep("定位气缸复位......", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = (Globals.settingMachineInfo.什么机器 == WhichMachine.IPDM) ? 320 : 310;
break;
case 310:
if (Gg.GetDi(0, Gg.InPutMMS0.气缸缩回位置感应器) == 1)
{
SetStep("定位气缸在缩回位置", Mycolor.None);
AutoRunstep = 320;
}
else if (API.GetTickCount() - TimeOut > 2000)
{
SetStep("定位气缸缩回位置信号异常！", Mycolor.ErrorRed);
PostTaskAlarm(XAlarmLevel.STOP, (int)AlarmCode.载具进出气缸缩回信号异常, AlarmCategory.MOTION.ToString(), "载具进出气缸缩回信号异常");
AutoRunstep = 8000;
}
break;
case 320: //等待位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 0], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
AutoRunstep = 330;
break;
case 330:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试y轴运动到初始位置成功…", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 2000;
}
break;
#endregion
case 2000:
StaStop = false;
StopWatch_Stop(); //stop the CT count
AutoRunstep = 0;
TaskIsWorking = false;
SetStep("SAVE", Mycolor.None);
PostTaskAlarm(XAlarmLevel.RST, (int)AlarmCode.位, AlarmCategory.RESET.ToString(), "RST"); //for errorcode
break;
case 8000:
DAQ.Instance.PCI9222Clear();
SetStep("此步为异常，退出循环", Mycolor.None);
AutoRunstep = 0;
StopWatch_Stop(); //stop the CT count
TaskIsWorking = false;
SetStep("SAVE", Mycolor.None);
return;
}
SetStepNum(AutoRunstep);
Task_StopWatchElapsedMilliseconds();//获取CT
#endregion
}
/// <summary>
/// 空跑
/// </summary>
private void DryRun()
{
#region Switch
switch (AutoRunstep)
{
case 10:
SetStep("CLEAR", Mycolor.None);
TaskIsWorking = true;
EventShowResult(EnumShowResult.Empty);
SetStep("AutoRun Setp10", Mycolor.None);
AutoRunstep = 20;
break;
case 20:
SetStep("AutoRun Setp20", Mycolor.None);
AutoRunstep = 30;
break;
case 30:
Thread.Sleep(1);
SetStep("AutoRun Setp30", Mycolor.None);
AutoRunstep = 40;
break;
case 40:
Thread.Sleep(10);
SetStep("AutoRun Setp40", Mycolor.None);
AutoRunstep = 50;
break;
case 50: //等待位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 0], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
AutoRunstep = 60;
break;
case 60:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试y轴运动到初始位置成功…", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 70;
}
break;
case 70:
if (API.GetTickCount() - TimeOut > 300)
{
AutoRunstep = 80;
}
break;
case 80: //测试位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 2], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
AutoRunstep = 90;
break;
case 90:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试y轴运动到测试位置成功…", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 100;
}
break;
case 100:
if (API.GetTickCount() - TimeOut > 300)
{
AutoRunstep = 110;
}
break;
case 110:
Gg.SetDo(0, Gg.OutPutMMS0.产品定位气缸电磁阀, 1);
SetStep("定位气缸打开......", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 120;
break;
case 120:
if (Gg.GetDi(0, Gg.InPutMMS0.气缸到位感应器) == 1)
{
SetStep("定位气缸到定位位置", Mycolor.None);
AutoRunstep = 150;
}
else if (API.GetTickCount() - TimeOut > 2000)
{
SetStep("定位气缸缩到定位位置信号异常！", Mycolor.ErrorRed);
PostTaskAlarm(XAlarmLevel.STOP, (int)AlarmCode.载具进出气缸伸出信号异常, AlarmCategory.MOTION.ToString(), "载具进出气缸伸出信号异常");
AutoRunstep = 8000;
}
break;
case 150:
SetStep("测试开始.....", Mycolor.None);
Thread.Sleep(2000);
AutoRunstep = 180;
break;
case 180:
Gg.SetDo(0, Gg.OutPutMMS0.产品定位气缸电磁阀, 0);
SetStep("定位气缸复位......", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 190;
break;
case 190:
if (Gg.GetDi(0, Gg.InPutMMS0.气缸缩回位置感应器) == 1)
{
SetStep("定位气缸在缩回位置", Mycolor.None);
AutoRunstep = 200;
}
else if (API.GetTickCount() - TimeOut > 2000)
{
SetStep("定位气缸缩回位置信号异常！", Mycolor.ErrorRed);
PostTaskAlarm(XAlarmLevel.STOP, (int)AlarmCode.载具进出气缸缩回信号异常, AlarmCategory.MOTION.ToString(), "载具进出气缸缩回信号异常");
AutoRunstep = 8000;
}
break;
case 200:
uint pck;
uint pck2;
gts.GT_GetClockHighPrecision(0, out pck);
Thread.Sleep(5);
gts.GT_GetClockHighPrecision(0, out pck2);
uint ctt = pck2 - pck;
SetStep("AutoRun Setp60", Mycolor.None);
AutoRunstep = 210;
break;
case 210:
Thread.Sleep(1000);
SetStep("AutoRun Setp70", Mycolor.None);
#region 产生数据 1tray
// "装配时间", "产品条码", "Result", "X", "Y", "A", "Dis"
DataManager.Instance.CurrentCheckData.SN = "SNXXXXXXX";
DataManager.Instance.CurrentCheckData.StartDate = DateTime.Now.ToString("yyyy-MM-dd");
DataManager.Instance.CurrentCheckData.StartTime = DateTime.Now.ToString("HH:mm:ss");
Random rd = new Random();
if (Globals.settingMachineInfo.什么机器 == WhichMachine.IPDM)
{
double left1 = DataManager.Instance.CurrentCheckData.IPD_Left1 = rd.Next(-1, 1) / 10.0 + rd.Next(-1, 1) / 100.00;
double left2 = DataManager.Instance.CurrentCheckData.IPD_Right1 = 22 + rd.Next(-1, 1) / 100.0 + rd.Next(0, 1) / 1000.00;
double Right1 = DataManager.Instance.CurrentCheckData.Mod_Brc_X = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
double Right2 = DataManager.Instance.CurrentCheckData.Mod_Brc_Y = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
DataManager.Instance.chartData.Adddata(left1.ToString() + "," + Right1.ToString() + "," + left2.ToString() + "," + Right2.ToString()); //AddData为更新生产的CPK数据 AddNewData为UPH数据，包括很多东西
}
else
{
double m_A = DataManager.Instance.CurrentCheckData.Mod_Brc_A = rd.Next(-1, 1) / 10.0 + rd.Next(-1, 1) / 100.00;
double m_cc = DataManager.Instance.CurrentCheckData.Mod_Brc_CC = 22 + rd.Next(-1, 1) / 100.0 + rd.Next(0, 1) / 1000.00;
double m_x = DataManager.Instance.CurrentCheckData.Mod_Brc_X = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
double m_y = DataManager.Instance.CurrentCheckData.Mod_Brc_Y = rd.Next(-1, 1) / 100.0 + rd.Next(-1, 1) / 1000.00;
DataManager.Instance.chartData.Adddata(m_A.ToString() + "," + m_x.ToString() + "," + m_y.ToString() + "," + m_cc.ToString()); //AddData为更新生产的CPK数据 AddNewData为UPH数据，包括很多东西
}
if (tempi % 2 == 1)
{
DataManager.Instance.CurrentCheckData.PASS = true;
DataManager.Instance.CurrentCheckData.PDCAPASS = true;
SetStep("the result is Passed", Color.LimeGreen);
EventShowResult(EnumShowResult.OK);
DataManager.Instance.currentyield.AddOneResult(true); //update the current yield and month yield
}
else
{
DataManager.Instance.CurrentCheckData.PASS = false;
DataManager.Instance.CurrentCheckData.PDCAPASS = false;
SetStep("the result is Failed", Color.Red);
EventShowResult(EnumShowResult.NG);
DataManager.Instance.currentyield.AddOneResult(false); //update the current yield and month yield
}
DataManager.Instance.uph.UPHupdate(); //UPH update by hour
if (OnCurrentInf != null)
{
OnCurrentInf(DataManager.Instance.CurrentCheckData); //给工程界面的数据显示
}
if (OnFlashDataPage != null)
{
OnFlashDataPage();
}
tempi++;
#endregion
AutoRunstep = 220;
break;
case 220: //等待位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 0], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
AutoRunstep = 230;
break;
case 230:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试y轴运动到初始位置成功…", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 2000;
}
break;
case 2000:
Thread.Sleep(100);
SetStep("AutoRun Setp80", Mycolor.None);
StaStop = false;
StopWatch_Stop(); //stop the CT count
AutoRunstep = 0;
TaskIsWorking = false;
SetStep("SAVE", Mycolor.None);
PostTaskAlarm(XAlarmLevel.RST, (int)AlarmCode.位, AlarmCategory.RESET.ToString(), "RST"); //for errorcode
break;
case 8000:
Thread.Sleep(1);
SetStep("AutoRun Setp8000", Mycolor.None);
AutoRunstep = 0;
StopWatch_Stop(); //stop the CT count
TaskIsWorking = false;
return;
}
SetStepNum(AutoRunstep);
Task_StopWatchElapsedMilliseconds();//获取CT
#endregion
}
private FunctionStatus InitHoming()
{
switch (InitHomingStep)
{
case 10:
AutoRunstep = 0;
Gg.Set_Servo(0, BVar.MMSY, true); //open servo on
Thread.Sleep(200);
SetStep("开始回零.......", Mycolor.None);
InitHomingStep = 15;
break;
case 15:
Gg.SetDo(0, Gg.OutPutMMS0.产品定位气缸电磁阀, 0);
SetStep("定位气缸复位......", Mycolor.None);
InitHomingDelay.InitialTime();
InitHomingStep = 20;
break;
case 20:
if (Gg.GetDi(0, Gg.InPutMMS0.气缸缩回位置感应器) == 1)
{
SetStep("定位气缸在缩回位置", Mycolor.None);
InitHomingStep = 30;
}
else if (InitHomingDelay.TimeIsUp(2000))
{
SetStep("定位气缸缩回位置信号异常！", Mycolor.ErrorRed);
PostTaskAlarm(XAlarmLevel.STOP, (int)AlarmCode.载具进出气缸缩回信号异常, AlarmCategory.MOTION.ToString(), "载具进出气缸缩回信号异常");
InitHomingStep = 8000;
}
break;
case 30:
SetStep("测试y轴开始回原点…", Mycolor.None);
GoHome.Instance.AxisHome[0, 1].Result = false;
GoHome.Instance.AxisHome[0, 1].Enable = true;
GoHome.Instance.AxisHome[0, 1].Step = 10;
TimeOut = API.GetTickCount();
InitHomingStep = 40;
break;
case 40:
GoHome.GotoHome(0, 1, 30, -1000, 5, 1, 10);
if (GoHome.Instance.AxisHome[0, 1].Step == 0 && GoHome.Instance.AxisHome[0, 1].Enable)
{
GoHome.Instance.AxisHome[0, 1].Enable = false;
if (GoHome.Instance.AxisHome[0, 1].Result)
{
SetStep("测试y轴回原点成功…", Mycolor.None);
InitHomingStep = 50;
}
else
{
SetStep("测试y轴回原点失败…", Mycolor.ErrorRed);
InitHomingStep = 8000;
}
}
break;
case 50: //等待位置
Gg.AbsMotion(0, BVar.MMSY, mFunction.Pos.TeachAxis1[0, 0], PVar.ParAxis.Speed[BVar.MMSY]);
TimeOut = API.GetTickCount();
InitHomingStep = 60;
break;
case 60:
if (Gg.ZSPD(0, BVar.MMSY))
{
SetStep("测试y轴运动到初始位置成功…", Mycolor.None);
InitHomingStep = 2000;
}
break;
case 2000:
InitHomingStep = 0;
SetStep("MMS测试工站复位OK!", Mycolor.None);
SetState(XTaskState.WAITRUN);
SetStepNum(InitHomingStep);
HomeOK = true;
PVar.LampStatus = 20;
PostTaskAlarm(XAlarmLevel.RST, (int)AlarmCode.位, AlarmCategory.RESET.ToString(), "RST"); //for errorcode
return(FunctionStatus.Finish);
case 8000:
InitHomingStep = 0;
PVar.LampStatus = 10;
return(FunctionStatus.Error);
}
SetStepNum(InitHomingStep);
return(FunctionStatus.Working);
}
public static short mGetDi(short CardTag, short index)
{
// CardIndex CardInfo
//控件 TabIndex 代表卡类型， Tag(A,B) A代表卡号，B代表模块序号（0-15）；
//CardType=0 固高卡自带IO,CardType=1 固高卡扩展IO。
int CardType = 0;
string CardInfo = "0,0";
short CardIndex = 0;
short CardNum = 0;
ushort ReturnStr = 0;
short mGetDiValue = -1;
switch (CardTag)
{
case 0: //0号输入单元
CardType = 0;
CardInfo = "0,0";
break;
case 1: //0号输入单元
CardType = 0;
CardInfo = "1,0";
break;
case 2:
CardType = 1;
CardInfo = "0,0"; //卡号，index
break;
case 3:
CardType = 1;
CardInfo = "0,1"; //卡号，index
break;
case 4:
CardType = 1;
CardInfo = "0,2"; //卡号，index
break;
}
CardNum = System.Convert.ToInt16(CardInfo.Substring(0, 1));
CardIndex = System.Convert.ToInt16(CardInfo.Substring(CardInfo.Length - 1, 1));
try
{
switch (CardType)
{
case 0: //固高卡自带通用输入
mGetDiValue = Gg.GetDi(CardNum, index);
break;
case 1: //固高卡扩展输入
PVar.Rtn = gts.GT_GetExtIoBitGts(CardNum, CardIndex, index, ref ReturnStr);
mGetDiValue = (short)Math.Abs(ReturnStr - 1);
break;
}
}
catch (Exception)
{
mGetDiValue = -1;
}
return(mGetDiValue);
}
private void AutoRun()
{
#region Swithch
switch (AutoRunstep)
{
case 10:
if (PVar.AutoRunFlag)
{
StopWatch_Stop();
StopWatch_Reset();
AutoRunstep = 20;
}
break;
case 20: //double start
if (Globals.Flag_ManualStart || Double_Hands_Start(1000, false))
{
Globals.Flag_ManualStart = false;
Double_Hands_Start(1000, true);
SetStep("CLEAR", Mycolor.None);
SetStep("手动启动或双手启动开始", Mycolor.None);
TaskIsWorking = true;
StopWatch_Start();
AutoRunstep = 25;
}
break;
case 25:
if (Globals.settingFunc.启用空跑模式) //空跑不需要条码
{
AutoRunstep = 40;
}
else
{
AutoRunstep = 30;
}
break;
case 30: //check the product sensor and check the fixtrue closed sensor
if (Gg.GetDi(0, Gg.InPutMMS0.夹具到位金属感应器) == 0)
{
SetStep("夹具到位金属感应器感应异常", Mycolor.ErrorRed);
PVar.Ring_EN = true; //buzzer
AutoRunstep = 8000;
break;
}
if (Gg.GetDi(0, Gg.InPutMMS0.产品到位光纤感应器) == 0)
{
SetStep("产品到位光纤感应器感应异常", Mycolor.ErrorRed);
PVar.Ring_EN = true; //buzzer
AutoRunstep = 8000;
break;
}
AutoRunstep = 40;
break;
case 40: //check postion
if ((Gg.GetEncPosmm(0, BVar.MMSY) - mFunction.Pos.TeachAxis1[0, 0]) > 0.05)
{
SetStep("载具不在初始位置！请回零！", Mycolor.ErrorRed);
PVar.Ring_EN = true; //buzzer
AutoRunstep = 8000;
break;
}
AutoRunstep = 50;
break;
case 45:
if (Gg.GetDi(0, Gg.InPutMMS0.安全光幕) == 1)
{
SetStep("安全光幕异常", Mycolor.ErrorRed);
PVar.Ring_EN = true; //buzzer
AutoRunstep = 8000;
break;
}
AutoRunstep = 50;
break;
case 50: //check barcode
if (Globals.settingFunc.启用空跑模式) //空跑不需要条码
{
AutoRunstep = 80; break;
}
if (PageLogin.loginTp != loginType.Op)
{
if ((Globals.BarcodeSN.Length >= Globals.settingPara.学习条码长度.Length - 2 || Globals.BarcodeSN.Length >= Globals.settingPara.学习条码长度.Length + 2))
{
SetStep("条码长度OK！", Mycolor.None);
DataManager.Instance.CurrentCheckData.SN = Globals.BarcodeSN;
}
else
{
SetStep("生成时间条码！", Mycolor.None);
DataManager.Instance.CurrentCheckData.SN = DateTime.Now.ToString("yyyMMdd_HHmmss");
}
TimeOut = API.GetTickCount();
AutoRunstep = 80;
}
else //op
{
if ((Globals.BarcodeSN.Length >= Globals.settingPara.学习条码长度.Length - 5 ||
Globals.BarcodeSN.Length >= Globals.settingPara.学习条码长度.Length + 5)) //OP mode ,need check the length of barcode
{
SetStep("条码长度OK！", Mycolor.None);
PVar.Ring_EN = true; //buzzer
DataManager.Instance.CurrentCheckData.SN = Globals.BarcodeSN;
TimeOut = API.GetTickCount();
AutoRunstep = 80;
}
else
{
SetStep("条码长度异常！", Mycolor.ErrorRed);
DataManager.Instance.CurrentCheckData.SN = "";
if (OnEngineerSN != null)
{
OnEngineerSN(""); //让工程界面的clear SN, foucs on
}
AutoRunstep = 8000;
}
}
break;
case 80:
if (OnShowSth_OnSSH_Output != null)
{
OnShowSth_OnSSH_Output(""); //clear SSHinfo
}
if (OnEngineerSN != null)
{
OnEngineerSN(""); //让工程界面的clear SN, foucs on
}
Globals.BarcodeSN = "";
if (Globals.settingFunc.启用空跑模式)
{
StopWatch_Reset();
StopWatch_Start();
SetStep("CLEAR", Mycolor.None);
}
StationRunMode _runmode = Globals.settingFunc.启用空跑模式 ? StationRunMode.空跑 : StationRunMode.自动运行;
if (Globals.settingMachineInfo.什么机器 == WhichMachine.MMS)
{
XTaskManager.Instance.FindTaskById((int)TasksId.MMS测试).TaskGo();
}
else
{
XTaskManager.Instance.FindTaskById((int)TasksId.测试).TaskGo();
}
SetStep("每站自动开始", Mycolor.None);
TimeOut = API.GetTickCount();
AutoRunstep = 90;
break;
case 90:
if (Globals.settingMachineInfo.什么机器 == WhichMachine.MMS)
{
if (XTaskManager.Instance.FindTaskById((int)TasksId.MMS测试).TaskIsWorking == false)
{
SetStep("自动单循环完成", Mycolor.None);
AutoRunstep = 100;
}
}
else
{
if (XTaskManager.Instance.FindTaskById((int)TasksId.测试).TaskIsWorking == false)
{
SetStep("自动单循环完成", Mycolor.None);
AutoRunstep = 100;
}
}
if (API.GetTickCount() - TimeOut > 60000)
{
SetStep("自动超时60S,退出主循环！！", Mycolor.ErrorRed);
AutoRunstep = 8000;
}
break;
case 100:
StopWatch_Stop();
TaskIsWorking = false;
AutoRunstep = 10; //正常结束
if (Globals.settingFunc.启用空跑模式)
{
SetStep("空跑模式，继续", Mycolor.ErrorRed);
Thread.Sleep(1000);
AutoRunstep = 80;
if (StaStop) //如果点了停止按钮，把当前的Cycle完成
{
SetStep("停止中......", Mycolor.ErrorRed);
Globals.Flag_ManualStart = false;
StaStop = false;
AutoRunstep = 10;
}
}
break;
case 8000:
StopWatch_Stop();
TaskIsWorking = false;
AutoRunstep = 10;
break;
}
SetStepNum(AutoRunstep);
Task_StopWatchElapsedMilliseconds();//获取CT
#endregion
}